PartDesign Субтрактивный профиль по траектории
Субтрактивный трубный профиль |
Системное название |
---|
PartDesign_SubtractivePipe |
Расположение в меню |
Part Design → Create a substractive feature → Субтрактивный трубный профиль |
Верстаки |
PartDesign |
Быстрые клавиши |
Нет |
Представлено в версии |
0.17 |
См. также |
Аддитивный трубный профиль, Субтрактивный профиль |
Описание
Субтрактивный трубный профиль создает субтрактивное твердое тело в активном теле, перемещая один или несколько эскизов (также называемых поперечными сечениями) по открытому или замкнутому контуру. После чего созанная форма вычитается из существующего твердого тела. Субтрактивный трубный профиль часто применяется совместно с инструментами: спираль и связующая форма для создания резьбы; подробности см. в руководстве по созданию резьбы.
Применение
- Press the Subtractive pipe button.
- In the Select feature dialog, select a sketch to be used as first cross-section and click OK.
- Alternatively, a sketch or a face of a 3D object (introduced in version 0.20) can be selected prior to pressing the Subtractive pipe button.
- In the Pipe parameters under Profile, press the Object button.
- Select the sketch to be used as path in the 3D view:
- Alternatively, edges of the body can be selected by pressing Add Edge and selecting edges in the 3D view.
- To use more than one cross-section, under Section transformation set the Transform mode to Multisection; press Add Section then select a sketch in the 3D view. Repeat for each additional cross-section.
- Set options if needed and click OK.
Опции
Section Transformation:
- Select Constant to use a single profile
- Select Multisection to use multiple profiles
Section Orientation:
- Standard
- This keeps the cross section shape perpendicular to the path. This is the default setting.
- Fixed
- Orientation set by first profile and constant throughout. This deactivates the alignment to the path normal vector. That means that the cross-section shape will not rotate with the path. Sweep along a circle to see the effect.
- Frenet
- Create minimum possible twisting of profile. For more info, see Frenet-Serret Formulas
- Auxiliary
- Specify secondary path to guide pipe.
- For each point P along the sweep path, there will be a corresponding point Q on the auxiliary path.
- As the profile is swept, it will be transformed such that the PQ line is the normal of the sweep path.
- If Curvelinear equivalence is set, then the Q points are scaled proportionally along the sweep path, regardless of is length.
- Binormal
- Specify binormal vector in X, Y and Z
Corner Transition
- Transformed
- Right
- Rounded
Свойства
- ДанныеLabel: name given to the operation, this name can be changed at convenience.
- ДанныеRefine: true or false. If set to true, cleans the solid from residual edges left by features. See Part RefineShape for more details.
- ДанныеSections: lists the sections used.
- ДанныеSpine Tangent: true or false (default). True extends the path to include tangent edges.
- ДанныеAuxiliary Spine Tangent: true or false (default). True extends the auxiliary path to include tangent edges.
- ДанныеAuxiliary Curvelinear: true or false (default). True calculates normal between equidistant points on both spines.
- ДанныеMode: profile mode. See Options.
- ДанныеBinormal: binormal vector for corresponding orientation mode.
- ДанныеTransition: transition mode. Options are Transformed, Right Corner or Round Corner.
- ДанныеTransformation: Constant uses a single cross-section. Multisection uses two or more cross-sections. Linear, S-shape and Interpolation are currently not functional.
Notes
- Эскизы, используемые для поперечных сечений, должны образовывать замкнутые профили.
- Невозможно использовать вершину в качестве поперечного сечения.
- Поперечное сечение не может лежать в той же плоскости, что и непосредственно предшествующее ему.
- Чтобы лучше контролировать форму трубы, рекомендуется, чтобы все поперечные сечения имели одинаковое количество сегментов. Например, для трубы между прямоугольником и окружностью окружность может быть разбита на 4 соединенные дуги.
PartDesign
- Инструменты структуры: Part, Group
- Вспомогательные инструменты: Create body, Create sketch, Edit sketch, Map sketch to face
- Инструменты моделирования
- Инструменты данных: Create a datum point, Create a datum line, Create a datum plane, Create a local coordinate system, Create a shape binder, Create a clone
- Аддитивные инструменты: Pad, Revolution, Additive loft, Additive pipe, Additive box, Additive cone, Additive cylinder, Additive ellipsoid, Additive prism, Additive sphere, Additive torus, Additive wedge
- Субстрактивные инструменты: Pocket, Hole, Groove, Subtractive loft, Subtractive pipe, Subtractive box, Subtractive cone, Subtractive cylinder, Subtractive ellipsoid, Subtractive prism, Subtractive sphere, Subtractive torus, Subtractive wedge
- Инструменты трансформации: Mirrored, Linear Pattern, Polar Pattern, Create MultiTransform
- Отделочные инструменты: Fillet, Chamfer, Draft, Thickness
- Бинарные: Boolean operation
- Дополнительно: Migrate, Shaft design wizard, Involute gear
- Инструменты контекстного меню: Set tip, Move object to other body, Move object after other object
Документация пользователя
- Начинающим
- Установка: Загрузка, Windows, Linux, Mac, Дополнительных компонентов, Docker, AppImage, Ubuntu Snap
- Базовая: О FreeCAD, Интерфейс, Навигация мыши, Методы выделения, Имя объекта, Настройки, Верстаки, Структура документа, Свойства, Помоги FreeCAD, Пожертвования
- Помощь: Учебники, Видео учебники
- Верстаки: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Start, Surface, TechDraw, Test Framework, Web