Macro Rotate To Point
|
|
| Description |
|---|
| La version mise à jour de la macro a modifié l'interface graphique pour améliorer la prise en charge HiDPI (QGridLayout). Exécutez uniquement FC v0.18 ou supérieur (prenant en charge Qt5 et PySide2) Macro pour faire tourner un objet sur lui-même sur un axe de rotation: centre de la boîte, centre de masse, direction du fil ou dernier point cliqué. Vous pouvez sauvegarder les coordonnées travaillées dans un fichier coordonnées [(0.06,1.30,0.0),(85.0,0.0,0.0)] ou dans une macro complète pour créer une animation. Pour la version précédente (Qt4), voir Macro_Rotate_To_Point Macro_Rotate_To_Point et installez la manuellement. Version macro : 00.10 Date dernière modification : 2021/03/08 Version FreeCAD : 0.19 Téléchargement : ToolBar Icon Auteur: Mario52 |
| Auteur |
| Mario52 |
| Téléchargement |
| ToolBar Icon |
| Liens |
| Page des macros Comment installer une macro Comment créer une barre d'outils |
| Version Macro |
| 00.10 |
| Dernière modification |
| 2021/03/08 |
| Version(s) FreeCAD |
| 0.19 |
| Raccourci clavier |
| None |
| Voir aussi |
| None |
Description
Macro pour faire pivoter un objet sur lui-même, l'axe de rotation étant soit:
- centre de la boîte
- centre de masse
- direction du fil
- dernier point cliqué
Utilisation
- Téléchargez la macro depuis le gestionnaire d'Addon
- Exécuter la macro
- Sélectionnez un objet
- Choisissez l'une des orientations suivantes:
Point de rotation
- Boundbox Center: Sélectionnez la rotation du centre BoundBox à l'axe
- Center of Mass: sélectionnez la rotation du centre de masse à l'axe
- Point Clicked: Sélectionnez le dernier clic de souris comme point de rotation de l'axe
- 1: sélectionnez l'objet
- 2: utilisez la touche CTRL pour choisir un objet supplémentaire
Axe de rotation
- Rotation(Z) Yaw: axe de lacet
- Rotation(Y) Pitch: axe de tanguage
- Rotation(X) Roll: axe de roulis
- Rotation(D) Direction: rotation autour de la ligne, bord sélectionné
Coordonnées du point cliqué
- DoubleSpinBox: Coordinate X au clic de la souris (modifiable uniquement avec le mode "Point Clicked")
- DoubleSpinBox: Coordinate Y au clic de la souris (modifiable uniquement avec le mode "Point Clicked")
- DoubleSpinBox: Coordinate Z au clic de souris (modifiable uniquement avec le mode "Point Clicked")
Work
Translation: Si cette case à cocher est 
cochée, la rotation est désactivée, le placement de l'objet se fait sur l'axe sélectionné.- Point: Si cette case à cocher est cochée, un point est créé pour visualiser l'axe de rotation des points: rouge X, vert Y, bleu Z
- Line Edit: L'édition de ligne affiche les coordonnées d'origine de l'axe sélectionné + les données d'entrée données dans la spinBox
- 0,0000
: entrez la modification (la valeur est réinitialisée après chaque sélection) - Apply: Applique la modification à l'objet
- Les coordonnées sont affichées
Data
- Fenêtre d'affichage des coordonnées mémorisées
- Save: Sauve les données dans un fichier
- Clear: Delete and clean the text editor
- Delete: Efface la ligne sélectionnée
- Memorize: Mémorise et affiche les coordonnées
- Macro:
- Mode normal Macro Les données sont sauvegardées dans ce mode : [(0.06,1.30,0.0),(85.0,0.0,0.0)],
- Mode macro 0,0 Coordinate Les coordonnées sont sauvées dans une macro complète (un ou plusieurs objet(s)) directement dans votre répertoire de macros avec le même nom que le document et l'extension .FCMacro
- Options de la macro
- __pompe____engrenage__ : Nom du document
- __22 Coordinates__ : nombre de coordonnées
- Type Key Q to Quit : Quitte la macro
- Type Key D to Decrease speed : Décrémente la vitesse de l'animation
- Type Key I to Increase speed : Incémente la vitesse de l'animation
- Type Key P to Pause/Continue or key RETURN or ESCAPE : Pause / Animation
- Type Key S to Step by Step (key RETURN or ESCAPE to continue) : Pas à pas (Step by Step)
- Type Key R to reverse
- Type Key M for this message : Affiche ce memo
- ____________________________
- Mode normal
- Memo on Click:
- Mode normal Memo on Click : Les données ne sont pas sauvées dans la fenêtre de mémorisation, vous devez sauver les coordonnées avec le bouton Memo (2) (Le compteur affiche le nombre de coordonnées sauvées)
- Mode Memo on Click Memo on Demand : Les données sont automatiquement sauvées a chaque clic sur le bouton Apply
- Mode normal
Command
- Quit: quitter la macro
- Original: Après avoir modifié les données de l'objet, vous pouvez revenir à l'emplacement d'origine, si vous n'avez pas désélectionné l'objet actuel.
- 0,0,0: cette option place l'objet en coordonnées de base
0,0,0 - Reset: Réinitialisez les données dans la macro et désélectionnez l'objet actuel (même clic de souris dans la vue 3D)
Script
ToolBar Icon PNG 
SVG 
Macro_Rotate_To_Point.FCMacro
# -*- coding: utf-8 -*-
from __future__ import unicode_literals
"""
***************************************************************************
* Copyright (c) 2017 2018 2019 2020 2021 <mario52> *
* *
* This file is a supplement to the FreeCAD CAx development system. *
* *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU Lesser General Public License (LGPL) *
* as published by the Free Software Foundation; either version 2 of *
* the License, or (at your option) any later version. *
* for detail see the LICENCE text file. *
** **
* Use at your own risk. The author assumes no liability for data loss. *
* It is advised to backup your data frequently. *
* If you do not trust the software do not use it. *
** **
* *
* This software is distributed in the hope that it will be useful, *
* but WITHOUT ANY WARRANTY; without even the implied warranty of *
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
* GNU Library General Public License for more details. *
* *
* You should have received a copy of the GNU Library General Public *
* License along with this macro; if not, write to the Free Software *
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 *
* USA *
***************************************************************************
* WARNING! All changes in this file will be lost and *
* may cause malfunction of the program *
***************************************************************************
"""
#
#
#OS: Windows 10 (10.0)
#Word size of OS: 64-bit
#Word size of FreeCAD: 64-bit
#Version: 0.19.24219 (Git)
#Build type: Release
#Branch: master
#Hash: 8c26baebab320b8c1c3279bc8eb34a1eb6c7a363
#Python version: 3.6.8
#Qt version: 5.12.1
#Coin version: 4.0.0a
#OCC version: 7.3.0
#Locale: French/Mars (fr_Ma)
#
#
__title__ = "Rotate_To_Point"
__author__ = "Mario52"
__url__ = "https://www.freecadweb.org/"
__Wiki__ = "https://www.freecadweb.org/wiki/Macro_Rotate_To_Point"
__version__ = "00.10"
__date__ = "2021/03/08" #YYYY/MM/DD
#
#
import PySide2
from PySide2 import (QtWidgets, QtCore, QtGui)
from PySide2.QtWidgets import *
from PySide2.QtCore import *
from PySide2.QtGui import *
from PySide2.QtWidgets import QComboBox
#from PySide2.QtWidgets import (QWidget, QApplication, QSlider, QGraphicsView, QGraphicsScene, QVBoxLayout, QStyle, QListWidget)
#from PySide2.QtCore import QDate
#from PySide2.QtGui import (QPainter, QColor, QIcon, QBrush, QPalette)
from PySide2.QtSvg import *
import unicodedata
import re
import operator
from operator import itemgetter, attrgetter, methodcaller # pour sort
import Draft, Part, PartGui, FreeCADGui, FreeCAD
from FreeCAD import Base
import DraftVecUtils
import time, os
Gui = FreeCADGui
App = FreeCAD
global ui ; ui = ""
global sourisPass ; sourisPass = 0
global positionMouse ; positionMouse = ""
global selM ; selM = ""
global originalObject; originalObject = ""
global myObject ; myObject = ""
global myObjectName ; myObjectName = ""
global originalPlacement; originalPlacement = ""
global valeur ; valeur = 0.0
global axisX ; axisX = 0.0
global axisY ; axisY = 0.0
global axisZ ; axisZ = 0.0
global posX ; posX = 0.0
global posY ; posY = 0.0
global posZ ; posZ = 0.0
global rotAngleX ; rotAngleX = 0.0
global rotAngleY ; rotAngleY = 0.0
global rotAngleZ ; rotAngleZ = 0.0
global saveOnDisk ; saveOnDisk = []
global saveListView ; saveListView = ""
global memorySelected; memorySelected = []
global countMemory ; countMemory = 0
global duplicate_Memory ;duplicate_Memory = []
global duplicate_View; duplicate_View = []
global s ; s = ""
##path###########################################################################
global path, path2 #
#path = FreeCAD.ConfigGet("AppHomePath") # path FreeCAD installation
#path = FreeCAD.ConfigGet("UserAppData") # path FreeCAD User data
#path = "your path" # your directory path
param = FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macro")# macro path
path = param.GetString("MacroPath","") + "/" # macro path
path = path.replace("\\","/") # convert the "\" to "/"
#print( "Path for the icons : " , path ) #
#################################################################################
global pathFile
#### Configuration begin ##############################################################
pathFile = FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macros/FCMmacros/" + __title__ ).GetString("setLastPath")
if pathFile == "":
pathFile = path
FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macros/FCMmacros/" + __title__).SetString("setLastPath",pathFile)
####
FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macros/FCMmacros/" + __title__).SetString("Version",__version__ + " (" + __date__ + ")")
global switchZoomOnCilck
switchZoomOnCilck = FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macros/FCMmacros/" + __title__).GetBool("switchZoomOnCilck")
if switchZoomOnCilck == 0:
FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macros/FCMmacros/" + __title__).SetBool("switchZoomOnCilck", switchZoomOnCilck)
#### Configuration end ##############################################################
#### wiki help page ####
import WebGui
#def on_PB_Help(self): #
# WebGui.openBrowser("http://www.freecadweb.org/wiki/index.php?title=xxxx")
# App.Console.PrintMessage("http://www.freecadweb.org/wiki/index.php?title=xxxx" + "\n")
#### wiki help page ####
global switchVersionMacroSearch#; switchVersionMacroSearch = False
try:
def versionSearch():
import urllib
import requests
contentPage = requests.get("https://wiki.freecadweb.org/Macro_" + __title__).text
for i in contentPage.split("\n"): # list page to line
if "ctEven macro-version" in i:
versionDetect = (i.split(">")[1])
if "ctEven macro-date" in i:
dateDetect = (i.split(">")[1])
try:
if (len(versionDetect) != 0) and (len(dateDetect) != 0):
break
except Exception:
None
try:
if (versionDetect == __version__) and (dateDetect == __date__):
None
else:
msg = ("New version availlable : " + "\n" +
str(versionDetect) + ":" + str(dateDetect) + "\n" +
"You can install with AddonManager")
FreeCAD.Console.PrintMessage("your actual version : " + str(__version__) + " : " + str(__date__) + "\n")
FreeCAD.Console.PrintMessage("new version availlable : " + str(versionDetect) + " : " + str(dateDetect) + "\n")
diag = QtWidgets.QMessageBox(QtWidgets.QMessageBox.Information, 'New Version', msg)
diag.setWindowModality(QtCore.Qt.ApplicationModal)
diag.exec_()
except Exception:
None
return versionDetect, dateDetect
# switchVersionMacroSearch = FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macros/FCMmacros/" + __title__).GetBool("switchVersionMacroSearch")
# if switchVersionMacroSearch == 0:
# FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macros/FCMmacros/" + __title__).SetBool("switchVersionMacroSearch", switchVersionMacroSearch)
# if switchVersionMacroSearch == True:
# versionSearch()
except Exception:
FreeCAD.Console.PrintMessage("Failed to establish a connection" + "\n")
#### Detect version macro ###########################################
switchVersionMacroSearch = FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macros/FCMmacros/" + __title__).GetBool("switchVersionMacroSearch")
if switchVersionMacroSearch == 0:
FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macros/FCMmacros/" + __title__).SetBool("switchVersionMacroSearch", switchVersionMacroSearch)
if switchVersionMacroSearch == True:
versionSearch()
#### Detect version macro ###########################################
Quit_Icon = [
"24 24 3 1",
" c None",
". c #FFFFFF",
"+ c #CC0000",
" .... ",
"++++++++++....++++++++++",
"+.......++....++.......+",
"+.......++....++.......+",
"+.......++....++.......+",
"+...++++++....++++++...+",
"+...++++++....++++++...+",
"+...+++++......+++++...+",
"+...+++++......+++++...+",
"+...+++++......+++++...+",
"+...+++++......+++++...+",
"+...+++++......+++++...+",
"+...+++++......+++++...+",
"+...++++++++++++++++...+",
"+...++++++++++++++++...+",
"+...++++++++++++++++...+",
"+...++++++++++++++++...+",
"+...++++++++++++++++...+",
"+...++++++++++++++++...+",
"+...++++++++++++++++...+",
"+......................+",
"+......................+",
"+......................+",
"++++++++++++++++++++++++"
]
boundBox_Center_Icon = [
"24 24 8 1",
" c None",
". c #284871",
"+ c #234C86",
"@ c #314B64",
"# c #EF2929",
"$ c #4A74A4",
"% c #4478AD",
"& c #4E9A06",
" ",
" # ",
" # ",
" # ",
" &&&&&# ",
" & #&&&&&&& ",
" & +#.. && ",
" &&&&&+%#%%. & & ",
" & ++&&&&&&& & ",
" & +$$$$$$&+@ & ",
" & +%$$$$$$&+@ & ",
"####&###$$$$$+&+####### ",
" & +%$$$$++&+@ & ",
" & +%$$$+++&+@ & ",
" & +$$++++&@ & ",
" & ++++++&@ & ",
" & @@@@@& & ",
" & # & & ",
" &&&&& # &&& ",
" &&&&&& ",
" # ",
" # ",
" # ",
" "
]
centerMass_Icon = [
"24 24 9 1",
" c None",
". c #000100",
"+ c #CD0000",
"@ c #6B6014",
"# c #B0A22C",
"$ c #D5B716",
"% c #E9D235",
"& c #F7E66C",
"* c #FBF4BC",
" ",
" ",
" ",
" ",
" ...... ",
" ..#%%%%#.. ",
" .@&&&%%%%%@. ",
" .@&**&%%%%%%@. ",
" .&***&%%%%%%%. ",
" .#&**&%%+%%%%%#. ",
" .%&&&%%++%%%$$%. ",
" .%%%%+++++$$$$$. ",
" .%%%%%+++++$$$$. ",
" .%%%%$$++$$$$$$. ",
" .#%$$$$+$$$$$$#. ",
" .%$$$$$$$$$$%. ",
" .@%$$$$$$$$$@. ",
" .@%$$$$$$%@. ",
" ..#$$$$#.. ",
" ...... ",
" ",
" ",
" ",
" "
]
point_Clicked_Icon = [
"24 24 7 1",
" c None",
". c #730000",
"+ c #9F0000",
"@ c #E90000",
"# c #C39F03",
"$ c #ECD309",
"% c #FBE851",
" ",
" ##### ",
" #%%%%%# ",
" #%%%%%%$# ",
" #%%%%%$$$$# ",
" #%%%%$$$$$# ",
" #%%%+.$$$$# ",
" #%%%++.$$$# ",
" #%%+@+.$# ",
" #%%+@@+.# ",
" ##+@@@+. ",
" +@@@@+. ",
" +@@@@@+. ",
" +@@@@@@+. ",
" +@@@@@@@.. ",
" +@@@@@@@@.. ",
" +@@@@@@@@@.. ",
" +@@@@@@+.... ",
" +@@@@@+ ",
" +@@++@@. ",
" +@+. .@@. ",
" ++. .@. ",
" .+.. ",
" .. "
]
axis_X_Icon = [
"24 24 6 1",
" c None",
". c #000000",
"+ c #A40000",
"@ c #EE2A2A",
"# c #729FCF",
"$ c #B9BCB5",
" $$ $$$$ ",
" $$$$ $ $ ",
" $$$$$$ $ ",
" $$$$$$ $ ",
" $$$$$$$$ $$$ ",
" $$$$ ",
" $$$$ ",
" $$$$ ",
" $$$$ ",
" $$$$ $$ $$",
" $$##$$ $$ $$",
" . . $####$ $$$ ",
" ... +####$ $$ ",
" .. +@####$$ $ ",
" . ... +@@@+$$$$$ $$ ",
" +@@@+ $$$$$ ",
" +@@@+ $$$$$ ",
" +++@@@+ $$$$$$$ ",
" +@@@@+ $$$$$$ ",
" +@@@+ $$$$$ ",
" +++++ $$$$$ ",
" ",
" ",
" "
]
axis_Y_Icon = [
"24 24 7 1",
" c None",
". c #030303",
"+ c #4E9A06",
"@ c #729FCF",
"# c #B9BCB5",
"$ c #BABDB6",
"% c #8AE134",
" $$ #### ",
" $$$$ # # ",
" $$$$$$ # ",
" $$$$$$ # ",
" $$$$$$$$ ### ",
" $$$$ ",
" $$$$ ",
" $$$$ ",
" $$$$ ",
" $$$$ .. ..",
" $$@@$$ .. ..",
" # # $@@@@$ ... ",
" ### $@@@@+ .. ",
" ## $$@@@@%+ . ",
" # ### $$$$$+%%%+ .. ",
" $$$$$ +%%%+ ",
" $$$$$ +%%%+ ",
" $$$$$$$ +%%%+++ ",
" $$$$$$ +%%%%+ ",
" $$$$$ +%%%+ ",
" $$$$$ +++++ ",
" ",
" ",
" "
]
axis_Z_Icon = [
"24 24 6 1",
" c None",
". c #000000",
"+ c #204A87",
"@ c #1D89B6",
"# c #729FCF",
"$ c #B9BCB5",
" ++ ... ",
" +@@+ . ",
" +@@@@+ . ",
" +@@@@+ . ",
" +++@@+++ ... ",
" +@@+ ",
" +@@+ ",
" +@@+ ",
" +@@+ ",
" +@@+ $$ $$",
" ++##++ $$ $$",
" $ $ +####+ $$$ ",
" $$$ $####$ $$ ",
" $$ $$####$$ $ ",
" $ $$$ $$$$$$$$$$ $$ ",
" $$$$$ $$$$$ ",
" $$$$$ $$$$$ ",
" $$$$$$$ $$$$$$$ ",
" $$$$$$ $$$$$$ ",
" $$$$$ $$$$$ ",
" $$$$$ $$$$$ ",
" ",
" ",
" "
]
direction_Icon = [
"24 24 6 1",
" c None",
". c #000000",
"+ c #A40000",
"@ c #EE2A2A",
"# c #565854",
"$ c #729FCF",
" ",
" ",
" +++++ ",
" +@@+ ",
" +@@@+ ",
" +@@@++ ",
" +@@@+ + ",
" +@@@+ ",
" +@@@+ ",
" +@@@+ ",
" +@@@+ ",
" +@@@+ ",
" +@@@+ ",
" +@@@+ ",
" +@@@+ ",
" +@@@+ ",
" + +@@@+ ",
" ++@@@+ ",
" +@@@+ ",
" +@@+ ",
" +++++ ",
" ",
" ",
" "
]
point_Icon = [
"24 24 8 1",
" c None",
". c #000100",
"+ c #B0A22C",
"@ c #E9D235",
"# c #6B6014",
"$ c #F7E66C",
"% c #FBF4BC",
"& c #D5B716",
" ",
" ",
" ",
" ",
" ...... ",
" ..+@@@@+.. ",
" .#$$$@@@@@#. ",
" .#$%%$@@@@@@#. ",
" .$%%%$@@@@@@@. ",
" .+$%%$@@@@@@@@+. ",
" .@$$$@@@@@&&&&&. ",
" .@@@@@@@&&&&&&&. ",
" .@@@@@&&&&&&&&&. ",
" .@@@@&&&&&&&&&&. ",
" .+@@&&&&&&&&&&+. ",
" .@&&&&&&&&&&&. ",
" .#&&&&&&&&&&#. ",
" .#&&&&&&&&#. ",
" ..+&&&&+.. ",
" ...... ",
" ",
" ",
" ",
" "
]
apply_Icon = [
"24 24 3 1",
" c None",
". c #4E9A06",
"+ c #FFFFFF",
" ",
" ",
" ",
" . ",
" .+. ",
" .+.+. ",
" .+...+. ",
" .+.....+. ",
" . .+.......+.",
" .+. .+.......+. ",
" .+.+. .+.......+. ",
" .+...+. .+.......+. ",
" .+.....+.+.......+. ",
".+.......+.......+. ",
" .+.............+. ",
" .+...........+. ",
" .+.........+. ",
" .+.......+. ",
" .+.....+. ",
" .+...+. ",
" .+.+. ",
" .+. ",
" . ",
" "
]
quit_Icon = [
"24 24 3 1",
" c None",
". c #FFFFFF",
"+ c #CC0000",
" .... ",
"++++++++++....++++++++++",
"+.......++....++.......+",
"+.......++....++.......+",
"+.......++....++.......+",
"+...++++++....++++++...+",
"+...++++++....++++++...+",
"+...+++++......+++++...+",
"+...+++++......+++++...+",
"+...+++++......+++++...+",
"+...+++++......+++++...+",
"+...+++++......+++++...+",
"+...+++++......+++++...+",
"+...++++++++++++++++...+",
"+...++++++++++++++++...+",
"+...++++++++++++++++...+",
"+...++++++++++++++++...+",
"+...++++++++++++++++...+",
"+...++++++++++++++++...+",
"+...++++++++++++++++...+",
"+......................+",
"+......................+",
"+......................+",
"++++++++++++++++++++++++"
]
save_Icon = [
"24 24 9 1",
" c None",
". c #A30500",
"+ c #5D5F5C",
"@ c #3967A0",
"# c #4B9A00",
"$ c #7E9BBD",
"% c #A9ABA8",
"& c #C7C9C6",
"* c #DCDEDB",
" ",
" @@@@@ ",
" @@$$$$$@ ",
" @$$$$$$$@ ",
" @@@@@@$@$$@ ",
" @$@@@ ",
" +%&&&@$@@@@&%%% ",
" +*@@@$@@@@@@@@&% ",
" +%*@@@@@@@@@@@@*&+ ",
" +***@@@@@@@@@@***+ ",
" +%***&@@@@@@@@&****+ ",
" +****&&@@@@@@&&****+ ",
" +***&&&&@@@@&&&&***+ ",
" +%***&&&&&@@&&&&&****+ ",
" +***&&&&&&&&&&&&&&***+ ",
" %********************+ ",
" %********************+ ",
" %&&&&&&&&&&&&&&&&&&&&+ ",
" %&%%%%%%%%%%%%%%%%%%%+ ",
" %&%%%%%%%%%%%%%%%%%%%+ ",
" %&%&&&%%%%%%%@%%#%%.%+ ",
" %%%%%%%%%%%%%%%%%%%%%+ ",
" ++++++++++++++++++++++ ",
" "
]
clear_Icon = [
"24 24 9 1",
" c None",
". c #000200",
"+ c #8B0606",
"@ c #875209",
"# c #E3383A",
"$ c #C19916",
"% c #C4A163",
"& c #E2C928",
"* c #E4D05A",
" @@@ ",
" @%%%@ ",
" @%*@@ ",
" @%@*%@ ",
" @%$$%@ ",
" @%%$%%@ ",
" @%$$$*@ ",
" @$**+++ ",
" @*%+##+. ",
" ++##+*$ ",
" +#++****$ ",
" ++****&**$ ",
" &**&*&&&*$ ",
" &*&&&*&$&*$ ",
" $*&*&$&&$$*$ ",
" $*&$&*$*&*$*$ ",
" *&$$&&$&&&&*$ ",
" $*&$&**$$**@ ",
" $*&$&****&$ ",
" $*$***$$@ ",
" $***$@ @ ",
" $@$@ ",
" @ ",
" "
]
delete_Icon = [
"24 24 3 1",
" c None",
". c #A40000",
"+ c #EE2A2A",
" ",
" ",
" . . ",
" .+. .+. ",
" .+++. .+++. ",
" .+++++. .+++++. ",
" .+++++++. .+++++++. ",
" .+++++++.+++++++. ",
" .+++++++++++++. ",
" .+++++++++++. ",
" .+++++++++. ",
" .+++++++. ",
" .+++++++++. ",
" .+++++++++++. ",
" .+++++++++++++. ",
" .+++++++.+++++++. ",
" .+++++++. .+++++++. ",
" .+++++. .+++++. ",
" .+++. .+++. ",
" .+. .+. ",
" . . ",
" ",
" ",
" "
]
memo_Allume_Icon = [
"24 24 9 1",
" c None",
". c #4F514E",
"+ c #635D41",
"@ c #676966",
"# c #848784",
"$ c #888A87",
"% c #E9D312",
"& c #FEEE4D",
"* c #FDFFFC",
" ",
" ",
" ",
" ",
" %%%%%% ",
" %%&&&&%% ",
" %%&&&&&&%% ",
" %%&&&**&&&%% ",
" %%&&&****&&&%% ",
" %&&&******&&&% ",
" %&&&******&&&% ",
" %&&&******&&&% ",
" %%&&&****&&&%% ",
" %%&&&**&&&%% ",
" %%&&&&&&%% ",
" %%%&&%%% ",
" .%%%%+ ",
" @..... ",
" ..#$$@ ",
" @@.... ",
" ..$$$@ ",
" @@.... ",
" $$$$ ",
" "
]
memo_Eteint_Icon = [
"24 24 9 1",
" c None",
". c #000000",
"+ c #204A87",
"@ c #555753",
"# c #4F514E",
"$ c #635D41",
"% c #676966",
"& c #848784",
"* c #888A87",
" ",
" ",
" ",
" ",
" ...... ",
" ........ ",
" .......... ",
" ............ ",
" ....+.+.+.+... ",
" ...+.+.+.++... ",
" ...@......@... ",
" ...@......@... ",
" ....@....@.... ",
" ....@..@.... ",
" ...@..@... ",
" ..@..@.. ",
" #@..@$ ",
" %##### ",
" ##&**% ",
" %%#### ",
" ##***% ",
" %%#### ",
" **** ",
" "
]
origin_Icon = [
"24 24 14 1",
" c None",
". c #EF2929",
"+ c #A40000",
"@ c #DDDFDC",
"# c #888A85",
"$ c #DDDEDB",
"% c #DCDEDB",
"& c #DCDEDC",
"* c #DBDDDA",
"= c #BABDB6",
"- c #555753",
"; c #729FCF",
"> c #3465A4",
", c #8191AA",
" ",
" ",
" .+ ",
" ..++ ",
" ....++ ",
" .....+++ ",
" ....@#++++ ",
" ....@@@#++++ ",
" ....@@@@@#++++ ",
" ....@@@@$@@#++++ ",
" ....@@@$@@%@@#++++ ",
" ....@@@@@@@@%@@#++++ ",
" ...@@@%%%%&%%*@@#+++ ",
" ..@@@@@@@@@@@@@@@#++ ",
" #@@=#---@@=====@# ",
" #@@=#---@@;>>>;@# ",
" #@@,#---@@;>>>;@# ",
" #@@,#---@@;>>>;@# ",
" #@@=#---@@-----@# ",
" #@@=#---@@@@@@@@# ",
" #@@=##--@@@@@@@@# ",
" ################# ",
" ",
" "
]
zero_Icon = [
"24 24 6 1",
" c None",
". c #CC0000",
"+ c #000000",
"@ c #BABDB6",
"# c #4E9A06",
"$ c #204A87",
" .. ",
" .. ",
" .. ",
" .. ",
" .. ",
" .. ",
" .. ",
" ++@ ..@ ++@ ",
" ++++@ +..+@ ++++@ ",
" ++@ ++@ ++..++@ ++@ ++@",
" +@ +@ +@.. +@ +@ +@",
"######+@###$$#+@######+@",
"######+@###$$#+@######+@",
" ++@ ++@ ++..++@ ++@ ++@",
" ++++ + ++++ + ++++ ",
" ++ ++ ++ ++ ++ ",
" + .. + ",
" ++ ..++ ",
" ++ ..+ ",
" .. ",
" .. ",
" .. ",
" .. ",
" .. "
]
reset_Icon = [
"24 24 3 1",
" c None",
". c #3465A4",
"+ c #888A85",
" ",
" ........ ",
" .++++++++. ",
" .++..+....+. ..... ",
" .+.. .+....+. .+++. ",
" .+. .+....+..+.+. ",
" ... .+....+.+.+. ",
" .+....+..+. ",
" .+......+. ",
" .+.....+. ",
" .+....+. ",
" ...... .+...+. ",
" .++++. .++++. ",
" .+...+. ...... ",
" .+....+. ",
" .+.....+. ",
" .+......+. ",
" .+..+....+. ",
" .+.+.+....+. ... ",
" .+.+..+....+. .+. ",
" .+++. .+....+. ..+. ",
" ..... .+....+..++. ",
" .++++++++. ",
" ........ "
]
code_Python_Icon = [
"24 24 3 1",
" c None",
". c #3B7AAC",
"+ c #EDD400",
" ",
" ++++++++++++++++++++. ",
" + . ",
" + . ",
" + ..... . ",
" + . ..... . ",
" + ....... + . ",
" + ... +++ . ",
" + ........ ++++ . ",
" + ......... +++++ . ",
" + ......... ++++++ . ",
" + ....... +++++++ . ",
" + ...... +++++++++ . ",
" + ..... +++++++++ . ",
" + .... ++++++++ . ",
" + ... +++ . ",
" + . +++++++ . ",
" + +++++ + . ",
" + +++++ . ",
" + . ",
" + . ",
" + . ",
" +.................... ",
" "
]
code_FC_Icon = [
"24 24 5 1",
" c None",
". c #000000",
"+ c #CB0208",
"@ c #204A86",
"# c #BABDB6",
" ",
" ",
" ",
" ",
" ",
"@@@ @@@ @@@ @@@",
"@ @ @ @",
"@ ++# @ @ ++# @",
"@ ++++# @ @ ++++# @",
"@ ++# ++#@ @ ++# ++#@",
"@ +# +#@ @ +# +#@",
"@ +# +#@ @ +# +#@",
"@ +# +#@ @ +# +#@",
"@ ++# ++#@ @ ++# ++#@",
"@ ++++ @ @ ++++ @",
"@ ++ @ @ ++ @",
"@ @ @ @",
"@ @ @ @",
"@@@ @@@ . @@@ @@@",
" .. ",
" . ",
" .. ",
" .. ",
" "
]
rotate_Icon = [
"24 24 4 1",
" c None",
". c #000100",
"+ c #000201",
"@ c #6695BF",
" ",
" ++++++++ ",
" +@@@@@@@@+ ",
" +@@......@@++ ",
" +@@.@@@@@@.@@@+ ++ ",
" +@@.@@++++@@.@@@+@+ ",
" +@@.@@+ +@@.@@@@+ ",
" +@@.@@+ +@@.@@@+ ",
" +@.@@+ +@@.@@@+ ",
" +@.@+ ++@@@@@@@+ ",
" +@.@+ ++@@@@@@+ ",
" +@.@+ +++@@@+ ",
" +@.@+ +++++ ",
" +@.@+ ",
" +@.@@+ ",
" +@@.@@+ +++ ",
" +@@.@@+ +@+ ",
" +@@.@@+++++@@+ ",
" +@@.@@@@@@@@+ ",
" +@@.....@@+ ",
" +@@@@@@@++ ",
" +++++++ ",
" ",
" "
]
translate_Icon = [
"24 24 9 1",
" c None",
". c #000100",
"+ c #000407",
"@ c #6694BF",
"# c #6D92BE",
"$ c #6A93C5",
"% c #6795C0",
"& c #6F93C0",
"* c #6896C1",
" ",
" ",
" .. ",
" .@. ",
" .@@.. ",
" .@@@@. ",
" .@@@@@. ",
" ..........@@@@@@. ",
" +**&%%&@&@@@@@@@. ",
" .............+@@@$.. ",
" +@@@@@@@@@@@@@@@@@@. ",
" ..........+@@@@@@@@@@. ",
" +@@@@@@@@@@@@@@@@@@+ ",
" ........+@@@@@@@@@++ ",
" +@@@@@@@@@@@@@@@. ",
" ..........@@@@@@. ",
" .@@@@@. ",
" .@@@@. ",
" .@@.. ",
" .@. ",
" .. ",
" ",
" ",
" "
]
OnClickApply_Icon = [
"24 24 9 1",
" c None",
". c #910000",
"+ c #F20001",
"@ c #54595E",
"# c #4B9A00",
"$ c #8A8C89",
"% c #B0B2AE",
"& c #FED758",
"* c #DFE1DC",
" ",
" .. ",
" ....... ",
" ....++ ",
" .+.+++ ",
" ....+++++ ",
" $.+++++++%%%% ",
" **$.++++++***&& ",
" %***$.+++++&*&&& ",
" *****$.++++&&&&* ",
" %******$.+++&&&**% ",
" *******&$.++&&&&** ",
" ***&&&&&&$.+&&&&&&& ",
" %*******&&&$.&&&&**% ",
" *********&&&$&&&**** ",
" ********&&&&&&&&&***% ",
" %*******&&&*&&&*&&&**% ",
" %%%%%%%%&&%%%&%%%&&%%$ ",
" %%%$%%%%%%%%%&%@%#%+%$ ",
" %%%$$%%%%%%%%&%%%%%%%$ ",
" %%%%%%%%%%%%%&%%%%%%%$ ",
" $%%%%%%%%%%%%%%%%%%%%$ ",
" @@@@@@@@@@@@@@@@@@@@@ ",
" "
]
normalWork_Icon = [
"24 24 9 1",
" c None",
". c #565854",
"+ c #555753",
"@ c #2E3436",
"# c #FFFFFF",
"$ c #FCE94F",
"% c #FEFEFE",
"& c #EDD400",
"* c #BABDB6",
" ",
" ...................... ",
" . . ",
" . +++++ +++++ . ",
" . . ",
" . . ",
" . +++++ +++++ . ",
" . . ",
" . . ",
" . +++++ +++++ . ",
" . . ",
" . . ",
" ...................... ",
" ",
" ",
" @@@@@@@@@@@@@@@",
" @#$$#########%@",
" @#&&###@@@#@@%@",
" @%&&%########%@",
" @#**#########%@",
" @@@@@@@@@@@@@@@",
" ",
" ",
" "
]
PointCenter_Icon = [
"24 24 9 1",
" c None",
". c #CB0007",
"+ c #363C3C",
"@ c #A34467",
"# c #666768",
"$ c #756D98",
"% c #999E9D",
"& c #C2C4C0",
"* c #E3E5E1",
" ",
" +++++++ ",
" ++%&***&#++ ",
" +&***&&&***&+ ",
" +**%#+++++%&**+ ",
" +*&#+ +#&*+ ",
" +**#+ +#**+ ",
" +%*#+ +#*%+ ",
" +*&+ . . +&*+ ",
"+#*% .. .. %*#+ ",
"+%*# ...... #*%+ ",
"+%*+ .... +*%+ ",
"+%*+ .... +*%+ ",
"+#*# ...... #*#+ ",
" +*% .. .. %*+ ",
" +&* . . +*&+ ",
" +*+ +%*+ ",
" +&*+ +#*&+ ",
" +&*++ ++%*&+ ",
" +&**&+++++&**&+ ",
" +#&*******%#+ ",
" ++#%%%%%#++ ",
" +++++++ ",
" "
]
positif_Icon = [
"24 24 9 1",
" c None",
". c #213B07",
"+ c #3B6212",
"@ c #487415",
"# c #5AA713",
"$ c #66BB14",
"% c #6FC31C",
"& c #7ACE23",
"* c #80D82B",
" ",
" ",
" ++++++ ",
" +****+ ",
" +****+ ",
" +****+ ",
" +****+ ",
" +****+ ",
" +****+ ",
" ++++++++****++++++++ ",
" +******************+ ",
" +******************+ ",
" +******************+ ",
" +******************+ ",
" ++++++++****++++++++ ",
" +****+ ",
" +****+ ",
" +****+ ",
" +****+ ",
" +****+ ",
" +****+ ",
" ++++++ ",
" ",
" "
]
negatif_Icon = [
"24 24 9 1",
" c None",
". c #000100",
"+ c #3C0406",
"@ c #680A0D",
"# c #7B0B13",
"$ c #B00206",
"% c #C40D0D",
"& c #D7171A",
"* c #EA2525",
" ",
" ",
" ",
" ",
" ",
" ",
" ",
" ",
" ",
" @@@@@@@@@@@@@@@@@@@@ ",
" @******************@ ",
" @******************@ ",
" @******************@ ",
" @******************@ ",
" @@@@@@@@@@@@@@@@@@@@ ",
" ",
" ",
" ",
" ",
" ",
" ",
" ",
" ",
" "
]
global objectPlacementAngle ; objectPlacementAngle = ""
def objectRealPlacement3D(obj):
global objectPlacementAngle
try:
objectPlacement = obj.Shape.Placement
####
objectPlacementBase = FreeCAD.Vector(objectPlacement.Base)
####
objectWorkCenter = objectPlacementBase
####
objectPlacementAngle = objectPlacement.Rotation.toEuler()
if hasattr(obj, "getGlobalPlacement"):
globalPlacement = obj.getGlobalPlacement()
globalPlacementBase = FreeCAD.Vector(globalPlacement.Base)
objectRealPlacement3D = globalPlacementBase.add(objectWorkCenter).sub(objectPlacementBase)
objectPlacementAngle = globalPlacement.Rotation.toEuler()
else:
objectRealPlacement3D = objectWorkCenter
return objectRealPlacement3D
except Exception:
return FreeCAD.Vector(0.0, 0.0, 0.0)
try:
_fromUtf8 = QtCore.QString.fromUtf8
except AttributeError:
def _fromUtf8(s):
return s
class Ui_MainWindow(object):
def __init__(self ):
global path, path2
self.window = MainWindow
self.path = path
self.vueActive = FreeCADGui.ActiveDocument.ActiveView
self.click = self.vueActive.addEventCallback("SoMouseButtonEvent",self.souris)
def souris(self,info):
global sourisPass
if (info["Button"] == "BUTTON1") and (info["State"] == "DOWN"):
#time.sleep(0.02)
sourisPass = 0
#print("ok")
def setupUi(self, MainWindow):
self.window = MainWindow
MainWindow.setObjectName(_fromUtf8("MainWindow"))
global saveListView
# MainWindow.resize(360, 300)
# MainWindow.setMinimumSize(QtCore.QSize(330, 10))
# MainWindow.setMaximumSize(QtCore.QSize(330, 330))
# MainWindow.setStyleSheet("background-color: rgb(50, 50, 50);")
# MainWindow.move(900, 100)
self.centralwidget = QtWidgets.QWidget(MainWindow)
self.centralwidget.setObjectName(_fromUtf8("centralwidget"))
####
self.groupBox_Rotation = QtWidgets.QGroupBox(self.centralwidget)
self.groupBox_Rotation.setEnabled(False)
self.RB_Bond_Box_Center = QtWidgets.QRadioButton()
self.RB_Bond_Box_Center.setChecked(True)
self.RB_Bond_Box_Center.setIcon(QtGui.QIcon(QtGui.QPixmap(boundBox_Center_Icon))) #icone dans une variable
self.RB_Bond_Box_Center.clicked.connect(self.on_RB_CenterRot)
self.RB_Center_Mass = QtWidgets.QRadioButton()
self.RB_Center_Mass.setIcon(QtGui.QIcon(QtGui.QPixmap(centerMass_Icon))) # icone dans une variable
self.RB_Center_Mass.clicked.connect(self.on_RB_CenterRot)
self.RB_Point_Clicked = QtWidgets.QRadioButton()
self.RB_Point_Clicked.setIcon(QtGui.QIcon(QtGui.QPixmap(point_Clicked_Icon))) # icone dans une variable
self.RB_Point_Clicked.clicked.connect(self.on_RB_CenterRot)
####
self.groupBox_Axis = QtWidgets.QGroupBox()
self.groupBox_Axis.setEnabled(False)
self.RB_Rotation_0 = QtWidgets.QRadioButton() # factice pour bouton invisible
self.RB_Rotation_0.setVisible(False)
# self.RB_Rotation_0.clicked.connect(self.on_RB_Rotation_0)
self.RB_Rotation_X = QtWidgets.QRadioButton()
self.RB_Rotation_X.setChecked(True)
self.RB_Rotation_X.setIcon(QtGui.QIcon(QtGui.QPixmap(axis_Z_Icon))) # icone dans une variable
self.RB_Rotation_X.clicked.connect(self.on_RB_Rotation_X)
self.RB_Rotation_Y = QtWidgets.QRadioButton()
self.RB_Rotation_Y.setIcon(QtGui.QIcon(QtGui.QPixmap(axis_Y_Icon))) # icone dans une variable
self.RB_Rotation_Y.clicked.connect(self.on_RB_Rotation_Y)
# self.RB_Angle_Y.setFont(QtGui.QFont(self.FontImpost,weight=QtGui.QFont.Bold)) # Bold
# self.RB_Angle_Y.setStyleSheet("color : #008700") # Color text
self.RB_Rotation_Z = QtWidgets.QRadioButton()
self.RB_Rotation_Z.setIcon(QtGui.QIcon(QtGui.QPixmap(axis_X_Icon))) # icone dans une variable
self.RB_Rotation_Z.clicked.connect(self.on_RB_Rotation_Z)
self.RB_Direction_D = QtWidgets.QRadioButton()
self.RB_Direction_D.setIcon(QtGui.QIcon(QtGui.QPixmap(direction_Icon))) # icone dans une variable
self.RB_Direction_D.clicked.connect(self.on_RB_Direction_D)
####
self.groupBox_Pos_Mouse = QtWidgets.QGroupBox()
self.groupBox_Pos_Mouse.setEnabled(False)
self.DS_Pos_Mouse_X = QtWidgets.QDoubleSpinBox()
self.DS_Pos_Mouse_X.setMinimum(-999999.9)
self.DS_Pos_Mouse_X.setMaximum(99999999.9)
self.DS_Pos_Mouse_X.setDecimals(6)
self.DS_Pos_Mouse_X.setSuffix(" X")
# self.DS_Pos_Mouse_X.setIcon(QtGui.QIcon(QtGui.QPixmap(CameraToFace))) # icone dans une variable
self.DS_Pos_Mouse_X.valueChanged.connect(self.on_DS_Pos_Mouse_X)
self.DS_Pos_Mouse_Y = QtWidgets.QDoubleSpinBox()
self.DS_Pos_Mouse_Y.setMinimum(-999999.9)
self.DS_Pos_Mouse_Y.setMaximum(99999999.9)
self.DS_Pos_Mouse_Y.setDecimals(6)
self.DS_Pos_Mouse_Y.setSuffix(" Y")
# self.PB_To_Face.setIcon(QtGui.QIcon(QtGui.QPixmap(CameraToFace))) # icone dans une variable
self.DS_Pos_Mouse_Y.valueChanged.connect(self.on_DS_Pos_Mouse_Y)
self.DS_Pos_Mouse_Z = QtWidgets.QDoubleSpinBox()
self.DS_Pos_Mouse_Z.setMinimum(-999999.9)
self.DS_Pos_Mouse_Z.setMaximum(99999999.9)
self.DS_Pos_Mouse_Z.setDecimals(6)
self.DS_Pos_Mouse_Z.setSuffix(" Z")
# self.PB_To_Face.setIcon(QtGui.QIcon(QtGui.QPixmap(CameraToFace))) # icone dans une variable
self.DS_Pos_Mouse_Z.valueChanged.connect(self.on_DS_Pos_Mouse_Z)
####
self.groupBox_Work = QtWidgets.QGroupBox()
self.groupBox_Work.setEnabled(False)
# self.SC_Slider_Bar = QtWidgets.QSlider()
# self.SC_Slider_Bar.setMinimum(0.0)
# self.SC_Slider_Bar.setMaximum(359.0)
# self.SC_Slider_Bar.setValue(0.0)
# self.SC_Slider_Bar.setSliderPosition(0)
# self.SC_Slider_Bar.setOrientation(QtCore.Qt.Horizontal)
# self.SC_Slider_Bar.valueChanged.connect(self.on_SC_Slider_Bar)
self.LE_Increment = QtWidgets.QLineEdit()
self.LE_Increment.setReadOnly(True)
self.LE_Increment.setText(str(0.0))
#self.LE_Increment.returnPressed.connect(self.on_LE_Increment_Pressed)
self.LE_Increment.textChanged.connect(self.on_LE_Increment_Pressed)
self.DS_Value_Angle_Dimension = QtWidgets.QDoubleSpinBox()
self.DS_Value_Angle_Dimension.setMinimum(-360.0)
self.DS_Value_Angle_Dimension.setMaximum(360.0)
self.DS_Value_Angle_Dimension.setSuffix(" Degrees")
self.DS_Value_Angle_Dimension.setDecimals(4)
self.DS_Value_Angle_Dimension.valueChanged.connect(self.on_DS_Value_Angle_Dimension)
self.PB_Negatif = QtWidgets.QPushButton()
self.PB_Negatif.setIcon(QtGui.QIcon(QtGui.QPixmap(negatif_Icon))) # icone dans une variable
self.PB_Negatif.clicked.connect(self.on_PB_Negatif_clicked)
self.PB_Apply = QtWidgets.QPushButton()
self.PB_Apply.setAutoRepeat(True)
self.PB_Apply.setIcon(QtGui.QIcon(QtGui.QPixmap(apply_Icon))) # icone dans une variable
self.PB_Apply.clicked.connect(self.on_PB_Apply_clicked)
self.CB_Position = QtWidgets.QCheckBox()
#self.CB_Position.setEnabled(False)
self.CB_Position.setIcon(QtGui.QIcon(QtGui.QPixmap(translate_Icon))) #icone dans une variable
self.CB_Position.clicked.connect(self.on_CB_Position)
self.PB_Point = QtWidgets.QPushButton()
#self.PB_Point.setEnabled(False)
self.PB_Point.setIcon(QtGui.QIcon(QtGui.QPixmap(point_Icon))) # icone dans une variable
self.PB_Point.clicked.connect(self.on_CB_Point)
self.PB_PointCenter = QtWidgets.QPushButton()
#self.PB_PointCenter.setEnabled(False)
self.PB_PointCenter.setIcon(QtGui.QIcon(QtGui.QPixmap(PointCenter_Icon))) # icone dans une variable
self.PB_PointCenter.clicked.connect(self.on_PB_PointCenter)
self.CBox_View = QtWidgets.QComboBox()
#QtCore.QObject.connect(self.CBox_View, QtCore.SIGNAL("currentIndexChanged(QString)"), self.on_CBox_View)
QtCore.QObject.connect(self.CBox_View, QtCore.SIGNAL("activated(QString)"), self.on_CBox_View)
self.CBox_Impost = QtWidgets.QComboBox()
self.CBox_Impost.setCurrentIndex(4)
self.CBox_Impost.setMaxVisibleItems(16)
self.CBox_Impost.addItem("")
self.CBox_Impost.addItem("")
self.CBox_Impost.addItem("")
self.CBox_Impost.addItem("")
self.CBox_Impost.addItem("")
self.CBox_Impost.addItem("")
self.CBox_Impost.addItem("")
self.CBox_Impost.addItem("")
self.CBox_Impost.addItem("")
self.CBox_Impost.addItem("")
self.CBox_Impost.addItem("")
self.CBox_Impost.addItem("")
self.CBox_Impost.addItem("")
self.CBox_Impost.addItem("")
self.CBox_Impost.addItem("")
self.CBox_Impost.addItem("")
QtCore.QObject.connect(self.CBox_Impost, QtCore.SIGNAL("currentIndexChanged(QString)"), self.on_CBox_Impost)
self.CBox_Memory = QtWidgets.QComboBox()
#self.CBox_Memory.addItem("")
self.CBox_Memory.setDuplicatesEnabled(True) #False
#QtCore.QObject.connect(self.CBox_Memory, QtCore.SIGNAL("currentIndexChanged(QString)"), self.on_CBox_Memory)
QtCore.QObject.connect(self.CBox_Memory, QtCore.SIGNAL("activated(QString)"), self.on_CBox_Memory)
self.groupBox_Data = QtWidgets.QGroupBox()
self.groupBox_Data.setEnabled(False)
self.TE_Memorize = QtWidgets.QListView()
saveListView = QtGui.QStandardItemModel()
self.TE_Memorize.setModel(saveListView)
self.TE_Memorize.setSelectionRectVisible(True)#
self.TE_Memorize.setAlternatingRowColors(True)#
self.TE_Memorize.setStyleSheet("alternate-background-color:#fdeeee;")
self.TE_Memorize.clicked[QtCore.QModelIndex].connect(self.on_TE_Clicked)
self.PB_Save_Memorize = QtWidgets.QPushButton()
self.PB_Save_Memorize.setIcon(QtGui.QIcon(QtGui.QPixmap(save_Icon))) # icone dans une variable
self.PB_Save_Memorize.clicked.connect(self.on_PB_Save_Memorize)
self.PB_ClearMemo = QtWidgets.QPushButton()
self.PB_ClearMemo.setIcon(QtGui.QIcon(QtGui.QPixmap(clear_Icon))) # icone dans une variable
self.PB_ClearMemo.clicked.connect(self.on_PB_ClearMemo)
self.PB_Delete_Line_Memory = QtWidgets.QPushButton()
self.PB_Delete_Line_Memory.setIcon(QtGui.QIcon(QtGui.QPixmap(delete_Icon))) # icone dans une variable
self.PB_Delete_Line_Memory.clicked.connect(self.on_PB_Delete_Line_Memory)
self.PB_Memorize = QtWidgets.QPushButton()
self.PB_Memorize.setIcon(QtGui.QIcon(QtGui.QPixmap(memo_Eteint_Icon))) # icone dans une variable
self.PB_Memorize.clicked.connect(self.on_PB_Memorize)
self.CB_On_Click_Apply = QtWidgets.QCheckBox()
self.CB_On_Click_Apply.setIcon(QtGui.QIcon(QtGui.QPixmap(OnClickApply_Icon))) # icone dans une variable
self.CB_On_Click_Apply.clicked.connect(self.on_CB_On_Click_Apply)
self.CB_DataInMacro = QtWidgets.QCheckBox()
self.CB_DataInMacro.setIcon(QtGui.QIcon(QtGui.QPixmap(code_Python_Icon))) # icone dans une variable
self.CB_DataInMacro.clicked.connect(self.On_CB_DataInMacro)
self.label_00 = QtWidgets.QLabel()
self.label_00.setStyleSheet("color : #ffffff; background-color: red; font: bold 10px;") # white red bold
####
self.groupBox_Command = QtWidgets.QGroupBox()
self.PB_Quit = QtWidgets.QPushButton()
self.PB_Quit.setIcon(QtGui.QIcon(QtGui.QPixmap(quit_Icon))) # icone dans une variable
self.PB_Quit.clicked.connect(self.on_PB_Quit_clicked)
self.PB_Original = QtWidgets.QPushButton()
self.PB_Original.setIcon(QtGui.QIcon(QtGui.QPixmap(origin_Icon))) # icone dans une variable
self.PB_Original.clicked.connect(self.on_PB_Original_clicked)
self.PB_Zero = QtWidgets.QPushButton()
self.PB_Zero.setIcon(QtGui.QIcon(QtGui.QPixmap(zero_Icon))) # icone dans une variable
self.PB_Zero.clicked.connect(self.on_PB_Zero_clicked)
self.PB_Reset = QtWidgets.QPushButton()
self.PB_Reset.setIcon(QtGui.QIcon(QtGui.QPixmap(reset_Icon))) # icone dans une variable
self.PB_Reset.clicked.connect(self.on_PB_Reset_clicked)
#### Gridlayout Header
self.gridLayoutWidget = QtWidgets.QWidget(self.centralwidget)
self.gridLayout_00_00 = QtWidgets.QGridLayout(self.centralwidget)
self.gridLayout_00_00.setContentsMargins(10, 10, 10, 10)#Gauche Haut Droit Bas
#### Gridlayout Header
#### Gridlayout BEGIN
self.grid_00_01 = QtWidgets.QGridLayout()
# self.gridLayoutWidget_3 = QtWidgets.QWidget(self.groupBox_Rotation)
self.grid_00_01.addWidget(self.groupBox_Rotation, 0, 0, 1, 1)
self.grid_00_01.setContentsMargins(0, 0, 0, 0) #Gauche Haut Droite Bas
self.grid_00_01_00 = QtWidgets.QGridLayout(self.groupBox_Rotation)
self.grid_00_01_00.setContentsMargins(10, 10, 0, 10)
self.grid_00_01_00.addWidget(self.RB_Bond_Box_Center, 0, 0, 1, 1)
self.grid_00_01_00.addWidget(self.RB_Center_Mass, 1, 0, 1, 1)
self.grid_00_01_00.addWidget(self.RB_Point_Clicked, 2, 0, 1, 1)
self.gridLayout_00_00.addLayout(self.grid_00_01, 0, 0, 1, 1)
####
self.grid_00_02 = QtWidgets.QGridLayout()
self.grid_00_02.addWidget(self.groupBox_Axis, 0, 0, 1, 1)
self.grid_00_02.setContentsMargins(0, 0, 0, 0)
self.grid_00_02_00 = QtWidgets.QGridLayout(self.groupBox_Axis)
self.grid_00_02_00.setContentsMargins(10, 10, 0, 10)
self.grid_00_02_00.addWidget(self.RB_Rotation_X, 0, 0, 1, 1)
self.grid_00_02_00.addWidget(self.RB_Rotation_Y, 1, 0, 1, 1)
self.grid_00_02_00.addWidget(self.RB_Rotation_Z, 2, 0, 1, 1)
self.grid_00_02_00.addWidget(self.RB_Direction_D, 3, 0, 1, 1)
self.gridLayout_00_00.addLayout(self.grid_00_02, 0, 1, 1, 1)
####
self.grid_00_03 = QtWidgets.QGridLayout()
self.grid_00_03.addWidget(self.groupBox_Pos_Mouse, 1, 0, 1, 1)
self.grid_00_03.setContentsMargins(0, 0, 0, 0)
self.grid_00_03_00 = QtWidgets.QGridLayout(self.groupBox_Pos_Mouse)
self.grid_00_03_00.setContentsMargins(10, 10, 10, 10)
self.grid_00_03_00.addWidget(self.DS_Pos_Mouse_X, 0, 0, 1, 1)
self.grid_00_03_00.addWidget(self.DS_Pos_Mouse_Y, 0, 1, 1, 1)
self.grid_00_03_00.addWidget(self.DS_Pos_Mouse_Z, 0, 2, 1, 1)
self.gridLayout_00_00.addLayout(self.grid_00_03, 1, 0, 1, 2)
####
self.grid_00_044 = QtWidgets.QGridLayout()
self.grid_00_044.addWidget(self.groupBox_Work, 2, 0, 1, 1)
self.grid_00_044.setContentsMargins(0, 0, 0, 0)
self.grid_00_044_00 = QtWidgets.QGridLayout(self.groupBox_Work)
self.grid_00_044_00.addWidget(self.CB_Position, 0, 0, 1, 1)
self.grid_00_044_00.addWidget(self.PB_Point, 0, 1, 1, 1)
self.grid_00_044_00.addWidget(self.PB_PointCenter, 0, 2, 1, 1)
#
self.grid_00_044_00.addWidget(self.CBox_View, 1, 0, 1, 1)
self.grid_00_044_00.addWidget(self.CBox_Impost, 1, 1, 1, 1)
self.grid_00_044_00.addWidget(self.CBox_Memory, 1, 2, 1, 1)
#
self.grid_00_044_00.addWidget(self.PB_Negatif, 2, 0, 1, 1)
self.grid_00_044_00.addWidget(self.DS_Value_Angle_Dimension, 2, 1, 1, 1)
self.grid_00_044_00.addWidget(self.PB_Apply, 2, 2, 1, 1)
#
self.grid_00_044_00.addWidget(self.LE_Increment, 3, 0, 1, 3)
self.grid_00_044_00.addWidget(self.label_00, 4, 0, 1, 3)
self.gridLayout_00_00.addLayout(self.grid_00_044, 2, 0, 1, 2)
####
self.grid_00_044b = QtWidgets.QGridLayout()
self.grid_00_044b.addWidget(self.groupBox_Data, 3, 0, 1, 1)
self.grid_00_044b.setContentsMargins(0, 0, 0, 0)
self.grid_00_044b_00 = QtWidgets.QGridLayout(self.groupBox_Data)
self.grid_00_044b_00.addWidget(self.TE_Memorize, 0, 0, 1, 4)
self.grid_00_044b_00.addWidget(self.PB_Save_Memorize, 1, 0, 1, 1)
self.grid_00_044b_00.addWidget(self.PB_ClearMemo, 1, 1, 1, 1)
self.grid_00_044b_00.addWidget(self.PB_Delete_Line_Memory, 1, 2, 1, 1)
self.grid_00_044b_00.addWidget(self.PB_Memorize, 1, 3, 1, 1)
self.grid_00_044b_00.addWidget(self.CB_DataInMacro, 2, 0, 1, 1)
self.grid_00_044b_00.addWidget(self.CB_On_Click_Apply, 2, 1, 1, 1)
self.gridLayout_00_00.addLayout(self.grid_00_044b, 3, 0, 1, 2)
####
self.grid_00_08 = QtWidgets.QGridLayout()
self.grid_00_08.addWidget(self.groupBox_Command, 4, 0, 1, 1)
self.grid_00_08.setContentsMargins(0, 0, 0, 0)
self.grid_00_08_00 = QtWidgets.QGridLayout(self.groupBox_Command)
self.grid_00_08_00.addWidget(self.PB_Quit, 0, 0, 1, 1)
self.grid_00_08_00.addWidget(self.PB_Original, 0, 1, 1, 1)
self.grid_00_08_00.addWidget(self.PB_Zero, 0, 2, 1, 1)
self.grid_00_08_00.addWidget(self.PB_Reset, 0, 3, 1, 1)
self.gridLayout_00_00.addLayout(self.grid_00_08, 4, 0, 1, 2)
#### Gridlayout END
MainWindow.setCentralWidget(self.centralwidget)
self.retranslateUi(MainWindow)
QtCore.QMetaObject.connectSlotsByName(MainWindow)
def retranslateUi(self, MainWindow):
global path
MainWindow.setWindowFlags(PySide2.QtCore.Qt.WindowStaysOnTopHint) # this function turns the front window (stay to hint)
MainWindow.setWindowIcon(QtGui.QIcon(self.path+"Macro_Rotate_To_Point.png")) # change l'icone de la fenetre principale
MainWindow.setWindowTitle(__title__ + " (" + __version__ + " : " + __date__ + " (rmu)")
_translate = QtCore.QCoreApplication.translate
self.groupBox_Rotation.setTitle(_translate("MainWindow", "Point Rotation"))
self.RB_Bond_Box_Center.setText(_translate("MainWindow", "Bounbox Center"))
self.RB_Bond_Box_Center.setToolTip(_translate("MainWindow", "Point rotation on BoundBox Center"))
self.RB_Center_Mass.setText(_translate("MainWindow", "Center of Mass"))
self.RB_Center_Mass.setToolTip(_translate("MainWindow", "Point rotation on Center Mass"))
self.RB_Point_Clicked.setText(_translate("MainWindow", "Point clicked"))
self.RB_Point_Clicked.setToolTip(_translate("MainWindow", "Point rotation on Point Mouse clicked on the object"+"\n"
"If twoo points are clicked, the second point is used for axis rotation"+"\n"
"The point axis rotation Can be changed during the work as long as the object is selected"+"\n"
"For this press the CTRL KEY and click the new point rotation"))
####
self.groupBox_Axis.setTitle(_translate("MainWindow", "Axis Rotation"))
self.RB_Rotation_X.setText(_translate("MainWindow", "Rotation(Z) Yaw"))
self.RB_Rotation_X.setToolTip(_translate("MainWindow", "Rotation on Axis Yaw (Z)"))
self.RB_Rotation_Y.setText(_translate("MainWindow", "Rotation(Y) Pitch"))
self.RB_Rotation_Y.setToolTip(_translate("MainWindow", "Rotation on Axis Pitch (Y)"))
self.RB_Rotation_Z.setText(_translate("MainWindow", "Rotation(X) Roll"))
self.RB_Rotation_Z.setToolTip(_translate("MainWindow", "Rotation on Axis Roll (X)"))
self.RB_Direction_D.setText(_translate("MainWindow", "Direction"))
self.RB_Direction_D.setToolTip(_translate("MainWindow", "Rotation or Translation on Direction" + "\n"
"For use the Direction option:" + "\n"
"Select First: the object to Rotate/Translate" + "\n"
"Second: the path: Line, Wire or Edge"))
####
self.groupBox_Work.setTitle(_translate("MainWindow", "Work"))
self.groupBox_Pos_Mouse.setTitle(_translate("MainWindow", "Coordinates Point clicked"))
self.groupBox_Pos_Mouse.setToolTip(_translate("MainWindow", "Position click mouse modification possible only with mode Point clicked"))
self.DS_Pos_Mouse_X.setToolTip(_translate("MainWindow", "Position click mouse X" + "\n" +
"modification only with mode Point clicked"))
self.DS_Pos_Mouse_Y.setToolTip(_translate("MainWindow", "Position click mouse Y" + "\n" +
"modification only with mode Point clicked"))
self.DS_Pos_Mouse_Z.setToolTip(_translate("MainWindow", "Position click mouse Z" + "\n" +
"modification only with mode Point clicked"))
####
self.CB_Position.setText(_translate("MainWindow", "Translation"))
self.CB_Position.setToolTip(_translate("MainWindow", "Check for move the object to axis choice X, Y or Z"))
self.PB_Point.setText(_translate("MainWindow", "Point"))
self.PB_Point.setToolTip(_translate("MainWindow", "Create one point to visualise the point rotation"))
self.PB_PointCenter.setText(_translate("MainWindow", "Center"))
self.PB_PointCenter.setToolTip(_translate("MainWindow", "Create one point on center face, circle "))
self.LE_Increment.setToolTip(_translate("MainWindow", "Display the original Data + the modification"))
#
#self.CBox_View.setItemText(0,_translate("MainWindow", "0"))
self.CBox_View.setToolTip(_translate("MainWindow", "Memorize the view associate with the Object worked" + "\n"
"For automate the zoom on object clicked, see:" + "\n"
"User parameter:BaseApp/Preferences/Macros/FCMmacros/" + __title__ + " > switchZoomOnCilck" "\n"
"and check the 'switchZoomOnCilck' option on True and restart " + __title__ ))
self.CBox_Impost.setCurrentIndex(4)
self.CBox_Impost.setMaxVisibleItems(16)
self.CBox_Impost.setItemText(0, "0.0001")
self.CBox_Impost.setItemText(1, "0.001")
self.CBox_Impost.setItemText(2, "0.01")
self.CBox_Impost.setItemText(3, "0.1")
self.CBox_Impost.setItemText(4, "0")
self.CBox_Impost.setItemText(5, "1")
self.CBox_Impost.setItemText(6, "5")
self.CBox_Impost.setItemText(7, "10")
self.CBox_Impost.setItemText(8, "20")
self.CBox_Impost.setItemText(9, "30")
self.CBox_Impost.setItemText(10, "40")
self.CBox_Impost.setItemText(11, "45")
self.CBox_Impost.setItemText(12, "60")
self.CBox_Impost.setItemText(13, "90")
self.CBox_Impost.setItemText(14, "120")
self.CBox_Impost.setItemText(15, "180")
self.CBox_Impost.setToolTip(_translate("MainWindow", "Value standard imposted"))
#
self.CBox_Memory.setItemText(0,_translate("MainWindow", "0"))
self.CBox_Memory.setToolTip(_translate("MainWindow", "Value used memorized"))
#
self.DS_Value_Angle_Dimension.setToolTip(_translate("MainWindow", "Enter the modification"))
self.PB_Negatif.setText(_translate("MainWindow", "Invert"))
self.PB_Apply.setToolTip(_translate("MainWindow", "Apply the modification"))
self.PB_Apply.setText(_translate("MainWindow", "Apply"))
self.label_00.setText(_translate("MainWindow", " Select one Object or give one value Angle/Dimension"))
#self.label_00.setToolTip("Display the modification Axis and Rotation or Position")
####
self.groupBox_Data.setTitle(_translate("MainWindow", "Data"))
self.PB_Save_Memorize.setText(_translate("MainWindow", "Save"))
self.PB_Save_Memorize.setToolTip(_translate("MainWindow", "Save the memorized placement" + "\n"
"Format to save : [Placement.Base], [Placement.Rotation.toEuler]" + "\n"
"Ex: [0.0,0.0,0.0],[0.0,0.0,0.0] with the ext: .CoorInfo" + "\n"
"If the file exist, the data is saved in Append (adding) mode" + "\n"
"If the CheckBox is checked for a Macro the file is saved in Write mode"))
self.PB_ClearMemo.setText(_translate("MainWindow", "Clear"))
self.PB_ClearMemo.setToolTip(_translate("MainWindow", "Clear the memo data" + "\n"
"The Reset button is not actif for this option"))
self.PB_Delete_Line_Memory.setText(_translate("MainWindow", "Delete"))
self.PB_Delete_Line_Memory.setToolTip(_translate("MainWindow", "Delete the line selected"))
self.PB_Memorize.setText(_translate("MainWindow", "Memorize"))
self.PB_Memorize.setToolTip(_translate("MainWindow", "Memorize the placement displayed"))
self.CB_DataInMacro.setText(_translate("MainWindow", "Macro"))
self.CB_DataInMacro.setToolTip(_translate("MainWindow", "If checked, the coordinate is saved in Python code (complete macro) in your Macro directory" + "\n"
"Actual : " + path + "\n"
"Select the object and run the macro" + "\n"
"\t" + "The macro saved has various options :" + "\n"
"\t" + " (Q)uit, (D)ecrease, (I)ncrease, (P)ause, (S)tep, (M)emo" + "\n"
"If this is not checked, the data hare saved in coordinate mode" + "\n"
"\t" + "Ex: [0.0,0.0,0.0],[0.0,0.0,0.0] with the ext: .CoorInfo" + "\n"))
self.CB_On_Click_Apply.setText(_translate("MainWindow", "Memo on click"))
self.CB_On_Click_Apply.setToolTip(_translate("MainWindow", "Memorize the coordinates on all Click Apply button"))
####
self.groupBox_Command.setTitle(_translate("MainWindow", "Command"))
self.PB_Quit.setText(_translate("MainWindow", "Quit"))
self.PB_Quit.setToolTip(_translate("MainWindow", "Quite the macro"))
self.PB_Original.setText(_translate("MainWindow", "Original"))
self.PB_Original.setToolTip(_translate("MainWindow", "Move the object to the original position"))
self.PB_Reset.setText(_translate("MainWindow", "Reset"))
self.PB_Reset.setToolTip(_translate("MainWindow", "Reset the complete data macro"))
self.PB_Zero.setText(_translate("MainWindow", "0,0,0"))
self.PB_Zero.setToolTip(_translate("MainWindow", "Move the object to the base coordinates 0, 0, 0"))
def on_DS_Pos_Mouse_X(self,val):
global positionMouse
global axisX
positionMouse = [val, positionMouse[1], positionMouse[2]]
axisX = positionMouse[0]
self.DS_Pos_Mouse_X.setValue(axisX)
# print("on_DS_Pos_Mouse_X ", val)
def on_DS_Pos_Mouse_Y(self,val):
global positionMouse
global axisY
positionMouse = [positionMouse[0], val, positionMouse[2]]
axisY = positionMouse[1]
self.DS_Pos_Mouse_Y.setValue(axisY)
# print("on_DS_Pos_Mouse_Y ", val)
def on_DS_Pos_Mouse_Z(self,val):
global positionMouse
global axisZ
positionMouse = [positionMouse[0], positionMouse[1], val]
axisZ = positionMouse[2]
self.DS_Pos_Mouse_Z.setValue(axisZ)
# print("on_DS_Pos_Mouse_Z ", val)
# def on_SC_Slider_Bar(self,val):
# global ui
# global valeur
# global myObject
#
# if (myObject != "") and (self.CB_Free.isChecked()):
# valeur = val
# self.DS_Value_Angle_Dimension.setValue(1)
# self.SC_Slider_Bar.setValue(valeur)
# ui.on_PB_Apply_clicked()
#
## if self.CB_Free.isChecked():
## ui.on_PB_Apply_clicked()
## else:
## self.DS_Value_Angle_Dimension.setValue(0.0)
## self.SC_Slider_Bar.setValue(0.0)
# print("on_SC_Scroll_Bar ", valeur)
def on_PB_Delete_Line_Memory(self): #self.TE_Memorize #QListView
global countMemory
global saveOnDisk
self.model = model = QtGui.QStandardItemModel()
try:
self.PB_Delete_Line_Memory.setStyleSheet("Base")
lineSelected = self.TE_Memorize.selectionModel().selectedRows()[0].row()
#textLigne = self.TE_Memorize.selectionModel().currentIndex().data() # affiche la ligne selectionnee
self.TE_Memorize.model().removeRow(lineSelected)
del saveOnDisk[lineSelected]
countMemory -= 1
self.PB_Memorize.setText("Memo (" + str(countMemory) + ")")
except Exception:
self.PB_Delete_Line_Memory.setStyleSheet("background-color: rgb(255, 0, 0)")
# print("on_PB_Delete_Line_Memory ")
def on_TE_Clicked(self, index): # click dans la fenetre
global saveOnDisk
global saveListView
global memorySelected
####ori colore la ligne######
# item = saveListView.itemFromIndex(index)
# item.setBackground(QtGui.QBrush(QtGui.QColor("#ef1919")))
# if (item.index().row()) in memorySelected:
## memorySelected.remove(item.index().row())
# baseBackground = self.TE_Memorize.palette().color(QPalette.Window)
# item.setBackground(QtGui.QBrush(QtGui.QColor(baseBackground)))
# else:
# memorySelected.append(item.index().row())
## print(memorySelected)
####ori colore la ligne######
item = saveListView.itemFromIndex(index)
memorySelected = []
memorySelected.append(item.index().row())
# print("on_TE_Clicked ",memorySelected[0]) #self.TE_Memorize
def on_PB_PointCenter(self):
global objectPlacementAngle
try:
sel = FreeCADGui.Selection.getSelection()
placementOrigine = objectRealPlacement3D(FreeCAD.ActiveDocument.getObject(sel[0].Name))# search the original Placement
Part.show(FreeCADGui.Selection.getSelectionEx()[0].SubObjects[0].copy()) # create repro shape subObject
a = App.ActiveDocument.ActiveObject
a.Placement.Base = placementOrigine
a.Placement.Rotation = App.Rotation(objectPlacementAngle[0], objectPlacementAngle[1], objectPlacementAngle[2])
point = Draft.makePoint(a.Shape.BoundBox.Center)
App.ActiveDocument.ActiveObject.recompute()
#App.ActiveDocument.ActiveObject.touch()
App.ActiveDocument.ActiveObject.purgeTouched()
except Exception:
self.PB_PointCenter.setStyleSheet("background-color: red")
try:
App.ActiveDocument.removeObject(a.Name)
except Exception:
None
# print("on_PB_PointCenter")
def on_PB_Memorize(self):
global myObject
global myObjectName
global saveOnDisk
global saveListView
global countMemory
global valeur
# if (valeur != 0):
self.PB_Memorize.setIcon(QtGui.QIcon(QtGui.QPixmap(memo_Allume_Icon))) # icone dans une variable
countMemory += 1
xPB = str(myObject.Placement.Base[0])
yPB = str(myObject.Placement.Base[1])
zPB = str(myObject.Placement.Base[2])
xPR = str(myObject.Placement.Rotation.toEuler()[0])
yPR = str(myObject.Placement.Rotation.toEuler()[1])
zPR = str(myObject.Placement.Rotation.toEuler()[2])
#####
# #myObjectName , [(3.7,0.0,41.8), (0.0,3.0,0.0)],
# #nomObjet , Placement.Base , Placement.Rotation.toEuler()
dummy = '["' + str(myObjectName) + '",' + "("+xPB+","+yPB+","+zPB+"),("+xPR+","+yPR+","+zPR+")],"
####
saveOnDisk.append(dummy)
self.PB_Memorize.setText("Memo (" + str(countMemory) + ")")
self.PB_Memorize.setStyleSheet("background-color: rgb(188, 245, 169)"); # bouton
self.PB_Delete_Line_Memory.setStyleSheet("Base")
item = QtGui.QStandardItem(dummy)
saveListView.appendRow(item)
# else:
# self.PB_Memorize.setStyleSheet("background-color: #ff0000;")
# self.PB_Memorize.setIcon(QtGui.QIcon(QtGui.QPixmap(memo_Eteint_Icon))) # icone dans une variable
## print("on_PB_Memorize ",saveListView," ",str(countMemory))
def on_PB_Save_Memorize(self): # Save_Memorize in macro file
global pathFile
global saveOnDisk
global countMemory
global path
if countMemory != 0:
if self.CB_DataInMacro.isChecked():
# SaveName, Filter = PySide2.QtWidgets.QFileDialog.getSaveFileName(None, "Save a file FCMacro", path, "FCMacro (*.FCMacro);;Python (*.py)") # PySide2
nomMacro = FreeCAD.ActiveDocument.Name
SaveName, Filter = PySide2.QtWidgets.QFileDialog.getSaveFileName(None, "Save a file FCMacro", path + nomMacro, "(*.FCMacro);;Python (*.py)") # PySide2
else:
SaveName, Filter = PySide2.QtWidgets.QFileDialog.getSaveFileName(None, "Save a file CoorInfo", pathFile, "CoorInfo (*.CoorInfo);;Ascii (*.asc);;TXT (*.txt)") # PySide2
if SaveName == "": # if the name file are not selected then Abord process
App.Console.PrintMessage("Process aborted"+"\n")
else: # if the name file are selected or created then
####new2
pathFile = os.path.dirname(SaveName) + "/" #= C:/Provisoire400/
formatFichier = os.path.splitext(SaveName)[1] #= .png
SaveName = os.path.splitext(SaveName)[0] #= /home/kubuntu/.FreeCAD/Macro/Texture_007_H #= C:/Provisoire400/image3D
SaveNameformatFichier = SaveName + formatFichier #= C:/Provisoire400/image3D.png
####new2
######## sauve le dernier chemin utilise si n'est pas une macro########
if self.CB_DataInMacro.isChecked():
None
else:
FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macros/FCMmacros/" + __title__).SetString("setLastPath",pathFile)
######## sauve le dernier chemin utilise si n'est pas une macro########
App.Console.PrintMessage("Registration of "+SaveNameformatFichier+"\n")
try:
if self.CB_DataInMacro.isChecked():
file = open(SaveNameformatFichier, 'w') #'w'write
else:
file = open(SaveNameformatFichier, 'a') #'a'append
try:
#### macro first section begin
if self.CB_DataInMacro.isChecked():
file.write("# -*- coding: utf-8 -*-" + "\n")
file.write("##" + "\n")
try:
nameAuthor = str(unicodedata.normalize('NFD', __author__).encode('ascii','ignore'))
except Exception: nameAuthor = "Sir X"
try:
file.write("##Created by : " + __title__ + " : " + __version__ + ":" + __date__ + " : " + nameAuthor + "\n")
file.write("##Document : " + FreeCAD.ActiveDocument.Name + "\n")
#file.write("##Date : " + str(QDate.currentDate().toString()) + "\n") # mer. mars 3 2021
file.write("##Date : " + str(QDate.currentDate().toString("yyyy/MM/dd")) + " # yyyy/MM/dd" + "\n")
file.write("##Object(First): " + str(FreeCADGui.Selection.getSelection()[0].Name) + "\n")
file.write("##Coordinates : " + str(countMemory) + "\n")
file.write("##" + "\n")
except Exception: None
file.write("import Draft, Part" + "\n")
file.write("import PySide2" + "\n")
file.write("from pivy import coin" + "\n")
file.write("import time, os" + "\n")
file.write("" + "\n")
file.write("import FreeCAD, FreeCADGui" + "\n")
file.write("App = FreeCAD" + "\n")
file.write("Gui = FreeCADGui" + "\n")
file.write("" + "\n")
file.write("global Document; Document = " + chr(34) + FreeCAD.ActiveDocument.Name + chr(34) + "\n")
file.write("global xxData ; xxData = [] " + "\n")
file.write("global xxKey ; xxKey = " + chr(34) + chr(34) + "\n")
file.write("global v, o, c" + "\n")
file.write("global vitesse ; vitesse = 0.02" + "\n")
file.write("" + "\n")
file.write("def help():" + "\n")
file.write(" global xxData" + "\n")
file.write(" global Document" + "\n")
file.write(' App.Console.PrintMessage("__' + FreeCAD.ActiveDocument.Name + '__"+"' + chr(92) + 'n")' + "\n")
file.write(' App.Console.PrintMessage("__" + str(len(xxData)) + " Coordinates__"+"' + chr(92) + 'n")' + "\n")
file.write(' App.Console.PrintMessage("Type Key Q to Quit"+"' + chr(92) + 'n")' + "\n")
file.write(' App.Console.PrintMessage("Type Key D to Decrease speed"+"' + chr(92) + 'n")' + "\n")
file.write(' App.Console.PrintMessage("Type Key I to Increase speed"+"' + chr(92) + 'n")' + "\n")
file.write(' App.Console.PrintMessage("Type Key P to Pause/Continue or key RETURN or ESCAPE"+"' + chr(92) + 'n")' + "\n")
file.write(' App.Console.PrintMessage("Type Key S to Step by Step (key RETURN or ESCAPE to continue)"+"' + chr(92) + 'n")' + "\n")
file.write(' App.Console.PrintMessage("Type Key R to Reverse"+"' + chr(92) + 'n")' + "\n")
file.write(' App.Console.PrintMessage("Type Key M for this message"+"' + chr(92) + 'n")' + "\n")
file.write(' App.Console.PrintMessage("____________________________"+"' + chr(92) + 'n")' + "\n")
file.write('\n')
file.write('class ViewObserver:' + "\n")
file.write(' def logPosition(self, info):' + "\n")
file.write(' global xxKey' + "\n")
file.write(' global v, o, c' + "\n")
file.write(' global vitesse' + "\n")
file.write('' + "\n")
file.write(' xxKey = info["Key"].upper()' + "\n")
file.write(' if xxKey in "QIDPSRM" or xxKey == "RETURN" or xxKey == "PAD_ENTER" or xxKey == "ESCAPE":' + "\n")
file.write(' if (xxKey == "Q"): # Quit' + "\n")
file.write(' v.removeEventCallback("SoKeyboardEvent",c)' + "\n")
file.write(' FreeCAD.Console.PrintMessage("End " + Document + "' + chr(92) + 'n")' + "\n")
file.write('' + "\n")
file.write(' if (xxKey == "I"): # Increase' + "\n")
file.write(' vitesse -= 0.01' + "\n")
file.write(' if vitesse <= 0:' + "\n")
file.write(' vitesse = 0' + "\n")
file.write(' App.Console.PrintMessage("Speed maximum"+"' + chr(92) + 'n")' + "\n")
file.write(' else:' + "\n")
file.write(' App.Console.PrintMessage(str(vitesse)+"' + chr(92) + 'n")' + "\n")
file.write('' + "\n")
file.write(' if (xxKey == "D"): # Decrease' + "\n")
file.write(' vitesse += 0.01' + "\n")
file.write(' App.Console.PrintMessage(str(vitesse)+"' + chr(92) + 'n")' + "\n")
file.write('' + "\n")
file.write(' if (xxKey == "R"): # Reverse' + "\n")
file.write(' xxData.reverse()' + "\n")
file.write('' + "\n")
file.write(' if (xxKey == "M"): # Help memo' + "\n")
file.write(' help()' + "\n")
file.write('##Begin of file' + "\n")
file.write('xxData = [' + "\n")
#### macro first section end
#### save data
for i in saveOnDisk:
file.write(i + "\n")
#### save data
#### macro second section begin
if self.CB_DataInMacro.isChecked():
file.write(']' + "\n")
file.write('##End of file' + "\n")
file.write('' + "\n")
file.write('createPoint = 0 # 0=not point 1=create point #used by "S" :Step to Step' + "\n")
file.write('try:' + "\n")
file.write(' v = Gui.activeDocument().activeView()' + "\n")
file.write(' o = ViewObserver()' + "\n")
file.write(' c = v.addEventCallback("SoKeyboardEvent",o.logPosition)' + "\n")
file.write('' + "\n")
file.write(' ##Select the object' + "\n")
file.write(' ##myObject = FreeCADGui.Selection.getSelection()[0] #select the object' + "\n")
file.write(' help() #help message' + "\n")
file.write('' + "\n")
file.write(' ##Loop' + "\n")
file.write(' while xxKey != "Q":' + "\n")
file.write(' comptCoordinate = -1 # coordinte 0 to ...x' + "\n")
file.write(' for p in xxData:' + "\n")
file.write(' #if (xxKey == "Q"): break # Quit the loop after finish the complete loop (commented by default: if used quit the loop as is)' + "\n")
file.write(' comptCoordinate += 1' + "\n")
file.write(' ## p[1]=Coordinate x,y,z; p[2]=Rotation angle x (Roll), y (Pitch), z (Yaw)' + "\n")
file.write(' px = float(p[1][0]); rx = float(p[2][0])' + "\n")
file.write(' py = float(p[1][1]); ry = float(p[2][1])' + "\n")
file.write(' pz = float(p[1][2]); rz = float(p[2][2])' + "\n")
file.write(' App.ActiveDocument.getObject(p[0]).Placement=App.Placement(App.Vector(px,py,pz), App.Rotation(rx,ry,rz), App.Vector(0,0,0))' + "\n")
file.write(' Gui.updateGui() # rafraichi l''ecran' + "\n")
file.write(' time.sleep(vitesse)' + "\n")
file.write('' + "\n")
file.write(' if xxKey == "P": # Pause' + "\n")
file.write(' xxKey = ""' + "\n")
file.write(' comptLoop = 0' + "\n")
file.write(' while xxKey != "P":' + "\n")
file.write(' if xxKey == "RETURN" or xxKey == "PAD_ENTER" or xxKey == "ESCAPE": break' + "\n")
file.write(' comptLoop += 1' + "\n")
file.write(' if comptLoop > 50000:' + "\n")
file.write(' comptLoop = 0' + "\n")
file.write(' App.Console.PrintError("You is in mode Pause : Type P or RETURN or ESCAPE to continue" + "' + chr(92) + 'n")' + "\n")
file.write(' Gui.updateGui() # rafraichi l''ecran' + "\n")
file.write(' xxKey = ""' + "\n")
file.write('' + "\n")
file.write(' if xxKey == "S": # Step by Step' + "\n")
file.write(' App.Console.PrintMessage(str(App.ActiveDocument.getObject(p[0]).Placement) + " #(" + str(comptCoordinate) + ")" + "' + chr(92) + 'n")' + "\n")
file.write(' ####' + "\n")
file.write(' if createPoint == 1:' + "\n")
file.write(' point = Draft.makePoint(App.ActiveDocument.getObject(p[0]).Placement.Base) # create point to Placement.Base' + "\n")
file.write(' Draft.autogroup(point) #' + "\n")
file.write(' FreeCAD.ActiveDocument.recompute() #' + "\n")
file.write(' ####' + "\n")
file.write(' xxKey = ""' + "\n")
file.write(' while xxKey != "S":' + "\n")
file.write(' if xxKey == "RETURN" or xxKey == "PAD_ENTER" or xxKey == "ESCAPE": break' + "\n")
file.write(' xxKey = ""' + "\n")
file.write(' Gui.updateGui() # rafraichi l''ecran' + "\n")
file.write('' + "\n")
file.write('except Exception:' + "\n")
file.write(' FreeCAD.Console.PrintError("' + chr(92) + 'n"+"Not document open, or not object selected" + "' + chr(92) + 'n")' + "\n")
file.write(' try:' + "\n")
file.write(' v.removeEventCallback("SoKeyboardEvent",c)' + "\n")
file.write(' except Exception:' + "\n")
file.write(' None' + "\n")
file.write('' + "\n")
#### macro second section end
except Exception:
self.label_00.setStyleSheet("color : #ffffff; background-color: red; font: bold 10px;") # white red bold
self.label_00.setText(" Error write file")
# App.Console.PrintError("Error write file "+"\n")
finally:
file.close()
except Exception:
self.label_00.setStyleSheet("color : #ffffff; background-color: red; font: bold 10px;") # white red bold
self.label_00.setText(" Error Write file " + SaveName)
# App.Console.PrintError("Error Write file " + SaveName+"\n")
# print("on_PB_Save_Memorize")
def on_PB_ClearMemo(self):
global saveOnDisk
global saveListView
global countMemory
global memorySelected
try:
model = saveListView = QtGui.QStandardItemModel()
self.TE_Memorize.model().removeRows(0, countMemory)# model.rowCount()
saveOnDisk = []
self.TE_Memorize.setModel(saveListView)
countMemory = 0
memorySelected = []
self.PB_Memorize.setText("Memo")
self.PB_Memorize.setStyleSheet("Base")
self.PB_Memorize.setIcon(QtGui.QIcon(QtGui.QPixmap(memo_Eteint_Icon))) # icone dans une variable
except Exception:
None
# print("on_PB_ClearMemo")
def on_CB_On_Click_Apply(self):
if self.CB_On_Click_Apply.isChecked():
self.CB_On_Click_Apply.setIcon(QtGui.QIcon(QtGui.QPixmap(normalWork_Icon))) # icone dans une variable
self.CB_On_Click_Apply.setText(u"Memo on demand")
self.CB_On_Click_Apply.setToolTip(u"Memorize the coordinates on demand")
self.PB_Memorize.setIcon(QtGui.QIcon(QtGui.QPixmap(memo_Allume_Icon))) # icone dans une variable
self.groupBox_Data.setEnabled(True)
else:
self.CB_On_Click_Apply.setIcon(QtGui.QIcon(QtGui.QPixmap(OnClickApply_Icon))) # icone dans une variable
self.CB_On_Click_Apply.setText(u"Memo on click")
self.CB_On_Click_Apply.setToolTip(u"Memorize the coordinates on all Click Apply button")
# print("on_CB_On_Click_Apply")
def On_CB_DataInMacro(self):
if self.CB_DataInMacro.isChecked():
self.CB_DataInMacro.setIcon(QtGui.QIcon(QtGui.QPixmap(code_FC_Icon))) # icone dans une variable
self.CB_DataInMacro.setText(u"Coordinate")
self.PB_Save_Memorize.setText("Save (wr)")
self.PB_Save_Memorize.setToolTip("The file is open in mode Write" + "\n"
"If the file exist, the file is crushed" + "\n"
"")
else:
self.CB_DataInMacro.setIcon(QtGui.QIcon(QtGui.QPixmap(code_Python_Icon))) # icone dans une variable
self.CB_DataInMacro.setText(u"Macro")
self.PB_Save_Memorize.setText("Save (ap)")
self.PB_Save_Memorize.setToolTip("The file is open in mode Append" + "\n"
"If the file exist, the the data hare adding in the file" + "\n"
"")
# print("On_CB_DataInMacro")
def on_DS_Value_Angle_Dimension(self,val):
global valeur
global myObject
global axisX, axisY, axisZ
global posX, posY, posZ
global rotAngleX, rotAngleY, rotAngleZ
valeur = val
if (myObject == "") or (valeur == 0):
self.PB_Memorize.setIcon(QtGui.QIcon(QtGui.QPixmap(memo_Eteint_Icon))) # icone dans une variable
self.DS_Value_Angle_Dimension.setValue(0.0)
self.DS_Value_Angle_Dimension.setStyleSheet("background-color: rgb(250, 88, 88)")
# self.SC_Slider_Bar.setValue(0.0)
None
else:
self.PB_Memorize.setIcon(QtGui.QIcon(QtGui.QPixmap(memo_Allume_Icon))) # icone dans une variable
self.DS_Value_Angle_Dimension.setStyleSheet("Base")
self.PB_Memorize.setStyleSheet("Base")
# self.SC_Slider_Bar.setValue(valeur)
if self.CB_Position.isChecked(): # translate
if self.RB_Rotation_X.isChecked():
posX = valeur
posY = posZ = 0.0
self.LE_Increment.setText(str(round(myObject.Placement.Base[0],4) + valeur))
elif self.RB_Rotation_Y.isChecked():
posY = valeur
posX = posZ = 0.0
self.LE_Increment.setText(str(round(myObject.Placement.Base[1],4) + valeur))
elif self.RB_Rotation_Z.isChecked():
posZ = valeur
posX = posY = 0.0
self.LE_Increment.setText(str(round(myObject.Placement.Base[2],4) + valeur))
elif self.RB_Direction_D.isChecked():
posZ = valeur
posX = posY = 0.0
xD = str(round(myObject.Placement.Base[0],4))
yD = str(round(myObject.Placement.Base[1],4))
zD = str(round(myObject.Placement.Base[2],4))
self.LE_Increment.setText("(" + xD + ", " + yD + ", " + zD + ")")
self.label_00.setText("[Pos=(" + str(round(myObject.Placement.Base[0],2))+" , " +
str(round(myObject.Placement.Base[1],2))+" , " +
str(round(myObject.Placement.Base[2],2))+")] " +
"[Axis=("+ str(round(axisX,2)) + " , " + str(round(axisY,2)) + " , " + str(round(axisZ,2)) + ")]")
else: # rotation
if self.RB_Rotation_X.isChecked():
rotAngleX = valeur
rotAngleY = rotAngleZ = 0.0
self.LE_Increment.setText(str(round(myObject.Placement.Rotation.toEuler()[0],4) + valeur))
elif self.RB_Rotation_Y.isChecked():
rotAngleY = valeur
rotAngleZ = rotAngleX = 0.0
self.LE_Increment.setText(str(round(myObject.Placement.Rotation.toEuler()[1],4) + valeur))
elif self.RB_Rotation_Z.isChecked():
rotAngleZ = valeur
rotAngleX = rotAngleY = 0.0
self.LE_Increment.setText(str(round(myObject.Placement.Rotation.toEuler()[2],4) + valeur))
elif self.RB_Direction_D.isChecked():
rotAngleZ = valeur
rotAngleX = rotAngleY = 0.0
xD = str(round(myObject.Placement.Rotation.toEuler()[0],4))
yD = str(round(myObject.Placement.Rotation.toEuler()[1],4))
zD = str(round(myObject.Placement.Rotation.toEuler()[2],4))
self.LE_Increment.setText("(" + xD + ", " + yD + ", " + zD + ")")
self.label_00.setText("[Rot=(" + str(round(rotAngleX,2)) + " , " + str(round(rotAngleY,2)) + " , " + str(round(rotAngleZ,2)) + ")] " +
"[Axis=("+ str(round(axisX,2)) + " , " + str(round(axisY,2)) + " , " + str(round(axisZ,2)) + ")]")
# print("on_DS_Value_Angle_Dimension ", valeur)
def on_PB_Negatif_clicked(self):
if valeur < 0:
self.PB_Negatif.setIcon(QtGui.QIcon(QtGui.QPixmap(negatif_Icon))) # icone dans une variable
else:
self.PB_Negatif.setIcon(QtGui.QIcon(QtGui.QPixmap(positif_Icon))) # icone dans une variable
self.DS_Value_Angle_Dimension.setValue(-valeur) # !?
# print("on_PB_Negatif_clicked")
def on_CBox_View(self,text): # memory view on object worked
global duplicate_View
global myObjectName
global switchZoomOnCilck
if text == "Empty":
#duplicate_View = sorted(list(set(duplicate_View))) # trie et tire les doublons
duplicate_View = sorted(duplicate_View, key=itemgetter(0)) # sort
try: # supprime les doublons apres avoir ete trie (sorted)
doublon = 1
while doublon < len(duplicate_View):
if (duplicate_View[doublon][0] == duplicate_View[doublon-1][0]):
del duplicate_View[doublon-1]
doublon -= 1
doublon += 1
except Exception:
None
self.CBox_View.blockSignals(True)
self.CBox_View.clear()
for i in range(len(duplicate_View)): # copie les noms tries dans ComboBox_View
self.CBox_View.addItem(duplicate_View[i][0])
self.CBox_View.blockSignals(False)
#self.CBox_View.setItemText(0,_translate("MainWindow", "0"))
else:
for i in range(len(duplicate_View)):
if text == duplicate_View[i][0]:
Gui.ActiveDocument.ActiveView.setCamera(duplicate_View[i][1]) #restore previously stored camera settings
##camera = Gui.ActiveDocument.ActiveView.getCamera() #store camera settings to 'cam'
# print("on_CBox_View ",text)
def on_CBox_Impost(self,text): # value length and degrees
if self.CB_Position.isChecked():
self.CBox_Impost.setCurrentIndex(4)
self.CBox_Impost.setItemText(0, "0.0001")
self.CBox_Impost.setItemText(1, "0.001")
self.CBox_Impost.setItemText(2, "0.01")
self.CBox_Impost.setItemText(3, "0.1")
self.CBox_Impost.setItemText(4, "0")
self.CBox_Impost.setItemText(5, "1")
self.CBox_Impost.setItemText(6, "5")
self.CBox_Impost.setItemText(7, "10")
self.CBox_Impost.setItemText(8, "25")
self.CBox_Impost.setItemText(9, "50")
self.CBox_Impost.setItemText(10, "100")
self.CBox_Impost.setItemText(11, "250")
self.CBox_Impost.setItemText(12, "500")
self.CBox_Impost.setItemText(13, "1000")
self.CBox_Impost.setItemText(14, "5000")
self.CBox_Impost.setItemText(15, "10000")
else:
self.CBox_Impost.setCurrentIndex(4)
self.CBox_Impost.setItemText(0, "0.0001")
self.CBox_Impost.setItemText(1, "0.001")
self.CBox_Impost.setItemText(2, "0.01")
self.CBox_Impost.setItemText(3, "0.1")
self.CBox_Impost.setItemText(4, "0")
self.CBox_Impost.setItemText(5, "1")
self.CBox_Impost.setItemText(6, "5")
self.CBox_Impost.setItemText(7, "10")
self.CBox_Impost.setItemText(8, "20")
self.CBox_Impost.setItemText(9, "30")
self.CBox_Impost.setItemText(10, "40")
self.CBox_Impost.setItemText(11, "45")
self.CBox_Impost.setItemText(12, "60")
self.CBox_Impost.setItemText(13, "90")
self.CBox_Impost.setItemText(14, "120")
self.CBox_Impost.setItemText(15, "180")
self.DS_Value_Angle_Dimension.setProperty("value", text)
# print("on_CBox_Impost ",text)
def on_CBox_Memory(self,text): # memory the value sort and delete duplicate
global duplicate_Memory
self.DS_Value_Angle_Dimension.setValue(float(text))
duplicate_Memory.append(float(text))
duplicate_Memory = sorted(list(set(duplicate_Memory))) # sort
self.CBox_Memory.blockSignals(True)
self.CBox_Memory.clear()
for i in range(len(duplicate_Memory)):
self.CBox_Memory.addItem(str(duplicate_Memory[i]))
self.CBox_Memory.blockSignals(False)
# print("on_CBox_Memory ",text)
def on_LE_Increment_Pressed(self,text):
None
# print("on_LE_Increment_Pressed")
def on_PB_Apply_clicked(self):
global valeur
global selM
global myObject
global myObjectName
global duplicate_View
global axisX, axisY, axisZ
global posX, posY, posZ
global rotAngleX, rotAngleY, rotAngleZ
if (myObject == "") or (valeur == 0):
self.label_00.setStyleSheet("color : #ffffff; background-color: red; font: bold 10px;") # white red bold
self.label_00.setText(" Select one Object or give one value Angle/Dimension")
# FreeCAD.Console.PrintError("Select one Object or give one value Angle/Dimension" + "\n")
self.PB_Memorize.setIcon(QtGui.QIcon(QtGui.QPixmap(memo_Eteint_Icon))) # icone dans une variable
if valeur == 0:
self.DS_Value_Angle_Dimension.setStyleSheet("background-color: rgb(250, 88, 88)")
else:
self.PB_Memorize.setIcon(QtGui.QIcon(QtGui.QPixmap(memo_Allume_Icon))) # icone dans une variable
#Gui.ActiveDocument.ActiveView.setCamera(camera) #restore previously stored camera settings
camera = Gui.ActiveDocument.ActiveView.getCamera() #store camera settings to 'cam'
duplicate_View.append([myObjectName, camera])
self.on_CBox_View("Empty")
self.on_CBox_Memory(self.DS_Value_Angle_Dimension.value())
if self.CB_Position.isChecked(): # translate
if self.RB_Direction_D.isChecked(): # direction
try:
selectedEdge = FreeCADGui.Selection.getSelectionEx()[1].SubObjects[0] # select one element and axis second object (2 selections)
except Exception:
try:
selectedEdge = FreeCADGui.Selection.getSelectionEx()[0].SubObjects[1] # select one element and axis same object (2 selections)
except Exception:
try:
selectedEdge = FreeCADGui.Selection.getSelectionEx()[0].SubObjects[0] # select one element and axis same object (1 selection)
except Exception:
None
pointsTrajet = []
try:
pointsTrajet = selectedEdge.discretize(Distance = 1.0) # discretize the element
except Exception:
direction = myObject.Vertexes[0].Point
pointsTrajet = direction
None
try:
direction = pointsTrajet[1].sub(pointsTrajet[0]) # search the direction line or sub
except Exception:
try:
direction = myObject.Vertexes[0].Point # direction point
except Exception:
direction = App.Vector(0.0,0.0,0.0)
selM.Placement.Base = myObject.Placement.Base + App.Vector(direction).scale(valeur, valeur, valeur)
else:
selM.Placement = App.Placement(App.Vector(posX, posY, posZ), App.Rotation(0.0,0.0,0.0), App.Vector(0.0,0.0,0.0)).multiply(App.ActiveDocument.getObject(myObjectName).Placement)
myObject = selM
if self.RB_Rotation_X.isChecked():
self.LE_Increment.setText(str(round(myObject.Placement.Base[0],4)))
elif self.RB_Rotation_Y.isChecked():
self.LE_Increment.setText(str(round(myObject.Placement.Base[1],4)))
elif self.RB_Rotation_Z.isChecked():
self.LE_Increment.setText(str(round(myObject.Placement.Base[2],4)))
elif self.RB_Direction_D.isChecked():
xD = str(round(myObject.Placement.Base[0],4))
yD = str(round(myObject.Placement.Base[1],4))
zD = str(round(myObject.Placement.Base[2],4))
self.LE_Increment.setText("(" + xD + ", " + yD + ", " + zD + ")")
self.label_00.setText("[Pos=(" + str(round(myObject.Placement.Base[0],2))+" , " +
str(round(myObject.Placement.Base[1],2))+" , " +
str(round(myObject.Placement.Base[2],2))+")] " +
"[Axis=("+ str(round(axisX,2)) + " , " + str(round(axisY,2)) + " , " + str(round(axisZ,2)) + ")]")
else: # rotation
if self.RB_Direction_D.isChecked(): # direction
try:
selectedEdge = FreeCADGui.Selection.getSelectionEx()[1].SubObjects[0] # select one element and axis second object (2 selections)
except Exception:
try:
selectedEdge = FreeCADGui.Selection.getSelectionEx()[0].SubObjects[1] # select one element and axis same object (2 selections)
except Exception:
try:
selectedEdge = FreeCADGui.Selection.getSelectionEx()[0].SubObjects[0] # select one element and axis same object (1 selection)
except Exception:
None
try:
direction = selectedEdge.Vertexes[1].Point.sub(selectedEdge.Vertexes[0].Point)# search the direction line or sub
except Exception:
try:
direction = objectRotation.Vertexes[0].Point
except Exception:
direction = App.Vector(0.0,0.0,0.0)
selM.Placement = App.Placement(App.Vector(0.0,0.0,0.0), App.Rotation(App.Vector(direction), valeur), App.Vector(axisX, axisY, axisZ)).multiply(App.ActiveDocument.getObject(myObjectName).Placement)
else:
selM.Placement = App.Placement(App.Vector(0.0,0.0,0.0), App.Rotation(rotAngleX, rotAngleY, rotAngleZ), App.Vector(axisX, axisY, axisZ)).multiply(App.ActiveDocument.getObject(myObjectName).Placement) # other method
myObject = selM
if self.RB_Rotation_X.isChecked():
self.LE_Increment.setText(str(round(myObject.Placement.Rotation.toEuler()[0],4)))
elif self.RB_Rotation_Y.isChecked():
self.LE_Increment.setText(str(round(myObject.Placement.Rotation.toEuler()[1],4)))
elif self.RB_Rotation_Z.isChecked():
self.LE_Increment.setText(str(round(myObject.Placement.Rotation.toEuler()[2],4)))
elif self.RB_Direction_D.isChecked():
xD = str(round(myObject.Placement.Rotation.toEuler()[0],4))
yD = str(round(myObject.Placement.Rotation.toEuler()[1],4))
zD = str(round(myObject.Placement.Rotation.toEuler()[2],4))
self.LE_Increment.setText("(" + xD + ", " + yD + ", " + zD + ")")
self.label_00.setText("[Rot=(" + str(round(myObject.Placement.Rotation.toEuler()[0],2)) + " , " +
str(round(myObject.Placement.Rotation.toEuler()[1],2)) + " , " +
str(round(myObject.Placement.Rotation.toEuler()[2],2)) + ")] " +
"[Axis=("+ str(round(axisX,2))+" , "+ str(round(axisY,2))+" , "+ str(round(axisZ,2))+")]")
if self.CB_On_Click_Apply.isChecked():
self.on_PB_Memorize()
# FreeCAD.ActiveDocument.recompute()
# print("on_PB_Apply_clicked")
def on_RB_Rotation_0(self):
None
# print("on_RB_Rotation_0")
def on_RB_Rotation_X(self):
global myObject
if self.CB_Position.isChecked():
self.LE_Increment.setText(str(round(myObject.Placement.Base[0],4))) # pos X
else:
self.LE_Increment.setText(str(round(myObject.Placement.Rotation.toEuler()[0],4))) # yaw = Z
self.DS_Value_Angle_Dimension.setValue(0.0)
# print("on_RB_Rotation_X")
def on_RB_Rotation_Y(self):
global myObject
if self.CB_Position.isChecked():
self.LE_Increment.setText(str(round(myObject.Placement.Base[1],4))) # pos Y
else:
self.LE_Increment.setText(str(round(myObject.Placement.Rotation.toEuler()[1],4))) # pitch= Y
self.DS_Value_Angle_Dimension.setValue(0.0)
# print("on_RB_Rotation_Y")
def on_RB_Rotation_Z(self):
global myObject
if self.CB_Position.isChecked():
self.LE_Increment.setText(str(round(myObject.Placement.Base[2],4))) # pos Z
else:
self.LE_Increment.setText(str(round(myObject.Placement.Rotation.toEuler()[2],4))) # roll = X
self.DS_Value_Angle_Dimension.setValue(0.0)
# print("on_RB_Rotation_Z")
def on_RB_Direction_D(self):
global myObject
if self.CB_Position.isChecked():
xD = str(round(myObject.Placement.Base[0],4))
yD = str(round(myObject.Placement.Base[1],4))
zD = str(round(myObject.Placement.Base[2],4))
else:
xD = str(round(myObject.Placement.Rotation.toEuler()[0],4))
yD = str(round(myObject.Placement.Rotation.toEuler()[1],4))
zD = str(round(myObject.Placement.Rotation.toEuler()[2],4))
self.LE_Increment.setText("(" + xD + ", " + yD + ", " + zD + ")")
self.DS_Value_Angle_Dimension.setValue(0.0)
# print("on_RB_Direction_D")
def on_RB_CenterRot(self): # zero
global myObject
global selM
global positionMouse
global axisX, axisY, axisZ
try:
if hasattr(selM, "Shape"):
sel = selM.Shape
elif hasattr(selM, "Mesh"): # upgrade with wmayer thanks #http://forum.freecadweb.org/viewtopic.php?f=13&t=22331
sel = selM.Mesh
elif hasattr(selM, "Points"):
sel = selM.Points
myObject = sel
self.groupBox_Pos_Mouse.setEnabled(False)
if self.RB_Bond_Box_Center.isChecked(): # axis
axisX = myObject.BoundBox.Center.x
axisY = myObject.BoundBox.Center.y
axisZ = myObject.BoundBox.Center.z
self.label_00.setToolTip("Axis BoundBox.Center")
self.RB_Center_Mass.setStyleSheet("Base")
elif self.RB_Center_Mass.isChecked():
try:
axisX = myObject.CenterOfMass.x
axisY = myObject.CenterOfMass.y
axisZ = myObject.CenterOfMass.z
self.label_00.setToolTip("Axis Center Of Mass")
except Exception: # case Mesh.MeshObject
self.RB_Bond_Box_Center.setChecked(True)
self.RB_Center_Mass.setStyleSheet("background-color: rgb(250, 88, 88)")
elif self.RB_Point_Clicked.isChecked():
axisX = positionMouse[0]
axisY = positionMouse[1]
axisZ = positionMouse[2]
self.groupBox_Pos_Mouse.setEnabled(True)
self.label_00.setToolTip("Point Mouse")
except Exception:
self.label_00.setStyleSheet("color : #ffffff; background-color: red; font: bold 10px;") # white red bold
self.label_00.setText("Error CenterRot_0")
## FreeCAD.Console.PrintError("Error CenterRot_0" + "\n" + "or Bad selection" + "\n")
## print("on_RB_CenterRot")
def on_CB_Position(self):
global myObject
global posX, posY, posZ
global axisX, axisY, axisZ
global ui
self.on_CBox_Impost("")
if self.CB_Position.isChecked():
self.DS_Value_Angle_Dimension.setMinimum(-999999999.999999999)
self.DS_Value_Angle_Dimension.setMaximum(999999999.999999999)
self.DS_Value_Angle_Dimension.setSuffix(" mm")
self.RB_Rotation_Z.setIcon(QtGui.QIcon(QtGui.QPixmap(axis_Z_Icon))) # icone dans une variable
self.RB_Rotation_X.setIcon(QtGui.QIcon(QtGui.QPixmap(axis_X_Icon))) # icone dans une variable
self.CB_Position.setIcon(QtGui.QIcon(QtGui.QPixmap(rotate_Icon))) #icone dans une variable
self.CB_Position.setToolTip(u"UnCheck for rotate the object in axis selected")
self.CB_Position.setText(u"Rotation")
self.CB_Position.setToolTip(u"Rotate the object to axis choice X, Y, Z or D")
self.groupBox_Rotation.setEnabled(False)
self.RB_Bond_Box_Center.setChecked(True)
# self.SC_Slider_Bar.setMinimum(-1000)
# self.SC_Slider_Bar.setMaximum(1000)
# self.DS_Value_Angle_Dimension.setMinimum(-1000)
# self.DS_Value_Angle_Dimension.setMaximum(1000)
self.groupBox_Axis.setTitle("Axis Translation")
self.RB_Rotation_Z.setText("Translation Z ") # translate
self.RB_Rotation_Y.setText("Translation Y ")
self.RB_Rotation_X.setText("Translation X ")
self.RB_Direction_D.setText("Translation D ")
try:
self.label_00.setText("[Pl.Base=(" + str(round(myObject.Placement.Base[0],2)) + " , " +
str(round(myObject.Placement.Base[1],2)) + " , " +
str(round(myObject.Placement.Base[2],2)) + ")] " +
"[Axis=("+ str(round(axisX,2)) + " , " + str(round(axisY,2)) + " , " + str(round(axisZ,2)) + ")]")
if self.RB_Rotation_X.isChecked():
self.LE_Increment.setText(str(round(myObject.Placement.Base[0],4)))
elif self.RB_Rotation_Y.isChecked():
self.LE_Increment.setText(str(round(myObject.Placement.Base[1],4)))
elif self.RB_Rotation_Z.isChecked():
self.LE_Increment.setText(str(round(myObject.Placement.Base[2],4)))
elif self.RB_Direction_D.isChecked():
xD = str(round(myObject.Placement.Base[0],4))
yD = str(round(myObject.Placement.Base[1],4))
zD = str(round(myObject.Placement.Base[2],4))
self.LE_Increment.setText("(" + xD + ", " + yD + ", " + zD + ")")
except Exception:
self.label_00.setStyleSheet("color : #ffffff; background-color: red; font: bold 10px;") # white red bold
self.label_00.setText("Error Position_0 or Bad selection")
## FreeCAD.Console.PrintError("Error Position_0" + "\n" + "or Bad selection" + "\n")
else:
self.DS_Value_Angle_Dimension.setMinimum(-360.0)
self.DS_Value_Angle_Dimension.setMaximum(360.0)
self.DS_Value_Angle_Dimension.setSuffix(" Degrees")
self.RB_Rotation_Z.setIcon(QtGui.QIcon(QtGui.QPixmap(axis_X_Icon))) # icone dans une variable
self.RB_Rotation_X.setIcon(QtGui.QIcon(QtGui.QPixmap(axis_Z_Icon))) # icone dans une variable
self.CB_Position.setIcon(QtGui.QIcon(QtGui.QPixmap(translate_Icon))) #icone dans une variable
self.CB_Position.setText(u"Translation")
self.CB_Position.setToolTip(u"Check for move the object to axis choice X, Y, Z or D")
self.groupBox_Rotation.setEnabled(True)
# self.SC_Slider_Bar.setMinimum(0.0)
# self.SC_Slider_Bar.setMaximum(359.0)
# self.DS_Value_Angle_Dimension.setMinimum(0.0)
# self.DS_Value_Angle_Dimension.setMaximum(359.0)
self.groupBox_Axis.setTitle("Axis Rotation")
self.RB_Rotation_Z.setText("Rotation(X) Roll") # rotation
self.RB_Rotation_Y.setText("Rotation(Y) Pitch")
self.RB_Rotation_X.setText("Rotation(Z) Yaw")
self.RB_Direction_D.setText("Rotation(D)")
try:
self.label_00.setText("[Rot=(" + str(round(myObject.Placement.Rotation.toEuler()[0],2)) + " , " +
str(round(myObject.Placement.Rotation.toEuler()[1],2)) + " , " +
str(round(myObject.Placement.Rotation.toEuler()[2],2)) + ")] " +
"[Axis=("+str(round(axisX,2))+" , "+ str(round(axisY,2))+" , "+ str(round(axisZ,2))+")]")
if self.RB_Rotation_X.isChecked():
self.LE_Increment.setText(str(round(myObject.Placement.Rotation.toEuler()[0],4)))
elif self.RB_Rotation_Y.isChecked():
self.LE_Increment.setText(str(round(myObject.Placement.Rotation.toEuler()[1],4)))
elif self.RB_Rotation_Z.isChecked():
self.LE_Increment.setText(str(round(myObject.Placement.Rotation.toEuler()[2],4)))
elif self.RB_Direction_D.isChecked():
xD = str(round(myObject.Placement.Rotation.toEuler()[0],4))
yD = str(round(myObject.Placement.Rotation.toEuler()[1],4))
zD = str(round(myObject.Placement.Rotation.toEuler()[2],4))
self.LE_Increment.setText("(" + xD + ", " + yD + ", " + zD + ")")
except Exception:
self.label_00.setStyleSheet("color : #ffffff; background-color: red; font: bold 10px;") # white red bold
self.label_00.setText("Error Position_1 or Bad selection")
# FreeCAD.Console.PrintError("Error Position_0" + "\n" + "or Bad selection" + "\n")
self.DS_Value_Angle_Dimension.setValue(0.0)
# print("on_CB_Position")
def on_CB_Point(self):
global ui
global myObject
global selM
global myObjectName
global positionMouse
if hasattr(selM, "Shape"):
sel = selM.Shape
elif hasattr(selM, "Mesh"): # upgrade with wmayer thanks #http://forum.freecadweb.org/viewtopic.php?f=13&t=22331
sel = selM.Mesh
elif hasattr(selM, "Points"):
sel = selM.Points
myObject = sel
if self.RB_Bond_Box_Center.isChecked(): # axis
point = Draft.makePoint(myObject.BoundBox.Center.x, myObject.BoundBox.Center.y, myObject.BoundBox.Center.z)
point.ViewObject.PointColor = (1.0,0.0,0.0)
point.Label = "Point_BoundBox_Center"
self.RB_Center_Mass.setStyleSheet("Base")
elif self.RB_Center_Mass.isChecked():
try:
point = Draft.makePoint(myObject.CenterOfMass.x, myObject.CenterOfMass.y, myObject.CenterOfMass.z)
point.ViewObject.PointColor = (0.0,1.0,0.0)
point.Label = "Point_CenterOfMass"
except Exception: # case Mesh.MeshObject
self.RB_Bond_Box_Center.setChecked(True)
self.RB_Center_Mass.setStyleSheet("background-color: rgb(250, 88, 88)")
elif self.RB_Point_Clicked.isChecked():
point = Draft.makePoint(positionMouse[0], positionMouse[1], positionMouse[2])
point.ViewObject.PointColor = (0.0,0.0,1.0)
point.Label = "Point_positionMouse"
Gui.Selection.addSelection(App.ActiveDocument.getObject(myObjectName))
FreeCAD.ActiveDocument.recompute()
# ui.on_RB_CenterRot()
# print("on_CB_Point")
def on_PB_Zero_clicked(self):
global myObject
global selM
# if (myObject != ""):
# try:
myObject = selM
pl = App.Placement(App.Vector(0.0,0.0,0.0), App.Rotation(0.0, 0.0, 0.0), App.Vector(0.0, 0.0, 0.0))
myObject.Placement = pl
if self.RB_Rotation_X.isChecked():
self.LE_Increment.setText(str(round(myObject.Placement.Rotation.toEuler()[0],4)))
elif self.RB_Rotation_Y.isChecked():
self.LE_Increment.setText(str(round(myObject.Placement.Rotation.toEuler()[1],4)))
elif self.RB_Rotation_Z.isChecked():
self.LE_Increment.setText(str(round(myObject.Placement.Rotation.toEuler()[2],4)))
elif self.RB_Direction_D.isChecked():
xD = str(round(myObject.Placement.Rotation.toEuler()[0],4))
yD = str(round(myObject.Placement.Rotation.toEuler()[1],4))
zD = str(round(myObject.Placement.Rotation.toEuler()[2],4))
self.LE_Increment.setText("(" + xD + ", " + yD + ", " + zD + ")")
self.label_00.setText("[Rot=(" +str(round(myObject.Placement.Rotation.toEuler()[0],2))+" , "+str(round(myObject.Placement.Rotation.toEuler()[1],2))+" , "+ str(round(myObject.Placement.Rotation.toEuler()[2],2))+")] "+
"[Axis=("+str(round(myObject.Placement.Base.x,2))+" , "+ str(round(myObject.Placement.Base.y,2))+" , "+ str(round(myObject.Placement.Base.z,2))+")]")
self.DS_Value_Angle_Dimension.setValue(0.0)
self.LE_Increment.setText(str(0.0))
#FreeCAD.ActiveDocument.recompute()
Gui.activeDocument().activeView().viewTop()
Gui.SendMsgToActiveView("ViewFit")
# except Exception:
# self.label_00.setStyleSheet("color : #ffffff; background-color: red; font: bold 10px;") # white red bold
# self.label_00.setText("Error Zero_0 or Bad selection")
## FreeCAD.Console.PrintError("Error Zero_0" + "\n" + "or Bad selection" + "\n")
# else:
# self.label_00.setStyleSheet("color : #ffffff; background-color: red; font: bold 10px;") # white red bold
# self.label_00.setText(" Select one Object or give one value Angle/Dimension")
## FreeCAD.Console.PrintError("Select one Object or give one value Angle/Dimension" + "\n")
## print("on_PB_Zero_clicked")
def on_PB_Original_clicked(self):
global ui
global myObject
global selM
global originalPlacement
global axisX, axisY, axisZ
global rotAngleX, rotAngleY, rotAngleZ
# if (myObject != ""):
# try:
rotAngleX = rotAngleY = rotAngleZ = 0.0
selM.Placement = originalPlacement
if hasattr(selM, "Shape"):
sel = selM.Shape
elif hasattr(selM, "Mesh"): # upgrade with wmayer thanks #http://forum.freecadweb.org/viewtopic.php?f=13&t=22331
sel = selM.Mesh
elif hasattr(selM, "Points"):
sel = selM.Points
myObject = sel
self.DS_Value_Angle_Dimension.setValue(0.0)
if self.RB_Rotation_X.isChecked():
self.LE_Increment.setText(str(round(myObject.Placement.Rotation.toEuler()[0],4))) # yaw Z
elif self.RB_Rotation_Y.isChecked():
self.LE_Increment.setText(str(round(myObject.Placement.Rotation.toEuler()[1],4))) # pitch Y
elif self.RB_Rotation_Z.isChecked():
self.LE_Increment.setText(str(round(myObject.Placement.Rotation.toEuler()[2],4))) # roll Z
elif self.RB_Direction_D.isChecked():
xD = str(round(myObject.Placement.Rotation.toEuler()[0],4))
yD = str(round(myObject.Placement.Rotation.toEuler()[1],4))
zD = str(round(myObject.Placement.Rotation.toEuler()[2],4))
self.LE_Increment.setText("(" + xD + ", " + yD + ", " + zD + ")")
ui.on_RB_CenterRot()
self.label_00.setText("[Rot=(" +str(round(myObject.Placement.Rotation.toEuler()[0],2))+" , "+str(round(myObject.Placement.Rotation.toEuler()[1],2))+" , "+ str(round(myObject.Placement.Rotation.toEuler()[2],2))+")] "+
"[Axis=("+str(round(axisX,2))+" , "+ str(round(axisY,2))+" , "+ str(round(axisZ,2))+")]")
#FreeCAD.ActiveDocument.recompute()
# except Exception:
# self.label_00.setStyleSheet("color : #ffffff; background-color: red; font: bold 10px;") # white red bold
# self.label_00.setText("Error Original_0 or Bad selection")
## FreeCAD.Console.PrintError("Error Original_0" + "\n" + "or Bad selection" + "\n")
# else:
# self.label_00.setStyleSheet("color : #ffffff; background-color: red; font: bold 10px;") # white red bold
# self.label_00.setText(" Select one Object or give one value Angle/Dimension")
## FreeCAD.Console.PrintError("Select one Object or give one value Angle/Dimension" + "\n")
## print("on_PB_Original_clicked")
def on_PB_Reset_clicked(self):
global ui
global originalObject
global myObject
global myObjectName
global duplicate_Memory
global duplicate_View
global valeur
global posX, posY, posZ
global rotAngleX, rotAngleY, rotAngleZ
global axisX, axisY, axisZ
global countMemory
try:
for obj in FreeCAD.ActiveDocument.Objects: # deslectionne
FreeCADGui.Selection.removeSelection(obj)
except Exception:
None
if countMemory == 0:
ui.on_PB_ClearMemo
originalObject = myObject = myObjectName = ""
posX = posY = posZ = rotAngleX = rotAngleY = rotAngleZ = 0.0
axisX = axisY = axisZ = 0.0
valeur = 0.0
self.DS_Value_Angle_Dimension.setStyleSheet("Base")
self.DS_Value_Angle_Dimension.setValue(valeur)
self.DS_Value_Angle_Dimension.setSuffix(" Degrees")
self.LE_Increment.setText(str(0.0))
self.groupBox_Axis.setTitle("Axis Rotation")
self.RB_Rotation_Z.setText("Rotation(X) Roll")
self.RB_Rotation_Y.setText("Rotation(Y) Pitch")
self.RB_Rotation_X.setText("Rotation(Z) Yaw")
self.RB_Direction_D.setText("Rotation(D) Direction")
self.groupBox_Rotation.setEnabled(False)
self.groupBox_Axis.setEnabled(False)
self.groupBox_Pos_Mouse.setEnabled(False)
self.groupBox_Work.setEnabled(False)
self.groupBox_Data.setEnabled(False)
self.DS_Pos_Mouse_X.setValue(0.0)
self.DS_Pos_Mouse_Y.setValue(0.0)
self.DS_Pos_Mouse_Z.setValue(0.0)
# duplicate_View = []
# self.CBox_View.blockSignals(True)
# self.CBox_View.clear()
#
# duplicate_Memory = []
# self.CBox_Memory.blockSignals(True)
# self.CBox_Memory.clear()
# self.CB_Position.setEnabled(False)
# self.CB_Position.setChecked(False)
self.CB_Position.setText(u"Translation")
self.CB_Position.setToolTip(u"Move the object to axis choice X, Y or Z")
#self.PB_Point.setEnabled(False)
self.PB_PointCenter.setStyleSheet("Base")
# self.CB_Free.setEnabled(False)
# self.CB_Free.setChecked(False)
self.PB_Memorize.setStyleSheet("Base")
self.label_00.setStyleSheet("color : #ffffff; background-color: red; font: bold 10px;") # white red bold
self.label_00.setText(" Select one Object or give one value Angle/Dimension")
# FreeCAD.Console.PrintError("Select one Object or give one value Angle/Dimension" + "\n")
# FreeCAD.Console.PrintMessage("Reset" + "\n")
# print("on_PB_Reset_clicked")
def on_PB_Quit_clicked(self):
global s
global switchZoomOnCilck
FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macros/FCMmacros/" + __title__).SetBool("switchZoomOnCilck", switchZoomOnCilck)
try:
self.vueActive.removeEventCallback("SoMouseButtonEvent",self.click) # desinstalle la fonction souris
except Exception:
None
try:
FreeCADGui.Selection.removeObserver(s) # Uninstalls resident function (desactivated for read after LeftDock RightDock)
self.window.setAttribute(QtCore.Qt.WA_DeleteOnClose, True) # destroy
self.window.deleteLater() # destroy
self.window.destroy() # destroy
except Exception:
self.window.hide() # hide the window and close the macro
FreeCAD.Console.PrintMessage("Quit Rotate_To_Point" + "\n")
###################################################################################################
class SelObserver:
def addSelection(self, document, object, element, position): # Selection
global ui
global sourisPass
global switchZoomOnCilck
global valeur
global positionMouse
global originalObject
global myObject
global myObjectName
global originalPlacement
global selM
global posX, posY, posZ
global rotAngleX, rotAngleY, rotAngleZ
global axisX, axisY, axisZ
if sourisPass == 0: # pour un seul passage
sourisPass == 1
selM = FreeCADGui.Selection.getSelection()[0] # select object with getSelection()
myObjectName = selM.Name
if hasattr(selM, "Shape"):
sel = selM.Shape
elif hasattr(selM, "Mesh"): # upgrade with wmayer thanks #http://forum.freecadweb.org/viewtopic.php?f=13&t=22331
sel = selM.Mesh
elif hasattr(selM, "Points"):
sel = selM.Points
if switchZoomOnCilck == 1:
ui.on_CBox_View(myObjectName) # return on zoom on click object selected
positionMouse = position
originalObject = myObject = sel
originalPlacement = sel.Placement
#longueur = (myObject.BoundBox.XLength * 0.5) # pour Axis
positionBase = originalObject.Placement.Base # Placement Vector XYZ
posX = positionBase.x
posY = positionBase.y
posZ = positionBase.z
Yaw = originalObject.Placement.Rotation.toEuler()[0] # decode angle Euler Yaw
Pitch = originalObject.Placement.Rotation.toEuler()[1] # decode angle Euler Pitch
Roll = originalObject.Placement.Rotation.toEuler()[2] # decode angle Euler Roll
rotAngleX = Yaw
rotAngleY = Pitch
rotAngleZ = Roll
axisX = axisY = axisZ = 0.0
valeur = 0.0
ui.DS_Value_Angle_Dimension.setValue(valeur)
ui.DS_Value_Angle_Dimension.setStyleSheet("background-color: rgb(250, 88, 88)")
ui.DS_Pos_Mouse_X.setValue(positionMouse[0])
ui.DS_Pos_Mouse_Y.setValue(positionMouse[1])
ui.DS_Pos_Mouse_Z.setValue(positionMouse[2])
ui.on_RB_CenterRot()
if ui.CB_Position.isChecked():
ui.groupBox_Rotation.setEnabled(False)
else:
ui.groupBox_Rotation.setEnabled(True)
ui.groupBox_Axis.setEnabled(True)
ui.groupBox_Work.setEnabled(True)
ui.groupBox_Data.setEnabled(True)
ui.PB_Memorize.setIcon(QtGui.QIcon(QtGui.QPixmap(memo_Allume_Icon))) # icone dans une variable
#ui.groupBox_Pos_Mouse.setEnabled(True)
ui.label_00.setStyleSheet("Base") # origin system
ui.label_00.setText("[Rot =(" + str(round(rotAngleX,2))+ " , " + str(round(rotAngleY,2)) + " , " + str(round(rotAngleZ,2)) + ")] " +
"[Axis=("+ str(round(axisX,2)) + " , " + str(round(axisY,2)) + " , " + str(round(axisZ,2)) + ")]")
ui.PB_Memorize.setStyleSheet("Base")
ui.PB_PointCenter.setStyleSheet("Base")
def clearSelection(self,doc): # Si clic sur l'ecran, effacer la selection
global ui
ui.on_PB_Reset_clicked()
###################################################################################################
doc = FreeCAD.ActiveDocument
if doc == None:
doc = FreeCAD.newDocument()
try:
for obj in FreeCAD.ActiveDocument.Objects: # deselectionne
FreeCADGui.Selection.removeSelection(obj)
except Exception:
None
s=SelObserver()
FreeCADGui.Selection.addObserver(s) # installe la fonction en mode resident
if __name__ == "__main__":
MainWindow = QtWidgets.QMainWindow()
MainWindow.setObjectName("__title__") # macro internal Name
ui = Ui_MainWindow()
ui.setupUi(MainWindow)
MainWindow.show()
Exemple
Liens
The forum feature req: placement - rotate part around its midpoint Mes macro sur Gist mario52a
Version
2021/03/08 version 00.010 : ajout du zoom sur l'objet cliqué, valeur mémoire, valeurs imposées
2021/02/25 Version=00.09 : correction de la macro créée : cause multi objets possible
App.ActiveDocument.getObject(p[0]).Placement
instead
myObject.Placement
2021/02/22 Version=00.08c : correct le center facePoint (19h26 Paris)
2021/02/22 Version=00.08b : correct le center facePoint (17h23 Paris)
2021/02/22 Version=00.08 : ajout sauvegarde du fichier macro avec un ou plusieurs objets déplacés
2021/01/24 Version=00.07 : ajout de l'option R: reverse
2021/01/12 ver 00.06 : ajout de la section Data et d'autres options
2020/03/07 ver 00.05.2 : correction du bug translation effacée "direction = myObject.Placement.Rotation.multVec(direction)"
2020/03/01 ver 00.05.1 : correction de la position du test "FreeCAD version"
2020/02/29 ver 00.05 : conversion pour Hdpi (Layout) et ajout fonction Direction
06/04/2019 ver 00.04 : Python 3
29/03/2018 ver 00.03 : commenter les lignes "FreeCAD.ActiveDocument.recompute()" le changement de valeur est trop lente dans FreeCAD 0.17.... voir FC0.17 recompute strange behaviour (regression)
27/03/2017 ver 00.02 : modification du spinbox "Pos" maintenant accepte les valeurs négatives
05/03/2017 ver 00.01 : ajout de 3 boîtes de dialogue pour afficher les coordonnées X Y Z au clic de souris
04/03/2017 ver 00.00