PartDesign MoveFeatureInTree/ru

From FreeCAD Documentation
Revision as of 17:57, 7 February 2021 by Baritone (talk | contribs)

PartDesign MoveFeatureInTree

Системное название
PartDesign MoveFeatureInTree
Расположение в меню
Contextual menu → Move object after other object
Верстаки
PartDesign
Быстрые клавиши
Нет
Представлено в версии
0.17
См. также
Set tip, Move object to other body

Описание

Переместить объект за другой объект, при выделении этой команды в контекстном меню, позволяет переупорядочивать объекты в Body. Поддерживаются эскизы, базовая геометрия и элементы.

Использование

  1. In the Model tree, select the object(s) to be moved then right-click to open the contextual menu.
  2. Select Move object after other object.
  3. In the Select feature dialog, select the object under which to move the object(s).
  4. Press OK.

Example

The following three pictures show the same model with a pocket defined on a sketch attached to the datum plane. The features are reordered from one picture to the other. This has the effect that the pocket makes either no hole or make holes in different pads, depending on the order of the features in the model tree.