PartDesign SubtractiveCone/it

Cono sottrattivo
Posizione nel menu
Part Design → Crea una primitiva sotttrattiva → Cono
Ambiente
PartDesign
Avvio veloce
Nessuno
Introdotto nella versione
-
Vedere anche
Primitive sottrattive

Descrizione

Inserisce un cono sottrattivo nel corpo attivo. La sua forma viene sottratta dal solido esistente.

disponibile dalla versione 0.17

On the left: active body (A) shown in grey and subtractive cone (B) shown in transparent red; result on the right.

How to use

1. Press the Subtractive Cone button. Note: the Subtractive Cone is part of an icon menu labelled Create a subtractive primitive. After launching FreeCAD, the Subtractive Box is the one displayed in the toolbar. To get to the Cone button, click on the down arrow besides the visible icon and select Subtractive Cone in the menu.
2. Set the Primitive parameters and Attachment.
3. Click OK.
4. A Cone feature appears under the active Body.

Options

The Cone can be edited after its creation in two ways:

• Double-clicking it in the Model tree, or by right-clicking and selecting Edit primitive in the contextual menu; this brings up the Primitive parameters.
• Via the Property editor.

Properties

• DatiAttachment: defines the attachment mode as well as the Attachment Offset. See Part Attachment.
• DatiLabel: label given to the Cone object. Change to suit your needs.
• DatiRadius1: the radius value at the cone's base.
• DatiRadius2: the radius value at the cone's top. A non-zero value creates a truncated cone.
• DatiHeight: the height of the cone along its axis.
• DatiAngle: angle of rotation of the cross section (360 degrees in a full cone).