Part Design: Scanalatura
Scanalatura |
Posizione nel menu |
---|
PartDesign → Scanalatura |
Ambiente |
PartDesign, Completo |
Avvio veloce |
Nessuno |
Introdotto nella versione |
- |
Vedere anche |
Rivoluzione |
Descrizione
Questo strumento rivoluziona uno schizzo selezionato o un oggetto 2D attorno ad un dato asse, asportando del materiale dall'oggetto di supporto.
Above: sketch (A) is revolved around axis (B); resulting groove on solid (C) is shown right.
Utilizzo
- Selezionare uno schizzo mappato su una faccia o un oggetto 2D
- Fare clic su Template:KEY/it.
Opzioni
Quando si crea una scanalatura, la finestra di dialogo Parametri Groove offre diversi parametri per specificare come deve essere ruotato il disegno. I parametri di Scanalatura hanno esattamente lo stesso significato che hanno per la funzione di rivoluzione.
AxisThis option specifies the axis about which the sketch is to be revolved.
AngleThis controls the angle through which the groove is to be formed, e.g. 360° would be a full, contiguous revolution. It is not possible to specify negative angles (use the Reversed option instead) or angles greater than 360° . Symmetric to planeIf checked, the groove will extend half of the specified angle in both directions from the sketch plane . ReversedIf checked, the direction of revolution is reversed from default clockwise to counterclockwise . |
Properties
Below are properties which can be defined after creation of the feature. Data properties Base and Axis are uneditable .
- DatiAngle: angle of rotation. See Angle .
- DatiLabel: label given to the operation, can be changed at convenience.
- DatiMidplane: true or false. See Symmetric to plane.
- DatiReversed: true or false. See Reversed.
- DatiRefine: v0.17 and above true or false. If set to true, cleans the solid from residual edges left by features. See Part RefineShape for more details.