Parça Tasarım Tezgahı - Şekil bağlayıcı oluştur

From FreeCAD Documentation
Revision as of 18:46, 2 January 2019 by Skywalker21 (talk | contribs) (Created page with "Etkin Cisim içindeki seçili bir cismi bir referans '''şekil bağlayıcı''' oluşturur. Bir şekil bağlayıcı, başka bir cismin kenarlarına veya yüzlerine bağlanan bi...")

Şekil bağlayıcı

Menü konumu
Parça tasarım → Şekil bağlayıcı oluştur
Tezgahlar
Parça tasarım
Varsayılan kısayol
Hiçbiri
Versiyonda tanıtıldı
0.17
Ayrıca bkz
klonla

Tanım

Etkin Cisim içindeki seçili bir cismi bir referans şekil bağlayıcı oluşturur. Bir şekil bağlayıcı, başka bir cismin kenarlarına veya yüzlerine bağlanan bir referans nesnesidir. Kullanım örneği, iki farklı cisimde fitting kapaklı bir kutu oluşturmak olabilir. Şekil bağlayıcı nesnesi, 3D görünümünde yarı saydam sarı renkte görüntülenir.

introduced in version 0.17 File:Shapebinder tree.png

Two shapes from Body.Pad004 are selected and their datum objects are now available in Body001.Sketch005 as external geometry through Body001.ShapeBinder.

How to use

  1. Activate target body (body to receive shape binder object).
  2. Press the Create a shape binder button.
  3. Press either the Object button or the Add geometry button.
  4. In the 3D view, select the object or geometry to copy. Object will select the whole body; Add geometry will select any element (vertex, edge, face).
  5. To remove selected geometry, press the Remove geometry button and select the geometry in the 3D view. To cancel, press the button again.
  6. Alternatively, the Body to copy can be selected before launching the Shape binder command.
  7. Press OK.

Options

Double-click the ShapeBinder label in the Model tree or right-click and select Edit shape binder in the contextual menu to edit its parameters.

Properties

  • VeriLabel: name given to the object, this name can be changed at convenience.
  • VeriTrace Support: At setting this option to true, the Shapebinder does observe relative placements of the parts and bodies. introduced in version 0.18

Limitations

  • Multiple selection is not supported. The Add geometry and Remove geometry buttons need to be pressed for each single selection.

There is a workaround for multiple selection: If you select all the elements you want to have before creating the ShapeBinder, they appear in the initial list.

  • A shape binder cannot serve as base feature.
  • Selected geometry on a body must be contiguous.
  • If the body to be copied is selected first before launching the command, or if the Object button is used, it is no longer possible to only select specific geometry elements.
  • The relative placement of the target body and the copied body is not taken into account. The shape binder will adopt the same internal coordinates as the copied body. Since version 0.18 it has a new property "Trace Support", in order to switch this behavior to take into account the relative placements.