Mesh Ajouter un triangle
Mesh AddFacet |
Menu location |
---|
Meshes → Add triangle |
Workbenches |
Mesh |
Default shortcut |
None |
Introduced in version |
- |
See also |
Mesh FillupHoles, Mesh FillInteractiveHole |
Description
The Mesh AddFacet command adds faces along a boundary of an open mesh object. It can be used to fill holes.
Usage
- During the command edit mode will be active. In this mode it is impossible to rotate or pan the 3D view, although zooming still works. But you can temporarily switch out of edit mode with the Std ToggleNavigation command should you need to change the view.
- Select a single open mesh object.
- Select the Meshes → Add triangle option from the menu.
- If you hover over a vertex along a boundary of the mesh a yellow marker will appear and a left-click will select it.
- Select two additional points to define a triangular face. The order of the three points, clockwise or counterclockwise, determines the direction of the normal of the face.
- A menu pops up with the following options:
- Add triangle: adds the face to the mesh.
- Flip normal: flips the normal of the face. After selecting this option a left-click will again show the menu.
- Clear: removes the selected points.
- Optionally add more faces.
- Choose Finish from the 3D view contex menu to finish the command.
Notes
- For a clear indication of the orientation of the faces of mesh objects make sure the VueLighting property of the mesh objects is set to
One side
. The color of the back side of their faces will then depend on the backlight settings: Edit → Preferences... → Display → 3D View → Backlight color - Intensity. See: Preferences Editor.
Mesh
- Divers : Importer un maillage, Exporter un maillage, Créer un maillage, Solide régulier, Développer un maillage, Développer une face
- Modifier : Harmoniser les normales, Inverser les normales, Remplir les trous, Boucher un trou, Ajouter un triangle, Supprimer des composants, Suppression manuelle de composants, Lissage, Affinage, Décimation, Échelle
- Opérations booléennes : Union, Intersection, Différence
- Couper : Couper le maillage, Découper, Ajuster par plan, Créer une section à partir d'un maillage et d'un plan, Coupes
- Composants et segments : Fusionner, Éclater par composants, Diviser le maillage, Créer des segments de maillage de surfaces ajustées
Hub utilisateurs
- Démarrer avec FreeCAD
- Installation : Téléchargements, Windows, Linux, Mac, Logiciels supplémentaires, Docker, AppImage, Ubuntu Snap
- Bases : À propos de FreeCAD, Interface, Navigation par la souris, Méthodes de sélection, Objet name, Préférences, Ateliers, Structure du document, Propriétés, Contribuer à FreeCAD, Faire un don
- Aide : Tutoriels, Tutoriels vidéo
- Ateliers : Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Start, Surface, TechDraw, Test, Web