PartDesign LinearPattern/it: Difference between revisions

From FreeCAD Documentation
(Created page with "frame|left|Parametri LinearPattern in v0.16 e precedenti. File:Linearpattern parameters v017.png|frame|left|Parametri LinearPattern in...")
(Created page with "===Direzione===")
Line 31: Line 31:
[[File:Linearpattern parameters v017.png|frame|left|Parametri LinearPattern in v0.17 e successive.]]
[[File:Linearpattern parameters v017.png|frame|left|Parametri LinearPattern in v0.17 e successive.]]


===Direction ===
===Direzione===


When creating a linear pattern feature, the '''LinearPattern parameters''' dialogue offers different ways of specifying the pattern direction.
When creating a linear pattern feature, the '''LinearPattern parameters''' dialogue offers different ways of specifying the pattern direction.

Revision as of 21:06, 23 April 2018

Schiera lineare

Posizione nel menu
PartDesign → Schiera lineare
Ambiente
PartDesign, Completo
Avvio veloce
Nessuno
Introdotto nella versione
-
Vedere anche
Schiera polare

Descrizione

Lo strumento Schiera lineare crea copie equidistanti di una funzione in una direzione lineare. A partire da v0.17, è in grado di replicare più funzioni.

Sopra: un Pad a forma di L (B) creato su un pad di base (A, indicato anche come "supporto") è usato per produrre una schiera lineare. A destra viene mostrato il risultato (C).

Uso

  1. Select the feature(s) to be patterned. Alternatively, the feature can be selected from a dialogue after step 2.
    v0.16 and below Only a single feature can be selected, and it must be the last one at the bottom of the feature tree.
  2. Press the LinearPattern button.
  3. v0.17 and above Press Add feature to add a feature to be patterned. The feature must be visible in the 3D view:
    1. Switch to the Model tree;
    2. Select in the tree the feature to be added and press spacebar to make it visible in the 3D view;
    3. Switch back to the Tasks panel;
    4. Select the feature in the 3D view; it will be added to the list.
    5. Repeat to add other features.
  4. v0.17 and above Press Remove feature to remove a feature from the list, or right-click on the feature in the list and select Remove.
  5. Define the Direction. See Options.
  6. Define the Length (distance) between the last copied occurrence and the original feature.
  7. Set the number of occurrences.
  8. Press OK .

Opzioni

Parametri LinearPattern in v0.16 e precedenti.
Parametri LinearPattern in v0.17 e successive.

Direzione

When creating a linear pattern feature, the LinearPattern parameters dialogue offers different ways of specifying the pattern direction.

Asse orizzontale dello schizzo

Uses the horizontal axis of the sketch for direction.

Vertical sketch axis

Uses the vertical axis of the sketch for direction.

Normal sketch axis

v0.17 and above Uses the normal axis of the sketch for direction.

Select reference...

Allows you to select an edge (such as an edge of the object) to use for direction.

Custom Sketch Axis

If the sketch which defines the feature to be patterned also contains a construction line (or lines), then the drop down list will contain one custom sketch axis for each construction line. The first construction line will be labelled Sketch axis 0.

Base (X/Y/Z) axis

v0.17 and above Select one of the Body Origin's standard axis (X, Y or Z) as direction.

Limitazioni

  • Le forme della schiera non possono sovrapporsi l'un l'altra ad eccezione del caso particolare di due sole forme (l'originale più una copia)
  • Qualsiasi forma della schiera che non si sovrapponga con il supporto dell'originale viene esclusa. Questo assicura che qualsiasi oggetto di Progettazione Parte (PartDesign) è sempre costituito da un unico solido collegato
  • Per altre limitazioni, vedere la funzione Simmetria