Macro FCInfo ToolBar: Difference between revisions

Revision as of 17:36, 29 March 2022

Other languages:

Description
Macro FCCInfo ToolBar
Gives information about the selected shape and can display a conversion of radius, diameter, length, area, volume ... in different units (metric and imperial) in a toolBar. The information to be displayed in real time is parametrizable in the Parameter of FreeCAD. Macro version: 00.03 Last modified: 2022/03/29 FreeCAD version: 0.18 and more Download: The toolBar icon Author: Mario52
Author
Mario52
Download
The toolBar icon
Links
Macros recipes How to install macros How to customize toolbars
Macro Version
00.03
Date last modified
2022/03/29
FreeCAD Version(s)
0.18 and more
Default shortcut
None
See also
Arch Survey Macro FCInfo Macro FCInfoGlass

Description

Gives information about the selected shape and can display a conversion of radius, diameter, length, area, volume ... in different units (metric and imperial) in a toolBar. The information to be displayed is parametrizable in the Parameter of FreeCAD.

Temporary code for external macro link. Do not use this code. This code is used exclusively by Addon Manager. Link for optional manual installation: Macro


# This code is copied instead of the original macro code
# to guide the user to the online download page.
# Use it if the code of the macro is larger than 64 KB and cannot be included in the wiki
# or if the RAW code URL is somewhere else in the wiki.

from PySide import QtGui, QtCore

diag = QtGui.QMessageBox(QtGui.QMessageBox.Information,
    "Information",
    "This macro must be downloaded from this link\n"
    "\n"
    "https://gist.githubusercontent.com/mario52a/e382adbe41747788ad15a18eb206a872/raw/45da6835214d570588244705d2c0f37f97320874/FCInfo_ToolBar.FCMacro" + "\n"
    "\n"
    "Quit this window to access the download page")

diag.setWindowFlags(QtCore.Qt.WindowStaysOnTopHint)
diag.setWindowModality(QtCore.Qt.ApplicationModal)
diag.exec_()

import webbrowser 
webbrowser.open("https://gist.githubusercontent.com/mario52a/e382adbe41747788ad15a18eb206a872/raw/45da6835214d570588244705d2c0f37f97320874/FCInfo_ToolBar.FCMacro")

FCInfo_ToolBar

Usage

After run the macro, go to Menu → Tools → Edit parameters ... :BaseApp/Preferences/Macros/FCMmacros/FCInfo_ToolBar

and check the info to display.

The complete info hare displayed in the ToolTip window, the checked option is visible if the "*" is displayed.

Use the button reset after change one option in the parameter window.

The Unit size can be selected : km, hm, dam, m, dm, cm, mm, µm, nm, pm, fm, inch, link, foot, yard, perch, chain, furlong, mile, league, nautique.

FCInfo_ToolBar the info toolTip

Options

The options hare located in the Parameter of FreeCAD

Menu → Tools → Edit parameters ... :BaseApp/Preferences/Macros/FCMmacros/FCInfo_ToolBar

switch_User_ToolbarIconSize
- if = false: the icon toolBar respect the FreeCAD value for the icon size
- if = true: the icon take the values of the variable seT_User_sizeIconX and seT_User_sizeIconY

seT_User_sizeIconX
- set the value X of the Icon

seT_User_sizeIconY
- set the value Y of the Icon

seT_User_setFixed_Tool_Bar_Width
- set the Width of the ToolBar

seT_User_setFixed_Tool_Bar_Height
- set the Height of the ToolBar

switch_User_Work_With_Preselection
- Work With the Preselectiond, update the data in real time

seT_User_StyleSheetColorToolBar
- set the color of the toolBar in HTML format example : #F8E6E0
- if the value is 0 the toolBar take the system color

seT_User_DecimalValue
- give the number of decimal of the number (Default 2)

seT_User_TextHeigthValue
- give the text height of the toolBar

switch_User_Display_objectName
- display the object Name ()

switch_User_Display_SubElementName
- display the SubElementName ()

switch_User_Display_ShapeType
- display the Shape type (TyS:)

switch_User_Display_TypeId
- display the TypeId (TyI:)

switch_User_Display_RadiusObject
- display the radius and the diameter (r:) [D:]

switch_User_Display_LengthObject
- display the Length of the edge selected or the Perimeter of the face selected
  - (L:) display the Length of the wire, edge, line selected
  - (P:) display the Perimeter if the face is selected

switch_User_Display_SommeAllEdgesObject
- display the somme of the all edge of the object selected (Se:)

switch_User_Display_NumberFacesMesh
- display the number of Faces of the Mesh object (Nf:)

switch_User_Display_NumberPointsMeshPoints
- display the number of points of the Mesh object (Np:)

switch_User_Display_NumberEdgesMesh
- display the number of edges of the Mesh object (Ne:)

switch_User_Display_AreaObject
- display the area of the object (A:)

switch_User_Display_AreaSubObject
- display the area of the face selected (Af:)

switch_User_Display_VolumeObject
- display the volume of the object (V:)

switch_User_Display_BsplineObject
- display the number of node of the Bspline selected
  - (BSpline) display the number of node of the BSpline
  - (BSrA) BSPline radius approximative first radius of the BSpline
  - (BSS) BSPline Points Shape number points of the Bspline (case Shape)
  - (BSc) BSPline Points Sub Object number points of sub object selected (case Edge)

switch_User_Display_CentreObject
- display the center of the circle (if one circle is detected) or of the object selected
  - (Ce:) display the center of circle (if detected), face, edge ... BBoxCenter of face, edge ... Sub selection" + "\n\n")

switch_User_Display_CentreBoundBoxObject
- display the boundingBox center of the object (BBCe:)

switch_User_Display_Position
- display the coordinates point mouse pointed (Pos:)

switch_User_NotInfoOnBeginning
- if it is false the info (this information) is displayed
- if it is true the info is not displayed

seT_User_UnitSymbolSquare
- give the symbol square (Default 2)

seT_User_UnitSymbolCube
- give the symbol cube (Default 3)

seT_User_UnitSymbolMicro
- give the symbol micro (Default u)

For automatic Run

in command line

In your shortcut verify your right path

"Complete_path_of_FreeCAD" "Complete_path_of_the_macro.FCMacro"

example:

"C:/FreeCAD_0.20.26858_Win-LPv12.5.4_vc17.x-x86-64/bin/FreeCAD.exe" "C:/Users/User/AppData/Roaming/FreeCAD/Macro/FCInfo_ToolBar.FCMacro"

in Mod directory

After install the macro with AddonManager
Create the FCInfo_ToolBar directory
Copy the macro FCInfo_ToolBar.FCMacro (copy not move) in the FCInfo_ToolBar directory and rename it in FCInfo_ToolBar.py
Create a file named InitGui.py
Paste the code in InitGui.py:

#### FC Version: 0.1 #16/02/2022
#### Mario52
#### FCInfo_ToolBar : mini FCInfo ####
#
import importlib
from importlib import reload
import FreeCAD, FreeCADGui
App = FreeCAD
Gui = FreeCADGui

switch_User_NotRunAuto = FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macros/FCMmacros/FCInfo_ToolBar").GetBool("switch_User_NotRunAuto")
## switch_User_NotRunAuto 0 (False) = run the macro in begin
## switch_User_NotRunAuto 1 (True)  = not run automatic the macro

if switch_User_NotRunAuto == False:
    import FCInfo_ToolBar
    #reload(FCInfo_ToolBar)
    FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macros/FCMmacros/FCInfo_ToolBar").SetBool("switch_User_NotRunAuto", False)
    #FreeCAD.Console.PrintMessage("InitGui Ok FCInfo_ToolBar" + "\n")

save the file
run FreeCAD
if the macro not run (normal) execute the macro FCInfo_ToolBar.FCMacro as a normal macro
the next start of FreeCAD the macro must start automatically

enjoy

Link

The forum discussion Feature request: coordinates display

Version

version: (00.02 +) 00.03 2022/03/22 : add somme all edges

version: 00.02 2022/03/14 : add calcul in real time (with preselection), dimension of toolBar, add info mesh and points

version: 00.01 2022/02/16 :

@@ Line 122: / Line 122: @@
 ***(P:) display the Perimeter if the face is selected
+<!--T:59-->
 *'''''switch_User_Display_SommeAllEdgesObject'''''
 **display the somme of the all edge of the object selected (Se:)
@@ Line 255: / Line 256: @@
 ==Version== <!--T:49-->
+<!--T:60-->
 version: (00.02 +) 00.03 2022/03/22 : add somme all edges