Measurement Of Angles On Holes: Difference between revisions

From FreeCAD Documentation
m (language bar)
No edit summary
Line 3: Line 3:


== Introduction == <!--T:1-->
== Introduction == <!--T:1-->

This tutorial explains how to create center hole lines in TechDraw with oriented holes.


<!--T:2-->
<!--T:2-->
Line 15: Line 17:
There are some possibilities to create a center line for holes.
There are some possibilities to create a center line for holes.
At first the lines or points on the hole must be selected as shown below. Behind them the tool [[File:AnHi4.PNG]] or [[File:AnHi6.PNG]] from the tool bar is creating the center line.
At first the lines or points on the hole must be selected as shown below. Behind them the tool [[File:AnHi4.PNG]] or [[File:AnHi6.PNG]] from the tool bar is creating the center line.

</translate>
[[Image:AnHi3.PNG|200px|thumb|left|create center line by point - point]]
[[Image:AnHi3.PNG|200px|thumb|left|create center line by point - point]]
[[Image:AnHi5.PNG|200px|thumb|center|create center line by line - line]]
[[Image:AnHi5.PNG|200px|thumb|center|create center line by line - line]]


<translate>





</translate>
</translate>
{{TechDraw Tools navi{{#translation:}}}}
{{Tutorials navi{{#translation:}}}}
{{Userdocnavi{{#translation:}}}}

Revision as of 19:40, 8 April 2020

Introduction

This tutorial explains how to create center hole lines in TechDraw with oriented holes.

By creating angles for holes it's not possible to use vertical or horizontal center lines (false/true) from the properties of the view. Helping lines and/or helping points are necessary for creating.

Proceeding:

1.Setting center lines on holes:

There are some possibilities to create a center line for holes. At first the lines or points on the hole must be selected as shown below. Behind them the tool File:AnHi4.PNG or File:AnHi6.PNG from the tool bar is creating the center line.

File:AnHi3.PNG
create center line by point - point
File:AnHi5.PNG
create center line by line - line

Template:Tutorials navi