PartDesign Line/tr: Difference between revisions

From FreeCAD Documentation
(Created page with " "Küpün karşıt köşelerinden geçen iki referans çizgisi kütlenin merkezinde buluşuyor."")
(Created page with "== Nasıl kullanılır ==")
Line 17: Line 17:
"Küpün karşıt köşelerinden geçen iki referans çizgisi kütlenin merkezinde buluşuyor."
"Küpün karşıt köşelerinden geçen iki referans çizgisi kütlenin merkezinde buluşuyor."


== Nasıl kullanılır ==
==How to use==


# Press the {{KEY|[[Image:PartDesign Line.png|24px]] '''Create a datum line'''}} button.
# Press the {{KEY|[[Image:PartDesign Line.png|24px]] '''Create a datum line'''}} button.

Revision as of 11:44, 2 January 2019

Referans Çizgisi Oluştur

Menü konumu
Parça tasarım → Referans çizgisi oluştur
Tezgahlar
Parça Tasarım
Varsayılan kısayol
Hiçbiri
Versiyonda tanıtıldı
0.17
Ayrıca bkz
Referans noktası oluştur, Referans düzlemi oluştur

Tanım

Eskizler, diğer referans geometrisi veya özellikleri için referans olarak kullanılabilecek bir referans çizgisi oluşturur . Örneğin, Döndürme ve Oluk özellikleri için devir ekseni olarak kullanılabilir.

0.17 sürümünde kullanılabilir

"Küpün karşıt köşelerinden geçen iki referans çizgisi kütlenin merkezinde buluşuyor."

Nasıl kullanılır

  1. Press the Create a datum line button.
  2. Define Line parameters. Select a first reference in the 3D view to filter the available attachment modes.
  3. Depending on the selected reference, there may be one or more attachment modes available in the the list. The most likely one will automatically be selected and shown in bold in the list. The text Attached with mode along with the attachment mode name will appear in green at the top of the Parameters panel.
  4. To add an additional reference, press the next Reference button. Once pressed its label changes to Selecting... until a selection is made.
  5. Select an attachment mode in the list.
  6. Define Attachment Offset values.
  7. Press OK.

Options

Double-click the DatumLine label in the Model tree or right-click and select Edit datum in the contextual menu to edit its parameters. For more details about Attachment mode and Attachment offset, see Attachment.

Properties

  • VeriMapMode: lists the attachment mode used.
  • VeriAttachment Offset: applies a transformation (translation and rotation) in reference to the attachment placement.
  • VeriLabel: name given to the object, this name can be changed at convenience.