Difference between revisions of "Macros recipes"

From FreeCAD Documentation
Jump to navigation Jump to search
(makeTransparent tool)
m (link update)
 
(115 intermediate revisions by 4 users not shown)
Line 7: Line 7:
 
|}
 
|}
 
<translate>
 
<translate>
 +
 
<!--T:95-->
 
<!--T:95-->
This page contains [[macros|macros]] that add functionality to a FreeCAD installation.
+
This page lists [[Macros|macros]] that can add functionality to a FreeCAD installation.
  
 
<!--T:158-->
 
<!--T:158-->
If you wrote a macro, and want to include it in the categories in this page, see '''[[macro documentation|macro documentation]]''' to learn about properly documenting the macro.
+
If you have written a macro and want to include it in one of the categories on this page, then go to [[Macro_documentation|Macro documentation]] to learn more about properly documenting a macro.
  
 
== Categories == <!--T:96-->
 
== Categories == <!--T:96-->
Line 19: Line 20:
 
<translate>
 
<translate>
  
===[[File:Part_CheckGeometry.svg]] 3D View operations=== <!--T:97-->
+
===[[File:Part_CheckGeometry.svg|32px]] 3D View operations=== <!--T:97-->
  
 
</translate>
 
</translate>
Line 25: Line 26:
 
<translate>
 
<translate>
  
<!--T:98-->
+
<!--T:170-->
* {{MacroLink|Icon=Macro_Rotate_View_view_90_Degrees.png|Macro Rotate View|Macro Rotate View}}: This macro rotates the current view by 90° to the left. Only works if you are in [[Image:View-top.svg|Std_ViewTop|16px|link=Std_ViewTop]] [[Std_ViewTop|XY (top)]] view.
+
* {{MacroLink|Icon=Macro_Align_Face_Object_to_View.png|Macro_Align_Face_Object_to_View|Macro Align Face Object to View}}: This macro aligns the current view to a selected face.
* {{MacroLink|Icon=Macro_Rotate_View_with_Y_pointing_upwards_.png|Macro Rotate ViewAxonometric|Macro Rotate ViewAxonometric}}: This macro rotates the current view in ViewAxonometric.
+
 
* {{MacroLink|Icon=Text_console_python.png|Macro Rotate View Free|Macro Rotate View Free}}: This macro is used in the Python console and rotates the current view in the angle and plane given.
+
<!--T:171-->
* {{MacroLink|Icon=Macro_View_Rotation.png|Macro View Rotation|Macro View Rotation}}: Provides a GUI to permit rotation of view by precise amounts in all three directions.
+
* {{MacroLink|Icon=Macro_Align_View_to_Face.png|Macro_Align_View_to_Face|Macro Align View to Face}}: This macro aligns the current view to a selected face.
* {{MacroLink|Icon=Macro_Texture_Objects.png|Macro Texture Objects|Macro Texture Objects}}: This macro allows you to temporarily put a texture image on the selected objects.
+
 
* {{MacroLink|Icon=Macro_Mouse_Cross.png|Macro Mouse Cross|Macro Mouse Cross}}: This small macro turns the arrow of the mouse in a precision cross.
+
<!--T:172-->
* {{MacroLink|Icon=Centericon.png|Macro MoveToOrigin|Macro Move to Origin}}: This macro translates the Placement of an object so that a selected location becomes its new origin.
+
* {{MacroLink|Icon=Macro_Copy3DViewToClipboard.png|Macro_Copy3DViewToClipboard|Macro Copy3DViewToClipboard}}: Copy contents of 3DView resized 640, 480 px to clipboard.
* {{MacroLink|Icon=Macro_Align_View_to_Face.png|Macro Align View to Face|Macro Align View to Face}}: This macro aligns the current view to a selected face.
+
 
* {{MacroLink|Icon=Macro_Align_Object_to_View.png|Macro Align Object to View|Macro Align Object to View}}: This macro align the selected object to the current View and set the coordinates Placement of the camera.
+
<!--T:173-->
* {{MacroLink|Icon=Macro_Align_Camera_to_Working_Plane.png|Macro Align Camera to Working Plane|Macro Align Camera to Working Plane}}: This macro aligns the camera to the current [[Draft SelectPlane|Draft Working Plane]]
+
* {{MacroLink|Icon=FCCamera_00.png|Macro_FCCamera|Macro FCCamera}}: This macro can rotate the screen in a defined angle and the defined axis and creates a plan to face the screen to create a form in the specified plan positions the selected face facing the screen, to detect the position of the camera.
* {{MacroLink|Icon=Macro_Align_Working_Plane_to_Camera.png|Macro Align Working Plane to Camera|Macro Align Working Plane to Camera}}: This macro moves the current [[Draft SelectPlane|Draft Working Plane]] to the center of the current view
+
 
* {{MacroLink|Icon=Macro Align Face Object to View.png|Macro Align Face Object to View|Macro Align Face Object to View}}: This macro align the face of the selected object to the current View (in case face hole the hole is placed to the view).
+
<!--T:174-->
* {{MacroLink|Icon=Macro_Toggle_Views_Visibility.png|Macro Toggle Panels Visibility|Macro Toggle Panels Visibility}}: This macro toggles the visibility of various supporting panels in FreeCAD, allowing the main window to be viewed with all available screen space.
+
* {{MacroLink|Icon=Macro_Mouse_Cross.png|Macro_Mouse_Cross|Macro Mouse Cross}}: This small macro turns the arrow of the mouse in a precision cross.
* {{MacroLink|Icon=FCCamera_00.png|Macro FCCamera|Macro FCCamera}}: This macro can rotate the screen in a defined angle and the defined axis and creates a plan to face the screen to create a form in the specified plan positions the selected face facing the screen, to detect the position of the camera.
+
 
* {{MacroLink|Icon=Macro SelectVisible.png|Macro_Toggle_Visibility|Macro Toggle Visibility}}: Set of three macro, macro '''1:''' hidden the objects not selected, macro '''2:''' displayed alls objects, macro '''3:''' hidden alls objects.
+
<!--T:175-->
* {{MacroLink|Icon=Macro VisibleAlls.png|Macro VisibleAlls|Macro Visible Alls objects}}: This macro check visible all object in the document (Visibility=True).
+
* {{MacroLink|Icon=Macro_Rotate_View_view_90_Degrees.png|Macro_Rotate_View|Macro Rotate View}}: This macro rotates the current view by 90° to the left. Only works if you are in [[Image:View-top.svg|Std_ViewTop|16px|link=Std_ViewTop]] [[Std_ViewTop|XY (top)]] view.
* {{MacroLink|Icon=Macro HiddenAlls.png|Macro HiddenAlls|Macro Hidden Alls objects}}: This macro check hidden all object in the document (Visibility=False).
+
 
* {{MacroLink|Icon=Macro If Selected Stay If Not Then Delete.png|Macro If Selected Stay If Not Then Delete|Macro If Selected Stay If Not Then Delete}} :All object not selected hare deletted !!.
+
<!--T:176-->
* {{MacroLink|Icon=Macro SelectVisible2.png|Macro_Toggle_Visibility2_1-2|Macro Toggle Visibility2 1-2}}: Set of two macro, macro '''1:Macro_Toggle_Visibility2_1-2''' hidden the objects not selected, macro '''2:Macro_Toggle_Visibility2_2-2''' displayed alls objects, macro with the original visibility.
+
* {{MacroLink|Icon=Text_console_python.png|Macro_Rotate_View_Free|Macro Rotate View Free}}: This macro is used in the Python console and rotates the current view in the angle and plane given.
* {{MacroLink|Icon=Macro_VisibleAlls2.png|Macro_Toggle_Visibility2_2-2|Macro Toggle Visibility2 2-2}}: Set of two macro, macro '''1:Macro_Toggle_Visibility2_1-2''' hidden the objects not selected, macro '''2:Macro_Toggle_Visibility2_2-2''' displayed alls objects, macro with the original visibility.
+
 
* {{MacroLink|Icon=SelectVisible.png|Macro SelectVisible|Macro SelectVisible}}: All visible objects in the tree will be selected.
+
<!--T:177-->
* {{MacroLink|Icon=Macro_Manage_Navigational_Styles1.png|Macro_Manage_Navigational_Style|Macro Manage Navigational Style1}}: This pair of macros allow you to alter the Navigation Style to 'CAD'.
+
* {{MacroLink|Icon=Macro_Rotate_View_with_Y_pointing_upwards_.png|Macro_Rotate_ViewAxonometric|Macro Rotate ViewAxonometric}}: This macro rotates the current view in View Axonometric.
* {{MacroLink|Icon=Macro_Manage_Navigational_Styles2.png|Macro_Manage_Navigational_Style2|Macro Manage Navigational Style2}}: This pair of macros allow you to alter the Navigation Style to 'Inventor'.
+
 
* {{MacroLink|Icon=Macro_Duplicate_Selection.png|Macro Duplicate Selection|Macro Duplicate Selection}}: This macro testing if one selection are duplicate , select the object IN THE 3D VIEW the "ForbiddenCursor" stay if the or one selection is duplicate, the macro stay resident.
+
<!--T:178-->
* {{MacroLink|Icon=Macro_Copy3DViewToClipboard.png|Macro Copy3DViewToClipboard|Macro Copy3DViewToClipboard}}: Copy contents of 3DView resized 640, 480 px  to clipboard .
+
* {{MacroLink|Icon=Macro_Screen_Wiki.png|Macro_Screen_Wiki|Macro Screen Wiki}}: This macro allows to save the 3D view in the desired format. The 3D view or the full 3D window of FreeCAD takes the desired dimensions.
* {{MacroLink|Icon=Macro Perpendicular To Wire.png|Macro Perpendicular To Wire|Macro Perpendicular To Wire}}: This macro positioned your object perpendicularly to wire selected.
+
 
* {{MacroLink|Icon=Macro Rotate To Point.png|Macro Rotate To Point|Macro Rotate To Point}}: Macro for rotate on object on itself with the axis of rotation the boundbox center, center of mass or last point clicked
+
<!--T:179-->
* {{MacroLink|Icon=Macro Select Hovering.png|Macro Select Hovering|Macro Select Hovering}}: this macro select a choice Face, Edge, Vertex hovering by the mouse.
+
* {{MacroLink|Icon=Snip.png|Macro_Snip|Macro Snip}}: Easily post screenshots to the FreeCAD forum.
* {{MacroLink|Icon=Macro ExpandTreeItem.png|Macro ExpandTreeItem|Macro ExpandTreeItem}}: this macro expand selected items in the tree view.. If not selection all item are expand/collapse
+
 
* {{MacroLink|Icon=Macro_Mouse_over_cb.png|Macro Mouse over cb|Macro Mouse over cb}}: this macro display all elements below cursor (elements covered by other elements will also be displayed)
+
<!--T:180-->
* {{MacroLink|Icon=Macro_FC_element_selector.png|Macro FC element selector|Macro FC element selector}}: this macro display all elements below cursor same "Macro Mouse over cb" with GUI (elements covered by other elements will also be displayed)
+
* {{MacroLink|Icon=Macro_View_Rotation.png|Macro_View_Rotation|Macro View Rotation}}: Provides a GUI to permit rotation of view by precise amounts in all three directions.
* {{MacroLink|Icon=Macro_Screen_Wiki.png|Macro_Screen_Wiki|Macro_Screen_Wiki}}: Special macro for the Wiki Worker. This macro allows to save the 3D view in the desired format. The 3D view or the full 3D window of FreeCAD takes the desired dimensions.  
+
 
* {{MacroLink|Icon=GuiResetToolbars.svg|Macro GuiResetToolbars|Macro GuiResetToolbars}}: This macro resets the position of the toolbars.
+
<!--T:181-->
* {{MacroLink|Icon=Zoom1_1.svg|Macro Zoom1_1|Macro Zoom 1:1}}: 1:1 Zoom so objects appear their actual size on the screen.  
+
* {{MacroLink|Icon=Zoom1_1.svg|Macro_Zoom1_1|Macro Zoom 1:1}}: 1:1 Zoom so objects appear their actual size on the screen.
* [[Image:Text-x-python.png|24px]] [https://github.com/dprojects/setTextures setTextures]: Allows to permanently store the URL of textures in a FreeCAD project and load stored textures.
+
 
 
</translate>
 
</translate>
 
</div>
 
</div>
Line 67: Line 68:
 
<translate>
 
<translate>
  
===[[File:Draft_FlipDimension.svg]] Animation=== <!--T:99-->
+
===[[File:Draft_FlipDimension.svg|32px]] Animation=== <!--T:99-->
  
 
</translate>
 
</translate>
Line 73: Line 74:
 
<translate>
 
<translate>
  
<!--T:100-->
+
<!--T:182-->
* {{MacroLink|Icon=Animator.svg|Macro Animator|Macro Animator}}: Animate your model by animating its properties with this feature python object.
+
* {{MacroLink|Icon=Macro_Animated_Constrain.png|Macro_Animated_Constrain|Macro Animated Constrain}}: Animate angle constrain in sketcher.
* {{MacroLink|Icon=Macro_crank_simul.png|Macro crank simul|Macro crank simul}}: Rotation rod and piston.
+
 
* {{MacroLink|Icon=Macro_Spring.png|Macro Spring|Macro Spring}}: Simulation of one spring.
+
<!--T:183-->
* {{MacroLink|Icon=Macro_hinge.png|Macro hinge|Macro hinge}}: Open and close hinge.
+
* {{MacroLink|Icon=Animator.svg|Macro_Animator|Macro Animator}}: Animate your model by animating its properties with this feature Python object.
* {{MacroLink|Icon=Macro_Assembly.png|Macro Assembly|Macro Assembly}}: Assembly animate.
+
 
* {{MacroLink|Icon=Macro_Animated_Constrain.png|Macro Animated Constrain|Macro Animated Constrain}}: Animate angle constrain in sketcher.
+
<!--T:184-->
* {{MacroLink|Icon=Macro_Assemblage_Imprimante_3D.png|Macro Assemblage Imprimante 3D|Macro Assemblage Imprimante 3D}}: Simulation of movements of a 3D printer.
+
* {{MacroLink|Icon=Macro_Assemblage_Imprimante_3D.png|Macro_Assemblage_Imprimante_3D|Macro Assemblage Imprimante 3D}}: Simulation of movements of a 3D printer.
* {{MacroLink|Icon=Macro_Constraint_Draft.png|Macro Constraint Draft|Constraint Draft}}: Simple example animation Draft wires by use the Expressions for associate many wires and simulate or verify the movement. Here the circle rotation create the movement for all objects connected (This macro run with FreeCAD version 0.16).
+
 
 +
<!--T:185-->
 +
* {{MacroLink|Icon=Macro_Assembly.png|Macro_Assembly|Macro Assembly}}: Assembly animate.
 +
 
 +
<!--T:186-->
 +
* {{MacroLink|Icon=Macro_Constraint_Draft.png|Macro_Constraint_Draft|Macro Constraint Draft}}: Simple example animation Draft wires by use the Expressions for associate many wires and simulate or verify the movement. Here the circle rotation create the movement for all objects connected (This macro run with FreeCAD version 0.16).
 +
 
 +
<!--T:187-->
 +
* {{MacroLink|Icon=Macro_crank_simul.png|Macro_crank_simul|Macro crank simul}}: Rotation rod and piston.
 +
 
 +
<!--T:188-->
 +
* {{MacroLink|Icon=Macro_hinge.png|Macro_hinge|Macro hinge}}: Open and close hinge.
 +
 
 +
<!--T:189-->
 +
* {{MacroLink|Icon=Macro_Spring.png|Macro_Spring|Macro Spring}}: Simulation of one spring.
  
 
</translate>
 
</translate>
 
</div>
 
</div>
 
</div>
 
</div>
 
 
<div class="toccolours mw-collapsible mw-collapsed">
 
<div class="toccolours mw-collapsible mw-collapsed">
 
<translate>
 
<translate>
  
===[[File:Applications-python.svg]] Code and Scripting=== <!--T:101-->
+
===[[File:Applications-python.svg|32px]] Code and scripting=== <!--T:101-->
  
 
</translate>
 
</translate>
Line 96: Line 110:
 
<translate>
 
<translate>
  
<!--T:102-->
+
<!--T:190-->
* {{MacroLink|Icon=Editor_Assistant_Icon.svg|Macro Editor Assistant|Macro Editor Assistant}}: extends the capabilities of FreeCAD's integrated Python editor.
+
* {{MacroLink|Icon=Macro_Build_Utility.png|Macro_Build_Utility|Macro Build Utility}}: This macro provides a utility to assemble a project from sub-project files using the Merge Project facility.
* {{MacroLink|Icon=Macro MessageBox.png|Macro MessageBox|Macro MessageBox}}: shows how to give information to the user through the GUI.
+
 
* {{MacroLink|Icon=MEPlan.png|Qt Example|Qt Example}}: example of using Qt commands, their connections, extraction and data assignment.  
+
<!--T:191-->
* {{MacroLink|Icon=Macro_Python_Assistant_Window.png|Macro Python Assistant Window|Macro Python Assistant Window}}: This macro provides a cut/copy/paste workspace for Python code, it is segmented so different sections can be selected and it is persistent between FreeCAD sessions.
+
* {{MacroLink|Icon=Macro_clone_explicit.png|Macro_clone_explicit|Macro clone explicit}}: Creates a copy of each selected object and sets its properties to an expression linking to the original object, making it an explicit and editable clone.
* {{MacroLink|Icon=Macro_Build_Utility.png|Macro Build Utility|Macro Build Utility}}: This macro provides a utility to assemble a project from sub-project files using the Merge Project facility.
+
 
* {{MacroLink|Icon=Macro_Global_Variable_Watcher.png|Macro Global Variable Watcher|Macro Global Variable Watcher}}: This macro facilitates the user selecting global variables and monitoring their values.
+
<!--T:192-->
* {{MacroLink|Icon=Macro_clone_explicit.png|Macro clone explicit|Macro clone explicit}}: creates a copy of each selected object and sets its properties to an expression linking to the original object, making it an explicit and editable clone.
+
* {{MacroLink|Icon=Editor_Assistant_Icon.svg|Macro_Editor_Assistant|Macro Editor Assistant}}: Extends the capabilities of FreeCAD's integrated Python editor.
* [[Image:Text-x-python.png|24px]] [https://github.com/dprojects/scanObjects scanObjects]: inspection tool for FreeCAD macro development and project debug.
+
 
 +
<!--T:193-->
 +
* {{MacroLink|Icon=Macro_Global_Variable_Watcher.png|Macro_Global_Variable_Watcher|Macro Global Variable Watcher}}: This macro facilitates the user selecting global variables and monitoring their values.
 +
 
 +
<!--T:194-->
 +
* {{MacroLink|Icon=Macro_MessageBox.png|Macro_MessageBox|Macro MessageBox}}: Shows how to give information to the user through the GUI.
 +
 
 +
<!--T:195-->
 +
* {{MacroLink|Icon=Macro_Print_SceneGraph.png|Macro_Print_SceneGraph|Macro Print SceneGraph}}: Prints the SceneGraph.
 +
 
 +
<!--T:196-->
 +
* {{MacroLink|Icon=Macro_Python_Assistant_Window.png|Macro_Python_Assistant_Window|Macro Python Assistant Window}}: This macro provides a cut/copy/paste workspace for Python code, it is segmented so different sections can be selected and it is persistent between FreeCAD sessions.
 +
 
 +
</translate>
 +
<!--THIS MACRO "Macro ZTest Over 128" SHOULD NOT BE TRANSLATED-->
 +
* {{MacroLink|Icon=Macro_ZTest_Over_128.png|Macro_ZTest_Over_128|Macro ZTest Over 128}}: This macro is only used by programmers Test characters ASCII over 127.
 +
<translate>
 +
 
 +
<!--T:197-->
 +
* {{MacroLink|Icon=MEPlan.png|Qt_Example|Qt Example}}: Example of using Qt commands, their connections, extraction and data assignment.
 +
 
 +
<!--T:198-->
 +
* [[Image:Text-x-python.png|24px]] [https://github.com/dprojects/scanObjects scanObjects]: Inspection tool for FreeCAD macro development and project debug.
  
 
</translate>
 
</translate>
<!--NOT MODIFY THE POSITION OF THIS MACRO THIS MACRO "Macro ZTest Over 128" DO NOT HAVE TO BE TRANSLATED-->
 
* {{MacroLink|Icon=Macro_ZTest_Over_128.png|Macro ZTest Over 128|Macro ZTest Over 128}}: This macro is only used by programmers Test characters ASCII over 127.
 
 
</div>
 
</div>
 
</div>
 
</div>
 
 
<div class="toccolours mw-collapsible mw-collapsed">
 
<div class="toccolours mw-collapsible mw-collapsed">
 
<translate>
 
<translate>
  
===[[File:Arch_MeshToShape.svg]] Conversion=== <!--T:103-->
+
===[[File:Arch_MeshToShape.svg|32px]] Conversion=== <!--T:103-->
  
 
</translate>
 
</translate>
Line 121: Line 154:
 
<translate>
 
<translate>
  
<!--T:104-->
+
<!--T:199-->
* {{MacroLink|Icon=Macro_Extract_Wires_from_Mesh.png|Macro Extract Wires from Mesh|Macro Extract Wires from Mesh}}: Extracts boundary wires from selected meshes
+
* {{MacroLink|Icon=Applications-python.svg|Macro_3DXML_import|Macro 3DXML import}}: Imports a 3DXML-ascii file into FreeCAD, limited functionality.
* {{MacroLink|Icon=Macro_MeshToPart.png|Macro MeshToPart|Macro MeshToPart}}: converts selected meshes to parts
+
 
* {{MacroLink|Icon=PartToVRML.png|Macro PartToVRML|Macro PartToVRML}}: Converts selected parts to VRML meshes for small size and faster loading (VRML models Kicad and Blender compatible)
+
<!--T:200-->
* {{MacroLink|Icon=Macro_FaceToSketch.png|Macro FaceToSketch|Macro FaceToSketch}}: Converts the selected Face to a single Sketch without constraints.
+
* {{MacroLink|Icon=Macro_Compound_Plus.png|Macro_Compound_Plus|Macro Compound Plus}}: Draft command set in a small macro for the 2D sketch example: work with the DXF files.
* {{MacroLink|Icon=FCBmpImportLogo.svg|Macro FCBmpImport|Macro FCBmpImport}}: Import Black and White BMP images into FreeCAD as sketch, wire, or solid or Grayscale BMP for lithophanes.
+
 
* {{MacroLink|Icon=Macro FCWire To Volume.png|Macro FCWire To Volume|Macro FCWire To Volume}}: This macro create boolean operation with the objects selected just select the wires give the thickness and click "Create"
+
<!--T:201-->
 +
* {{MacroLink|Icon=Macro_Creating_faces_from_a_DXF_file.png|Macro_Creating_faces_from_a_DXF_file|Macro Creating faces from a DXF file}}: This macro create face from a DXF file, the "Layer" are recognized separate and trained in groups.
 +
 
 +
<!--T:202-->
 
* {{MacroLink|Icon=Macro_DeepCopy.png|Macro_DeepCopy|Macro DeepCopy}}: Make a compound out of a part with a copy of all its shapes.
 
* {{MacroLink|Icon=Macro_DeepCopy.png|Macro_DeepCopy|Macro DeepCopy}}: Make a compound out of a part with a copy of all its shapes.
 +
 +
<!--T:203-->
 +
* {{MacroLink|Icon=Macro_DXF_to_Face_and_Sketch.png|Macro_DXF_to_Face_and_Sketch|Macro DXF to Face and Sketch}}: This macro converts selected elements of imported DXF file to face and sketch.
 +
 +
<!--T:204-->
 +
* {{MacroLink|Icon=Macro_Dxf_To_Shape.png|Macro_Dxf_To_Shape|Macro Dxf To Shape}}: Macro utility for create unique wire with many wires, the type wire created is selected to MakeWire, Bspline, BsplineCurve, BsplineCurve + Arc, Polygon, Bezier curve.
 +
 +
<!--T:205-->
 +
* {{MacroLink|Icon=Macro_Extract_Wires_from_Mesh.png|Macro_Extract_Wires_from_Mesh|Macro Extract Wires from Mesh}}: Extracts boundary wires from selected meshes.
 +
 +
<!--T:206-->
 +
* {{MacroLink|Icon=Macro_FaceToSketch.png|Macro_FaceToSketch|Macro FaceToSketch}}: Converts the selected Face to a single Sketch without constraints.
 +
 +
<!--T:207-->
 +
* {{MacroLink|Icon=FCBmpImportLogo.svg|Macro_FCBmpImport|Macro FCBmpImport}}: Import Black and White BMP images into FreeCAD as sketch, wire, or solid or Grayscale BMP for lithophanes.
 +
 +
<!--T:208-->
 +
* {{MacroLink|Icon=Macro_FCWire_To_Volume.png|Macro_FCWire_To_Volume|Macro FCWire To Volume}}: This macro create boolean operation with the objects selected just select the wires give the thickness and click "Create".
 +
 +
<!--T:209-->
 +
* {{MacroLink|Icon=Applications-python.svg|Macro_Iges_PyImporter|Macro Iges PyImporter}}: Imports an iges file with entity 128, for example an iges-file from FreeShip, into FreeCAD.
 +
 +
<!--T:210-->
 +
* {{MacroLink|Icon=Macro_MeshToPart.png|Macro_MeshToPart|Macro MeshToPart}}: Converts selected meshes to parts.
 +
 +
<!--T:211-->
 
* {{MacroLink|Icon=MultiCopy-reduced.png|Macro_MultiCopy|Macro MultiCopy}}: MultiCopy allows the duplication (copy and paste) of multiple FreeCAD objects that can be labelled sequentially and in a custom manner.
 
* {{MacroLink|Icon=MultiCopy-reduced.png|Macro_MultiCopy|Macro MultiCopy}}: MultiCopy allows the duplication (copy and paste) of multiple FreeCAD objects that can be labelled sequentially and in a custom manner.
* {{MacroLink|Icon=Applications-python.svg|Macro_3DXML_import|Macro 3DXML import}}: Imports a 3DXML-ascii file into FreeCAD, limited functionality.
+
 
* {{MacroLink|Icon=Applications-python.svg|Macro_Iges_PyImporter|Macro Iges PyImporter}}: Imports an iges file with entity 128, for example an iges-file from FreeShip, into FreeCAD.
+
<!--T:212-->
 +
* {{MacroLink|Icon=PartToVRML.png|Macro_PartToVRML|Macro PartToVRML}}: Converts selected parts to VRML meshes for small size and faster loading (VRML models Kicad and Blender compatible).
 +
 
 
</translate>
 
</translate>
 
</div>
 
</div>
 
</div>
 
</div>
 +
<div class="toccolours mw-collapsible mw-collapsed">
 +
<translate>
 +
 +
===[[File:Workbench_Draft.svg|32px]] Draft Workbench and 2D=== <!--T:107-->
 +
 +
</translate>
 +
<div class="mw-collapsible-content">
 +
<translate>
 +
 +
<!--T:213-->
 +
* {{MacroLink|Icon=Macro_Align_Camera_to_Working_Plane.png|Macro_Align_Camera_to_Working_Plane|Macro Align Camera to Working Plane}}: This macro aligns the camera to the current [[Draft_SelectPlane|Draft Working Plane]].
 +
 +
<!--T:214-->
 +
* {{MacroLink|Icon=Macro_Align_Working_Plane_to_Camera.png|Macro_Align_Working_Plane_to_Camera|Macro Align Working Plane to Camera}}: This macro moves the current [[Draft_SelectPlane|Draft Working Plane]] to the center of the current view.
 +
 +
<!--T:215-->
 +
* {{MacroLink|Icon=Macro_Draft_Circle_3_Points.png|Macro_Draft_Circle_3_Points|Macro Draft Circle 3 Points}}: Creates a circle from 3 selected points 2D orthogonal.
 +
 +
<!--T:216-->
 +
* {{MacroLink|Icon=Macro_Draft_Circle_3_Points.png|Macro_Draft_Circle_3_Points_3D|Macro Draft Circle 3 Points 3D}}: Creates a circle from 3 selected points in the space 3D.
 +
 +
<!--T:217-->
 +
* {{MacroLink|Icon=Macro_EdgesToArc.png|Macro_EdgesToArc|Macro EdgesToArc}}: Converts the selected Edges to a circular Arc if possible. Useful for restoring discretized arcs.
 +
 +
<!--T:218-->
 +
* {{MacroLink|Icon=Macro_Ellipse-Center%2B2Points.png|Macro_Ellipse-Center+2Points|Macro Ellipse-Center+2Points}}: Makes an ellipse by selecting three points (in this order): center, major radius and minor radius.
 +
 +
<!--T:219-->
 +
* {{MacroLink|Icon=Macro_FCConvertLines.png|Macro_FCConvertLines|Macro FC Convert Lines}}: This macro convert the object line, wire in line Dash, DashDot, DashDotDot, ZigZag and Hand with the dimensions given.
 +
 +
<!--T:220-->
 +
* {{MacroLink|Icon=Macro_Make_Arc_3_Points.png|Macro_Make_Arc_3_Points|Macro Make Arc 3 Points}}: Creates a arc from 3 selected points.
 +
 +
<!--T:221-->
 +
* {{MacroLink|Icon=Macro_Draft_Circle_3_Points.png|Macro_Make_Circle_3_Points|Macro Make Circle 3 Points}}: Creates a circle on 3 selected points, the points can be objects (this example brings together the two examples below, all parameters simply settle on a graphic window).
 +
 +
<!--T:222-->
 +
* {{MacroLink|Icon=Macro_Rectellipse.png|Macro_Rectellipse|Macro Rectellipse}}: Creates a parametric rectellipse.
  
 +
</translate>
 +
</div>
 +
</div>
 
<div class="toccolours mw-collapsible mw-collapsed">
 
<div class="toccolours mw-collapsible mw-collapsed">
 
<translate>
 
<translate>
  
===[[File:Drawing-orthoviews.svg]] Drawing Workbench=== <!--T:105-->
+
===[[File:Drawing-orthoviews.svg|32px]] Drawing Workbench=== <!--T:105-->
  
 
<!--T:165-->
 
<!--T:165-->
The [[Drawing Workbench|Drawing Workbench]] is considered obsolete since FreeCAD 0.17. Consider using the [[TechDraw Workbench|TechDraw Workbench]] instead.
+
The [[Drawing Workbench|Drawing Workbench]] is obsolete since FreeCAD 0.17. Consider using the [[TechDraw Workbench|TechDraw Workbench]] instead.
  
 
</translate>
 
</translate>
Line 148: Line 253:
 
<translate>
 
<translate>
  
<!--T:106-->
+
<!--T:223-->
* {{MacroLink|Icon=Macro_Automatic_drawing.png|Macro Automatic drawing|Macro Automatic drawing}}: allows the user to get the view of his object in a drawing with 4 different position (front,top,iso,right). Needs some modification to be perfectly effective
+
* {{MacroLink|Icon=Macro_Automatic_drawing.png|Macro_Automatic_drawing|Macro Automatic drawing}}: Allows the user to get the view of his object in a drawing with 4 different position (front,top,iso,right). Needs some modification to be perfectly effective.
* {{MacroLink|Icon=Macro_CartoucheFC.png|Macro CartoucheFC|Macro CartoucheFC}}: This GUI macro to fill simply all fields of the cartridge of the plan implementation worksheet FreeCAD, the format of the date and the symbol of the projection mode adapt to the EU region or US selected.
+
 
* {{MacroLink|Icon=Macro_CartoucheFC_Full.png|Macro CartoucheFC Full|Macro CartoucheFC Full}}: This GUI macro to fill simply all fields of the cartridge [[Misc_templates_Full|templates_Full]] of the plan implementation worksheet FreeCAD, the format of the date and the symbol of the projection mode adapt to the EU region or US selected.
+
<!--T:224-->
* {{MacroLink|Icon=Macro_CartoucheFC_2.png|Macro CartoucheFC 2|Macro CartoucheFC 2}}: This GUI macro to fill simply all fields of the cartridge '''model 2''' of the plan implementation worksheet FreeCAD.
+
* {{MacroLink|Icon=Macro_CartoucheFC.png|Macro_CartoucheFC|Macro CartoucheFC}}: This GUI macro to fill simply all fields of the cartridge of the plan implementation worksheet FreeCAD, the format of the date and the symbol of the projection mode adapt to the EU region or US selected.
* {{MacroLink|Icon=Macro_Normal_Vector.png|Macro Normal Vector|Macro Normal Vector}}: Get the normal vector of a preselected face for creating a drawing view normal to that face
+
 
 +
<!--T:225-->
 +
* {{MacroLink|Icon=Macro_CartoucheFC_2.png|Macro_CartoucheFC_2|Macro CartoucheFC 2}}: This GUI macro to fill simply all fields of the cartridge '''model 2''' of the plan implementation worksheet FreeCAD.
 +
 
 +
<!--T:226-->
 +
* {{MacroLink|Icon=Macro_CartoucheFC_Full.png|Macro_CartoucheFC_Full|Macro CartoucheFC Full}}: This GUI macro to fill simply all fields of the cartridge [[Misc_templates_Full|Misc templates Full]] of the plan implementation worksheet FreeCAD, the format of the date and the symbol of the projection mode adapt to the EU region or US selected.
 +
 
 +
<!--T:227-->
 +
* {{MacroLink|Icon=Macro_Normal_Vector.png|Macro_Normal_Vector|Macro Normal Vector}}: Get the normal vector of a preselected face for creating a drawing view normal to that face.
  
 
</translate>
 
</translate>
 
</div>
 
</div>
 
</div>
 
</div>
 
 
<div class="toccolours mw-collapsible mw-collapsed">
 
<div class="toccolours mw-collapsible mw-collapsed">
 
<translate>
 
<translate>
  
===[[File:Draft_BSpline.svg]] Dxf 2D Draft=== <!--T:107-->
+
===[[File:Workbench_FEM.svg|32px]] Fem Workbench=== <!--T:109-->
  
 
</translate>
 
</translate>
Line 168: Line 280:
 
<translate>
 
<translate>
  
<!--T:108-->
+
<!--T:228-->
* {{MacroLink|Icon=Macro Rectellipse.png|Macro Rectellipse|Macro Rectellipse}}: creates a parametric rectellipse
+
* {{MacroLink|Icon=Text-x-python.png|Macro_export_transient_FEM_results|Macro export transient FEM results}}: This macro exports multiple FEM result objects from a transient analysis to the VTK format and generates a PVU file which can be used to load the results directly into ParaView for post-processing.
* {{MacroLink|Icon=Macro_Draft_Circle_3_Points.png|Macro Make Circle 3 Points|Macro Make Circle 3 Points}}: creates a circle on 3 selected points, the points can be objects (this example brings together the two examples below, all parameters simply settle on a graphic window).
+
 
* {{MacroLink|Icon=Macro_Draft_Circle_3_Points.png|Macro Draft Circle 3 Points|Macro Draft Circle 3 Points}}: creates a circle from 3 selected points 2D orthogonal
+
<!--T:229-->
* {{MacroLink|Icon=Macro_Draft_Circle_3_Points.png|Macro Draft Circle 3 Points 3D|Macro Draft Circle 3 Points 3D}}: creates a circle from 3 selected points in the space 3D
+
* {{MacroLink|Icon=Macro_GMSH.png|Macro_GMSH|Macro GMSH}}: Create FEM Meshes by GMSH Mesh Generator.
* {{MacroLink|Icon=Macro Make Arc 3 Points.png|Macro Make Arc 3 Points|Macro Make Arc 3 Points}}: creates a arc from 3 selected points
 
* {{MacroLink|Icon=Macro_Ellipse-Center%2B2Points.png|Macro Ellipse-Center+2Points|Macro Ellipse-Center+2Points}} Makes an ellipse by selecting three points (in this order): centre, major radius and minor radius
 
* {{MacroLink|Icon=Macro_FCConvertLines.png|Macro FCConvertLines|Macro FC Convert Lines}}: this macro convert the object line, wire in line Dash, DashDot, DashDotDot,ZigZag and Hand with the dimensions given.
 
* {{MacroLink|Icon=Macro_EdgesToArc.png|Macro EdgesToArc|Macro EdgesToArc}}: Converts the selected Edges to a circular Arc if possible. Useful for restoring discretized arcs.
 
* {{MacroLink|Icon=Macro_Creating_faces_from_a_DXF_file.png|Macro Creating faces from a DXF file|Macro Creating faces from a DXF file}}: This macro create face from a DXF file, the "Layer" are recognized separate and trained in groups.
 
* {{MacroLink|Icon=Macro_DXF_to_Face_and_Sketch.png|Macro DXF to Face and Sketch|Macro DXF to Face and Sketch}}: This macro converts selected elements of imported dxf to face and sketch.
 
* {{MacroLink|Icon=Macro_Compound_Plus.png|Macro_Compound_Plus|Macro Compound Plus}}: Draf command set in a small macro for the 2D sketch example: work with the DXF files.
 
* {{MacroLink|Icon=Macro Dxf To Shape.png|Macro Dxf To Shape|Macro Dxf To Shape}}: Macro utility for create unique wire with many wires, the type wire created is selected to MakeWire, Bspline, BsplineCurve, BsplineCurve + Arc, Polygon, Bezier curve
 
  
 
</translate>
 
</translate>
 
</div>
 
</div>
 
</div>
 
</div>
 
 
<div class="toccolours mw-collapsible mw-collapsed">
 
<div class="toccolours mw-collapsible mw-collapsed">
 
<translate>
 
<translate>
  
===[[File:Fem_ResultDisplacement.svg]] Fem=== <!--T:109-->
+
===[[File:Std_Windows.svg|32px]] Gui=== <!--T:230-->
  
 
</translate>
 
</translate>
Line 195: Line 298:
 
<translate>
 
<translate>
  
<!--T:110-->
+
<!--T:231-->
* {{MacroLink|Icon=Macro_GMSH.png|Macro GMSH|Macro GMSH}}: Create FEM Meshes by GMSH Mesh Generator
+
* {{MacroLink|Icon=GuiResetToolbars.svg|Macro_GuiResetToolbars|Macro GuiResetToolbars}}: This macro resets the position of the toolbars.
* {{MacroLink|Icon=Text-x-python.png|Macro_export_transient_FEM_results|Macro export transient FEM results}}: This macro exports multiple FEM result objects from a transient analysis to the VTK format and generates a PVU file which can be used to load the results directly into ParaView for post-processing.  
+
 
 +
<!--T:232-->
 +
* {{MacroLink|Icon=Macro_MacroMenu.png|Macro_MacroMenu|Macro MacroMenu}}: Add the macros found in the macros folder to the Macros menu of FreeCAD.
 +
 
 +
<!--T:233-->
 +
* {{MacroLink|Macro_SplitPropEditor|Macro SplitPropEditor}}: Temporarily split the property editor from the combo view to a separated dock widget.
 +
 
 +
<!--T:234-->
 +
* {{MacroLink|Icon=Macro_Toggle_Views_Visibility.png|Macro_Toggle_Panels_Visibility|Macro Toggle Panels Visibility}}: This macro toggles the visibility of various supporting panels in FreeCAD, allowing the main window to be viewed with all available screen space.
 +
 
 
</translate>
 
</translate>
 
</div>
 
</div>
 
</div>
 
</div>
 
 
<div class="toccolours mw-collapsible mw-collapsed">
 
<div class="toccolours mw-collapsible mw-collapsed">
 
<translate>
 
<translate>
  
===[[File:Part_Measure_Clear_All.svg]] Info and measures=== <!--T:111-->
+
===[[File:Part_Measure_Linear.svg|32px]] Info and measurements=== <!--T:111-->
  
 
</translate>
 
</translate>
Line 211: Line 322:
 
<translate>
 
<translate>
  
<!--T:112-->
+
<!--T:235-->
* {{MacroLink|Icon=Intersection_Icon.svg|Macro Intersection|Macro Intersection}}: Finds the intersection between 2 or 3 selected edges/faces, works with Datum Planes and Datum Lines also. Creates a parametric feature python object containing the shape of the intersection.
+
* {{MacroLink|Icon=BoundBoxTracing.png|Macro_BoundingBox_Tracing|Macro BoundingBox Tracing}}: This macro red trace (editable) around the BoundingBox with 6 rectangles.
* {{MacroLink|Icon=FCInfo.png|Macro FCInfo|Macro FCInfo}}: Gives a series of information about the selected shape and can display a conversion of length, inclination (degrees, radian, grade) shape, surface, volume and the weight of the form in the density selected in various international and Anglo-Saxon units
+
 
* {{MacroLink|Icon=FCInfoToolBar.png|Macro_FCInfo_ToolBar|FCInfo_ToolBar}}: Gives a series of information about the selected shape as FCInfo in a mini ToolBar
+
<!--T:236-->
* {{MacroLink|Icon=FCInfo.png|Macro FCInfo Alternate Linux|Macro FCInfo Alternate Linux}}: same as above, but for Linux (obsolete)
+
* {{MacroLink|Icon=CenterFace.png|Macro_CenterFace|Macro CenterFace}}: This macro red trace (editable) the center face (mass) with 1 point and print the coordinates.
* {{MacroLink|Icon=Macro_FCInfoGlass.png|Macro FCInfoGlass|Macro FCInfoGlass}}: Gives a series of information about the selected shape and displayed in screen 3D
+
 
* {{MacroLink|Icon=FCInfoToMouse.png|Macro FCInfoToMouse|Macro FCInfoToMouse}}: Provide informations coordinates, length and angles in real time on the mouse in a bubble annotation displayed in the 3D screen
+
<!--T:237-->
* {{MacroLink|Icon=Macro_Delta_xyz.png|Macro Delta xyz|Macro Delta xyz}}: Gives the Delta values and the distance between 2 points
+
* {{MacroLink|Icon=Macro_CenterOfMass.png|Macro_CenterOfMass|Macro CenterOfMass}}: Gives the total mass and the center of mass of multiple objects selected with the density chosen.
* {{MacroLink|Icon=Macro_ObjectInfo.png|Macro ObjectInfo|Macro ObjectInfo}}: User-friendly "Info" module created by a FreeCAD user
+
 
* {{MacroLink|Icon=Macro_Dump_Objects.png|Macro Dump Objects|Macro Dump Objects}}: This macro generates a listing of all objects in the current document - the list can be in a window or on the Report view.
+
<!--T:238-->
* {{MacroLink|Icon=Macro_MeasureCircle.png|Macro MeasureCircle|Macro MeasureCircle}}: Compute the radius of a circle by 3 points or a circular edge.
+
* {{MacroLink|Icon=Macro_cross_section.png|Macro_cross_section|Macro cross section}}: Displays an interactively slidable cross-section.
* {{MacroLink|Icon=Macro CenterOfMass.png|Macro CenterOfMass|Macro CenterOfMass}}: Gives the total mass and the center of mass of multiple objects selected with the density chosen.
+
 
* {{MacroLink|Icon=Macro_SimpleProperties.png|Macro SimpleProperties|Macro SimpleProperties}}: Display in a concise way basic physical properties of an object (volume, bound box dimensions, ...)
+
<!--T:239-->
 +
* {{MacroLink|Icon=Macro_Delta_xyz.png|Macro_Delta_xyz|Macro Delta xyz}}: Gives the Delta values and the distance between 2 points.
 +
 
 +
<!--T:240-->
 +
* {{MacroLink|Icon=Macro_Dump_Objects.png|Macro_Dump_Objects|Macro Dump Objects}}: This macro generates a listing of all objects in the current document - the list can be in a window or on the Report view.
 +
 
 +
<!--T:241-->
 +
* {{MacroLink|Icon=Macro_FC_element_selector.png|Macro_FC_element_selector|Macro FC element selector}}: This macro display all elements below cursor same "Macro Mouse over cb" with GUI (elements covered by other elements will also be displayed).
 +
 
 +
<!--T:242-->
 +
* {{MacroLink|Icon=FCInfo.png|Macro_FCInfo|Macro FCInfo}}: Gives a series of information about the selected shape and can display a conversion of length, inclination (degrees, radian, grade) shape, surface, volume and the weight of the form in the density selected in various international and Anglo-Saxon units.
 +
 
 +
<!--T:243-->
 +
* {{MacroLink|Icon=FCInfo.png|Macro_FCInfo_Alternate_Linux|Macro FCInfo Alternate Linux}}: Same as above, but for Linux (obsolete).
 +
 
 +
<!--T:244-->
 +
* {{MacroLink|Icon=FCInfoToolBar.png|Macro_FCInfo_ToolBar|Macro FCInfo ToolBar}}: Gives a series of information about the selected shape as FCInfo in a mini ToolBar.
 +
 
 +
<!--T:245-->
 +
* {{MacroLink|Icon=Macro_FCInfoGlass.png|Macro_FCInfoGlass|Macro FCInfoGlass}}: Gives a series of information about the selected shape and displayed in screen 3D.
 +
 
 +
<!--T:246-->
 +
* {{MacroLink|Icon=FCInfoToMouse.png|Macro_FCInfoToMouse|Macro FCInfoToMouse}}: Provides informations coordinates, length and angles in real time on the mouse in a bubble annotation displayed in the 3D screen.
 +
 
 +
<!--T:247-->
 +
* {{MacroLink|Icon=Macro_FCTreeView.png|Macro_FCTreeView|Macro FCTreeView}}: Macro for list all objects in the project in one list without hierarchy, options sort by name, label, visibility, group, by length option search by name, label... without case sensitive or with case sensitive and select all objects displayed in the macro window.
 +
 
 +
<!--T:248-->
 +
* {{MacroLink|Icon=Macro_HighlightCommon.png|Macro_HighlightCommon|Macro HighlightCommon}}: Highlight common parts.
 +
 
 +
<!--T:249-->
 +
* {{MacroLink|Icon=HighlightDifference.png|Macro_HighlightDifference|Macro HighlightDifference}}: Compute the difference between two shapes.
 +
 
 +
<!--T:250-->
 +
* {{MacroLink|Icon=Macro_MeasureCircle.png|Macro_MeasureCircle|Macro MeasureCircle}}: Compute the radius of a circle by 3 points or a circular edge.
 +
 
 +
<!--T:251-->
 +
* {{MacroLink|Icon=Macro_Mouse_over_cb.png|Macro_Mouse_over_cb|Macro Mouse over cb}}: This macro display all elements below cursor (elements covered by other elements will also be displayed).
 +
 
 +
<!--T:252-->
 +
* {{MacroLink|Icon=Macro_ObjectInfo.png|Macro_ObjectInfo|Macro ObjectInfo}}: User-friendly "Info" module created by a FreeCAD user.
 +
 
 +
<!--T:253-->
 +
* {{MacroLink|Icon=Macro_SimpleProperties.png|Macro_SimpleProperties|Macro SimpleProperties}}: Display in a concise way basic physical properties of an object (volume, bound box dimensions, ...).
  
 
</translate>
 
</translate>
 
</div>
 
</div>
 
</div>
 
</div>
 
 
<div class="toccolours mw-collapsible mw-collapsed">
 
<div class="toccolours mw-collapsible mw-collapsed">
 
<translate>
 
<translate>
  
===[[File:Draft_VisGroup.svg]] Libraries=== <!--T:113-->
+
===[[File:Draft_VisGroup.svg|32px]] Libraries=== <!--T:113-->
  
 
</translate>
 
</translate>
Line 238: Line 391:
 
<translate>
 
<translate>
  
<!--T:114-->
+
<!--T:254-->
* {{MacroLink|Icon=Macro_screw_maker1_2.png|Macro screw maker1_2|Macro screw maker1_2}}: This macro creates a screw with or without thread, according to ISO standards ([http://forum.freecadweb.org/viewtopic.php?f=22&t=6088#p48519 screw_maker1_6.py.zip with Pyside support]). [http://forum.freecadweb.org/viewtopic.php?f=22&t=6558&start=30#p95929 (Screw Maker 2.0 - new version!)]
+
* {{MacroLink|Icon=Macro_BOLTS.png|Macro_BOLTS|Macro BOLTS}}: The aim of BOLTS is to build a free and open-source standard parts library for CAD applications.
* {{MacroLink|Icon=Macro_BOLTS.png|Macro BOLTS|Macro BOLTS}}: The aim of BOLTS is to build a free and open-source standard parts library for CAD applications.
+
 
* {{MacroLink|Icon=FreeCAD Doc.png|Macro PartsLibrary|Macro PartsLibrary}}: Starts the Parts library browser
+
<!--T:255-->
 +
* {{MacroLink|Icon=FreeCAD_Doc.png|Macro_PartsLibrary|Macro PartsLibrary}}: Starts the Parts library browser.
 +
 
 +
<!--T:256-->
 +
* {{MacroLink|Icon=Macro_screw_maker1_2.png|Macro_screw_maker1_2|Macro screw maker1_2}}: This macro creates a screw with or without thread, according to ISO standards ([http://forum.freecadweb.org/viewtopic.php?f=22&t=6088#p48519 screw_maker1_6.py.zip with Pyside support]). [http://forum.freecadweb.org/viewtopic.php?f=22&t=6558&start=30#p95929 (Screw Maker 2.0 - new version!)]  
 +
 
 
</translate>
 
</translate>
 
</div>
 
</div>
 
</div>
 
</div>
 
 
<div class="toccolours mw-collapsible mw-collapsed">
 
<div class="toccolours mw-collapsible mw-collapsed">
 
<translate>
 
<translate>
  
===[[File:Bound-expression.svg]] Mathematical functions=== <!--T:115-->
+
===[[File:Bound-expression.svg|32px]] Mathematical functions=== <!--T:115-->
  
 
</translate>
 
</translate>
Line 255: Line 412:
 
<translate>
 
<translate>
  
<!--T:116-->
+
<!--T:257-->
* {{MacroLink|Icon=Parametric_Curve_FP.svg|Macro Parametric_Curve_FP|Macro Parametric Curve FP}}: Feature python update of Macro 3D Parametric Curve.
+
* {{MacroLink|Icon=Macro_3D_Parametric_Curve.png|Macro_3D_Parametric_Curve|Macro 3D Parametric Curve}}: Draw a function described by parametric equations x(t), y(t) and z(t).
* {{MacroLink|Icon=Macro_3D_Parametric_Curve.png|Macro 3D Parametric Curve|Macro 3D Parametric Curve}}: Draw a function described by parametric equations x(t), y(t) and z(t).
+
 
* {{MacroLink|Icon=Macro_Draw_2D_Function.png|Macro Draw 2D Function|Macro Draw 2D Function}}: draws a function described by an equation z=F(x)
+
<!--T:258-->
* {{MacroLink|Icon=Macro_Draw_Parametric_2D_Function.png|Macro Draw Parametric 2D Function|Macro Draw Parametric 2D Function}}: Based on the above macro, but for parametric and optionally polar
+
* {{MacroLink|Icon=Macro_Draw_2D_Function.png|Macro_Draw_2D_Function|Macro Draw 2D Function}}: Draws a function described by an equation z=F(x).
* {{MacroLink|Icon=WF_wf.png|Macro WorkFeatures|Macro WorkFeatures}}: Tool utility : Tab > Wire > Curves And Surfaces {{KEY|Launch Curves and Surfaces Menu ...}}
+
 
equations.
+
<!--T:259-->
 +
* {{MacroLink|Icon=Macro_Draw_Parametric_2D_Function.png|Macro_Draw_Parametric_2D_Function|Macro Draw Parametric 2D Function}}: Based on the above macro, but for parametric and optionally polar.
 +
 
 +
<!--T:260-->
 +
* {{MacroLink|Icon=Parametric_Curve_FP.svg|Macro_Parametric_Curve_FP|Macro Parametric Curve FP}}: Feature Python update of Macro 3D Parametric Curve.
  
 
</translate>
 
</translate>
 
</div>
 
</div>
 
</div>
 
</div>
 
 
<div class="toccolours mw-collapsible mw-collapsed">
 
<div class="toccolours mw-collapsible mw-collapsed">
 
<translate>
 
<translate>
  
===[[File:IFC.svg]] Multifunctional=== <!--T:117-->
+
===[[File:Part_Primitives.svg|32px]] Object creation=== <!--T:119-->
  
 
</translate>
 
</translate>
Line 276: Line 436:
 
<translate>
 
<translate>
  
<!--T:118-->
+
<!--T:261-->
* {{MacroLink|Icon=WF_wf.png|Macro WorkFeatures|Macro WorkFeatures}}: Tool utility to create plans of the axes, planes from 3 points, axes on a form, information on the coordinates of the shape and many other useful features to facilitate the creation of your project. This utility is up next in the combo view.
+
* {{MacroLink|Icon=AeroFoil.png|Macro_AeroFoil|Macro AeroFoil}}: AeroFoil creates airfoil curves and faces using pre-defined models, algebraic functions, and DAT or CSV Files.
 +
 
 +
<!--T:262-->
 +
* {{MacroLink|Icon=Macro_Airfoil_Import_&_Scale.png|Macro_Airfoil_Import_&_Scale|Macro Airfoil Import & Scale}}: Imports and scales a .dat airfoil to desired chord length.
 +
 
 +
<!--T:263-->
 +
* {{MacroLink|Icon=Part_Prism_Apothem.svg|Macro_Apothem_Based_Prism_GUI|Macro Apothem Based Prism GUI}}: A GUI dialog that creates an Apothem, (inradius) Based Prism from user input.
 +
 
 +
<!--T:264-->
 +
* {{MacroLink|Icon=Macro_Circle.png|Macro_circle|Macro Circle}}: Create a circle or arc giving radius, diameter, circumference, area, startangle, endangle, arc, anglecenter, cord, arrow, center (point) on choice (same above without GUI).
 +
 
 +
<!--T:265-->
 +
* {{MacroLink|Icon=Macro_CirclePlus.png|Macro_CirclePlus|Macro CirclePlus}}: Create a circle or arc giving radius, diameter, circumference, area, startangle, endangle, arc, anglecenter, cord, arrow, center (point) on choice (same below but with GUI) plus create sector and face.
 +
 
 +
<!--T:266-->
 +
* {{MacroLink|Icon=Macro_Cut_Circle.png|Macro_Cut_Circle|Macro Cut Circle}}: Cut a circle or arc and create x arcs, giving the number of cut.
 +
 
 +
<!--T:267-->
 +
* {{MacroLink|Icon=Macro_Cut_Line.png|Macro_Cut_Line|Macro Cut Line}}: Cut a line and create x points, giving the number of points, create line or not, create points or not, create bicolor or not on choice.
 +
 
 +
<!--T:268-->
 +
* {{MacroLink|Icon=Cam-groover-icon-32x32.png|Macro_FCCamGroover|Macro FCCamGroover}}: Creates grooved cylinder for cam.
 +
 
 +
<!--T:269-->
 +
* {{MacroLink|Icon=FCCircularTextButtom.png|Macro_FCCircularText|Macro FCCircularText}}: This macro create a text around a cylinder.
 +
 
 +
<!--T:270-->
 +
* {{MacroLink|Icon=FCHoneycombMakerIcon.png|Macro_FCHoneycombMaker|Macro FCHoneycombMaker}}: Creates parametric honeycomb grid.
 +
 
 +
<!--T:271-->
 +
* {{MacroLink|Icon=FCSpring_Helix_Variable.png|Macro_FCSpring_Helix_Variable|Macro FCSpring Helix Variable}}: This macro creates one spring truncate, the troncature is adjustable on the all coil to choice.
 +
 
 +
<!--T:272-->
 +
* {{MacroLink|Icon=FCSpring_On_Surface.png|Macro_FCSpring_On_Surface|Macro FCSpring On Surface}}: This macro creates one spring (helix) on the surface of the object (solide).
 +
 
 +
<!--T:273-->
 +
* {{MacroLink|Icon=FCCreaLoft.png|Macro_Loft|Macro Loft}}: Create a loft with a list of wire (specially created for [[Macro_Texture|Macro Texture]]).
 +
 
 +
<!--T:274-->
 +
* {{MacroLink|Icon=Macro_Geodesic_Dome.svg|Macro_Geodesic_Dome|Macro Geodesic Dome}}: This macro creates a geodesic dome shell.
 +
 
 +
<!--T:275-->
 +
* {{MacroLink|Icon=Macro_Guitar_fretboard.png|Macro_Guitar_fretboard|Macro Guitar fretboard}}: Guitar Fretboard Maker.
 +
 
 +
<!--T:276-->
 +
* {{MacroLink|Icon=Macro_Guitar_Nut.png|Macro_Guitar_Nut|Macro Guitar Nut}}: Guitar Nut Maker.
 +
 
 +
<!--T:277-->
 +
* {{MacroLink|Icon=Hilbert_curve_icon.png|Macro_HilbertCurve|Macro HilbertCurve}}: Creates an Hilbert curve wire in 2 or 3 dimensions with many iterations.
 +
 
 +
<!--T:278-->
 +
* {{MacroLink|Icon=Macro_Honeycomb.svg|Macro_Honeycomb|Macro Honeycomb}}: Creates a feature Python Honeycomb object compatible in and out of PartDesign.
 +
 
 +
<!--T:279-->
 +
* {{MacroLink|Icon=ImportAirfoil.svg|Macro_ImportAirfoil|Macro ImportAirfoil}}: Airfoil coordinates import, then scale the airfoil, rotate, translate in the plane, translate along the span, select the plane and the main axis, and turn the geometry into a sketch.
 +
 
 +
<!--T:280-->
 +
* {{MacroLink|Icon=Intersection_Icon.svg|Macro_Intersection|Macro Intersection}}: Finds the intersection between 2 or 3 selected edges/faces, works with Datum Planes and Datum Lines also. Creates a parametric feature Python object containing the shape of the intersection.
 +
 
 +
<!--T:281-->
 +
* {{MacroLink|Icon=Macro_Line_Length.png|Macro_Line_Length|Macro Line Length}}: Create a line giving coordinate XYZ length and angle to plane X Y.
 +
 
 +
<!--T:282-->
 +
* {{MacroLink|Icon=Macro_makeCube.png|Macro_Make_Cube|Macro Make Cube}}: Creates a [http://en.wikipedia.org/wiki/Cuboid rectangular cuboid] from 4 points.
 +
 
 +
<!--T:283-->
 +
* {{MacroLink|Icon=Dodecahedron.svg|Macro_Polyhedrons|Macro Polyhedrons}}: This macro creates parametric polyhedrons (dodecahedron, icosahedron, tetrahedron, ...). Customizable via radius or side.
 +
 
 +
<!--T:284-->
 +
* {{MacroLink|Icon=Pyramidicon.svg|Macro_Pyramid|Macro Pyramid}}: This macro creates a parametric pyramid. All parameters are customizable just like with Part Cone.
 +
 
 +
<!--T:285-->
 +
* {{MacroLink|Icon=Macro_ReproWire.png|Macro_Repro_Wire|Macro Repro Wire}}: This macro reproduces all element selected subobject wire or face.
 +
 
 +
<!--T:286-->
 +
* {{MacroLink|Icon=Macro_Site_From_Contours.png|Macro_Site_From_Contours|Macro Site From Contours}}: Creates an Arch Site from a series of contour lines.
 +
 
 +
<!--T:287-->
 +
* {{MacroLink|Icon=Macro_Solid_Sweep.png|Macro_Solid_Sweep|Macro Solid Sweep}}: Creates a solid by sweeping a 2D profile along a trajectory previously selected in the 3D view. The 2D elements can be created through the regular tools in FreeCAD's GUI.
 +
 
 +
<!--T:288-->
 +
* {{MacroLink|Icon=Macro_Triangle_AH.png|Macro_Triangle_AH|Macro Triangle AH}}: This macro creates a triangle by giving the head angle and the height of the triangle (the head of the  triangle is positioned to the xyz coordinates 0.0).
 +
 
 +
<!--T:289-->
 +
* {{MacroLink|Icon=Macro_WireXYZ.png|Macro_WireXYZ|Macro WireXYZ}}: This macro creates a Wire with the coordinates extracted from a file. The coordinates X Y Z are separated by a space.
 +
 
 
</translate>
 
</translate>
 
</div>
 
</div>
 
</div>
 
</div>
 
 
<div class="toccolours mw-collapsible mw-collapsed">
 
<div class="toccolours mw-collapsible mw-collapsed">
 
<translate>
 
<translate>
  
===[[File:Workbench_Image.svg]] Object creation=== <!--T:119-->
+
===[[File:Std_TransformManip.svg|32px]] Object transformation=== <!--T:121-->
  
 
</translate>
 
</translate>
Line 291: Line 535:
 
<translate>
 
<translate>
  
<!--T:120-->
+
<!--T:290-->
* {{MacroLink|Icon=Macro_makeCube.png|Macro Make Cube|Macro Make Cube}}: creates a [http://en.wikipedia.org/wiki/Cuboid rectangular cuboid] from 4 points
+
* {{MacroLink|Icon=Macro_Align_Object_to_View.png|Macro_Align_Object_to_View|Macro Align Object to View}}: This macro align the selected object to the current View and set the coordinates Placement of the camera.
* {{MacroLink|Icon=Macro_Solid_Sweep.png|Macro Solid Sweep|Macro Solid Sweep}}: creates a solid by sweeping a 2D profile along a trajectory previously selected in the 3D view. The 2D elements can be created through the regular tools in FreeCAD's GUI.
+
 
* {{MacroLink|Icon=Macro_Geodesic_Dome.svg|Macro Geodesic Dome|Macro Geodesic Dome}}: This macro creates a geodesic dome shell
+
<!--T:291-->
* {{MacroLink|Icon=Pyramidicon.svg|Macro Pyramid|Macro Pyramid}}: This macro creates a parametric pyramid. All parameters are customizable just like with Part Cone.
+
* {{MacroLink|Icon=Macro_ArrayCopy.png|Macro_ArrayCopy|Macro ArrayCopy}}: Copies the selected object several times, on an array grid.
* {{MacroLink|Icon=Dodecahedron.svg|Macro Polyhedrons|Macro Polyhedrons}}: This macro creates parametric polyhedrons (dodecahedron, icosahedron, tetrahedron, ...). Customizable via radius or side.
+
 
* {{MacroLink|Icon=Macro_Line_Length.png|Macro Line Length|Macro Line Length}}: Create a line giving coordinate XYZ length and angle to plane X Y
+
<!--T:292-->
* {{MacroLink|Icon=Macro_Cut_Line.png|Macro cutLine|Macro Cut Line}}: Cut a line and create x points, giving the number of points, create line or not, create points or not, create bicolor or not on choice.
+
* {{MacroLink|Icon=Bevel.svg|Macro_Bevel|Macro Bevel}}: Bevels selected vertices, creates parametric feature Python object, compatible with all solids (except with round edges) including features in Part Design bodies.
* {{MacroLink|Icon=Macro CirclePlus.png|Macro CirclePlus|Macro CirclePlus}}: Create a circle or arc giving radius, diameter, circumference, area, startangle, endangle, arc, anglecenter, cord, arrow, center (point) on choice (same below but with GUI) plus create sector and face.
+
 
* {{MacroLink|Icon=Macro_Circle.png|Macro circle|Macro Circle}}: Create a circle or arc giving radius, diameter, circumference, area, startangle, endangle, arc, anglecenter, cord, arrow, center (point) on choice (same above without GUI).
+
<!--T:293-->
* {{MacroLink|Icon=Macro_Cut_Circle.png|Macro cutCircle|Macro Cut Circle}}: Cut a circle or arc and create x arcs, giving the number of cut.
+
* {{MacroLink|Icon=Macro_Center_Align_Objects_with_Faces_or_Edges.png|Macro_Center_Align_Objects_with_Faces_or_Edges|Macro Center Align Objects with Faces or Edges}}: This macro covers the following constraints: Concentric constraint among non cylindrical parts; and Constraint on center Faces and/or Edges. It works also with the new Body and App::Part containers, as well as with STEP hierarchy.
* {{MacroLink|Icon=Macro_Triangle_AH.png|Macro triangleAH|Macro Triangle AH}}: This macro create one triangle creates a triangle by giving the head angle and the height of the triangle (the triangle of the head is positioned to the xyz coordinates 0.0)
+
 
* {{MacroLink|Icon=FCTexture.png|Macro FCTexture|Macro Texture}}: Create a project from a bmp image to create a texture easily
+
<!--T:294-->
* {{MacroLink|Icon=FCCreaLoft.png|Macro FCCreaLoft|Macro Loft}}: Create a loft with a list of wire (specially created for Macro Texture see above)
+
* {{MacroLink|Icon=Macro_CloneConvert‎.png|Macro_CloneConvert‎|Macro CloneConvert}}: Creates a clone of the object and the converted in the chosen position and size (inch, mm, m, µm...). The base object is recognized in mm (FreeCAd base).
* {{MacroLink|Icon=FCCircularTextButtom.png|Macro_FCCircularText|Macro Circular Text}}: This macro create a text around a cylinder
+
 
* {{MacroLink|Icon=Macro_WireXYZ.png|Macro WireXYZ|Macro WireXYZ}}: This macro creates a Wire with the coordinates extracted from a file. The coordinates X Y Z are separated by a space.
+
<!--T:295-->
* {{MacroLink|Icon=Macro_ReproWire.png|Macro ReproWire|Macro Repro Wire}}: This macro reproduce all element selected subobject wire or face.
+
* {{MacroLink|Icon=Macro_Connect_And_Sweep.png|Macro_Connect_And_Sweep|Macro Connect And Sweep}}: This macro easily creates a connection between two objects, an object and a point or between two points or the selected line, wire, edge (the center of the objects are the starting and ending points of the sweep) can be selected form a configurable ellipse polygon circle.
* {{MacroLink|Icon=Part_Prism_Apothem.svg|Macro Apothem Based Prism GUI|Macro Apothem Based Prism GUI}}: A GUI dialog that creates an Apothem, (inradius) Based Prism from user input.
+
 
* {{MacroLink|Icon=FCSpring_Helix_Variable.png|Macro FCSpring Helix Variable|Macro FCSpring Helix Variable}}: This macro create one spring truncate, the troncature is adjustable on the all coil to choice.
+
<!--T:296-->
* {{MacroLink|Icon=FCSpring_On_Surface.png|Macro_FCSpring On Surface|Macro FCSpring On Surface}}: This macro create one spring (helix) on the surface of the object (solide).
+
* {{MacroLink|Icon=Macro_FlattenWire.png|Macro_FlattenWire|Macro FlattenWire}}: Flattens draft wires that are not planar to their median Z coordinate.
* {{MacroLink|Icon=Macro_Guitar_fretboard.png|Macro Guitar fretboard|Macro Guitar fretboard}}: Guitar Fretboard Maker
+
 
* {{MacroLink|Icon=Macro Guitar Nut.png|Macro Guitar Nut|Macro Guitar Nut}}: Guitar Nut Maker
+
<!--T:297-->
* {{MacroLink|Icon=Cam-groover-icon-32x32.png|Macro FCCamGroover|Macro FCCamGroover}}: Creates grooved cylinder for cam.
+
* {{MacroLink|Icon=Macro_FlattenWire3Points.png|Macro_FlattenWire3Points|Macro FlattenWire3Points}}: Flattens draft wires that are not planar to a plane defined by 3 points.
* {{MacroLink|Icon=Macro_Site_From_Contours.png|Macro Site From Contours|Macro Site From Contours}}: creates an Arch Site from a series of contour lines
+
 
* {{MacroLink|Icon=FCHoneycombMakerIcon.png|Macro FCHoneycombMaker|Macro FCHoneycombMaker}}: Creates parametric honeycomb grid.
+
<!--T:298-->
* {{MacroLink|Icon=Macro_Honeycomb.svg|Macro_Honeycomb|Macro Honeycomb}}: Creates a feature python Honeycomb object compatible in and out of PartDesign.
+
* {{MacroLink|Icon=Macro_HealArcs.png|Macro_HealArcs|Macro HealArcs}}: Sometimes arcs are transformed into BSplines, for example when scale operations have been applied to them. This macro recreates valid arcs from them. Useful before exporting to dxf.
* {{MacroLink|Icon=Hilbert curve icon.png|Macro HilbertCurve|Macro HilbertCurve}}: Creates an Hilbert curve wire in 2 or 3 dimensions with many iterations.
+
 
* {{MacroLink|Icon=AeroFoil.png|Macro_AeroFoil|Macro AeroFoil}}: AeroFoil creates airfoil curves and faces using pre-defined models, algebraic functions, and DAT or CSV Files.
+
<!--T:299-->
 +
* {{MacroLink|Icon=Image_Scaling.svg|Macro_Image_Scaling|Macro Image Scaling}}: Macro for easy scaling drawings, graphics, diagram, blueprint and similar 2D images in Image workbench.
 +
 
 +
<!--T:300-->
 +
* {{MacroLink|Icon=Macro_JointWire.png|Macro_JointWire|Macro JointWire}}: Allows to find and joint all non connected edge to the closest non connected one using a line.
 +
 
 +
<!--T:301-->
 +
* {{MacroLink|Icon=Macro_MatrixTransform.png|Macro_MatrixTransform|Macro MatrixTransform}}: Apply linear space transformations to distort shapes. E.g., non-uniform scaling, shearing, mirroring, axes swapping.
 +
 
 +
<!--T:302-->
 +
* {{MacroLink|Icon=Centericon.png|Macro_MoveToOrigin|Macro Move to Origin}}: This macro translates the Placement of an object so that a selected location becomes its new origin.
 +
 
 +
<!--T:303-->
 +
* {{MacroLink|Icon=Macro_Overlap.png|Macro_Overlap|Macro Overlap}}: Boolean operation. Similar to [[Part_Common|Part Common]], but with custom overlap count threshold (parametric).
 +
 
 +
<!--T:304-->
 +
* {{MacroLink|Icon=parametric_defeaturing.svg|Macro_Parametric_Defeaturing|Macro Parametric Defeaturing}}: Macro that provides parametric defeaturing inside and outside the [[PartDesign_Workbench|PartDesign Workbench]].
 +
 
 +
<!--T:305-->
 +
* {{MacroLink|Icon=Macro_Perpendicular_To_Wire.png|Macro_Perpendicular_To_Wire|Macro Perpendicular To Wire}}: This macro positions an object perpendicularl to a selected wire.
 +
 
 +
<!--T:306-->
 +
* {{MacroLink|Icon=Macro_PlacementAbsolufy.png|Macro_PlacementAbsolufy|Macro PlacementAbsolufy}}: Reset Part containers to global origin while maintaining objects absolute position.
 +
 
 +
<!--T:307-->
 +
* {{MacroLink|Icon=Macro_Remove_parametric_history.png|Macro_Remove_parametric_history|Macro Remove parametric history}}: Removes all parametric associativity from an object, leaving it as a "dumb" shape.
 +
 
 +
<!--T:308-->
 +
* {{MacroLink|Icon=Macro_Rotate_To_Point.png|Macro_Rotate_To_Point|Macro Rotate To Point}}: Macro to rotate an object around the center of its boundbox, its center of mass, or the last clicked point.
 +
 
 +
<!--T:309-->
 +
* {{MacroLink|Icon=Part_Section‎.png|Macro_Section|Macro Section}}: Alternative implementation of Part Section tool, more suitable for making sweep paths (parametric).
 +
 
 +
<!--T:310-->
 +
* {{MacroLink|Icon=Macro_StraightenObject.png|Macro_StraightenObject|Macro StraightenObject}}: Re-align object(s) with FreeCAD coordinate system according reference face/edge.
 +
 
 +
<!--T:311-->
 +
* {{MacroLink|Icon=Macro_SuperWire.png|Macro_SuperWire|Macro SuperWire}}: Forces the creation of a Wire from lines and arcs that don't necessarily touch each other. Use this if normal wire operation fails.
 +
 
 +
<!--T:312-->
 +
* {{MacroLink|Icon=Wirefilter.svg|Macro_WireFilter|Macro WireFilter}}: Filter wires from a sketch to only use certain ones, also 2D offsets, scales, rearranges wire order.
  
 
</translate>
 
</translate>
 
</div>
 
</div>
 
</div>
 
</div>
 
 
<div class="toccolours mw-collapsible mw-collapsed">
 
<div class="toccolours mw-collapsible mw-collapsed">
 
<translate>
 
<translate>
  
===[[File:Workbench_PartDesign.svg]] Object transformation=== <!--T:121-->
+
=== [[File:Part_FaceColors.svg|32px]] Object visibility, view properties and textures === <!--T:313-->
  
 
</translate>
 
</translate>
Line 333: Line 616:
 
<translate>
 
<translate>
  
<!--T:122-->
+
<!--T:314-->
* {{MacroLink|Icon=Macro_ArrayCopy.png|Macro ArrayCopy|Macro ArrayCopy}}: copies the selected object several times, on an array grid.
+
* [[Image:Text-x-python.png|24px]] [https://github.com/dprojects/Woodworking/blob/master/Tools/colorManager.py colorManager]: Allows to set face colors for all objects from a spreadsheet. Also you can browse colors for a manually selected face or object and see the effect in the 3D model in real-time.
* {{MacroLink|Icon=Bevel.svg|Macro Bevel|Macro Bevel}}: bevels selected vertices, creates parametric feature python object, compatible with all solids (except with round edges) including features in Part Design bodies.
+
 
* {{MacroLink|Icon=Macro_FlattenWire.png|Macro FlattenWire|Macro FlattenWire}}: flattens draft wires that are not planar to their median Z coordinate.
+
<!--T:315-->
* {{MacroLink|Icon=Macro_FlattenWire3Points.png|Macro FlattenWire3Points|Macro FlattenWire3Points}}: flattens draft wires that are not planar to a plane defined by 3 points.
 
* {{MacroLink|Icon=Macro_JointWire.png|Macro JointWire|Macro JointWire}}: allows to find and joint all non connected edge to the closest non connected one using a line.
 
* {{MacroLink|Icon=Macro_Remove_parametric_history.png|Macro Remove parametric history|Macro Remove parametric history}}: removes all parametric associativity from an object, leaving it as a "dumb" shape.
 
* {{MacroLink|Icon=Macro_SuperWire.png|Macro SuperWire|Macro SuperWire}}: Forces the creation of a Wire from lines and arcs that don't necessarily touch each other. Use this if normal wire operation fails.
 
* {{MacroLink|Icon=Macro_HealArcs.png|Macro HealArcs|Macro HealArcs}}: Sometimes arcs are transformed into BSplines, for example when scale operations have been applied to them. This macro recreates valid arcs from them. Useful before exporting to dxf.
 
* {{MacroLink|Icon=Macro_CloneConvert‎.png|Macro CloneConvert‎|Macro CloneConvert}}: Creates a clone of the object and the converted in the chosen position and size (inch, mm, m, µm...). The base object is recognized in mm (FreeCAd base).
 
* {{MacroLink|Icon=Image_Scaling.svg|Macro Image Scaling|Macro Image Scaling}}: Macro for easy scaling drawings, graphics, diagram, blueprint and similar 2D images in Image workbench.
 
* {{MacroLink|Icon=parametric_defeaturing.svg|Macro Parametric Defeaturing|Macro Parametric Defeaturing}}: Macro that provides parametric defeaturing inside and outside the [[PartDesign_Workbench|PartDesign Workbench]].
 
* {{MacroLink|Icon=Macro_MatrixTransform.png|Macro MatrixTransform|Macro MatrixTransform}}: apply linear space transformations to distort shapes. E.g., non-uniform scaling, shearing, mirroring, axes swapping.
 
* {{MacroLink|Icon=Macro_Connect_And_Sweep.png|Macro Connect And Sweep|Macro Connect And Sweep}}: This macro easily creates a connection between two objects, an object and a point or between two points or the selected line, wire, edge (the center of the objects are the starting and ending points of the sweep) can be selected form a configurable ellipse polygon circle.
 
* {{MacroLink|Icon=Part_Section‎.png|Macro Section|Macro Section}}: (parametric): alternative implementation of Part Section tool, more suitable for making sweep paths.
 
* {{MacroLink|Icon=Macro_Overlap.png|Macro Overlap|Macro Overlap}}: (parametric): Boolean operation. Similar to Part Common, but with custom overlap count threshold.
 
* {{MacroLink|Icon=Wirefilter.svg|Macro_WireFilter|Macro WireFilter}}: Filter wires from a sketch to only use certain ones, also 2D offsets, scales, rearranges wire order.
 
 
* {{MacroLink|Icon=Workbench_Image.svg|Macro_Colorize|Macro Colorize}}: Easily set colors of faces, edges, and vertices, including individual transparency levels.
 
* {{MacroLink|Icon=Workbench_Image.svg|Macro_Colorize|Macro Colorize}}: Easily set colors of faces, edges, and vertices, including individual transparency levels.
 +
 +
<!--T:316-->
 +
* {{MacroLink|Icon=Macro_HiddenAlls.png|Macro_HiddenAlls|Macro Hidden Alls objects}}: This macro check hidden all object in the document (Visibility=False).
 +
 +
<!--T:317-->
 +
* {{MacroLink|Icon=FCTexture.png|Macro_Texture|Macro Texture}}: Create a project from a bmp image to create a texture easily.
 +
 +
<!--T:318-->
 +
* {{MacroLink|Icon=Macro_Texture_Objects.png|Macro_Texture_Objects|Macro Texture Objects}}: This macro allows you to temporarily put a texture image on the selected objects.
 +
 +
<!--T:319-->
 +
* {{MacroLink|Icon=Macro_Toggle_Drawstyle.png|Macro_Toggle_Drawstyle|Macro Toggle Drawstyle}}: This macro toggles the Drawstyle of the selected object.
 +
 +
<!--T:320-->
 +
* {{MacroLink|Icon=Macro_Toggle_Drawstyle_Optimized.png|Macro_Toggle_Drawstyle_Optimized|Macro Toggle Drawstyle Optimized}}: This macro toggles the Drawstyle of the selected object (same as Macro Toggle Drawstyle above but optimized for all languages).
 +
 +
<!--T:321-->
 +
* {{MacroLink|Icon=Macro_SelectVisible.png|Macro_Toggle_Visibility|Macro Toggle Visibility}}: Set of three macro, macro '''1:''' hidden the objects not selected, macro '''2:''' displayed alls objects, macro '''3:''' hidden alls objects.
 +
 +
<!--T:322-->
 +
* {{MacroLink|Icon=Macro_SelectVisible2.png|Macro_Toggle_Visibility2_1-2|Macro Toggle Visibility2 1-2}}: Set of two macro, macro '''1:Macro_Toggle_Visibility2_1-2''' hidden the objects not selected, macro '''2:Macro_Toggle_Visibility2_2-2''' displayed alls objects, macro with the original visibility.
 +
 +
<!--T:323-->
 +
* {{MacroLink|Icon=Macro_VisibleAlls2.png|Macro_Toggle_Visibility2_2-2|Macro Toggle Visibility2 2-2}}: Set of two macro, macro '''1:Macro_Toggle_Visibility2_1-2''' hidden the objects not selected, macro '''2:Macro_Toggle_Visibility2_2-2''' displayed alls objects, macro with the original visibility.
 +
 +
<!--T:324-->
 +
* {{MacroLink|Icon=Macro_VisibleAlls.png|Macro_VisibleAlls|Macro Visible Alls objects}}: This macro check visible all object in the document (Visibility=True).
 +
 +
<!--T:325-->
 +
* {{MacroLink|Icon=Macro_Visibility_Manager.png|Macro_Visibility_Manager|Macro Visibility Manager}}: Manage visibility of document objects by type or individually.
 +
 +
<!--T:326-->
 +
* [[Image:Text-x-python.png|24px]] [https://github.com/dprojects/setTextures setTextures]: Allows to permanently store the URL of textures in a FreeCAD project and load stored textures.
  
 
</translate>
 
</translate>
 
</div>
 
</div>
 
</div>
 
</div>
 
 
<div class="toccolours mw-collapsible mw-collapsed">
 
<div class="toccolours mw-collapsible mw-collapsed">
 
<translate>
 
<translate>
  
===[[File:Workbench_PartDesign.svg]] PartDesign Workbench=== <!--T:166-->
+
===[[File:Workbench_PartDesign.svg|32px]] PartDesign Workbench=== <!--T:166-->
  
 
</translate>
 
</translate>
Line 367: Line 669:
  
 
<!--T:167-->
 
<!--T:167-->
* {{MacroLink|Icon=Workbench_PartDesign.svg|Macro PDWrapper|Macro PDWrapper}}: Encapsulates non-PartDesign solids for use in PartDesign Bodies, and more.
+
* {{MacroLink|Icon=Workbench_PartDesign.svg|Macro_PDWrapper|Macro PDWrapper}}: Encapsulates non-PartDesign solids for use in PartDesign Bodies, and more.
  
 
</translate>
 
</translate>
 
</div>
 
</div>
 
</div>
 
</div>
 
 
<div class="toccolours mw-collapsible mw-collapsed">
 
<div class="toccolours mw-collapsible mw-collapsed">
 
<translate>
 
<translate>
  
===[[File:View.svg]] Printer 3D=== <!--T:123-->
+
===[[File:View.svg|32px]] Printer 3D=== <!--T:123-->
  
 
</translate>
 
</translate>
Line 382: Line 683:
 
<translate>
 
<translate>
  
<!--T:124-->
+
<!--T:327-->
* {{MacroLink|Icon=Macro_3d_Printer_Slicer.png|Macro 3d Printer Slicer|Macro 3d Printer Slicer}}: Exports current design to slicer software or CAM software.
+
* {{MacroLink|Icon=Macro_3d_Printer_Slicer.png|Macro_3d_Printer_Slicer|Macro 3d Printer Slicer}}: Exports current design to slicer software or CAM software.
* {{MacroLink|Icon=Macro_3d_Printer_Slicer_Individual_Parts.svg|Macro_3d_Printer_Slicer_Individual_Parts|Macro 3d Printer Slicer Individual Parts}}: This code, when run, will export the visible bodies at the top level (bodies deeper in the tree will be ignored) of the currently open design to individual STL files, and open them it in the slicing software that you use. This macro will look for Cura as the default but you can change it to any other slider by changing the SLICERAPP variable in the source code.  
+
 
 +
<!--T:328-->
 +
* {{MacroLink|Icon=Macro_3d_Printer_Slicer_Individual_Parts.svg|Macro_3d_Printer_Slicer_Individual_Parts|Macro 3d Printer Slicer Individual Parts}}: This code, when run, will export the visible bodies at the top level (bodies deeper in the tree will be ignored) of the currently open design to individual STL files, and open them it in the slicing software that you use. This macro will look for Cura as the default but you can change it to any other slicer by changing the SLICERAPP variable in the source code.
  
 
</translate>
 
</translate>
 
</div>
 
</div>
 
</div>
 
</div>
 
 
<div class="toccolours mw-collapsible mw-collapsed">
 
<div class="toccolours mw-collapsible mw-collapsed">
 
<translate>
 
<translate>
  
===[[File:Preferences-raytracing.svg]] Raytracing=== <!--T:125-->
+
===[[File:Preferences-raytracing.svg|32px]] Raytracing=== <!--T:125-->
  
 
</translate>
 
</translate>
Line 400: Line 702:
  
 
<!--T:126-->
 
<!--T:126-->
* {{MacroLink|Icon=Macro_FreeCAD_to_Kerkythea.png|Macro FreeCAD to Kerkythea|Macro FreeCAD to Kerkythea}}: Export from FreeCAD to Kerkythea
+
* {{MacroLink|Icon=Macro_FreeCAD_to_Kerkythea.png|Macro_FreeCAD_to_Kerkythea|Macro FreeCAD to Kerkythea}}: Export from FreeCAD to Kerkythea.
  
 
</translate>
 
</translate>
 
</div>
 
</div>
 
</div>
 
</div>
 
 
<div class="toccolours mw-collapsible mw-collapsed">
 
<div class="toccolours mw-collapsible mw-collapsed">
 
<translate>
 
<translate>
  
===[[File:Spreadsheet.svg]] Spreadsheet Workbench=== <!--T:127-->
+
===[[File:Spreadsheet.svg|32px]] Spreadsheet Workbench=== <!--T:127-->
  
 
</translate>
 
</translate>
Line 415: Line 716:
 
<translate>
 
<translate>
  
<!--T:128-->
+
<!--T:329-->
* {{MacroLink|Icon=aliasmanager_icon.png|Macro Alias Manager|Macro Alias Manager}}: helps managing aliases inside FreeCAD Spreadsheet workbench. It is able to create, delete, move aliases and create a 'part family' group of files.
+
* {{MacroLink|Icon=aliasmanager_icon.png|Macro_Alias_Manager|Macro Alias Manager}}: Helps managing aliases inside FreeCAD Spreadsheet workbench. It is able to create, delete, move aliases and create a 'part family' group of files.
* {{MacroLink|Icon=easy-alias-icon.png|Macro EasyAlias|Macro EasyAlias}}: Quickly create aliases in FreeCAD Spreadsheet workbench. It uses the labels from one column to create aliases for adjacent cells in the next column to the right, e.g. labels from Column A become aliases for the cells in Column B.
+
 
* {{MacroLink|Icon=Macro_SpreadsheetTools.png|Macro SpreadsheetTools|Macro Spreadsheet Tools}}: This macro helps managing cells inside FreeCAD Spreadsheet workbench.
+
<!--T:330-->
* {{MacroLink|Icon=Macro_FCSpreadsheet_Extract.png|Macro FCSpreadSheet Extract|Macro FCSpreadSheet Extract}}: This macro save the data in a csv file with the formula or in a xml file.
+
* {{MacroLink|Icon=easy-alias-icon.png|Macro_EasyAlias|Macro EasyAlias}}: Quickly create aliases in FreeCAD Spreadsheet workbench. It uses the labels from one column to create aliases for adjacent cells in the next column to the right, e.g. labels from Column A become aliases for the cells in Column B.
* {{MacroLink|Icon=Applications-python.svg|Macro Spreadsheet2html|Macro Spreadsheet2html}}: Exports a spreadsheet as styled html. Intended as support in transfering data to office suits.
+
 
* [[Image:Text-x-python.png|24px]] [https://github.com/dprojects/sheet2export sheet2export]: allows to export FreeCAD spreadsheet to file formats (.md, .html, .csv, .json).
+
<!--T:331-->
 +
* {{MacroLink|Icon=Macro_FCSpreadsheet_Extract.png|Macro_FCSpreadSheet_Extract|Macro FCSpreadSheet Extract}}: This macro save the data in a csv file with the formula or in a xml file.
 +
 
 +
<!--T:332-->
 +
* {{MacroLink|Icon=Macro_SpreadsheetTools.png|Macro_SpreadsheetTools|Macro Spreadsheet Tools}}: This macro helps managing cells inside FreeCAD Spreadsheet workbench.
 +
 
 +
<!--T:333-->
 +
* {{MacroLink|Icon=Applications-python.svg|Macro_Spreadsheet2html|Macro Spreadsheet2html}}: Exports a spreadsheet as styled html. Intended as support in transfering data to office suits.
 +
 
 +
<!--T:334-->
 +
* [[Image:Text-x-python.png|24px]] [https://github.com/dprojects/sheet2export sheet2export]: Allows to export FreeCAD spreadsheet to file formats (.md, .html, .csv, .json).
  
 
</translate>
 
</translate>
 
</div>
 
</div>
 
</div>
 
</div>
 
 
<div class="toccolours mw-collapsible mw-collapsed">
 
<div class="toccolours mw-collapsible mw-collapsed">
 
<translate>
 
<translate>
  
===[[File:Arch_Survey.svg]] Utility=== <!--T:129-->
+
===[[File:Arch_Survey.svg|32px]] Utility=== <!--T:129-->
  
 
</translate>
 
</translate>
Line 436: Line 746:
 
<translate>
 
<translate>
  
<!--T:130-->
+
<!--T:335-->
* {{MacroLink|Icon=CenterFace.png|Macro CenterFace|Macro CenterFace}}: This macro red trace (editable) the center face (mass) with 1 point and print the coordinates
+
* {{MacroLink|Icon=Macro_Arch_Axis_System_Repartition.png|Macro_Arch_Axis_System_Repartition|Macro Arch Axis System Repartition}}: This macro help you to create an Arch Axis System along a line with a set of parameters.
* {{MacroLink|Icon=Macro_Center_Align_Objects_with_Faces_or_Edges.png|Macro Center Align Objects with Faces or Edges|Macro Center Align Objects with Faces or Edges}}: This macro covers the following constraints: - Concentric constraint among non cylindrical parts; - Constraint on center Faces and/or Edges. It works also with the new Body and App::Part containers, as well as with STEP hierarchy.
+
 
* {{MacroLink|Icon=Macro_Easy_Cutouts_for_Enclosures.png|Macro Easy cutouts for Enclosure Design|Macro Easy cutouts for Enclosure Design}}: This macro makes Cutouts for Enclosures in a very handy way
+
<!--T:336-->
* {{MacroLink|Icon=Macro_MacroMenu.png|Macro MacroMenu|Macro MacroMenu}}: Add the macros found in the macros folder to the Macros menu of FreeCAD
+
* {{MacroLink|Icon=Macro_Duplicate_Selection.png|Macro_Duplicate_Selection|Macro Duplicate Selection}}: This macro testing if one selection are duplicate, select the object IN THE 3D VIEW the "ForbiddenCursor" stay if the or one selection is duplicate, the macro stay resident.
* {{MacroLink|Icon=Force_Recompute.png|Macro ForceRecompute|Macro ForceRecompute}}: Forces manual recompute of model
+
 
* {{MacroLink|Icon=Macro_Recompute_Profiler.png|Macro Recompute Profiler|Macro Recompute Profiler}}: measures time it takes to recompute each object in a project
+
<!--T:337-->
* {{MacroLink|Icon=Macro_Shake_Sketch.png|Macro Shake Sketch|Macro Shake Sketch}}: Shake a sketch in order to discover its unconstrained parts.
+
* {{MacroLink|Icon=Macro_Easy_Cutouts_for_Enclosures.png|Macro_Easy_cutouts_for_Enclosure_Design|Macro Easy cutouts for Enclosure Design}}: This macro makes Cutouts for Enclosures in a very handy way.
* {{MacroLink|Icon=Replace_Part.png|Macro Replace Part in Assembly|Macro Replace Part in Assembly}}: Replaces a part (simple copy) in an "Assembly" with another Part (simple copy).
+
 
* {{MacroLink|Icon=Macro_Toggle_Drawstyle.png|Macro Toggle Drawstyle|Macro Toggle Drawstyle}}: This macro toggles the Drawstyle of the selected object
+
<!--T:338-->
* {{MacroLink|Icon=Macro_Toggle_Drawstyle_Optimized.png|Macro Toggle Drawstyle Optimized|Macro Toggle Drawstyle Optimized}}: This macro toggles the Drawstyle of the selected object (same Macro Toggle Drawstyle above optimized all language)
+
* {{MacroLink|Icon=Macro_ExpandTreeItem.png|Macro_ExpandTreeItem|Macro ExpandTreeItem}}: This macro expand selected items in the tree view. If not selection all item are expand/collapse.
* {{MacroLink|Icon=Macro_HighlightCommon.png|Macro HighlightCommon|Macro HighlightCommon}}: Highlight common parts.
+
 
* {{MacroLink|Icon=HighlightDifference.png|Macro HighlightDifference|Macro HighlightDifference}}: Compute the difference between two shapes.
+
<!--T:339-->
* {{MacroLink|Icon=Macro_cross_section.png|Macro cross section|Macro cross section}}: displays an interactively slidable cross-section.
+
* {{MacroLink|Icon=Macro_findConfigFiles.png|Macro_findConfigFiles|Macro findConfigFiles}}: Finds user config files system.cfg and user.cfg, copies folder location to system clipboard, instructs user on renaming these files in order to reset FreeCAD settings, and opens folder with default file browser.
* {{MacroLink|Icon=Macro_Print_SceneGraph.png|Macro Print_SceneGraph|Macro Print_SceneGraph}}: prints the SceneGraph.
+
 
* {{MacroLink|Icon=BoundBoxTracing.png|Macro BoundingBox Tracing|Macro BoundingBox Tracing}}: This macro red trace (editable) around the BoundingBox with 6 rectangles
+
<!--T:340-->
* {{MacroLink|Icon=Macro_Arch_Axis_System_Repartition.png|Macro Arch Axis System Repartition|Macro Arch Axis System Repartition}}: This macro help you to create an Arch Axis System along a line with a
+
* {{MacroLink|Icon=Force_Recompute.png|Macro_ForceRecompute|Macro ForceRecompute}}: Forces manual recompute of model.
* {{MacroLink|Icon=Macro Perpendicular To Wire.png|Macro Perpendicular To Wire|Macro Perpendicular To Wire}}: This macro positioned your object perpendicularly to wire selected.
+
 
* {{MacroLink|Icon=Macro_merge_duplicate_materials.png|Macro merge duplicate materials|Macro merge duplicate materials}}: Merges materials that have the same base name (with different numeral endings like 001, 002,...) into one.
+
<!--T:341-->
* {{MacroLink|Icon=Macro_Unbind_Numpad_Shortcuts.png|Macro Unbind Numpad Shortcuts|Macro Unbind Numpad Shortcuts}}: rebinds standard view commands from digit keys to Ctrl+digit, so that they don't spin the view by accident when entering numbers.
+
* {{MacroLink|Icon=Macro_If_Selected_Stay_If_Not_Then_Delete.png|Macro_If_Selected_Stay_If_Not_Then_Delete|Macro If Selected Stay If Not Then Delete}}: All object not selected are deleted!
* {{MacroLink|Icon=Macro_findConfigFiles.png|Macro findConfigFiles|Macro findConfigFiles}}: finds user config files system.cfg and user.cfg, copies folder location to system clipboard, instructs user on renaming these files in order to reset FreeCAD settings, and opens folder with default file browser.
+
 
* {{MacroLink|Icon=Snip.png|Macro Snip|Macro Snip}}: Easily post screenshots to the FreeCAD forum.
+
<!--T:342-->
* {{MacroLink|Icon=Pinger_Icon.svg|Macro Pinger|Macro Pinger}}: Ping users on the forum with ease.
+
* {{MacroLink|Macro_ImperialScales|Macro ImperialScales}}: Shows a list of US Imperial Arch scales list with the corresponding factor to apply to TechDraw pages or views.
* {{MacroLink|Icon=SketchUnmap.svg|Macro SketchUnmap|Macro SketchUnmap}}: unmap a sketch from its current support and makes its placement absolute, eventually creating a locating datum plane.
+
 
* {{MacroLink|Icon=Macro_PlacementAbsolufy.png|Macro PlacementAbsolufy|Macro PlacementAbsolufy}}: reset Part containers to global origin while maintaining objects absolute position.
+
<!--T:343-->
* {{MacroLink|Macro SplitPropEditor|Macro SplitPropEditor}}: temporarily split the property editor from the combo view to a separated dock widget
+
* {{MacroLink|Icon=Macro_merge_duplicate_materials.png|Macro_merge_duplicate_materials|Macro merge duplicate materials}}: Merges materials that have the same base name (with different numeral endings like 001, 002,...) into one.
* {{MacroLink|Icon=Macro_StraightenObject.png|Macro StraightenObject|Macro StraightenObject}}: re-align object(s) with FreeCAD coordinate system according reference face/edge
+
 
* {{MacroLink|Icon=Macro_Visibility_Manager.png|Macro_Visibility_Manager|Macro_Visibility_Manager}}: manage visibility of document objects by type or individually
+
<!--T:344-->
* {{MacroLink|Macro TreeToAscii|Macro TreeToAscii}}: Prints model tree as "ASCII art" with custom pattern & style, and export to clipboard, file or embedded document
+
* {{MacroLink|Icon=Pinger_Icon.svg|Macro_Pinger|Macro Pinger}}: Ping users on the forum with ease.
* {{MacroLink|Icon=Macro_FCTreeView.png|Macro_FCTreeView|Macro FCTreeView}}: Macro for list all objects in the project in one list without hierarchy, options sort by name, label, visibility, group, by length option search by name, label .... without case sensitive  or with case sensitive and select all objects displayed in the macro window.
+
 
* {{MacroLink|Macro ImperialScales|Macro ImperialScales}}: Shows a list of US Imperial Arch scales list with the corresponding factor to apply to TechDraw pages or views
+
<!--T:345-->
 +
* {{MacroLink|Icon=Macro_Recompute_Profiler.png|Macro_Recompute_Profiler|Macro Recompute Profiler}}: Measures time it takes to recompute each object in a project.
 +
 
 +
<!--T:346-->
 +
* {{MacroLink|Icon=Replace_Part.png|Macro_Replace_Part_in_Assembly|Macro Replace Part in Assembly}}: Replaces a part (simple copy) in an "Assembly" with another Part (simple copy).
 +
 
 +
<!--T:347-->
 +
* {{MacroLink|Icon=Macro_Select_Hovering.png|Macro_Select_Hovering|Macro Select Hovering}}: This macro select a choice Face, Edge, Vertex hovering by the mouse.
 +
 
 +
<!--T:348-->
 +
* {{MacroLink|Icon=SelectVisible.png|Macro_SelectVisible|Macro SelectVisible}}: All visible objects in the tree will be selected.
 +
 
 +
<!--T:349-->
 +
* {{MacroLink|Icon=Macro_Shake_Sketch.png|Macro_Shake_Sketch|Macro Shake Sketch}}: Shake a sketch in order to discover its unconstrained parts.
 +
 
 +
<!--T:350-->
 +
* {{MacroLink|Icon=SketchUnmap.svg|Macro_SketchUnmap|Macro SketchUnmap}}: Unmap a sketch from its current support and makes its placement absolute, eventually creating a locating datum plane.
 +
 
 +
<!--T:351-->
 +
* {{MacroLink|Macro_TreeToAscii|Macro TreeToAscii}}: Prints model tree as "ASCII art" with custom pattern & style, and export to clipboard, file or embedded document.
 +
 
 +
<!--T:352-->
 +
* {{MacroLink|Icon=Macro_Unbind_Numpad_Shortcuts.png|Macro_Unbind_Numpad_Shortcuts|Macro Unbind Numpad Shortcuts}}: Rebinds standard view commands from digit keys to Ctrl+digit, so that they don't spin the view by accident when entering numbers.
 +
 
 +
<!--T:353-->
 +
* {{MacroLink|Icon=WF_wf.png|Macro_WorkFeatures|Macro WorkFeatures}}: Tool utility to create points, axes, planes and many other useful features to facilitate the creation of your project.
  
 
</translate>
 
</translate>
 
</div>
 
</div>
 
</div>
 
</div>
 
 
<div class="toccolours mw-collapsible mw-collapsed">
 
<div class="toccolours mw-collapsible mw-collapsed">
 
<translate>
 
<translate>
  
===[[File:Bulb.svg]] Wizards=== <!--T:131-->
+
===[[File:Bulb.svg|32px]] Wizards=== <!--T:131-->
  
 
</translate>
 
</translate>
Line 481: Line 815:
 
<translate>
 
<translate>
  
<!--T:132-->
+
<!--T:354-->
* {{MacroLink|Icon=Macro_Sheet_Metal_Unfolder.png|Macro Sheet Metal Unfolder|Macro Sheet Metal Unfolder}}: Creates an unfolded part from a sheet-metal-part.
+
* {{MacroLink|Icon=Macro_Corner_shapes_wizard.png|Macro_Corner_shapes_wizard/update|Macro Corner shapes wizard/update}}: Pops up a dialog asking for the dimensions of your corner piece, then creates the object in the document and creates a page view with top, front and lateral views of the piece.
* {{MacroLink|Icon=Macro_Unroll_Ruled_Surface.png|Macro Unroll Ruled Surface|Macro Unroll Ruled Surface}}: allows to unroll ruled surfaces and to draw them on a page.
+
 
* {{MacroLink|Icon=Macro_Unfold_Box.png|Macro Unfold Box|Macro Unfold Box}}: allows to unfold the surfaces of a box of any shape and to draw them on a page.
+
<!--T:355-->
* {{MacroLink|Icon=Macro_Airfoil_Import_&_Scale.png|Macro Airfoil Import & Scale|Macro Airfoil Import & Scale}}: Imports and scales a .dat airfoil to desired chord length.
+
* {{MacroLink|Icon=Gearworkbech.png|Macro_FCGear|Macro FCGear}}: Additional Workbench to create different types of gears, involute gear, involute rack, cycloide gear, bevel gear.
* {{MacroLink|Icon=GW_Dim.png|Macro Geneva Wheel|Macro Geneva Wheel}}: Allows the user to create a Geneva wheel mechanism from scratch. Must edit values within the Macro to alter the size of the object.
+
 
* {{MacroLink|Icon=GW_Dim.png|Macro Geneva Wheel GUI|Macro Geneva Wheel GUI}}: A GUI front end that allows the user to create a Geneva wheel mechanism from scratch.
+
<!--T:356-->
* {{MacroLink|Icon=Macro Half_turn_stairs.png|Macro Half turn stairs|Macro Half turn stairs}}: Creates a half turn (left/right) stair from a Data-file.
+
* {{MacroLink|Icon=Macro_Fonts_Win10_PYMP.png|Macro_Fonts_Win10_PYMP|Macro Fonts Win10 PYMP}}: This little macro is dedicate to users of Windows 10. The explorer fonts for use the [[Draft_ShapeString|ShapeString]] is empty and this little macro can help you see easily the font to use.
* {{MacroLink|Icon=Macro_Half_Hull_Model.png|Macro Half-Hull Model|Macro Half-Hull Model}}: This macro generates both three dimensional [http://en.wikipedia.org/wiki/Half_hull_model_ship half-hull] and full-hull models from a series of 2D line drawings.
+
 
* {{MacroLink|Icon=Macro_Stairs.png|Macro Stairs|Macro Stairs}}: Create stair helix, create your stair nosing select and run the macro.
+
<!--T:357-->
* {{MacroLink|Icon=Gearworkbech.png|Macro FCGear|Macro FCGear}}: Additional Workbench to create different types of gears, involute gear, involute rack, cycloide gear, bevel gear.
+
* {{MacroLink|Icon=GenerateDrawing.svg|Macro_GenerateDrawing|Macro GenerateDrawing}}: Macro for automatic drawing generation with 3 normal projections and one isometric.
* {{MacroLink|Icon=Macro_Corner_shapes_wizard.png|Macro Corner shapes wizard|Macro Corner shapes wizard}}: pops up a dialog asking for the dimensions of your corner piece, then creates the object in the document and creates a page view with top, front and lateral views of the piece
+
 
* {{MacroLink|Icon=Macro_Corner_shapes_wizard.png|Macro_Corner_shapes_wizard/update|Macro Corner shapes wizard/update}}: pops up a dialog asking for the dimensions of your corner piece, then creates the object in the document and creates a page view with top, front and lateral views of the piece
+
<!--T:358-->
* {{MacroLink|Icon=PropertyMemo.png|Macro PropertyMemo|Macro PropertyMemo}}: This little macro create one Property additional (memo or other text) for you object (only Draft)
 
* {{MacroLink|Icon=Macro Fonts Win10 PYMP.png|Macro Fonts Win10 PYMP|Macro Fonts Win10 PYMP}}: This little macro is dedicate to users of Windows 10. The explorer fonts for use the ShapeString is empty and this little macro can help you see aesily the font to use.
 
* {{MacroLink|Icon=Macro_Rubik_Cube.png|Macro Rubik Cube|Macro Rubik Cube}}: Display a Rubik Cube and interactively do slice rotations.
 
* {{MacroLink|Icon=Macro_Megaminx.png|Macro Megaminx|Macro Megaminx}}: Display a Megaminx and interactively do slice rotations.
 
* {{MacroLink|Icon=ImportAirfoil.svg|Macro_ImportAirfoil|Macro ImportAirfoil}}: Airfoil coordinates import, then scale the airfoil, rotate, translate in the plane, translate along the span, select the plane and the main axis, and turn the geometry into a sketch.
 
 
* {{MacroLink|Icon=GenerateViews.svg|Macro_GenerateViews|Macro GenerateViews}}: Macro for automatic 2D views generation with 6 normal projections and one isometric.
 
* {{MacroLink|Icon=GenerateViews.svg|Macro_GenerateViews|Macro GenerateViews}}: Macro for automatic 2D views generation with 6 normal projections and one isometric.
* {{MacroLink|Icon=GenerateDrawing.svg|Macro_GenerateDrawing|Macro GenerateDrawing}}: Macro for automatic drawing generation with 3 normal projections and one isometric.
+
 
 +
<!--T:359-->
 +
* {{MacroLink|Icon=GW_Dim.png|Macro_Geneva_Wheel|Macro Geneva Wheel}}: Allows the user to create a Geneva wheel mechanism from scratch. Must edit values within the Macro to alter the size of the object.
 +
 
 +
<!--T:360-->
 +
* {{MacroLink|Icon=GW_Dim.png|Macro_Geneva_Wheel_GUI|Macro Geneva Wheel GUI}}: A GUI front end that allows the user to create a Geneva wheel mechanism from scratch.
 +
 
 +
<!--T:361-->
 +
* {{MacroLink|Icon=Macro_Half_turn_stairs.png|Macro_Half_turn_stairs|Macro Half turn stairs}}: Creates a half turn (left/right) stair from a Data-file.
 +
 
 +
<!--T:362-->
 +
* {{MacroLink|Icon=Macro_Half_Hull_Model.png|Macro_Half-Hull_Model|Macro Half-Hull Model}}: This macro generates both three dimensional [http://en.wikipedia.org/wiki/Half_hull_model_ship half-hull] and full-hull models from a series of 2D line drawings.
 +
 
 +
<!--T:363-->
 +
* {{MacroLink|Icon=Macro_Megaminx.png|Macro_Megaminx|Macro Megaminx}}: Display a Megaminx and interactively do slice rotations.
 +
 
 +
<!--T:364-->
 +
* {{MacroLink|Icon=PropertyMemo.png|Macro_PropertyMemo|Macro PropertyMemo}}: This little macro create one Property additional (memo or other text) for you object (only Draft).
 +
 
 +
<!--T:365-->
 +
* {{MacroLink|Icon=Macro_Rubik_Cube.png|Macro_Rubik_Cube|Macro Rubik Cube}}: Display a Rubik Cube and interactively do slice rotations.
 +
 
 +
<!--T:366-->
 +
* {{MacroLink|Icon=Macro_Sheet_Metal_Unfolder.png|Macro_Sheet_Metal_Unfolder|Macro Sheet Metal Unfolder}}: Creates an unfolded part from a sheet-metal-part.
 +
 
 +
<!--T:367-->
 +
* {{MacroLink|Icon=Macro_Stairs.png|Macro_Stairs|Macro Stairs}}: Create stair helix, create your stair nosing select and run the macro.
 +
 
 +
<!--T:368-->
 +
* {{MacroLink|Icon=Macro_Unfold_Box.png|Macro_Unfold_Box|Macro Unfold Box}}: Allows to unfold the surfaces of a box of any shape and to draw them on a page.
 +
 
 +
<!--T:369-->
 +
* {{MacroLink|Icon=Macro_Unroll_Ruled_Surface.png|Macro_Unroll_Ruled_Surface|Macro Unroll Ruled Surface}}: Allows to unroll ruled surfaces and to draw them on a page.
  
 
</translate>
 
</translate>
 
</div>
 
</div>
 
</div>
 
</div>
 
 
<div class="toccolours mw-collapsible mw-collapsed">
 
<div class="toccolours mw-collapsible mw-collapsed">
 
<translate>
 
<translate>
  
=== [[File:Std_FreeCADWebsite.svg|32px]] Woodworking === <!--T:168-->
+
=== [[File:Arch_Equipment.svg|32px]] Woodworking === <!--T:168-->
  
 
</translate>
 
</translate>
Line 515: Line 875:
 
<translate>
 
<translate>
  
<!--T:169-->
+
<!--T:370-->
* {{MacroLink|Icon=Macro_Cabinets32.png|Macro Cabinets32|Macro Cabinets32}}: Creates side and top/bottom walls for a cabinet with drilled holes for connection parts of manufacturer Hettich.
+
* [[Image:Text-x-python.png|24px]] [https://github.com/dprojects/getDimensions getDimensions]: FreeCAD macro to get chipboards dimensions to cut (BOM, cutlist).
 +
 
 +
<!--T:371-->
 +
* {{MacroLink|Icon=Macro_Cabinets32.png|Macro_Cabinets32|Macro Cabinets32}}: Creates side and top/bottom walls for a cabinet with drilled holes for connection parts of manufacturer Hettich.
 +
 
 +
<!--T:372-->
 
* {{MacroLink|Icon=Macro_Joint_Icon.svg|Macro_Joint|Macro Joint}}: Creates a variety of joints, such as mortise/tenon, box joints, dovetail joints, and snap joints.
 
* {{MacroLink|Icon=Macro_Joint_Icon.svg|Macro_Joint|Macro Joint}}: Creates a variety of joints, such as mortise/tenon, box joints, dovetail joints, and snap joints.
* [[Image:Text-x-python.png|24px]] [https://github.com/dprojects/getDimensions getDimensions]: FreeCAD macro to get chipboards dimensions to cut (BOM, cutlist).
 
* [[Image:Text-x-python.png|24px]] [https://github.com/dprojects/Woodworking/blob/master/Tools/makeTransparent.py makeTransparent]: allows to make all parts transparent and back to normal. You can preview all pilot holes, countersinks or any other joints like that.
 
  
 +
<!--T:373-->
 +
* [[Image:Text-x-python.png|24px]] [https://github.com/dprojects/Woodworking/blob/master/Tools/makeTransparent.py makeTransparent]: Switches all parts from non-transparent to transparent, and back, allowing you to preview pilot holes, countersinks and other joints.
  
 
</translate>
 
</translate>
 
</div>
 
</div>
 
</div>
 
</div>
 
 
<div class="toccolours mw-collapsible mw-collapsed">
 
<div class="toccolours mw-collapsible mw-collapsed">
 
<translate>
 
<translate>
Line 535: Line 899:
 
<translate>
 
<translate>
  
<!--T:134-->
+
<!--T:374-->
* [[Image:2364.png|24px]] [https://github.com/microelly2?tab=repositories By microelly2] : freeCAD_macro, geodata, Animation, freecad-nurbs, PieMenu, and more.
 
 
* [[Image:Text-x-python.png|24px]] [https://github.com/hamish2014?tab=repositories By hamish2014]: FreeCAD_assembly2, FreeCAD_drawing_dimensioning, and more.
 
* [[Image:Text-x-python.png|24px]] [https://github.com/hamish2014?tab=repositories By hamish2014]: FreeCAD_assembly2, FreeCAD_drawing_dimensioning, and more.
 +
 +
<!--T:375-->
 +
* [[Image:2364.png|24px]] [https://github.com/microelly2?tab=repositories By microelly2] : FreeCAD_macro, geodata, Animation, freecad-nurbs, PieMenu, and more.
 +
 +
<!--T:376-->
 +
* [[Image:Text-x-python.png|24px]] [https://github.com/oddtopus?tab=repositories By oddtopus]: Flamingo (workbench for metal structures).
 +
 +
<!--T:377-->
 +
* [[Image:Text-x-python.png|24px]] [https://github.com/realthunder/FreeCAD_assembly3#installation By realthunder]: Assembly3 Workbench, and more.
 +
 +
<!--T:378-->
 +
* [[Image:681.jpg|24px]] [https://github.com/j-wiedemann?tab=repositories By rockn]: FreeCAD-Timber, FreeCAD-addons, FreeCAD-library, FreeCAD-StructuresBois, and more.
 +
 +
<!--T:379-->
 +
* [[Image:Text-x-python.png|24px]] [https://github.com/Siardeni/FreeCADTools By Siardeni]: Workbench for create metal profiles, square tubing, z profile, palette, rotation, drawing, and more.
 +
 +
<!--T:380-->
 
* [[Image:Text-x-python.png|24px]] [https://github.com/triplus?tab=repositories By triplus]: IconThemes, ShortCuts, NavigationIndicator, TabBar, Launcher, PersistentToolbars, PieMenu, and more.
 
* [[Image:Text-x-python.png|24px]] [https://github.com/triplus?tab=repositories By triplus]: IconThemes, ShortCuts, NavigationIndicator, TabBar, Launcher, PersistentToolbars, PieMenu, and more.
* [[Image:681.jpg|24px]] [https://github.com/j-wiedemann?tab=repositories By rockn]: FreeCAD-Timber, FreeCAD-addons, FreeCAD-library, FreeCAD-StructuresBois, and more.
 
* [[Image:Text-x-python.png|24px]] [https://github.com/oddtopus?tab=repositories By oddtopus]: flamingo (workbench for metal structures).
 
* [[Image:Text-x-python.png|24px]] [https://github.com/Siardeni/FreeCADTools By Siardeni]: workbench for create metal profiles, square tubing, z profile, palette, rotation, drawing, and more.
 
* [[Image:Text-x-python.png|24px]] [https://github.com/realthunder/FreeCAD_assembly3#installation By realthunder]: Assembly3 workbench, and more.
 
  
 
</translate>
 
</translate>

Latest revision as of 16:35, 20 June 2022

Other languages:
Deutsch • ‎English • ‎español • ‎français • ‎italiano • ‎polski • ‎svenska • ‎čeština • ‎русский
Text-x-python.png Macros

This page lists macros that can add functionality to a FreeCAD installation.

If you have written a macro and want to include it in one of the categories on this page, then go to Macro documentation to learn more about properly documenting a macro.

Categories

Part CheckGeometry.svg 3D View operations

  • FCCamera 00.png Macro FCCamera: This macro can rotate the screen in a defined angle and the defined axis and creates a plan to face the screen to create a form in the specified plan positions the selected face facing the screen, to detect the position of the camera.
  • Macro Mouse Cross.png Macro Mouse Cross: This small macro turns the arrow of the mouse in a precision cross.
  • Text console python.png Macro Rotate View Free: This macro is used in the Python console and rotates the current view in the angle and plane given.
  • Macro Screen Wiki.png Macro Screen Wiki: This macro allows to save the 3D view in the desired format. The 3D view or the full 3D window of FreeCAD takes the desired dimensions.
  • Snip.png Macro Snip: Easily post screenshots to the FreeCAD forum.
  • Macro View Rotation.png Macro View Rotation: Provides a GUI to permit rotation of view by precise amounts in all three directions.
  • Zoom1 1.svg Macro Zoom 1:1: 1:1 Zoom so objects appear their actual size on the screen.

Draft FlipDimension.svg Animation

  • Animator.svg Macro Animator: Animate your model by animating its properties with this feature Python object.
  • Macro Constraint Draft.png Macro Constraint Draft: Simple example animation Draft wires by use the Expressions for associate many wires and simulate or verify the movement. Here the circle rotation create the movement for all objects connected (This macro run with FreeCAD version 0.16).

Applications-python.svg Code and scripting

  • Macro Build Utility.png Macro Build Utility: This macro provides a utility to assemble a project from sub-project files using the Merge Project facility.
  • Macro clone explicit.png Macro clone explicit: Creates a copy of each selected object and sets its properties to an expression linking to the original object, making it an explicit and editable clone.
  • Macro Python Assistant Window.png Macro Python Assistant Window: This macro provides a cut/copy/paste workspace for Python code, it is segmented so different sections can be selected and it is persistent between FreeCAD sessions.
  • MEPlan.png Qt Example: Example of using Qt commands, their connections, extraction and data assignment.
  • Text-x-python.png scanObjects: Inspection tool for FreeCAD macro development and project debug.

Arch MeshToShape.svg Conversion

  • Macro Compound Plus.png Macro Compound Plus: Draft command set in a small macro for the 2D sketch example: work with the DXF files.
  • Macro DeepCopy.png Macro DeepCopy: Make a compound out of a part with a copy of all its shapes.
  • Macro Dxf To Shape.png Macro Dxf To Shape: Macro utility for create unique wire with many wires, the type wire created is selected to MakeWire, Bspline, BsplineCurve, BsplineCurve + Arc, Polygon, Bezier curve.
  • FCBmpImportLogo.svg Macro FCBmpImport: Import Black and White BMP images into FreeCAD as sketch, wire, or solid or Grayscale BMP for lithophanes.
  • Macro FCWire To Volume.png Macro FCWire To Volume: This macro create boolean operation with the objects selected just select the wires give the thickness and click "Create".
  • Applications-python.svg Macro Iges PyImporter: Imports an iges file with entity 128, for example an iges-file from FreeShip, into FreeCAD.
  • MultiCopy-reduced.png Macro MultiCopy: MultiCopy allows the duplication (copy and paste) of multiple FreeCAD objects that can be labelled sequentially and in a custom manner.
  • PartToVRML.png Macro PartToVRML: Converts selected parts to VRML meshes for small size and faster loading (VRML models Kicad and Blender compatible).

Workbench Draft.svg Draft Workbench and 2D

  • Macro EdgesToArc.png Macro EdgesToArc: Converts the selected Edges to a circular Arc if possible. Useful for restoring discretized arcs.
  • Macro FCConvertLines.png Macro FC Convert Lines: This macro convert the object line, wire in line Dash, DashDot, DashDotDot, ZigZag and Hand with the dimensions given.
  • Macro Draft Circle 3 Points.png Macro Make Circle 3 Points: Creates a circle on 3 selected points, the points can be objects (this example brings together the two examples below, all parameters simply settle on a graphic window).

Drawing-orthoviews.svg Drawing Workbench

The Drawing Workbench is obsolete since FreeCAD 0.17. Consider using the TechDraw Workbench instead.

  • Macro Automatic drawing.png Macro Automatic drawing: Allows the user to get the view of his object in a drawing with 4 different position (front,top,iso,right). Needs some modification to be perfectly effective.
  • Macro CartoucheFC.png Macro CartoucheFC: This GUI macro to fill simply all fields of the cartridge of the plan implementation worksheet FreeCAD, the format of the date and the symbol of the projection mode adapt to the EU region or US selected.
  • Macro CartoucheFC 2.png Macro CartoucheFC 2: This GUI macro to fill simply all fields of the cartridge model 2 of the plan implementation worksheet FreeCAD.
  • Macro CartoucheFC Full.png Macro CartoucheFC Full: This GUI macro to fill simply all fields of the cartridge Misc templates Full of the plan implementation worksheet FreeCAD, the format of the date and the symbol of the projection mode adapt to the EU region or US selected.
  • Macro Normal Vector.png Macro Normal Vector: Get the normal vector of a preselected face for creating a drawing view normal to that face.

Workbench FEM.svg Fem Workbench

  • Text-x-python.png Macro export transient FEM results: This macro exports multiple FEM result objects from a transient analysis to the VTK format and generates a PVU file which can be used to load the results directly into ParaView for post-processing.
  • Macro GMSH.png Macro GMSH: Create FEM Meshes by GMSH Mesh Generator.

Std Windows.svg Gui

  • Macro MacroMenu.png Macro MacroMenu: Add the macros found in the macros folder to the Macros menu of FreeCAD.
  • Text-x-python.svg Macro SplitPropEditor: Temporarily split the property editor from the combo view to a separated dock widget.
  • Macro Toggle Views Visibility.png Macro Toggle Panels Visibility: This macro toggles the visibility of various supporting panels in FreeCAD, allowing the main window to be viewed with all available screen space.

Part Measure Linear.svg Info and measurements

  • CenterFace.png Macro CenterFace: This macro red trace (editable) the center face (mass) with 1 point and print the coordinates.
  • Macro CenterOfMass.png Macro CenterOfMass: Gives the total mass and the center of mass of multiple objects selected with the density chosen.
  • Macro Delta xyz.png Macro Delta xyz: Gives the Delta values and the distance between 2 points.
  • Macro Dump Objects.png Macro Dump Objects: This macro generates a listing of all objects in the current document - the list can be in a window or on the Report view.
  • Macro FC element selector.png Macro FC element selector: This macro display all elements below cursor same "Macro Mouse over cb" with GUI (elements covered by other elements will also be displayed).
  • FCInfo.png Macro FCInfo: Gives a series of information about the selected shape and can display a conversion of length, inclination (degrees, radian, grade) shape, surface, volume and the weight of the form in the density selected in various international and Anglo-Saxon units.
  • FCInfoToolBar.png Macro FCInfo ToolBar: Gives a series of information about the selected shape as FCInfo in a mini ToolBar.
  • Macro FCInfoGlass.png Macro FCInfoGlass: Gives a series of information about the selected shape and displayed in screen 3D.
  • FCInfoToMouse.png Macro FCInfoToMouse: Provides informations coordinates, length and angles in real time on the mouse in a bubble annotation displayed in the 3D screen.
  • Macro FCTreeView.png Macro FCTreeView: Macro for list all objects in the project in one list without hierarchy, options sort by name, label, visibility, group, by length option search by name, label... without case sensitive or with case sensitive and select all objects displayed in the macro window.
  • Macro Mouse over cb.png Macro Mouse over cb: This macro display all elements below cursor (elements covered by other elements will also be displayed).
  • Macro SimpleProperties.png Macro SimpleProperties: Display in a concise way basic physical properties of an object (volume, bound box dimensions, ...).

Draft VisGroup.svg Libraries

  • Macro BOLTS.png Macro BOLTS: The aim of BOLTS is to build a free and open-source standard parts library for CAD applications.

Bound-expression.svg Mathematical functions

Part Primitives.svg Object creation

  • AeroFoil.png Macro AeroFoil: AeroFoil creates airfoil curves and faces using pre-defined models, algebraic functions, and DAT or CSV Files.
  • Macro Circle.png Macro Circle: Create a circle or arc giving radius, diameter, circumference, area, startangle, endangle, arc, anglecenter, cord, arrow, center (point) on choice (same above without GUI).
  • Macro CirclePlus.png Macro CirclePlus: Create a circle or arc giving radius, diameter, circumference, area, startangle, endangle, arc, anglecenter, cord, arrow, center (point) on choice (same below but with GUI) plus create sector and face.
  • Macro Cut Circle.png Macro Cut Circle: Cut a circle or arc and create x arcs, giving the number of cut.
  • Macro Cut Line.png Macro Cut Line: Cut a line and create x points, giving the number of points, create line or not, create points or not, create bicolor or not on choice.
  • Hilbert curve icon.png Macro HilbertCurve: Creates an Hilbert curve wire in 2 or 3 dimensions with many iterations.
  • Macro Honeycomb.svg Macro Honeycomb: Creates a feature Python Honeycomb object compatible in and out of PartDesign.
  • ImportAirfoil.svg Macro ImportAirfoil: Airfoil coordinates import, then scale the airfoil, rotate, translate in the plane, translate along the span, select the plane and the main axis, and turn the geometry into a sketch.
  • Intersection Icon.svg Macro Intersection: Finds the intersection between 2 or 3 selected edges/faces, works with Datum Planes and Datum Lines also. Creates a parametric feature Python object containing the shape of the intersection.
  • Macro Line Length.png Macro Line Length: Create a line giving coordinate XYZ length and angle to plane X Y.
  • Dodecahedron.svg Macro Polyhedrons: This macro creates parametric polyhedrons (dodecahedron, icosahedron, tetrahedron, ...). Customizable via radius or side.
  • Pyramidicon.svg Macro Pyramid: This macro creates a parametric pyramid. All parameters are customizable just like with Part Cone.
  • Macro ReproWire.png Macro Repro Wire: This macro reproduces all element selected subobject wire or face.
  • Macro Solid Sweep.png Macro Solid Sweep: Creates a solid by sweeping a 2D profile along a trajectory previously selected in the 3D view. The 2D elements can be created through the regular tools in FreeCAD's GUI.
  • Macro Triangle AH.png Macro Triangle AH: This macro creates a triangle by giving the head angle and the height of the triangle (the head of the triangle is positioned to the xyz coordinates 0.0).
  • Macro WireXYZ.png Macro WireXYZ: This macro creates a Wire with the coordinates extracted from a file. The coordinates X Y Z are separated by a space.

Std TransformManip.svg Object transformation

  • Macro Align Object to View.png Macro Align Object to View: This macro align the selected object to the current View and set the coordinates Placement of the camera.
  • Macro ArrayCopy.png Macro ArrayCopy: Copies the selected object several times, on an array grid.
  • Bevel.svg Macro Bevel: Bevels selected vertices, creates parametric feature Python object, compatible with all solids (except with round edges) including features in Part Design bodies.
  • Macro Center Align Objects with Faces or Edges.png Macro Center Align Objects with Faces or Edges: This macro covers the following constraints: Concentric constraint among non cylindrical parts; and Constraint on center Faces and/or Edges. It works also with the new Body and App::Part containers, as well as with STEP hierarchy.
  • Macro CloneConvert.png Macro CloneConvert: Creates a clone of the object and the converted in the chosen position and size (inch, mm, m, µm...). The base object is recognized in mm (FreeCAd base).
  • Macro Connect And Sweep.png Macro Connect And Sweep: This macro easily creates a connection between two objects, an object and a point or between two points or the selected line, wire, edge (the center of the objects are the starting and ending points of the sweep) can be selected form a configurable ellipse polygon circle.
  • Macro FlattenWire.png Macro FlattenWire: Flattens draft wires that are not planar to their median Z coordinate.
  • Macro HealArcs.png Macro HealArcs: Sometimes arcs are transformed into BSplines, for example when scale operations have been applied to them. This macro recreates valid arcs from them. Useful before exporting to dxf.
  • Image Scaling.svg Macro Image Scaling: Macro for easy scaling drawings, graphics, diagram, blueprint and similar 2D images in Image workbench.
  • Macro JointWire.png Macro JointWire: Allows to find and joint all non connected edge to the closest non connected one using a line.
  • Macro MatrixTransform.png Macro MatrixTransform: Apply linear space transformations to distort shapes. E.g., non-uniform scaling, shearing, mirroring, axes swapping.
  • Centericon.png Macro Move to Origin: This macro translates the Placement of an object so that a selected location becomes its new origin.
  • Macro Rotate To Point.png Macro Rotate To Point: Macro to rotate an object around the center of its boundbox, its center of mass, or the last clicked point.
  • Part Section.png Macro Section: Alternative implementation of Part Section tool, more suitable for making sweep paths (parametric).
  • Macro SuperWire.png Macro SuperWire: Forces the creation of a Wire from lines and arcs that don't necessarily touch each other. Use this if normal wire operation fails.
  • Wirefilter.svg Macro WireFilter: Filter wires from a sketch to only use certain ones, also 2D offsets, scales, rearranges wire order.

Part FaceColors.svg Object visibility, view properties and textures

  • Text-x-python.png colorManager: Allows to set face colors for all objects from a spreadsheet. Also you can browse colors for a manually selected face or object and see the effect in the 3D model in real-time.
  • Workbench Image.svg Macro Colorize: Easily set colors of faces, edges, and vertices, including individual transparency levels.
  • FCTexture.png Macro Texture: Create a project from a bmp image to create a texture easily.
  • Macro Texture Objects.png Macro Texture Objects: This macro allows you to temporarily put a texture image on the selected objects.
  • Macro Toggle Drawstyle Optimized.png Macro Toggle Drawstyle Optimized: This macro toggles the Drawstyle of the selected object (same as Macro Toggle Drawstyle above but optimized for all languages).
  • Macro SelectVisible.png Macro Toggle Visibility: Set of three macro, macro 1: hidden the objects not selected, macro 2: displayed alls objects, macro 3: hidden alls objects.
  • Macro SelectVisible2.png Macro Toggle Visibility2 1-2: Set of two macro, macro 1:Macro_Toggle_Visibility2_1-2 hidden the objects not selected, macro 2:Macro_Toggle_Visibility2_2-2 displayed alls objects, macro with the original visibility.
  • Macro VisibleAlls2.png Macro Toggle Visibility2 2-2: Set of two macro, macro 1:Macro_Toggle_Visibility2_1-2 hidden the objects not selected, macro 2:Macro_Toggle_Visibility2_2-2 displayed alls objects, macro with the original visibility.
  • Text-x-python.png setTextures: Allows to permanently store the URL of textures in a FreeCAD project and load stored textures.

Workbench PartDesign.svg PartDesign Workbench

  • Workbench PartDesign.svg Macro PDWrapper: Encapsulates non-PartDesign solids for use in PartDesign Bodies, and more.

View.svg Printer 3D

  • Macro 3d Printer Slicer Individual Parts.svg Macro 3d Printer Slicer Individual Parts: This code, when run, will export the visible bodies at the top level (bodies deeper in the tree will be ignored) of the currently open design to individual STL files, and open them it in the slicing software that you use. This macro will look for Cura as the default but you can change it to any other slicer by changing the SLICERAPP variable in the source code.

Preferences-raytracing.svg Raytracing

Spreadsheet.svg Spreadsheet Workbench

  • Aliasmanager icon.png Macro Alias Manager: Helps managing aliases inside FreeCAD Spreadsheet workbench. It is able to create, delete, move aliases and create a 'part family' group of files.
  • Easy-alias-icon.png Macro EasyAlias: Quickly create aliases in FreeCAD Spreadsheet workbench. It uses the labels from one column to create aliases for adjacent cells in the next column to the right, e.g. labels from Column A become aliases for the cells in Column B.
  • Applications-python.svg Macro Spreadsheet2html: Exports a spreadsheet as styled html. Intended as support in transfering data to office suits.
  • Text-x-python.png sheet2export: Allows to export FreeCAD spreadsheet to file formats (.md, .html, .csv, .json).

Arch Survey.svg Utility

  • Macro Duplicate Selection.png Macro Duplicate Selection: This macro testing if one selection are duplicate, select the object IN THE 3D VIEW the "ForbiddenCursor" stay if the or one selection is duplicate, the macro stay resident.
  • Macro ExpandTreeItem.png Macro ExpandTreeItem: This macro expand selected items in the tree view. If not selection all item are expand/collapse.
  • Macro findConfigFiles.png Macro findConfigFiles: Finds user config files system.cfg and user.cfg, copies folder location to system clipboard, instructs user on renaming these files in order to reset FreeCAD settings, and opens folder with default file browser.
  • Text-x-python.svg Macro ImperialScales: Shows a list of US Imperial Arch scales list with the corresponding factor to apply to TechDraw pages or views.
  • SketchUnmap.svg Macro SketchUnmap: Unmap a sketch from its current support and makes its placement absolute, eventually creating a locating datum plane.
  • Text-x-python.svg Macro TreeToAscii: Prints model tree as "ASCII art" with custom pattern & style, and export to clipboard, file or embedded document.
  • Macro Unbind Numpad Shortcuts.png Macro Unbind Numpad Shortcuts: Rebinds standard view commands from digit keys to Ctrl+digit, so that they don't spin the view by accident when entering numbers.
  • WF wf.png Macro WorkFeatures: Tool utility to create points, axes, planes and many other useful features to facilitate the creation of your project.

Bulb.svg Wizards

  • Macro Corner shapes wizard.png Macro Corner shapes wizard/update: Pops up a dialog asking for the dimensions of your corner piece, then creates the object in the document and creates a page view with top, front and lateral views of the piece.
  • Gearworkbech.png Macro FCGear: Additional Workbench to create different types of gears, involute gear, involute rack, cycloide gear, bevel gear.
  • Macro Fonts Win10 PYMP.png Macro Fonts Win10 PYMP: This little macro is dedicate to users of Windows 10. The explorer fonts for use the ShapeString is empty and this little macro can help you see easily the font to use.
  • GenerateDrawing.svg Macro GenerateDrawing: Macro for automatic drawing generation with 3 normal projections and one isometric.
  • GenerateViews.svg Macro GenerateViews: Macro for automatic 2D views generation with 6 normal projections and one isometric.
  • GW Dim.png Macro Geneva Wheel: Allows the user to create a Geneva wheel mechanism from scratch. Must edit values within the Macro to alter the size of the object.
  • GW Dim.png Macro Geneva Wheel GUI: A GUI front end that allows the user to create a Geneva wheel mechanism from scratch.
  • Macro Megaminx.png Macro Megaminx: Display a Megaminx and interactively do slice rotations.
  • PropertyMemo.png Macro PropertyMemo: This little macro create one Property additional (memo or other text) for you object (only Draft).
  • Macro Stairs.png Macro Stairs: Create stair helix, create your stair nosing select and run the macro.
  • Macro Unfold Box.png Macro Unfold Box: Allows to unfold the surfaces of a box of any shape and to draw them on a page.

Arch Equipment.svg Woodworking

  • Text-x-python.png getDimensions: FreeCAD macro to get chipboards dimensions to cut (BOM, cutlist).
  • Macro Cabinets32.png Macro Cabinets32: Creates side and top/bottom walls for a cabinet with drilled holes for connection parts of manufacturer Hettich.
  • Macro Joint Icon.svg Macro Joint: Creates a variety of joints, such as mortise/tenon, box joints, dovetail joints, and snap joints.
  • Text-x-python.png makeTransparent: Switches all parts from non-transparent to transparent, and back, allowing you to preview pilot holes, countersinks and other joints.

Std FreeCADWebsite.svg Other interesting macros created by FreeCAD users

  • Text-x-python.png By hamish2014: FreeCAD_assembly2, FreeCAD_drawing_dimensioning, and more.
  • 2364.png By microelly2 : FreeCAD_macro, geodata, Animation, freecad-nurbs, PieMenu, and more.
  • Text-x-python.png By oddtopus: Flamingo (workbench for metal structures).
  • 681.jpg By rockn: FreeCAD-Timber, FreeCAD-addons, FreeCAD-library, FreeCAD-StructuresBois, and more.
  • Text-x-python.png By Siardeni: Workbench for create metal profiles, square tubing, z profile, palette, rotation, drawing, and more.
  • Text-x-python.png By triplus: IconThemes, ShortCuts, NavigationIndicator, TabBar, Launcher, PersistentToolbars, PieMenu, and more.

Usage

See how to install macros for a full description, and customize toolbars to add the macros to a toolbar for easy access.

Installing many macros is equivalent to installing a new workbench; see how to install additional workbenches for this information.

Automatic installation

Use the Addon Manager in Tools → Addon manager to install a macro that has been included in the FreeCAD-macros repository. introduced in version 0.17

Manual installation

If the Addon Manager is not used, the macro can be installed manually.

  • Copy the Python code from the corresponding macro page.
  • Open the macros menu Macro → Macros, press Create, and give it a name.
  • Paste the Python code that you copied.
  • Press the Save button, and restart FreeCAD.
  • To use it, open again the macros menu, select your new macro, and press Execute.

Add a macro to a custom toolbar

  • Go to Tools → Customize.
  • In the Macros tab, add a new macro name, and optionally define an icon and a keyboard shortcut.
  • In the Toolbars tab, create a new toolbar, and add your macro, taking it from the Macros category.