PartDesign: Serie lineare

From FreeCAD Documentation
Revision as of 21:21, 23 April 2018 by Renatorivo (talk | contribs) (Created page with "====Seleziona riferimento...====")

Schiera lineare

Posizione nel menu
PartDesign → Schiera lineare
Ambiente
PartDesign, Completo
Avvio veloce
Nessuno
Introdotto nella versione
-
Vedere anche
Schiera polare

Descrizione

Lo strumento Schiera lineare crea copie equidistanti di una funzione in una direzione lineare. A partire da v0.17, è in grado di replicare più funzioni.

Sopra: un Pad a forma di L (B) creato su un pad di base (A, indicato anche come "supporto") è usato per produrre una schiera lineare. A destra viene mostrato il risultato (C).

Uso

  1. Select the feature(s) to be patterned. Alternatively, the feature can be selected from a dialogue after step 2.
    v0.16 and below Only a single feature can be selected, and it must be the last one at the bottom of the feature tree.
  2. Press the LinearPattern button.
  3. v0.17 and above Press Add feature to add a feature to be patterned. The feature must be visible in the 3D view:
    1. Switch to the Model tree;
    2. Select in the tree the feature to be added and press spacebar to make it visible in the 3D view;
    3. Switch back to the Tasks panel;
    4. Select the feature in the 3D view; it will be added to the list.
    5. Repeat to add other features.
  4. v0.17 and above Press Remove feature to remove a feature from the list, or right-click on the feature in the list and select Remove.
  5. Define the Direction. See Options.
  6. Define the Length (distance) between the last copied occurrence and the original feature.
  7. Set the number of occurrences.
  8. Press OK .

Opzioni

Parametri LinearPattern in v0.16 e precedenti.
Parametri LinearPattern in v0.17 e successive.

Direzione

Quando si crea una funzione di schiera lineare, il dialogo Parametri LinearPattern offre diversi modi per specificare la direzione del pattern.

Asse orizzontale dello schizzo

Usa l'asse orizzontale dello schizzo per la direzione.

Asse verticale dello schizzo

Usa l'asse verticale dello schizzo per la direzione.

Asse normale allo schizzo

v0.17 e superiori Usa l'asse normale dello schizzo per la direzione.

Seleziona riferimento...

Allows you to select an edge (such as an edge of the object) to use for direction.

Custom Sketch Axis

If the sketch which defines the feature to be patterned also contains a construction line (or lines), then the drop down list will contain one custom sketch axis for each construction line. The first construction line will be labelled Sketch axis 0.

Base (X/Y/Z) axis

v0.17 and above Select one of the Body Origin's standard axis (X, Y or Z) as direction.

Limitazioni

  • Le forme della schiera non possono sovrapporsi l'un l'altra ad eccezione del caso particolare di due sole forme (l'originale più una copia)
  • Qualsiasi forma della schiera che non si sovrapponga con il supporto dell'originale viene esclusa. Questo assicura che qualsiasi oggetto di Progettazione Parte (PartDesign) è sempre costituito da un unico solido collegato
  • Per altre limitazioni, vedere la funzione Simmetria