PartDesign Preferences

From FreeCAD Documentation
Revision as of 22:35, 23 July 2019 by Uwestoehr (talk | contribs) (describe tesselation properly)

The preferences screen of the PartDesign are found in the menu Edit → Preferences → Sketcher.

General

In the General tab you can specify the following:

Name Description
Automatically check model after boolean operation If checked,
Automatically refine model after boolean operation If checked,
Automatically refine model after sketch-based operation If checked,
Add name of base object If checked,

Shape view

In the Shape view tab you can specify the following:

Name Description
Maximum deviation depending on the model bounding box Maximal linear deflection of the tesselated objects from their surface
Maximum angular deflection Maximal angular deflection from one tesselated object section to the next section

In order to display an object efficiently its surface is tesselated, i.e. it is displayed with some small deviations from it real surface. This applies not only to PartDesign models, but also to other objects in FreeCAD.
There is a lower limit for the tesselation of 0.01%. If you really want to spend the additional time you can reduce the lower limit even further by opening the menu Tools → Edit parameters... This opens the parameter editor where you navigate to BaseApp → Preferences → Mod → Part. Right click on Mesh deviation choose in the context menu Change value. Set the value to the minimum tesselation of your choice. Please keep in mind that the value is in %, i.e. for a value of 0.005% you have to enter "0.00005". The smallest value possible is 1e-7. Note: In the preferences menu you will still see 0.01% even if you set a lower value.