Mesh SegmentationBestFit/it: Difference between revisions

From FreeCAD Documentation
(Created page with "{{Docnav/it |Crea segmenti di mesh |Leviga |Mesh |IconL= |IconR= |IconC=Workbench_Mesh.svg }}")
(Created page with "{{GuiCommand/it |Name=Mesh_SegmentationBestFit |Name/it=Adatta i segmenti |Empty=1 |MenuLocation=Mesh → Adatta i segmenti... |Workbenches=Mesh |SeeAlso...")
Line 10: Line 10:
}}
}}


{{GuiCommand
{{GuiCommand/it
|Name=Mesh_SegmentationBestFit
|Name=Mesh SegmentationBestFit
|Name/it=Adatta i segmenti
|Empty=1
|Empty=1
|MenuLocation=MeshesCreate mesh segments from best-fit surfaces...
|MenuLocation=MeshAdatta i segmenti...
|Workbenches=[[Mesh_Workbench|Mesh]]
|Workbenches=[[Mesh_Workbench/it|Mesh]]
|SeeAlso=[[Mesh_Segmentation|Mesh Segmentation]]
|SeeAlso=[[Mesh_Segmentation/it|Crea segmenti di mesh]]
}}
}}



Revision as of 21:14, 5 August 2020

Other languages:

Adatta i segmenti

Posizione nel menu
Mesh → Adatta i segmenti...
Ambiente
Mesh
Avvio veloce
Nessuno
Introdotto nella versione
-
Vedere anche
Crea segmenti di mesh

Description

The Mesh SegmentationBestFit command creates separate mesh segments for specified surface types of a mesh object. The command can also identify their parameters which can be useful when re-engineering a mesh object.

Usage

  1. If you plan to identify the parameters of a surface type, note that the command uses the color red to mark the faces selected for this option. To see them properly:
    • The VistaDisplay Mode of the mesh object ideally should be Flat lines, but should at least show faces. If necessary use the Std DrawStyle command to override this property.
    • The VistaShape Color of the mesh object should not be red.
  2. Select a single mesh object.
  3. Select the Meshes → Create mesh segments from best-fit surfaces... option from the menu.
  4. The Mesh segmentation task panel opens.
  5. Optionally press one of the Parameters... buttons to identify the parameters of a surface:
    • The Surface fit dialog box opens.
    • Select one or more faces belonging to the surface:
      • Press the Region button and while holding down the left mouse button draw a region, a closed spline, in the 3D view. Faces that (partially) fall inside the region will be selected.
      • Press the Triangle button to select individual faces.
      • Optionally press the Clear button to clear the selection.
    • Press the Compute button to calculate the parameters.
    • Press the OK or Cancel button to close the dialog box.
  6. Select the surface type(s) you wish to create mesh segments for:
    • Plane
    • Cylinder
    • Sphere
  7. Specify the Tolerance values.
  8. Specify the Minimum number of faces values.
  9. Press the OK button.
  10. The command will create a group containing separate mesh objects, each a segment of the original mesh object.
  11. If the created group is empty try using the command again with modified settings.