PartDesign MultiTransform/de: Difference between revisions

From FreeCAD Documentation
(Created page with "Es ist möglich ein MultiTransform-Objekt von vorhandenen Transformationen wie Spiegeln, Lineares Muster und Par...")
(Created page with "Siehe PartDesign PolaresMuster.")
Line 106: Line 106:
==Einschränkungen==
==Einschränkungen==


See [[PartDesign_PolarPattern#Limitations|PartDesign PolarPattern]].
Siehe [[PartDesign_PolarPattern/de#Einschränkungen|PartDesign PolaresMuster]].





Revision as of 07:22, 17 June 2022

PartDesign MultiTransform

Menüeintrag
Part Design → Muster anwenden → Mehrfach-Transformation erstellen
Arbeitsbereich
PartDesign
Standardtastenkürzel
Keiner
Eingeführt in Version
-
Siehe auch
PartDesign Spiegeln, PartDesign LinearesMuster, PartDesign PolaresMuster, PartDesign Skalieren

Beschreibung

Das Werkzeug PartDesign MehrfachTransformation erstellt ein Muster aus einem oder mehreren Formelementen. Das Muster kann mehrere Transformationen enthalten, wobei jede folgende Transformation auf das Ergebnis der vorherigen Transformation angewendet wird.

Folgende Transformationen stehen zur Verfügung: Spiegeln, LinearesMuster, PolaresMuster und Skaliert. Die ersten drei stehen auch als separate Werkzeuge zur Verfügung.

Ein Lochmuster, das aus einem einzelnen Loch erstellt wurde, wobei zuerst ein lineares Muster mit 2 Vorkommen und danach ein polares Muster mit 8 Vorkommen angewendet wurde.

Anwendung

Erstellen

  1. Bei Bedarf den korrekten Körper aktivieren.
  2. Wahlweise können ein oder mehrere Elemente in der Baumansicht oder der 3D-Ansicht ausgewählt werden.
  3. Es gibt mehrere Möglichkeiten das Werkzeug aufzurufen:
  4. Falls kein Körper aktiviert ist und sich zwei oder mehr Körper im Dokument befinden, öffnet sich der Dialog Aktiver Körper erforderlich mit der Aufforderung einen zu aktivieren. Wenn nur ein einziger Körper vorhanden ist, wird dieser automatisch aktiviert.
  5. Wenn kein Formelement ausgewählt wurde, öffnet sich der Aufgabenbereich Template:MenuCommand/de: Ein oder mehrere (Ctrl-Taste gedrückt halten) aus der Liste auswählen und die Schaltfläche OK drücken.
  6. Der Aufgabenbereich Parameter der Mehrfach-Transformation wird geöffnet. Siehe Optionen für weitere Informationen.
  7. Zum Fertigstellen die Schaltfläche OK am oberen Rand drücken.

Bearbeiten

  1. Eine der folgenden Möglichkeiten startet die Bearbeitung:
    • Das MultiTransform-Objekt in der Baumansicht doppelt anklicken.
    • Das MultiTransform-Objekt in der Baumansicht mit der rechten Maustaste anklicken und MultiTransform bearbeiten aus dem Kontextmenü auswählen.
  2. Der Aufgabenbereich Parameter der Mehrfach-Transformation wird geöffnet. Siehe Optionen für weitere Informationen.
  3. Zum Fertigstellen die Schaltfläche OK am oberen Rand drücken.

Kombinieren vorhandener Transformationen

Es ist möglich ein MultiTransform-Objekt von vorhandenen Transformationen wie Spiegeln, Lineares Muster und PolaresMuster zu erstellen.

  1. Check the DatenOriginals property of the existing transformations to make sure they have been applied to the same features.
  2. Select those features in the Tree view.
  3. There are several ways to invoke the tool:
    • Press the Create MultiTransform button.
    • Select the Part Design → Apply a pattern → Create MultiTransform option from the menu.
  4. The MultiTransform parameters task panel opens.
  5. Press the OK button at the top.
  6. Edit the DatenTranformations property of the created MultiTransform object:
    1. Click in the field.
    2. Press the ... button that appears.
    3. The Link dialog opens.
    4. Hold down the Ctrl key and select the existing transformations.
    5. Press the OK button.
  7. Optionally edit the MultiTransform object, see above.

Optionen

  • To add features:
    1. Press the Add feature button.
    2. Select a feature in the Tree view or the 3D view.
    3. Repeat to add more features.
  • To remove features:
    1. Press the Remove feature button.
    2. Do one of the following:
      • Select a feature in the Tree view or the 3D view.
      • Select a feature in the list at the top and press the Del key.
      • Right-click a feature in the list at the top and select Remove from the context menu.
    3. Repeat to remove more features.
  • If there are several features in the pattern, their order can be important. See PartDesign PolarPattern.
  • To add transformations:
    1. If there are existing transformations: select the transformation after which the new transformation should be added.
    2. Right-click the Transformations list.
    3. Select one the following options from the context menu:
    4. The selected transformation is added to the list and the settings for the transformation are displayed below the list.
    5. Adjust the settings to suit.
    6. Press the OK bar at the bottom.
    7. Repeat to add more transformations.
  • To edit a transformation:
    1. Right-click the transformation in the Transformations list.
    2. Select Edit from the context menu.
    3. Adjust the settings to suit.
    4. Press the OK bar at the bottom.
  • To change the order of the transformations:
    1. Right-click a transformation in the Transformations list.
    2. Select Move up or Move down from the context menu.
  • If the Update view checkbox is checked the view will update in real time.

Einschränkungen

Siehe PartDesign PolaresMuster.