PartDesign SubtractiveCone/it: Difference between revisions
Renatorivo (talk | contribs) (Created page with "==Descrizione==") |
Renatorivo (talk | contribs) (Created page with "Inserisce un cono sottrattivo nel corpo attivo. La sua forma viene sottratta dal solido esistente.") |
||
Line 3: | Line 3: | ||
==Descrizione== |
==Descrizione== |
||
Inserisce un cono sottrattivo nel corpo attivo. La sua forma viene sottratta dal solido esistente. |
|||
Inserts a subtractive cone in the active Body. Its shape is subtracted from the existing solid. |
|||
{{Version|0.17}} |
{{Version|0.17}} |
Revision as of 15:59, 11 February 2018
Cono sottrattivo |
Posizione nel menu |
---|
Part Design → Crea una primitiva sotttrattiva → Cono |
Ambiente |
PartDesign |
Avvio veloce |
Nessuno |
Introdotto nella versione |
- |
Vedere anche |
Primitive sottrattive |
Descrizione
Inserisce un cono sottrattivo nel corpo attivo. La sua forma viene sottratta dal solido esistente.
On the left: active body (A) shown in grey and subtractive cone (B) shown in transparent red; result on the right.
How to use
- Press the Subtractive Cone button. Note: the Subtractive Cone is part of an icon menu labelled Create a subtractive primitive. After launching FreeCAD, the Subtractive Box is the one displayed in the toolbar. To get to the Cone button, click on the down arrow besides the visible icon and select Subtractive Cone in the menu.
- Set the Primitive parameters and Attachment.
- Click OK.
- A Cone feature appears under the active Body.
Options
The Cone can be edited after its creation in two ways:
- Double-clicking it in the Model tree, or by right-clicking and selecting Edit primitive in the contextual menu; this brings up the Primitive parameters.
- Via the Property editor.
Properties
- DatiAttachment: defines the attachment mode as well as the Attachment Offset. See Part Attachment.
- DatiLabel: label given to the Cone object. Change to suit your needs.
- DatiRadius1: the radius value at the cone's base.
- DatiRadius2: the radius value at the cone's top. A non-zero value creates a truncated cone.
- DatiHeight: the height of the cone along its axis.
- DatiAngle: angle of rotation of the cross section (360 degrees in a full cone).