PartDesign Субтрактивный Цилиндр
PartDesign SubtractiveCylinder |
Menu location |
---|
Part Design → Create a subtractive primitive → Subtractive Cylinder |
Workbenches |
PartDesign |
Default shortcut |
None |
Introduced in version |
0.17 |
See also |
Create a subtractive primitive, Additive Cylinder |
Описание
Вставляет субтрактивный цилиндр в активное Тело. Его форма вычитается из существующего тела.
"Слева: активное тело (A) показано серым цветом, а субтрактивный цилиндр (B) показан прозрачным красным цветом; результат справа."
Применение
- Press the Subtractive Cylinder button. Note: the Subtractive Cylinder is part of an icon menu labelled Create an subtractive primitive. After launching FreeCAD, the Subtractive Box is the one displayed in the toolbar. To get to the Cylinder button, click on the down arrow besides the visible icon and select Subtractive cylinder in the menu.
- Set the Primitive parameters and Attachment.
- Click OK.
- A Cylinder feature appears under the active Body.
Опции
It is possible to create skewed prisms by specifying angles in respect to the normal vector of the chosen attachment. introduced in version 0.20
The Cylinder can be edited after its creation in two ways:
- Double-clicking it in the Model tree, or by right-clicking and selecting Edit primitive in the contextual menu; this brings up the Primitive parameters.
- Via the Property editor.
Свойства
- ДанныеAttachment: defines the attachment mode as well as the Attachment Offset. See Part EditAttachment.
- ДанныеLabel: label given to the Cylinder object. Change to suit your needs.
- ДанныеRadius: the radius value of the cylinder.
- ДанныеAngle: angle of rotation of the cross section (360 degrees forms a full cylinder).
- ДанныеHeight: the length of the cylinder along its axis.
- ДанныеFirst Angle: angle in first direction. introduced in version 0.20
- ДанныеSecond Angle: angle in second direction. introduced in version 0.20
PartDesign
- Инструменты структуры: Part, Group
- Вспомогательные инструменты: Create body, Create sketch, Edit sketch, Map sketch to face
- Инструменты моделирования
- Инструменты данных: Create a datum point, Create a datum line, Create a datum plane, Create a local coordinate system, Create a shape binder, Create a clone
- Аддитивные инструменты: Pad, Revolution, Additive loft, Additive pipe, Additive box, Additive cone, Additive cylinder, Additive ellipsoid, Additive prism, Additive sphere, Additive torus, Additive wedge
- Субстрактивные инструменты: Pocket, Hole, Groove, Subtractive loft, Subtractive pipe, Subtractive box, Subtractive cone, Subtractive cylinder, Subtractive ellipsoid, Subtractive prism, Subtractive sphere, Subtractive torus, Subtractive wedge
- Инструменты трансформации: Mirrored, Linear Pattern, Polar Pattern, Create MultiTransform
- Отделочные инструменты: Fillet, Chamfer, Draft, Thickness
- Бинарные: Boolean operation
- Дополнительно: Migrate, Shaft design wizard, Involute gear
- Инструменты контекстного меню: Set tip, Move object to other body, Move object after other object
Документация пользователя
- Начинающим
- Установка: Загрузка, Windows, Linux, Mac, Дополнительных компонентов, Docker, AppImage, Ubuntu Snap
- Базовая: О FreeCAD, Интерфейс, Навигация мыши, Методы выделения, Имя объекта, Настройки, Верстаки, Структура документа, Свойства, Помоги FreeCAD, Пожертвования
- Помощь: Учебники, Видео учебники
- Верстаки: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Start, Surface, TechDraw, Test Framework, Web