PartDesign SubtractiveBox/it: Difference between revisions

From FreeCAD Documentation
(Created page with "{{Version/it|0.17}}")
(Created page with "== Utilizzo ==")
Line 11: Line 11:
''On the left: active body (A) shown in grey and subtractive box (B) shown in transparent red; result on the right.''
''On the left: active body (A) shown in grey and subtractive box (B) shown in transparent red; result on the right.''


==How to use==
== Utilizzo ==


# Press the {{KEY|[[Image:PartDesign SubtractiveBox.png|24px]] '''Subtractive Box'''}} button. '''Note''': the Subtractive Box is part of an icon menu labelled ''Create a subtractive primitive''. After launching FreeCAD, the Subtractive Box is the one displayed in the toolbar. If a different primitive is displayed, click on the down arrow besides the icon and select Subtractive Box in the menu.
# Press the {{KEY|[[Image:PartDesign SubtractiveBox.png|24px]] '''Subtractive Box'''}} button. '''Note''': the Subtractive Box is part of an icon menu labelled ''Create a subtractive primitive''. After launching FreeCAD, the Subtractive Box is the one displayed in the toolbar. If a different primitive is displayed, click on the down arrow besides the icon and select Subtractive Box in the menu.

Revision as of 15:44, 11 February 2018

Cubo sottrattivo

Posizione nel menu
Part Design → Crea una primitiva sottrattiva → Cubo
Ambiente
PartDesign
Avvio veloce
None
Introdotto nella versione
-
Vedere anche
Primitive sottrattive

Descrizione

Inserisce un cubo sottrattivo nel corpo attivo. La sua forma viene sottratta dal solido esistente.

disponibile dalla versione 0.17

On the left: active body (A) shown in grey and subtractive box (B) shown in transparent red; result on the right.

Utilizzo

  1. Press the Subtractive Box button. Note: the Subtractive Box is part of an icon menu labelled Create a subtractive primitive. After launching FreeCAD, the Subtractive Box is the one displayed in the toolbar. If a different primitive is displayed, click on the down arrow besides the icon and select Subtractive Box in the menu.
  2. Set the Primitive parameters and Attachment.
  3. Click OK.
  4. A Box feature appears under the active Body.

Options

The Box can be edited after its creation in two ways:

  • Double-clicking it in the Model tree, or by right-clicking and selecting Edit primitive in the contextual menu; this brings up the Primitive parameters.
  • Via the Property editor.

Properties

  • DatiAttachment: defines the attachment mode as well as the Attachment Offset. See Part Attachment.
  • DatiLabel: Label given to the Box object. Change to suit your needs.
  • DatiLength: the Box's dimension in the X-direction.
  • DatiWidth: the Box's dimension in the Y-direction.
  • DatiHeight: the Box's dimension in the Z-direction.