Part Design Tasca, Scavo

From FreeCAD Documentation
Revision as of 03:11, 1 August 2014 by Normandc (talk | contribs) (Replaced content with "===Opzioni=== left")
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

Tasca

Posizione nel menu
PartDesign -> Tasca
Ambiente
PartDesign, Completo
Avvio veloce
Nessuno
Introdotto nella versione
-
Vedere anche
Nessuno

Questo strumento usa un disegno selezionato come input, e con esso produce uno scavo o tasca. Una tasca è sostanzialmente una estrusione sottratta (uno scavo) alla geometria su cui è realizzata. Nell'esempio seguente , lo schizzo è un cerchio tracciato su una faccia del cubo e lo scavo formato a partire da questo disegno si manifesta come un foro nel cubo:

File:Pocket cropped.png

How to use

  1. Select the sketch to be pocketed. This sketch must be mapped to the face of an existing solid or Part Design feature, or an error message will appear.
  2. Press the Pocket button.
  3. Set the Pocket parameters (see next section).
  4. Click OK.

Opzioni

When creating a pocket, the 'pocket parameters' dialogue offers four different ways of specifying the length (depth) to which the pocket will be extruded:

Dimension

Enter a numeric value for the depth of the pocket. The default direction for extrusion is into the support. Extrusions occur normal to the defining sketch plane. Negative dimensions are not possible.

To first

The pocket will extrude up to the first face of the support in the extrusion direction. In other words, it will cut through all material until it reaches an empty space.

Through all

The pocket will cut through all material in the extrusion direction. With the option Symmetric to plane the pad will cut through all material in both directions.

Up to face

The pocket will extrude up to a face in the support that can be chosen by clicking on it.


Limitazioni

  • Quando è posssibile utilizzare il tipo Quota oppure Attraverso tutto perché gli altri tipi a volte danno problemi quando essi vengono utilizzati per essere replicati in schiere.
  • Inoltre, la funzione tasca ha le stesse limitazioni della funzione Pad.

Link utili

Un esempio di applicazione pratica nel forum.