PartDesign Plane/tr: Difference between revisions

From FreeCAD Documentation
(Created page with "==Tanım==")
 
(Created page with "{{GuiCommand/tr |Name=Referans düzlemi oluştur |Workbenches=Parça tasarım |MenuLocation=Parça tasarım → Referans düzlemi oluştur |Version...")
Line 1: Line 1:
<languages/>
<languages/>
{{GuiCommand
{{GuiCommand/tr
|Name=PartDesign Plane
|Name=Referans düzlemi oluştur
|Workbenches=[[PartDesign Workbench|PartDesign]]
|Workbenches=[[PartDesign Workbench/tr|Parça tasarım]]
|MenuLocation=PartDesign Create a datum plane
|MenuLocation=Parça tasarım Referans düzlemi oluştur
|Version=0.17
|Version=0.17
|SeeAlso=[[PartDesign Point]], [[PartDesign Line]]
|SeeAlso=[[PartDesign Point|Referans noktası oluştur]], [[PartDesign Line|Referans çizgisi oluştur]]
}}
}}



Revision as of 11:53, 2 January 2019

Referans düzlemi oluştur

Menü konumu
Parça tasarım → Referans düzlemi oluştur
Tezgahlar
Parça tasarım
Varsayılan kısayol
Hiçbiri
Versiyonda tanıtıldı
0.17
Ayrıca bkz
Referans noktası oluştur, Referans çizgisi oluştur

Tanım

Creates a datum plane which can be used as reference for sketches or other datum geometry. Sketches can be attached to datum planes.

introduced in version 0.17

Datum Plane crossing 3 corners of the Cube with a Cylinder sketched on it using the Datum Plane as its X-Y Plane.

How to use

  1. Press the Create a datum plane button.
  2. Define Plane parameters. Select a first reference in the 3D view to filter the available attachment modes.
  3. Depending on the selected reference, there may be one or more attachment modes available in the the list. The most likely one will automatically be selected and shown in bold in the list. The text Attached with mode along with the attachment mode name will appear in green at the top of the Parameters panel.
  4. To add an additional reference, press the next Reference button. Once pressed its label changes to Selecting... until a selection is made.
  5. Select an attachment mode in the list.
  6. Define Attachment Offset values.
  7. Press OK.

Options

Double-click the DatumPlane label in the Model tree or right-click and select Edit datum in the contextual menu to edit its parameters. For more details about Attachment mode and Attachment offset, see Attachment.

Properties

  • VeriMapMode: lists the attachment mode used.
  • VeriAttachment Offset: applies a transformation (translation and rotation) in reference to the attachment placement.
  • VeriLabel: name given to the object, this name can be changed at convenience.