PartDesign Cuneo additivo

From FreeCAD Documentation
Revision as of 21:39, 7 February 2018 by Renatorivo (talk | contribs) (Created page with "== Opzioni ==")

Cuneo additivo

Posizione nel menu
Part Design → Crea una primitiva additiva → Cuneo
Ambiente
PartDesign
Avvio veloce
None
Introdotto nella versione
-
Vedere anche
Primitive additive

Descrizione

Inserisce un cuneo primitivo nel corpo attivo come prima caratteristica o lo fonde con le caratteristiche esistenti.

disponibile dalla versione 0.17

Utilizzo

  1. Press the Additive Wedge button. Note: the Additive Wedge is part of an icon menu labelled Create an additive primitive. After launching FreeCAD, the Additive Box is the one displayed in the toolbar. To get the Wedge, click on the down arrow besides the visible icon and select Additive Wedge in the menu.
  2. Set the Primitive parameters and Attachment.
  3. Click OK.
  4. A Wedge feature appears under the active Body.

Opzioni

The Wedge can be edited after its creation in two ways:

  • Double-clicking it in the Model tree, or by right-clicking and selecting Edit primitive in the contextual menu; this brings up the Primitive parameters.
  • Via the Property editor.

Properties

Using the default placement, the below inputs are:

  • DatiX min/max : Base face X axis span
  • DatiY min/max: Wedge height span
  • DatiZ min/max : Base face Z axis span
  • DatiX2 min/max : Top face X axis span
  • DatiZ2 min/max : Top face Z axis span