PartDesign PolarPattern/cs: Difference between revisions

Revision as of 14:27, 11 April 2022

Other languages:

Linear Pattern

Create MultiTransform

PartDesign

Umístění Menu
Návrh dílu Polární vzorky
Návrh dílu -> Polární vzorky
Pracovní stoly
Návrh dílu
Výchozí zástupce
Nikdo
Představen ve verzi
-
Viz také
Nikdo

Popis

Tento nástroj vezme skupinu jednoho nebo více objektů (originály) a vytvoří z nich druhou skupinu objektů pootočenou kolem dané osy.

Above: a slot-shaped pocket (B) made on top of a base solid (A, also referred to as support) is used for a polar pattern. The result (C) is shown on the right.

Použití

To create a pattern

(Optional) Select the feature (or introduced in version 0.19 several features) to be patterned.
Press the PolarPattern button.
- If you didn't initially select any features, you'll be able to select a single base feature
Define the Axis. See Options.
Define the Angle between the last copied occurrence and the original feature.
Set the number of Occurrences.
If you have several features in the pattern, their order can be important, see the image below.
Press OK.

Ordering features

Effect of the feature order

introduced in version 0.19 You can change the order by dragging the feature in the list and you will see the result immediately as preview.

Adding features

v0.18

Press Add feature to add a feature to be patterned. The feature must be visible in the 3D view:
Switch to the Model tree;
Select in the tree the feature to be added and press Space to make it visible in the 3D view;
Switch back to the Tasks panel;
Select the feature in the 3D view; it will be added to the list.
Repeat to add other features.

v0.19

Press Add feature to add a feature to be patterned.
Switch to the Model tree;
Select in the tree the feature to be added.
Repeat to add other features.

Removing features

Right-click on the feature in the list and select Remove.

or

v0.18

Press Remove feature to remove a feature from the list. The feature must be visible in the 3D view:
Switch to the Model tree;
Select in the tree the feature to be removed and press Space to make it visible in the 3D view;
Switch back to the Tasks panel;
Select the feature in the 3D view; it will have been removed from the list.
Repeat to remove other features.

v0.19

Press Remove feature to remove a feature from the list.
Switch to the Model tree;
Select in the tree the feature to be removed.
Repeat to remove other features.

Volby

Axis

Při vytvoření polárních vzorků nabízí doalogové okno 'parametry polarního vzoru' dva odlišné způsoby specifikování rotační osy.

Normal sketch axis

An axis being normal to the sketch and starting in the origin of the sketch of the feature being used is taken as axis for the polar pattern.
The pattern direction can be reversed by ticking 'Reverse direction'.

Horizontal sketch axis

Uses the horizontal axis of the sketch for axis.

Vertical sketch axis

Uses the vertical axis of the sketch for axis.

Custom Sketch Axis

If the sketch which defines the feature to be patterned also contains a construction line (or lines), then the drop down list will contain one custom sketch axis for each construction line. The first construction line will be labelled Sketch axis 0.

Base (X/Y/Z) axis

version 0.17 and above Select one of the Body Origin's standard axis (X, Y or Z) as axis.

Select reference...

Allows you to select either a DatumLine or an edge of an object or a line of a sketch to use for axis.

Angle and Occurrences

Úhel a výskyty

Určuje úhel, který má být vzorky pokryt a celkový počet vzorků (včetně originálního). Například čtyři výskyty v úhlu 180 stupňů dá 60 stupnů mezi vzorky. Je zde jedna výjimka: Je-li úhel 360, protože první a poslední výskyt je identický, čtyři výskyty budou po 90 stupních.

Omezení

Podívejte se na Lineární vzorky

Linear Pattern

Create MultiTransform

PartDesign

Structure tools: Part, Group
Helper tools: Create body, Create sketch, Edit sketch, Map sketch to face

Modeling tools
- Datum tools: Create a datum point, Create a datum line, Create a datum plane, Create a local coordinate system, Create a shape binder, Create a sub-object(s) shape binder, Create a clone
- Additive tools: Pad, Revolution, Additive loft, Additive pipe, Additive helix, Additive box, Additive cylinder, Additive sphere, Additive cone, Additive ellipsoid, Additive torus, Additive prism, Additive wedge
- Subtractive tools: Pocket, Hole, Groove, Subtractive loft, Subtractive pipe, Subtractive helix, Subtractive box, Subtractive cylinder, Subtractive sphere, Subtractive cone, Subtractive ellipsoid, Subtractive torus, Subtractive prism, ‎Subtractive wedge

Transformation tools: Mirrored, Linear Pattern, Polar Pattern, Create MultiTransform, Scaled
Dress-up tools: Fillet, Chamfer, Draft, Thickness
Boolean: Boolean operation

Extras: Migrate, Sprocket, Involute gear, Shaft design wizard
Context menu: Set tip, Move object to other body, Move object after other object, Appearance, Color per face

User documentation

Getting started
Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate

Help: Tutorials, Video tutorials
Workbenches: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Start, Surface, TechDraw, Test Framework, Web

Addons: Addon Manager, External workbenches, Scripting and macros

Hubs: User hub, Power users hub, Developer hub

@@ Line 1: / Line 1: @@
 <languages/>
+{{Docnav
+|[[PartDesign_LinearPattern|Linear Pattern]]
+|[[PartDesign_MultiTransform|Create MultiTransform]]
+|[[PartDesign_Workbench|PartDesign]]
+|IconL=PartDesign_LinearPattern.svg
+|IconR=PartDesign_MultiTransform.svg
+|IconC=Workbench_PartDesign.svg
+}}
 <div class="mw-translate-fuzzy">
+{{GuiCommand/cs
-{{GuiCommand/cs|Name=PartDesign_PolarPattern|Name/cs=Návrh dílu Polární vzorky|Workbenches=[[PartDesign Workbench/cs|Návrh dílu]], Kompletace|MenuLocation=Návrh dílu -> Polární vzorky}}
+|Name=PartDesign_PolarPattern
+|Name/cs=Návrh dílu Polární vzorky
+|Workbenches=[[PartDesign Workbench/cs|Návrh dílu]]
+|MenuLocation=Návrh dílu -> Polární vzorky
+}}
 </div>
+==Popis==
 <div class="mw-translate-fuzzy">
+Tento nástroj vezme skupinu jednoho nebo více objektů (originály) a vytvoří z nich druhou skupinu objektů pootočenou kolem dané osy.
-==Úvod==
-'Vytvočení polárního vzoru objektu' - Tento nástroj vezme skupinu jednoho nebo více objektů (originály) a vytvoří z nich druhou skupinu objektů pootočenou kolem dané osy. Například:
-[[Image:Polarpattern_example.png|600px|left]]
-{{clear}}
-==Volby==
-{|
-| [[Image:Polarpattern_parameters.png|left]]
-|
-Při vytvoření polárních vzorků nabízí doalogové okno 'parametry polarního vzoru' dva odlišné způsoby specifikování rotační osy.
-===Standardní osa===
-Radio tlačítkem  může vybrána jedna z os '''X''', '''Y''' nebo '''Z'''. Směr vzorkování může být změněn zakliknitím políčka 'Opačný směr'.
-===Výběr plochy===
-Stisknutí tlačítka označeného 'Směr' umožňuje výběr hrany existujícího tělesa pro určení směru. Připomínám, že tlačítko musí být stisknuto pokaždé při výběru nové hrany.
-===Výběr originálů===
-Seznam v okénku ukazuje 'originály', objekty které budou vzorkovány. Kliknutí na libovolný objekt jej přidá do seznamu.
-===Úhel a výskyty ===
-Určuje úhel, který má být vzorky pokryt a celkový počet vzorků (včetně originálního). Například čtyři výskyty v úhlu 180 stupňů dá 60 stupnů mezi vzorky. Je zde jedna výjimka: Je-li úhel 360, protože první a poslední výskyt je identický, čtyři výskyty budou po 90 stupních.
-|}
-{{clear}}
 </div>
-The '''polar pattern''' tool takes a selected feature and creates a set of copies rotated around a chosen axis. Starting with v0.17, it can pattern multiple features.
 [[File:PartDesign PolarPattern example.png|none]]
@@ Line 33: / Line 29: @@
 ''Above: a slot-shaped pocket (B) made on top of a base solid (A, also referred to as support) is used for a polar pattern. The result (C) is shown on the right.''
+<div class="mw-translate-fuzzy">
-==How to use==
+==Použití==
+</div>
+==== To create a pattern ====
-# Select the feature(s) to be patterned. Alternatively, the feature can be selected from a dialogue after step 2.
-#: <span style="font-size:x-small;color:blue;">v0.16 and below</span> Only a single feature can be selected, and it must be the last one at the bottom of the feature tree.
-# Press the {{KEY|[[File:PartDesign PolarPattern.png|24px]]}} '''PolarPattern''' button.
-# <span style="font-size:x-small;color:green;">v0.17 and above</span> Press {{KEY|Add feature}} to add a feature to be patterned. The feature must be visible in the 3D view:
-## Switch to the Model tree;
-## Select in the tree the feature to be added and press {{KEY|spacebar}} to make it visible in the 3D view;
-## Switch back to the Tasks panel;
-## Select the feature in the 3D view; it will be added to the list.
-## Repeat to add other features.
-# <span style="font-size:x-small;color:green;">v0.17 and above</span> Press {{KEY|Remove feature}} to remove a feature from the list, or right-click on the feature in the list and select ''Remove''.
-# Define the axis. See [[#Options|Options]].
-# Define the angle between the last copied occurrence and the original feature.
-# Set the number of occurrences.
-# Press {{KEY|OK}}.
+# (Optional) Select the feature (or {{Version|0.19}} several features) to be patterned.
-==Options==
+# Press the {{Button|[[Image:PartDesign_PolarPattern.svg|16px]] '''PolarPattern'''}} button.
+#* If you didn't initially select any features, you'll be able to select a ''single'' base feature
+# Define the '''Axis'''. See [[#Options|Options]].
+# Define the '''Angle''' between the last copied occurrence and the original feature.
+# Set the number of '''Occurrences'''.
+# If you have several features in the pattern, their order can be important, see the image below.
+# Press {{Button|OK}}.
+==== Ordering features ====
+[[File:PartDesign_feature-order.gif]]
+{{Caption|Effect of the feature order}}
+{{Version|0.19}} You can change the order by dragging the feature in the list and you will see the result immediately as preview.
+==== Adding features ====
+====== v0.18 ======
+# Press {{Button|Add feature}} to add a feature to be patterned. The feature must be visible in the [[3D_view|3D view]]:
+# Switch to the Model tree;
+# Select in the tree the feature to be added and press {{KEY|Space}} to make it visible in the [[3D_view|3D view]];
+# Switch back to the Tasks panel;
+# Select the feature in the 3D view; it will be added to the list.
+# Repeat to add other features.
+====== v0.19 ======
+# Press {{Button|Add feature}} to add a feature to be patterned.
+# Switch to the Model tree;
+# Select in the tree the feature to be added.
+# Repeat to add other features.
+==== Removing features ====
+* Right-click on the feature in the list and select ''Remove''.
+or
+====== v0.18 ======
+# Press {{Button|Remove feature}} to remove a feature from the list. The feature must be visible in the [[3D_view|3D view]]:
+# Switch to the Model tree;
+# Select in the tree the feature to be removed and press {{KEY|Space}} to make it visible in the [[3D_view|3D view]];
+# Switch back to the Tasks panel;
+# Select the feature in the 3D view; it will have been removed from the list.
+# Repeat to remove other features.
+====== v0.19 ======
+# Press {{Button|Remove feature}} to remove a feature from the list.
+# Switch to the Model tree;
+# Select in the tree the feature to be removed.
+# Repeat to remove other features.
+==Volby==
 [[File:Polarpattern parameters.png|frame|left]]
@@ Line 56: / Line 97: @@
 ===Axis===
+Při vytvoření polárních vzorků nabízí doalogové okno 'parametry polarního vzoru' dva odlišné způsoby specifikování rotační osy.
-When creating a polar pattern feature, the ''PolarPattern parameters'' dialogue offers different ways of specifying the pattern rotation axis.
 ====Normal sketch axis====
 An axis being normal to the sketch and starting in the origin of the sketch of the feature being used is taken as axis for the polar pattern.<br />
 The pattern direction can be reversed by ticking 'Reverse direction'.
@@ Line 76: / Line 118: @@
 ====Base (X/Y/Z) axis====
-<span style="font-size:x-small;color:green;">v0.17 and above</span> Select one of the Body Origin's standard axis (X, Y or Z) as axis.
+{{VersionPlus|0.17}} Select one of the Body Origin's standard axis (X, Y or Z) as axis.
 ====Select reference...====
@@ Line 83: / Line 125: @@
 ===Angle and Occurrences ===
-Specifies the angle to be covered by the pattern, and the total number of pattern shapes (including the original feature). For example, four occurrences in an angle of 180 degrees would give a spacing of 60 degrees between patterns. There is one exception: If the angle is 360 degrees, since first and last occurrence are identical, four occurrences will be spaced 90 degrees apart.
+<div class="mw-translate-fuzzy">
-{{Clear}}
+===Úhel a výskyty ===
+Určuje úhel, který má být vzorky pokryt a celkový počet vzorků (včetně originálního). Například čtyři výskyty v úhlu 180 stupňů dá 60 stupnů mezi vzorky. Je zde jedna výjimka: Je-li úhel 360, protože první a poslední výskyt je identický, čtyři výskyty budou po 90 stupních.
+</div>
 ==Omezení==
 <div class="mw-translate-fuzzy">
-* Podívejte se na [[PartDesign_LinearPattern|Lineární vzorky]]
+* Podívejte se na [[PartDesign_LinearPattern/cs|Lineární vzorky]]
 {{clear}}
 </div>
+{{Docnav
+|[[PartDesign_LinearPattern|Linear Pattern]]
+|[[PartDesign_MultiTransform|Create MultiTransform]]
+|[[PartDesign_Workbench|PartDesign]]
+|IconL=PartDesign_LinearPattern.svg
+|IconR=PartDesign_MultiTransform.svg
+|IconC=Workbench_PartDesign.svg
+}}
+{{PartDesign Tools navi{{#translation:}}}}
+{{Userdocnavi{{#translation:}}}}