PartDesign Cuneo additivo
Cuneo additivo |
Posizione nel menu |
---|
Part Design → Crea una primitiva additiva → Cuneo |
Ambiente |
PartDesign |
Avvio veloce |
None |
Introdotto nella versione |
- |
Vedere anche |
Primitive additive |
Descrizione
Inserisce un cuneo primitivo nel corpo attivo come prima caratteristica o lo fonde con le caratteristiche esistenti.
disponibile dalla versione 0.17
Utilizzo
- Press the Additive Wedge button. Note: the Additive Wedge is part of an icon menu labelled Create an additive primitive. After launching FreeCAD, the Additive Box is the one displayed in the toolbar. To get the Wedge, click on the down arrow besides the visible icon and select Additive Wedge in the menu.
- Set the Primitive parameters and Attachment.
- Click OK.
- A Wedge feature appears under the active Body.
Opzioni
The Wedge can be edited after its creation in two ways:
- Double-clicking it in the Model tree, or by right-clicking and selecting Edit primitive in the contextual menu; this brings up the Primitive parameters.
- Via the Property editor.
Proprietà
Using the default placement, the below inputs are:
- DatiX min/max : Base face X axis span
- DatiY min/max: Wedge height span
- DatiZ min/max : Base face Z axis span
- DatiX2 min/max : Top face X axis span
- DatiZ2 min/max : Top face Z axis span