Parça Tasarım Tezgahı - Referans Noktası Oluştur

From FreeCAD Documentation
Revision as of 11:27, 2 January 2019 by Skywalker21 (talk | contribs) (Created page with "{{Version/tr|0.17}}")

Referans noktası oluştur

Menü konumu
Parça tasarım→ Referans noktası oluştur
Tezgahlar
Parça tasarım
Varsayılan kısayol
Hiçbiri
Versiyonda tanıtıldı
0.17
Ayrıca bkz
Referans çizgisi oluştur, Referans düzlemi oluştur

Tanım

Eskizler veya diğer referans geometri için referans olarak kullanılabilecek bir referans noktası oluşturur.

0.17 sürümünde kullanılabilir

A datum point attached to a sphere with an attachment offset in Z = 2


How to use

  1. Press the Create a datum point button.
  2. Define Point parameters. Select a first reference in the 3D view to filter the available attachment modes.
  3. Depending on the selected reference, there may be one or more attachment modes available in the the list. The most likely one will automatically be selected and shown in bold in the list. The text Attached with mode along with the attachment mode name will appear in green at the top of the Parameters panel.
  4. To add an additional reference, press the next Reference button. Once pressed its label changes to Selecting... until a selection is made.
  5. Select an attachment mode in the list.
  6. Define Attachment Offset values.
  7. Press OK.

Options

Double-click the DatumPoint label in the Model tree or right-click and select Edit datum in the contextual menu to edit its parameters. For more details about Attachment mode and Attachment offset, see Attachment.

Properties

  • VeriMapMode: lists the attachment mode used.
  • VeriAttachment Offset: applies a transformation (translation and rotation) in reference to the attachment placement.
  • VeriLabel: name given to the object, this name can be changed at convenience.

Limitations

  • The datum point cannot be used as section for Pipe and Loft features.