PartDesign Создать опорный отрезок

From FreeCAD Documentation
This page is a translated version of the page PartDesign Line and the translation is 77% complete.

Создать опорный отрезок

Системное название
PartDesign_Line
Расположение в меню
Part Design → Create a datum → Создать опорный отрезок
Верстаки
PartDesign
Быстрые клавиши
Нет
Представлено в версии
0.17
См. также
Создать опорную точку, Создать опорную плоскость

Описание

Создает опорный отрезок, который можно использовать для размещения эскизов или другой опорной геометрии. Например, его можно использовать в качестве оси симметрии для построения фигур вращения или для выреза пазов (канавок).

Два опорных отрезка, проходящих через противоположные углы параллелепипеда, пересекаются в центре масс.

Применение

  1. Press the Create a datum line button.
  2. Define Line parameters. Select a first reference in the 3D view to filter the available attachment modes.
  3. Depending on the selected reference, there may be one or more attachment modes available in the the list. The most likely one will automatically be selected and shown in bold in the list. The text Attached with mode along with the attachment mode name will appear in green at the top of the Parameters panel.
  4. To add an additional reference, press the next Reference button. Once pressed its label changes to Selecting... until a selection is made.
  5. Select an attachment mode in the list.
  6. Define Attachment Offset values.
  7. Press OK.

Опции

Double-click the DatumLine label in the Model tree or right-click and select Edit datum in the contextual menu to edit its parameters. For more details about Attachment mode and Attachment offset, see Part EditAttachment.

Свойства

  • ДанныеMapMode: lists the attachment mode used.
  • ДанныеAttachment Offset: applies a transformation (translation and rotation) in reference to the attachment placement.
  • ДанныеLabel: name given to the object, this name can be changed at convenience.