Siatka: Usuń elementy
Mesh_RemoveComponents |
Menu location |
---|
Meshes → Remove components... |
Workbenches |
Mesh |
Default shortcut |
None |
Introduced in version |
- |
See also |
Mesh RemoveCompByHand, Arch SplitMesh |
Description
The Mesh RemoveComponents command removes faces from mesh objects.
The Remove components task panel
Usage
- The command uses the color red to mark selected faces. To see them properly:
- The WIDOKDisplay Mode of the mesh objects ideally should be
Flat lines
, but should at least show faces. If necessary use the Std DrawStyle command to override this property. - The WIDOKShape Color of the mesh objects should not be red.
- The WIDOKDisplay Mode of the mesh objects ideally should be
- There are several ways to invoke the command:
- Press the Mesh RemoveComponents button.
- Select the Meshes → Remove components... option from the menu.
- The Remove components task panel opens.
- Use one or more of the Select options to select faces:
- Press the Region button and while holding down the left mouse button draw a region, a closed spline, in the 3D view. Faces that match the Region options and (partially) fall inside the region will be selected.
- Press the All button to select all faces.
- Press the Components button to select all components with fewer than the specified maximum number of faces. Here a component refers to a complete group of connected faces. Usually a mesh object contains a single component. But, for example after using the Mesh Merge command, a mesh object can contain multiple components.
- Press the Pick triangle button to select a single face in the 3D view. If the Select whole component option is checked, selecting a face will result in selecting the entire component the face belongs to.
- Optionally use one or more of the Deselect options to deselect faces. These options are identical to the Select options, except that the number of faces for the Components button is a minimum number.
- Optionally press the Invert button to invert the selection.
- Press the Delete button to delete the selected faces.
- Press the Close button to close the task panel and finish the command.
Środowisko pracy Siatka
- Różności: Import siatki, Eksport siatki, Siatka z kształtu, Utwórz bryłę regularną, Rozwiń siatkę, Rozwiń powierzchnię
- Modyfikacja: Ujednolicenie wektorów normalnych, Odwróć wektory normalne, Wypełnij otworów, Wypełnij interaktywnie otwory, Dodaj element, Usuń elementy, Usuń interaktywnie elementy, Wygładzanie, Uprość przez Gmsh, Uprość, Skala
- Logiczne: Połączenie, Przecięcie, Różnica
- Krojenie: Przetnij, Przytnij, Przytnij siatkę płaszczyzną, Przekrój płaszczyzną, Wiele przekrojów
- Części składowe i segmenty: Scal, Rozbij na komponenty, Utwórz segment siatki, Tworzenie segmentów siatki z najlepiej dopasowanych powierzchni
Centrum użytkownika
- Jak zacząć
- Instalacja: Pobieranie programu, Windows, Linux, Mac, Dodatkowych komponentów, Docker, AppImage, Ubuntu Snap
- Podstawy: Informacje na temat FreeCAD, Interfejs użytkownika, Profil nawigacji myszką, Metody wyboru, Nazwa obiektu, Edytor ustawień, Środowiska pracy, Struktura dokumentu, Właściwości, Pomóż w rozwoju FreeCAD, Dotacje
- Pomoc: Poradniki, Wideo poradniki
- Środowiska pracy: Strona Startowa, Architektura, Assembly, CAM, Rysunek Roboczy, MES, Inspekcja, Siatka, OpenSCAD, Część, Projekt Części, Punkty, Inżynieria Wsteczna, Robot, Szkicownik, Arkusz Kalkulacyjny, Start, Powierzchnia 3D, Rysunek Techniczny, Test Framework, Web