Manual:The FreeCAD Interface/ro: Difference between revisions

From FreeCAD Documentation
(Created page with "Cel mai important control al interfeței FreeCAD este selectorul de atelier(Workbench), pe care îl folosiți pentru a comuta de la un ataelier la altul:")
(Created page with "Atelierele de lucru adesea îi lasă confuzi pe utilizatorii noi, deoarece nu este întotdeauna ușor să știți în ce Aelier să căutați un anumit instrument. Dar ei vor...")
Line 21: Line 21:
[[Image:Freecad-interface-03.jpg|none]]
[[Image:Freecad-interface-03.jpg|none]]


Atelierele de lucru adesea îi lasă confuzi pe utilizatorii noi, deoarece nu este întotdeauna ușor să știți în ce Aelier să căutați un anumit instrument. Dar ei vor învăța rapid contextul și, după un timp scurt, se vor simți în largul lor - realizând că este o modalitate convenabilă de a organiza multitudinea de instrumente pe care FreeCAD le poate oferi. Atelierele de lucru sunt, de asemenea, complet personalizabile (a se vedea mai jos).
The Workbenches often confuse new users, since it's not always easy to know in which Workbench to look for a specific tool. But they are quick to learn, and after a short while it will feel natural -- realizing it is a convenient way to organize the multitude of tools FreeCAD has to offer. Workbenches are also fully customizable (see below).


Later in this manual, you will also find a table showing the contents of all Workbenches.
Later in this manual, you will also find a table showing the contents of all Workbenches.

Revision as of 09:20, 24 August 2018

FreeCAD utilizează Qt framework pentru a desena și administra interfața sa. Acest cadru este folosit într-o gamă largă de aplicații, astfel încât interfața FreeCAD este foarte clasică și nu prezintă dificultăți speciale în înțelegere Cele mai multe butoane sunt standard și vor fi găsite acolo unde vă așteptați(File -> Open, Edit -> Paste, etc). Iată aspectul FreeCAD atunci când îl deschideți pentru prima dată, imediat după instalare, afișându-vă centrul de start:

Centrul de start este un "ecran de întâmpinare" convenabil, care arată informații utile pentru noii veniți, cum ar fi cele mai recente fișiere pe care le-ați lucrat, ce este nou în lumea FreeCAD sau informații rapide despre cele mai comune ateliere de lucru. De asemenea, vă va notifica dacă este disponibilă o nouă versiune stabilă a FreeCAD.

Dar după un timp sau după ce ați făcut unele modificări în preferințe, veți fi mai probabil probabil să vă aflați direct în unul dintre celelalte ateliere de lucru, cu un nou document deschis. Sau pur și simplu, închideți fila de start și creați un nou document:

Ateliere

Rețineți că unele dintre pictograme s-au schimbat între cele două capturi de ecran de mai sus. Aici intră în joc cel mai important concept utilizat în interfața FreeCAD: atelierul de lucru.

Atelierele de lucru reprezintă grupuri de instrumente (butoane din bara de instrumente, meniuri și alte controale de interfață) care sunt grupate împreună în funcție de specialitate. Gândiți-vă la un atelier unde aveți oameni care lucrează împreună: o persoană care lucrează cu metal, altul cu lemn. Fiecare dintre ei are, în atelierul lor, o masă separată cu instrumente specifice pentru slujba sa. Cu toate acestea, toate pot lucra pe aceleași obiecte. Același lucru se întâmplă în FreeCAD.

Cel mai important control al interfeței FreeCAD este selectorul de atelier(Workbench), pe care îl folosiți pentru a comuta de la un ataelier la altul:

Atelierele de lucru adesea îi lasă confuzi pe utilizatorii noi, deoarece nu este întotdeauna ușor să știți în ce Aelier să căutați un anumit instrument. Dar ei vor învăța rapid contextul și, după un timp scurt, se vor simți în largul lor - realizând că este o modalitate convenabilă de a organiza multitudinea de instrumente pe care FreeCAD le poate oferi. Atelierele de lucru sunt, de asemenea, complet personalizabile (a se vedea mai jos).

Later in this manual, you will also find a table showing the contents of all Workbenches.

The interface

Let's have a better look at the different parts of the interface:

  • The 3D view is the main component of the interface. It can be undocked out of the main window, you can have several views of the same document (or same objects), or several documents opened at the same time. You can select objects or parts of objects by clicking them, and you can pan, zoom and rotate the view with the mouse buttons. This will be explained further in the next chapter.
  • The combo view has two tabs:
    • The Model tab shows you the contents and structure of your document above and the properties (or parameters) of the selected object(s) below. These properties are separated in two categories:
      • Data (properties which concern the geometry itself)
      • View (properties that affect how the geometry looks like on screen).
    • The Tasks tab is where FreeCAD will prompt you for values specific to the tool you're currently using at the time—for example, entering a 'length' value when the Line tool is being used. It will close automatically after pressing the OK (or Cancel) button. Also, by double-clicking the related object in the combo view, most tools will allow you to reopen that task panel in order to modify the settings.
  • The report view is normally hidden, but it is a good idea to leave open as it will list any information, warnings or errors to help you decipher (or debug) what you may have done wrong.
  • The Python console is also hidden by default. This is where you can interact with the contents of the document using the Python language. Since every action you do on the FreeCAD interface actually executes a piece of Python code, having this open allows you to watch the code unfold in real time—allowing you a wonderful and easy way to learn a little Python on the way, almost without noticing it.


Any of the panels above can be turned on/off from menu View -> Panels .

Customizing the interface

The interface of FreeCAD is highly customizable. All panels and toolbars can be moved to different places or stacked one above another. They can also be closed and reopened when needed from the View menu or by right-clicking on an empty area of the interface. There are, however, many more options available, such as creating custom toolbars with tools from any of the Workbenches, or assigning and changing keyboard shortcuts.

These advanced customization options are available from the Tools -> Customize menu:

Read more