Manual:Generating 2D drawings/ro: Difference between revisions

From FreeCAD Documentation
No edit summary
No edit summary
Line 61: Line 61:
[[Image:Exercise_drawing_06.jpg]]
[[Image:Exercise_drawing_06.jpg]]


<div class="mw-translate-fuzzy">
* We will now place two indications, using the '''Welding/Groove symbols''' tool, selecting the default one (no groove symbol). Draw the two lines like on the image above.
* We will now place two indications, using the '''Welding/Groove symbols''' tool, selecting the default one (no groove symbol). Draw the two lines like on the image above.
* Now place two texts using the '''Add text''' tool, and change their '''text''' property to the contents of your liking.
* Now place two texts using the '''Add text''' tool, and change their '''text''' property to contents of your liking.
* Our drawing is now complete, all that is left to do is to fill in the information of the sheet titleblock. With most of the default FreeCAD templates, this can be done easily, by changing the '''Editable Texts''' property of the page.
* Our drawing is now complete, all that is left to do is to fill in the sheet title block. With most of the default FreeCAD templates, this can be done easily, by changing the '''Editable Texts''' property of the page.
</div>


<div class="mw-translate-fuzzy">
<div class="mw-translate-fuzzy">

Revision as of 13:42, 30 August 2018

Când modelul Dvs. nu poate fi imprimat sau împărţit pe secţiuni direct de maşină, de exemplu, când este prea mare (cum ar fi o clădire) sau părţile cer să fie asamblate manual când sunt gata, de obicei trebuie să-i explicaţi unei alte persoane cum să procedeze. În domeniile tehnice (inginerie, arhitectură etc.) se folosesc în mod curent desene, care sunt înmânate unei persoane însărcinate cu asamblarea produsului final şi ele îi arată cum să procedeze.

Exemplele tipice sunt instrucţiunile de montare ale Ikea, reprezentările arhitecturale sau desenele schematice. De obicei, aceste desene conţin nu numai reprezentarea grafică propriu-zisă, ci şi numeroase alte adăugiri, precum texte, dimensiuni, numere, simboluri etc. care-i ajută pe alţii să înţeleagă ce trebuie făcut şi cum anume.

În FreeCAD, atelierul destinat pentru crearea acestui tip de reprezentări grafice este Desenare.

Atelierul de Desenare vă permite să creați foi de desen care pot fi goale sau să utilizați un șablon predefinit template pentru a avea deja o serie de elemente pe foaie, cum ar fi chenarul și titlul. Pe aceste coli, puteți plasa vizualizările views obiectelor 3D pe care le-ați modelat anterior și să configurați modul în care aceste vizualizări ar trebui să apară pe hârtie. În fine, grație addon numit Drawing Dimensioning Workbench, puteți plasa tot felul de adnotări pe foaie, cum ar fi cotele/dimensiunile, textul și alte simboluri comune utilizate în mod obișnuit în desenele tehnice.

Odată desenate, schemele pot fi listate la imprimantă sau exportate în formatele SVG, PDF sau DXF.

Pe parcursul următorului exerciţiu, vom vedea cum se realizează un desen simplu, precum cel al modelului de scaun aflat în Biblioteca FreeCAD mergând pe calea (Furniture -> Chairs -> IkeaChair). Biblioteca FreeCAD poate fi adăugată ușor la instalarea FreeCAD (raportați-vă la capitolul acestui manual installing ), sau puteți descărca pur și simplu modelul din pagina web a bibliotecii sau prin intermediul link-ului direct furnizat în partea de jos a acestui capitol.

  • Încărcați fișierul IkeaChair din bibliotecă. Puteți alege între versiunea .FCStd, care va încărca istoricul complet de modelare, sau versiunea .step, care va crea un singur obiect, fără istorie. Deoarece nu va mai trebui să mai modelați, este mai bine să alegem versiunea .step, deoarece va fi mai ușor de manipulat.

  • Switch to the Drawing Workbench
  • Press the little arrow next to the New Drawing Page button.
  • Select the A4 Portrait / ISO7200 template. A new tab will open in your FreeCAD window, showing the new page.
  • In the tree view (or in the model tab), select the chair model.
  • Press the Insert view button.
  • A View object will be created on our page. Give the view the following properties:
    • X: 100
    • Y: 150
    • Scale: 0.1
    • Rotation: 270
  • We now have a nice top view (which is the default projection) of our chair:

  • Repetați operația de două ori, pentru a crea încă două vederi. Vom stabili valorile lor X și Y, care indică poziția vederii pe pagină și direcția acestora, pentru a crea orientări diferite de vizualizare. Dați fiecărei vizualizări noi următoarele proprietăți:
    • View001 (front view): X: 100, Y: 130, Scale: 0.1, Rotation: 90, Direction: (-1,0,0)
    • View002 (side view): X: 180, Y: 130, Scale: 0.1, Rotation: 90, Direction: (0,-1,0)
  • După aceasta, obținem următoarea pagină:


  • Putem schimba aspectul vederilor noastre dacă vrem, de exemplu, putem ridica proprietatea Width Line la 0.5.

We will now place dimensions and indications on our drawing. There are two ways to add dimensions to a model, one is placing the dimensions inside the 3D model, using the Dimension tool of the Draft Workbench, and then place a view of these dimensions on our sheet with the Draft View tool (which can be used with a single dimension or a group containing dimensions), or we can do things directly on the Drawing sheet, using the Drawing Dimensioning Workbench, which is installable from the FreeCAD addons. We will use here this latter method.

  • Click two of these points, then click a third point to place the dimension line:

  • The Linear Dimension tool, as with most of the other Drawing Dimensioning tools, will not exit after you have finished, allowing you to place more dimensions. When you are done, simply click the Close button in the Task panel.
  • Repeat the operation, until all the dimensions you wish to indicate are placed. Take a minute to browse through the different options proposed in the Linear Dimensions task panel. For example, by unticking the auto place text option, you will be able to place the text of the dimension elsewhere, like on the image below:

  • We will now place two indications, using the Welding/Groove symbols tool, selecting the default one (no groove symbol). Draw the two lines like on the image above.
  • Now place two texts using the Add text tool, and change their text property to contents of your liking.
  • Our drawing is now complete, all that is left to do is to fill in the sheet title block. With most of the default FreeCAD templates, this can be done easily, by changing the Editable Texts property of the page.

Our page can now be exported to SVG to be worked further in graphical applications like inkscape, or to DXF by selecting menu File -> Export. The Drawing Dimensioning workbench also features its own DXF export tool, which also supports the annotations added with that workbench. The DXF format is importable in almost all existing 2D CAD applications. Drawing pages can also be directly printed or exported to PDF.

Fişiere de descărcat

De citit în plus