PartDesign Создать опорную точку

From FreeCAD Documentation
This page is a translated version of the page PartDesign Point and the translation is 67% complete.

Создать опорную точку

Системное название
PartDesign_Point
Расположение в меню
Part Design → Create a datum → Создать опорную точку
Верстаки
PartDesign
Быстрые клавиши
Нет
Представлено в версии
0.17
См. также
Создать опорную линию, Создать опорную плоскость

Описание

Создает опорную точку, которую можно использовать для размещения эскизов или другой опорной геометрии.

A datum point attached to a sphere with an attachment offset of 2 in the Z direction.

Применение

  1. Press the Create a datum point button.
  2. Define Point parameters. Select a first reference in the 3D view to filter the available attachment modes.
  3. Depending on the selected reference, there may be one or more attachment modes available in the the list. The most likely one will automatically be selected and shown in bold in the list. The text Attached with mode along with the attachment mode name will appear in green at the top of the Parameters panel.
  4. To add an additional reference, press the next Reference button. Once pressed its label changes to Selecting... until a selection is made.
  5. Select an attachment mode in the list.
  6. Define Attachment Offset values.
  7. Press OK.

Опции

Double-click the DatumPoint label in the Model tree or right-click and select Edit datum in the contextual menu to edit its parameters. For more details about Attachment mode and Attachment offset, see Part EditAttachment.

Свойства

  • ДанныеMapMode: lists the attachment mode used.
  • ДанныеAttachment Offset: applies a transformation (translation and rotation) in reference to the attachment placement.
  • ДанныеLabel: name given to the object, this name can be changed at convenience.

Ограничения

  • The datum point cannot be used as section for Pipe and Loft features.