PartDesign Аддитивный Куб (Параллелепипед)
PartDesign AdditiveBox |
Системное название |
---|
PartDesign AdditiveBox |
Расположение в меню |
Part Design → Create an additive primitive → Additive Box |
Верстаки |
PartDesign |
Быстрые клавиши |
Нет |
Представлено в версии |
0.17 |
См. также |
PartDesign Primitive additive |
Описание
Вставляет примитивный блок в активное тело в качестве первого элемента или объединяет его с существующим элементом (ами).
Применение
- Press the Additive Box button. Note: the Additive Box is part of an icon menu labelled Create an additive primitive. After launching FreeCAD, the Additive Box is the one displayed in the toolbar. If a different primitive is displayed, click on the down arrow besides the icon and select Additive Box in the menu.
- Set the Primitive parameters and Attachment.
- Click OK.
- A Box feature appears under the active Body.
Опции
The Box can be edited after its creation in two ways:
- Double-clicking it in the Model tree, or by right-clicking and selecting Edit primitive in the contextual menu; this brings up the Primitive parameters.
- Via the Property editor.
Properties
- ДанныеAttachment: defines the attachment mode as well as the Attachment Offset. See Part EditAttachment.
- ДанныеLabel: Label given to the Box object. Change to suit your needs.
- ДанныеLength: the Box's dimension in the X-direction.
- ДанныеWidth: the Box's dimension in the Y-direction.
- ДанныеHeight: the Box's dimension in the Z-direction.
PartDesign
- Инструменты структуры: Part, Group
- Вспомогательные инструменты: Create body, Create sketch, Edit sketch, Map sketch to face
- Инструменты моделирования
- Инструменты данных: Create a datum point, Create a datum line, Create a datum plane, Create a local coordinate system, Create a shape binder, Create a clone
- Аддитивные инструменты: Pad, Revolution, Additive loft, Additive pipe, Additive box, Additive cone, Additive cylinder, Additive ellipsoid, Additive prism, Additive sphere, Additive torus, Additive wedge
- Субстрактивные инструменты: Pocket, Hole, Groove, Subtractive loft, Subtractive pipe, Subtractive box, Subtractive cone, Subtractive cylinder, Subtractive ellipsoid, Subtractive prism, Subtractive sphere, Subtractive torus, Subtractive wedge
- Инструменты трансформации: Mirrored, Linear Pattern, Polar Pattern, Create MultiTransform
- Отделочные инструменты: Fillet, Chamfer, Draft, Thickness
- Бинарные: Boolean operation
- Дополнительно: Migrate, Shaft design wizard, Involute gear
- Инструменты контекстного меню: Set tip, Move object to other body, Move object after other object
Документация пользователя
- Начинающим
- Установка: Загрузка, Windows, Linux, Mac, Дополнительных компонентов, Docker, AppImage, Ubuntu Snap
- Базовая: О FreeCAD, Интерфейс, Навигация мыши, Методы выделения, Имя объекта, Настройки, Верстаки, Структура документа, Свойства, Помоги FreeCAD, Пожертвования
- Помощь: Учебники, Видео учебники
- Верстаки: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Start, Surface, TechDraw, Test Framework, Web