PartDesign Pad/pl

Create a clone

Revolution

PartDesign

PartDesign Pad
Menu location
Part Design → Pad
Workbenches
PartDesign
Default shortcut
None
Introduced in version
-
See also
None

Opis

Narzędzie Pad wyciąga szkic z bryły w kierunku odpowiadającym pozycji szkicu. Od wersji 0.17 można również użyć ścian na bryle zamiast szkiców.

"Szkic (A) po lewej, bryła (B) stworzona po użyciu narzędzia Pad po prawej"

dla wersji v0.16 i starszych Jeśli wybrany szkic zostanie odwzorowany na powierzchnię istniejącej bryły lub innej funkcji Part Design, Pad będzie z nią połączona.

Jak używać

1. Wybierz szkic na podstawie którego chcesz wyciągnąć jakiś kształt. Od wersji v0.17 możesz też wybrać jedną ze ścianek bryły.
2. Naciśnij przycisk Pad.
3. Wybierz parametry dla operacji Pad (opisane w następnym akapicie)
4. Naciśnij OK.

Opcje

Kiedy używamy funkcji Pad, w combo view automatycznie pokazują się parametry dla funkcji Pad.

Type

Opcja Type pozwala na wybranie pięciu różnych sposobów określania długości, na jaką Pad będzie wyciągany.

Dimension

Podaj długość Pad-u. Domyślnie, kształt wyciągany jest "poza" bryłę, ale może to zostać zmienione wybierając opcje "Reversed". Extrusions occur normal to the defining sketch plane. Za pomocą opcji Symmetric to plane the pad will extend half of the given length to either side of the sketch plane

Length

Defines the length of the pad. Multiple units can be used independently of the user's units preferences (m, cm, mm, nm, ft or ', in or ").

Symmetric to plane

Tick the checkbox to extend half of the given length to either side of the sketch plane.

Reversed

Reverses the direction of the pad.

Properties

• DANERefine: v0.17 and above true or false. Cleans up residual edges left after the operation. This property is initially set according to the user's settings (found in Preferences → Part design → General → Model settings). It can be manually changed afterwards. This property will be saved with the FreeCAD document.

Limitations

• Like all Part Design features, Pad creates a solid, thus the sketch must include a closed profile or it will fail with a Failed to validate broken face error. There can be multiple enclosed profiles inside a larger one, provided none intersect each other (for example, a rectangle with two circles inside it).
• The algorithm used for To First and To Last is:
  • Create a line through the centre of gravity of the sketch
  • Find all faces of the support cut by this line
  • Choose the face where the intersection point is nearest/furthest from the sketch

This means that the face that is found might not always be what you expected. If you run into this problem, use the Up to face type instead, and pick the face you want.

For the very special case of extrusion to a concave surface, where the sketch is larger than this surface, extrusion will fail. This is a unresolved bug.

• v0.16 and below There is no automatic cleanup, e.g. of adjacent planar surfaces into a single surface. You can fix this manually in the Part workbench with Refine shape (which creates an unlinked, non-parametric solid) or with the Refine shape feature from the OpenSCAD Workbench which creates a parametric feature.

Create a clone

Revolution

PartDesign

PartDesign

• Structure tools: Part, Group
• Helper tools: Create body, Create sketch, Edit sketch, Map sketch to face

---

• Modeling tools
  • Datum tools: Create a datum point, Create a datum line, Create a datum plane, Create a local coordinate system, Create a shape binder, Create a sub-object(s) shape binder, Create a clone
  • Additive tools: Pad, Revolution, Additive loft, Additive pipe, Additive helix, Additive box, Additive cylinder, Additive sphere, Additive cone, Additive ellipsoid, Additive torus, Additive prism, Additive wedge
  • Subtractive tools: Pocket, Hole, Groove, Subtractive loft, Subtractive pipe, Subtractive helix, Subtractive box, Subtractive cylinder, Subtractive sphere, Subtractive cone, Subtractive ellipsoid, Subtractive torus, Subtractive prism, ‎Subtractive wedge

---

• Transformation tools: Mirrored, Linear Pattern, Polar Pattern, Create MultiTransform, Scaled
• Dress-up tools: Fillet, Chamfer, Draft, Thickness
• Boolean: Boolean operation

---

• Extras: Migrate, Sprocket, Involute gear, Shaft design wizard
• Context menu: Set tip, Move object to other body, Move object after other object, Appearance, Color per face

User documentation

• Getting started
• Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
• Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate

---

• Help: Tutorials, Video tutorials
• Workbenches: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Start, Surface, TechDraw, Test Framework, Web

---

• Addons: Addon Manager, External workbenches, Scripting and macros

---

• Hubs: User hub, Power users hub, Developer hub