Parça Tasarım Tezgahı - Referans Çizgisi Oluştur
|
Referans Çizgisi Oluştur |
| Menü konumu |
|---|
| Parça tasarım → Referans çizgisi oluştur |
| Tezgahlar |
| Parça Tasarım |
| Varsayılan kısayol |
| Hiçbiri |
| Versiyonda tanıtıldı |
| 0.17 |
| Ayrıca bkz |
| Referans noktası oluştur, Referans düzlemi oluştur |
Tanım
Eskizler, diğer referans geometrisi veya özellikleri için referans olarak kullanılabilecek bir referans çizgisi oluşturur . Örneğin, Döndürme ve Oluk özellikleri için devir ekseni olarak kullanılabilir.
Two Datum lines through opposite corners of the cube meet at the center of mass.
How to use
- Press the
Create a datum line button. - Define Line parameters. Select a first reference in the 3D view to filter the available attachment modes.
- Depending on the selected reference, there may be one or more attachment modes available in the the list. The most likely one will automatically be selected and shown in bold in the list. The text Attached with mode along with the attachment mode name will appear in green at the top of the Parameters panel.
- To add an additional reference, press the next Reference button. Once pressed its label changes to Selecting... until a selection is made.
- Select an attachment mode in the list.
- Define Attachment Offset values.
- Press OK.
Options
Double-click the DatumLine label in the Model tree or right-click and select Edit datum in the contextual menu to edit its parameters. For more details about Attachment mode and Attachment offset, see Attachment.
Properties
- VeriMapMode: lists the attachment mode used.
- VeriAttachment Offset: applies a transformation (translation and rotation) in reference to the attachment placement.
- VeriLabel: name given to the object, this name can be changed at convenience.