Mouse navigation/ro: Difference between revisions

From FreeCAD Documentation
(New template with editable fields which can be translated in the same page)
(New template with editable fields which can be translated in the same page)
Line 137: Line 137:


În navigația Maya-Gesture, toate mișcările de vizualizare sunt activate prin apăsarea butonului {{KEY | ALT}} și a butonului mouse-ului, astfel încât să fie necesar un mouse cu 3 butoane pentru a utiliza corect acest mod de navigare. Alternativ, este posibil să utilizați gesturi, deoarece acest mod a fost dezvoltat în modul normal de navigare prin gesturi.
În navigația Maya-Gesture, toate mișcările de vizualizare sunt activate prin apăsarea butonului {{KEY | ALT}} și a butonului mouse-ului, astfel încât să fie necesar un mouse cu 3 butoane pentru a utiliza corect acest mod de navigare. Alternativ, este posibil să utilizați gesturi, deoarece acest mod a fost dezvoltat în modul normal de navigare prin gesturi.
{{MayaGesture Navigation}}
{{MayaGesture Navigation
|Select_name=Select
|Pan_name=Pan
|Zoom_name=Zoom
|Rotate_view_name=Rotate view
|Alt={{KEY|Alt}}
|Select_text=Press the left mouse button over an object you want to select.
|Pan_text=Hold {{KEY|Alt}} and the middle mouse button, then move the pointer.
|Zoom_text=Hold {{KEY|Alt}} and the right mouse button, then move the pointer.

Alternatively, use the mouse wheel to zoom in and out.
|Rotate_view_text=Hold {{KEY|Alt}} and the left mouse button, then move the pointer.
}}


== Selectarea Obiectelor ==
== Selectarea Obiectelor ==

Revision as of 15:49, 11 December 2018

Modelul mouse-ului in FreeCAD este constituit din comenzi folosite la navigarea spațiului 3D și interacțiunea cu obiectele afișate. In versiunea actuală există trei moduri diferite de navigare. Modul implicit este numit "Navigare CAD" și este foarte simplu și practic, dar FreeCAD are două stiluri alternative modelate dupa navigarea în Inventor si Blender.

Navigarea

Modul de lucru cu obiecte este comun pentru toate paletele. Urmatoarele acțiuni cu mouse-ul pot fi folosite pentru controlul poziției si modului de vizualizare, în functie de stilul de navigare selectat.

Exista două moduri de a schimba stilul de navigare:

  • In dialogul pentru preferinte, secțiunea Afișare, tab-ul Vizualizare 3D;
  • Click-dreapta în spațiul liber în zona de vizualizare 3D, selectând Stil de navigare în meniul contextual.


Navigare CAD (implicita)

Acesta este modul de navigare implicit și permite utilizatorului un control simplu al vizualizării; nu este nevoie de folosirea tastaturii decât pentru selecție multiplă.

Selectare Translatie Zoom Rotire
pentru selectie pentru translatie pentru a mari sau micsora pentru a roti vizualizarea
Apasati butonul stanga al mouse-ului deasupra obiectului de selectat. Apasarea tastei CTRL permite selectarea mai multor obiecte. Apasati butonul din mijloc si miscati mouse-ul pentru a translata vizualizarea. Folositi rotita mouse-ului pentru a mari sau micsora. Apasati mai intai butonul din mijloc al mouse-ului, tineti-l apasat si apasati butonul stanga al mouse-ului si mutati-l in directia dorita. Functioneaza ca o bila ce se roteste in jurul centrului. Daca eliberati butoanele inainte de a inceta miscarea vizualizarea va continua sa se roteascain jurul centrului, daca aceasta caracteristica e activata. Dublu-click folosind butonul mijlociu pe oricare parte a unui obiect seteaza noul centru de rotatie si panorameaza pe acest punct.


Select Pan Zoom Rotate view
First method
Rotate view
Alternate method
Press the left mouse button over an object you want to select.

Holding down Ctrl allows the selection of multiple objects.

Hold the middle mouse button, then move the pointer. Use the mouse wheel to zoom in and out.

Clicking the middle mouse button re-centers the view on the location of the cursor.

Hold the middle mouse button, then press and hold the left mouse button, then move the pointer.

The cursor location when the middle mouse button is pressed determines the center of rotation. Rotation works like spinning a ball which rotates around its center. If the buttons are released before you stop the mouse motion, the view continues spinning, if this is enabled.

A double click with the middle mouse button sets a new center of rotation.

Hold the middle mouse button, then press and hold the right mouse button, then move the pointer.

With this method the middle mouse button may be released after the right mouse button is held pressed.

Users who use the mouse with their right hand may find this method easier than the first method.

Ctrl+ Ctrl+Shift+ Shift+
Pan mode: hold the Ctrl key, press the right mouse button once, then move the pointer. introduced in version 0.17 Zoom mode: hold the Ctrl and Shift keys, press the right mouse button once, then move the pointer. introduced in version 0.17 Rotate mode: hold the Shift key, press the right mouse button once, then move the pointer. introduced in version 0.17


Navigare Tip Inventor

In acest tip de navigare modelată după Open Inventor (a nu se confunda cu Autodesk Inventor) nu exista selectie cu mouse-ul. Pentru selectare trebuie apasată tasta CTRL.

Selectare Translatie Zoom Rotire
ctrl +pentru selectare pentru translatie pentru marire sau micsorare sau pentru marire sau micsorare pentru a roti
Tineti CTRL apasat si apasati butonul stanga al mouse-ului deasupra unui obiect ce doriti sa fie selectat. Faceti click cu butonul stanga al mouse-ului si miscati obiectul. Folositi rotita mouse-ului pentru marire si micsorare sau apasati si tinei butonul din mijloc si apasati butonul din stnga. Faceti click si trageti folosind butonul stanga al mouse-ului pentru a roti


Template:Inventor Navigation


Navigare Tip Blender

Blender Navigation a fost modelat după Blender. Anterior nu a existat o panoramare cu mouse-ul și a fost necesară utilizarea tastei SHIFT pentru a panorama vederea. Acest lucru s-a schimbat în 2016, cu o adăugare de caracteristici. Pentru a panorama vizualizarea, puteți apăsa acum butoanele mouse-ului stânga și dreapta și trageți în vizualizare.

Select Pan Zoom Rotate view
Shift+
Press the left mouse button over an object you want to select. Hold Shift and the middle mouse button, then move the pointer.

Alternatively, hold both left and right mouse buttons, and then move the pointer.

Use the mouse wheel to zoom in and out. Hold the middle mouse button, then move the pointer.

Navigarea cu Touchpad-ul

În Navigatorul cu touchpad, nici panningul, nici zoom-ul, nici rotirea vizualizării nu sunt operații numai pentru mouse (sau doar touchpad).

Select Pan Zoom Rotate view
Shift+ PageUp, PageDown Alt+
Press the left mouse button over an object you want to select. Hold Shift, then move the pointer. Use PageUp and PageDown to zoom in and out. Hold Alt, then move the pointer.
Ctrl+Shift+ Shift+
Alternatively, hold Shift and Ctrl, then move the pointer. Alternatively, hold Shift and the left button, then move the pointer.

Navigarea prin Gesturi(v0.16)

Acest stil de navigare a fost adaptat pentru utilizarea cu touchscreen și stiloul, dar este foarte ușor de utilizat cu mouse-ul.

Select Pan Zoom Rotate view Tilt view
Press the left mouse button over an object you want to select. Hold the right mouse button, then move the pointer. Use the mouse wheel to zoom in and out. Hold the left mouse button, then move the pointer.

In Sketcher and other edit modes, this behavior is disabled. Hold Alt when pressing the mouse button to enter rotation mode.

To set the camera's focus point for rotation, click a point with the middle mouse button. Alternatively, aim the cursor at a point and press H on the keyboard.

Hold both left and right mouse buttons, and then move the pointer sideways.
Tap to select. Drag with two fingers.

Alternatively, tap and hold, then drag. This simulates the pan with the right mouse button.

Drag two fingers (pinch) closer or farther apart. Drag with one finger to rotate.

Hold Alt when in the Sketcher.

Rotate the imaginary line formed by two touch points.

On v0.18 this method is disabled by default. To enable, go to Edit → Preferences → Display, and untick "Disable touchscreen tilt gesture" checkbox.


Navigare tip Maya

În navigația Maya-Gesture, toate mișcările de vizualizare sunt activate prin apăsarea butonului ALT și a butonului mouse-ului, astfel încât să fie necesar un mouse cu 3 butoane pentru a utiliza corect acest mod de navigare. Alternativ, este posibil să utilizați gesturi, deoarece acest mod a fost dezvoltat în modul normal de navigare prin gesturi.

Select Pan Zoom Rotate view
Alt+ Alt+ Alt+
Press the left mouse button over an object you want to select. Hold Alt and the middle mouse button, then move the pointer. Hold Alt and the right mouse button, then move the pointer.

Alternatively, use the mouse wheel to zoom in and out.

Hold Alt and the left mouse button, then move the pointer.

Selectarea Obiectelor

Selecția Simplă

Obiectele se selectează cu click-stânga în vizualizarea 3D sau selectare în vizualizarea arborescentă.

Preselecție

Există, de asemenea, și un mecanism de preselecție care evidențiază obiectele și prezintă informații despre ele înainte de a fi selectate, doar prin mișcarea mouse-ului deasupra lor. Dacă nu agreați acest comportament sau calculatorul este lent puteți să-l suprimați din dialogul pentru preferințe.


Manipularea Obiectelor

FreeCAD oferă manipulatori ce pot fi folosiți pentru a schimba aparența sau proprietățile obiectului.

Un exemplu simplu este planul de secționare ce poate fi activat folosind meniul Vizualizare→Plan de secționre.

Suport Hardware

FreeCAD suportă și un număr de dispozitive 3D.

Probleme la Mac OS X

Recent am primit rapoarte pe forum de la utilizatorii de Mac la care acele combinații de taste și butoane de mouse nu funcționează conform așteptărilor. Din păcate, niciunul dintre dezvoltatori nu deține un Mac, nici ceilalți contributori obișnuiți. Avem nevoie de ajutorul tău pentru a determina ce butoane și combinații de taste ale mouse-ului funcționează astfel încât să putem actualiza acest

Getting started/ro
Document structure/ro