PartDesign AdditiveWedge

From FreeCAD Documentation
Revision as of 19:32, 1 December 2020 by David69 (talk | contribs)

PartDesign AdditiveWedge

Menu location
Part Design → Create an additive primitive → Additive Wedge
Workbenches
PartDesign
Default shortcut
None
Introduced in version
0.17
See also
PartDesign CompPrimitiveAdditive

Description

Inserts a primitive wedge in the active Body as the first feature, or fuses it to the existing feature(s).

Usage

  1. Press the Additive Wedge button. Note: the Additive Wedge is part of an icon menu labelled Create an additive primitive. After launching FreeCAD, the Additive Box is the one displayed in the toolbar. To get the Wedge, click on the down arrow besides the visible icon and select Additive Wedge in the menu.
  2. Set the Primitive parameters and Attachment.
  3. Click OK.
  4. A Wedge feature appears under the active Body.

Options

The Wedge can be edited after its creation in two ways:

  • Double-clicking it in the Model tree, or by right-clicking and selecting Edit primitive in the contextual menu; this brings up the Primitive parameters.
  • Via the Property editor.

Properties

Using the default placement, the below inputs are:

  • DataX min/max : Base face X axis span
  • DataY min/max: Wedge height span
  • DataZ min/max : Base face Z axis span
  • DataX2 min/max : Top face X axis span
  • DataZ2 min/max : Top face Z axis span