Makro Tvorba šroubu1 2
File:Text-x-python Macro_screw_maker1_2 |
Popis |
---|
Vytváří šroub, čep... s nebo bez závitu Version macro : 01.00 Date last modification : 2013-08-03 Autor: Ulrich Brammer |
Autor |
Ulrich Brammer |
Download |
None |
Odkazy |
Makro recepty| Jak nainstalovat makra Jak přizpůsobit panely nástrojů |
Verze |
01.00 |
Datum poslední úpravy |
2013-08-03 |
Verze FreeCAD |
None |
Výchozí zástupce |
None |
Viz též |
None |
Toto makro vytváří šroub s nebo bez závitu podle ISO standardů.
Použití
Zadejte charakteristiky šroubu a klikněte na tlačítko pro vytvoření.
Jestliže vyberete otvor nebo vnitřní povrch kruhové díry a zároveň kružnici na poprchu této díry, šroub bude po vytvoření umístěn do tohoto otvoru.
-
Okno tvorby šroubu a několik typů šroubů.
-
Šroub se závitem
The creation of the thread takes a long time. Be patient and have a look at the CPU-usage. The latest version of Screw maker is 1.7. The wiki does not allow to upload a zip-File and copying the text from this page is not convenient. So here is a link to a forum post with the latest version: http://forum.freecadweb.org/viewtopic.php?f=22&t=6558#p52887
Code
The lastest version of the macro is to be found at ScrewMaker.FCMacro but the easiest way to install this macro is through the Addon Manager.
Link
The forum Screw Maker