Macro Rectellipse
|
|
| Beschreibung |
|---|
| Erzeugt eine parametrische Rectellipse Versionsmakro : 1.0 Datum der letzten Änderung : 2013-12-24 FreeCAD version : All Herunterladen : ToolBar Icon Autor: fcaponi78 |
| Autor |
| fcaponi78 |
| Herunterladen |
| ToolBar Icon |
| Links |
| Makros Rezepte Wie installiere ich Makros So passen Sie Symbolleisten an |
| Macro-Version |
| 1.0 |
| Datum der letzten Änderung |
| 2013-12-24 |
| FreeCAD-Version(s) |
| All |
| Standardverknüpfung |
| None |
| Siehe auch |
| None |
Beschreibung
Erzeugt eine parametrische Rectellipse
Skript
ToolBar Icon 
Macro_Rectellipse.FCMacro
from __future__ import division # allows floating point division from integers
import FreeCAD, Part, math
from FreeCAD import Base
class RectEllipseShape:
def __init__(self, obj):
''' Add the properties: Radius, Eccentricity, Height, Segments (see Property View) '''
obj.addProperty("App::PropertyLength","a","Rectellipse","A - horizontal radius").a = 16.0
obj.addProperty("App::PropertyLength","b","Rectellipse","B - vertical radius").b = 9.0
obj.addProperty("App::PropertyFloat","n","Rectellipse","N ").n=0.2
obj.addProperty("App::PropertyBool","createFace","Rectellipse","Wheter to create a face or not").createFace=True
obj.Proxy = self
def onChanged(self, fp, prop):
if prop == "a" or prop == "b" or prop == "n" or prop == "segments" or prop == "height" or prop == "createFace":
#if one of these is changed
self.execute(fp)
def execute(self, fp):
r1=fp.a
r2=fp.b
s=fp.n
z=0.0
p=1.0
####w=2**0.5/2.0 #Ellipse
w=2**0.5/2.0/(1-s**p)
curve=Part.BSplineCurve()
curve.setPeriodic()
curve.increaseDegree(2) #quadratic
curve.insertKnots([i*1.0/(4) for i in (1,2,3)],[2]*(3)) #5Knots 8 Poles
curve.setPole(1,FreeCAD.Vector(0,-r2,z),1)
curve.setPole(2,FreeCAD.Vector(-r1,-r2,z),w)
curve.setPole(3,FreeCAD.Vector(-r1,0,z),1)
curve.setPole(4,FreeCAD.Vector(-r1,r2,z),w)
curve.setPole(5,FreeCAD.Vector(0,r2,z),1)
curve.setPole(6,FreeCAD.Vector(r1,r2,z),w)
curve.setPole(7,FreeCAD.Vector(r1,0,z),1)
curve.setPole(8,FreeCAD.Vector(r1,-r2,z),w)
if fp.createFace == True:
fp.Shape = Part.Face(Part.Wire(curve.toShape()))
else:
fp.Shape = curve.toShape()
def makeRectellipseBlock():
doc = FreeCAD.activeDocument()
if doc == None:
doc = FreeCAD.newDocument()
obj=doc.addObject("Part::FeaturePython","RectEllipseShape") #add object to document
obj.Label = "RectEllipsse"
RectEllipseShape(obj)
obj.ViewObject.Proxy=0
viewObject = Gui.ActiveDocument.getObject(obj.Name)
viewObject.ShapeColor = (0.00,0.33,1.00)
viewObject.DisplayMode = "Flat Lines"
obj.Shape.check()
if __name__ == "__main__":
#feature will be generated after macro execution
makeRectellipseBlock()