PartDesign Pocket/it: Difference between revisions

From FreeCAD Documentation
(Created page with "{{GuiCommand/it|Name=PartDesign_Pocket|Name/it=Tasca|Workbenches=PartDesign, Completo|MenuLocation=PartDesign -> Tasca}}")
(Created page with "Questo strumento usa un disegno selezionato come input, e con esso produce uno <em>scavo</em> o <em>tasca</em>. Una tasca è sostanzialmente una estrusione sottratta (uno scav...")
Line 1: Line 1:
{{GuiCommand/it|Name=PartDesign_Pocket|Name/it=Tasca|Workbenches=[[PartDesign Workbench/it|PartDesign]], Completo|MenuLocation=PartDesign -> Tasca}}
{{GuiCommand/it|Name=PartDesign_Pocket|Name/it=Tasca|Workbenches=[[PartDesign Workbench/it|PartDesign]], Completo|MenuLocation=PartDesign -> Tasca}}


Questo strumento usa un disegno selezionato come input, e con esso produce uno <em>scavo</em> o <em>tasca</em>. Una tasca è sostanzialmente una estrusione sottratta (uno scavo) alla geometria su cui è realizzata. Nell'esempio seguente , lo schizzo è un cerchio tracciato su una faccia del cubo e lo scavo formato a partire da questo disegno si manifesta come un <em>foro</em> nel cubo:
==Introduction==

'Create a pocket with the selected sketch' - This tool takes a selected sketch as its input, and produces with it a <em>pocket</em>. A pocket being essentially an extrusion of a sketch that subtracts from the geometry it protrudes into. For example, if a sketch were made simply of one circle on one face of a cube, then the pocket formed by that sketch would manifest as a hole 'drilled' into the cube:
[[Image:pocket_cropped.png|left]]
[[Image:pocket_cropped.png|left]]
{{clear}}
{{clear}}

Revision as of 18:25, 13 December 2013

Tasca

Posizione nel menu
PartDesign -> Tasca
Ambiente
PartDesign, Completo
Avvio veloce
Nessuno
Introdotto nella versione
-
Vedere anche
Nessuno

Questo strumento usa un disegno selezionato come input, e con esso produce uno scavo o tasca. Una tasca è sostanzialmente una estrusione sottratta (uno scavo) alla geometria su cui è realizzata. Nell'esempio seguente , lo schizzo è un cerchio tracciato su una faccia del cubo e lo scavo formato a partire da questo disegno si manifesta come un foro nel cubo:

File:Pocket cropped.png

Options

When creating a pocket, the 'pocket parameters' dialogue offers four different ways of specifying the length (depth) to which the pocket will be extruded

Dimension

Enter a numeric value for the depth of the pocket. The default direction for extrusion is into the support. Extrusions occur normal to the defining sketch plane. Negative dimensions are not possible.

To first

The pocket will extrude up to the first face of the support in the extrusion direction. In other words, it will cut through all material until it reaches an empty space.

Through all

The pocket will cut through all material in the extrusion direction. With the option Symmetric to plane the pad will cut through all material in both directions.

Up to face

The pocket will extrude up to a face in the support that can be chosen by clicking on it.

Limitations

  • Use the type Dimension or Through All wherever possible because the other types sometimes give trouble when they are being patterned
  • Otherwise, the pocket feature has the same limitations as the pad feature.

Useful links

An example with the practice on the forum.