PartDesign Thickness: Difference between revisions
(added hint for better modeling features for complex shapes) |
(clarified wording for complex shapes hint) |
||
Line 41: | Line 41: | ||
* The thickness value may not exceed the smallest face height of the Body. |
* The thickness value may not exceed the smallest face height of the Body. |
||
* The command may fail with complex shapes. |
* The command may fail with complex shapes. |
||
** [https://www.freecadweb.org/wiki/PartDesign_AdditivePipe PartDesign Additive Pipe] or [https://www.freecadweb.org/wiki/PartDesign_AdditiveLoft PartDesign Additive Loft] may work better |
** [https://www.freecadweb.org/wiki/PartDesign_AdditivePipe PartDesign Additive Pipe] or [https://www.freecadweb.org/wiki/PartDesign_AdditiveLoft PartDesign Additive Loft] may work better to create complex shapes |
||
==Example== <!--T:11--> |
==Example== <!--T:11--> |
Revision as of 09:06, 4 February 2019
PartDesign Thickness |
Menu location |
---|
Part Design → Thickness |
Workbenches |
PartDesign |
Default shortcut |
None |
Introduced in version |
- |
See also |
Part Thickness |
Description
The Thickness tool works on a solid Body and transforms it into a thick-walled hollow object with at least one open face, giving to each of its remaining faces a uniform thickness. On some solids it allows you to significantly speed up the work, and avoids making extrusions and pockets.
How to use
- Select one or more face(s) on the active Body.
- Press the Thickness button.
- Define the Thickness parameters (see Options).
- To add more faces to open, press the Add face button and select a face in the 3D view.
- To remove a previously select face, press the Remove face button and select a face in the 3D view, or right-click on the Face label in the list and select Remove.
- Press OK.
Options
- Thickness: Wall thickness of the resulting object. Set the desired value.
- Mode
- Skin: Select this option if you want to get an item like a vase, headless but with the bottom
- Pipe: Select this option if you want to get an object like a pipe, headless and bottomless. In this case it may be convenient to select the faces to be deleted before you start the tool. Helping with predefined views buttons or use the numeric keys.
- Recto Verso:
- Join Type
- Arc: removes the outer edges and creates a fillet with a radius equal to the defined thickness.
- Intersection: when faces are offset outward, sharp edges are kept between faces.
- Make thickness inwards: when checked, faces are offset inward.
Limitations
- At least one face to be opened must be selected.
- The thickness value may not exceed the smallest face height of the Body.
- The command may fail with complex shapes.
- PartDesign Additive Pipe or PartDesign Additive Loft may work better to create complex shapes
Example
- Create a Pad from the sketch
- Create a second sketch on the XY plane
- Create a second Pad from the second sketch
As in the following pictures:
Then
Result:
Known Errors
- BRep_API: command not done
- BRep_Tool:: no parameter on edge
- Silently Fails