Macro Testo Circolare

From FreeCAD Documentation
Revision as of 17:22, 17 January 2021 by FuzzyBot (talk | contribs) (Updating to match new version of source page)
Other languages:

Testo Circolare

Descrizione
La nuova GUI della versione modificata per l'HD dpi (QGridLayout) esegue solo la versione FC 0.18 e successive (PySide2 Qt5)

Per la versione precedente vedere FCCircularText and install it manually.

Questa macro crea un testo intorno ad un cilindro.
Ultima Versione=0.14 Date=2019/04/27
Download the toolBar icon


Versione macro: 0.16d
Ultima modifica: 2020/09/15
Versione FreeCAD: 0.18 è più
Download: ToolBar Icon
Autore: Mario52
Autore
Mario52
Download
ToolBar Icon
Link
Versione macro
0.16d
Data ultima modifica
2020/09/15
Versioni di FreeCAD
0.18 è più
Scorciatoia
Nessuna
Vedere anche
Nessuno

Descrizione

Questa macro usa Draft ShapeString è scrive un testo, in piedi o coricato, circonferenziale o elicoidale nel modo di Trajan Column e crea un orologio con numeri arabi 1 2 3 ... o Romani I II III ... (ispirata a Macro to Create Clock Face) FC community member, cblt2l.

Temporary code for external macro link. Do not use this code. This code is used exclusively by Addon Manager. Link for optional manual installation: Macro


# This code is copied instead of the original macro code
# to guide the user to the online download page.
# Use it if the code of the macro is larger than 64 KB and cannot be included in the wiki
# or if the RAW code URL is somewhere else in the wiki.

from PySide import QtGui, QtCore

diag = QtGui.QMessageBox(QtGui.QMessageBox.Information,
    "Information",
    "This macro must be downloaded from this link\n"
    "\n"
    "https://gist.githubusercontent.com/mario52a/a25e802498bae6959335/raw/626d0fb54429687c14e4c613cf837f8ca8ad304e/Macro_FCCircularText.FCMacro" + "\n"
    "\n"
    "Quit this window to access the download page")

diag.setWindowFlags(QtCore.Qt.WindowStaysOnTopHint)
diag.setWindowModality(QtCore.Qt.ApplicationModal)
diag.exec_()

import webbrowser 
webbrowser.open("https://gist.githubusercontent.com/mario52a/a25e802498bae6959335/raw/626d0fb54429687c14e4c613cf837f8ca8ad304e/Macro_FCCircularText.FCMacro")


texte 360 degrees

Esempio di macro che mostra il testo con un orientamento a 360 gradi

Utilizzo

Usare la macro FcString per creare dei caratteri e il file FcClock per creare degli orologi.

Tutti i caratteri sono e rimangono indipendenti. Quando si creano le estrusioni non viene eliminato nulla. Se viene creato un Compound (oggetto Composto) con Run Comp esso viene copiato in una nuova cartella.

Di default le opzioni sono disattivate e si attivano quando si seleziona una delle funzioni:

  • Extrude Char.
  • Placement.
  • SP. inclination.

Fatta eccezione per la casella Z di Placement per Clock che è attiva e che sposta il testo lungo l'asse Z per consentire posizionare il testo sulla superficie di appoggio.

Nota

Le opzioni che sono facoltative per la funzione selezionata sono inattive e quindi non utilizzabili.

L'interfaccia grafica di Circular Text

Panoramica

GUI

Prima sezione

  • La finestra di editazione del testo che consente di inserire il testo da visualizzare (cliccando su Reset, nella finestra del titolo si può vedere quanti caratteri contiene la stringa di input)
  • Il pulsante Reverse serve per invertire il testo
  • LineEdit : visualizza il percorso e il nome del font del file
  • Il Help visualizza la pagina wiki nel browser FreeCAD
  • ComboView per il font scelto
    • ARIAL.TTF è il font di default

Opzioni disponibili

Dopo il primo utilizzo, è possibile modificare i parametri vedere:

User parameter:BaseApp/Preferences/Macros/FCMmacros/FCCircularText

switchModeTextList

  • 0 = modalità testo normale (e nero) chiude switchFontComBox
  • 1 = consente switchFontComBox 1

switchFontComBox

  • 0 = (e switchModeTextList = 1) modalità testo (a colori) nell'elenco ComboBox, più veloce
  • 1 = (e switchModeTextList = 1) font ComboBoxst più lento ma più bello!

setSystemFonts

  • 0 = matplotlib.font_manager.findSystemFonts ("C:/", "ttf")
  • fare tutti i caratteri (in tutte le cartelle e sottocartelle del DD) tempo !!
  • 1 = fontman.findSystemFonts (self.pathFont)
  • esegue tutti i caratteri nella directory (e in tutte le sottocartelle)

seTtextAlignement

  • 0 = AlignLeft (default)
  • 1 = AlignCenter
  • 2 = AlignRight

setFontByDefault

  • Font impostazione predefinita (ultimo utilizzato)

switchResetFALSE

  • 0 = reset (predefinito)
  • 1 = nessun reset (sconsigliato) alcuni switch possono rimanere aperti o chiusi inaspettatamente!

Esempio

  1. switchModeTextList= false
  2. switchFontComBox = false
  3. setSystemFonts = false
  4. seTtextAlignement = 0

  1. switchModeTextList= true
  2. switchFontComBox = false
  3. setSystemFonts = false
  4. seTtextAlignement = 0

  1. switchModeTextList= true
  2. switchFontComBox = false
  3. setSystemFonts = false
  4. seTtextAlignement = 1 (0=Left, 1=Centered, 2=Right)

  1. switchModeTextList= true
  2. switchFontComBox = true
  3. setSystemFonts = false
  4. seTtextAlignement = 1

Seconda sezione

Configurare i caratteri in FCCircularText

Prima zona

Scegliere:

  • Mode Stand o Mode Flat : Il testo può essere messo in piedi o coricato e le opzioni Outdoor e Indoor indicano se è rivolto verso l'esterno o verso l'interno .

Seconda zona

Questa sezione permette di configurare il comportamento complessivo dei caratteri in tutte le scelte disponibili, ma con qualche variazione. I comandi non utilizzabili con l'opzione scelta sono visualizzati in grigio.

  • 10.0 mm Radius of circle : Raggio del cerchio. (Default 10)
  • 2.0 mm Size character  : Altezza del carattere. (Default 2)
  • 0 deg Begin angle  : Angolo a cui posizionare il primo carattere. (Default 0 °)
  • 360 deg End angle  : Angolo a cui posizionare l'ultimo carattere. (Default 360)
  • 10.0 deg Correction angle : Angolo di correzione per rendere il carattere tangente al cerchio. (Default 10 °)
  • 0.15 mm Correction radius: Corregge il raggio del cerchio dei caratteri (optional). (Default 0.15)
  • Extrude Char : Estrusione dei caratteri. (di default è disattivato)
  • Placement : Posizione del testo nella vista 3D. (di default è disattivato)
  • Sp. inclination : Inclinazione del testo rispetto agli assi X, Y e Z (ad esempio per scrivere su un cono). (di default è disattivato)
Outdoor

Modo di default. Il testo viene scritto all'esterno della circonferenza del cerchio.

Indoor

Il testo viene scritto all'interno della circonferenza del cerchio

Helix

Il testo viene inserito all'esterno di un'elica.

  • L'area dell'elica è nascosto e solo visibile se il Helix e verificato.
  • Tutte le opzioni di configurazione dei caratteri sono disponibili.
  • Step of helix passo dell'elica
  • Char. per turn numero di caratteri per ogni spira dell'elica.
  • Se Step of helix (passo dell'elica) è zero, i campi Base Helix e End Helix sono attivi.
  • Base Helix fornisce la base per iniziare l'elica (anche Placement Z). Se 'Placement Z' è diverso da zero, il punto di partenza viene aggiunto a Placement Z.
  • End Helix Fine di passo dell'elica che è calcolato rispetto all'altezza e al numero di caratteri per spira.


Orologio

Le figure sono parte di un cerchio con numeri arabi o romani.

  • Di default, è nascosto e solo visibile se il Clock e verificato.
  • Quando si seleziona l'orologio, diventano utilizzabili le seguenti funzioni:
    1. Angolo iniziale.
    2. Angolo finale.
    3. Angolo di correzione.
    4. Correzione del raggio.
    5. I pulsanti Mode Stand o Mode Flat.
  • L'area Clock è attiva.
  • Radius of support : Se viene dato un valore, viene creato un supporto (default 0).
  • Se Support number face è diverso da zero viene creato un supporto. Se Extrude support = zero viene creata una faccia.
    • 1 = Viene creato un cerchio. Appare un cerchio.
    • 2 = Viene creato un rettangolo. Lunghezza = (Radius of media * 1.5) width = Radius of support. Appare un rettangolo.
    • 3 = Viene creato un triangolo circoscritto. Appare un triangolo.
    • 4 = Viene creato un quadrato, raggio del supporto. Appare un quadrato.
    • 5 = Viene creato un poligono circoscritto con il numero di facce indicate. Appare un poligono.
  • Extrude support viene attivato e si può fornire una dimensione di estrusione.

  • Se Support number face è uguale a zero non c'è il supporto.
  • Mode Roman : La scrittura è in cifre romane I II III IIII V VI VII VIII IX X XI XII
  • Axial  : I dati sono scritti assialmente.

Path section

The title section change and display the length of the wire selected.

If you select one wire, arc, circle, line and edge the section Path is coloured in green and the unused command coloured in red

  1. Orthogonal the character is Orthogonal to the view
  2. Tangent the character is Tangent to point path on wire
  1. BB Base the point base of the character is to point path on the wire
  2. BB Center the bounBox center of the character is to point path on the wire
  3. BB Top the top boundBox of the character is to point path on the wire

the last Radio Button used is saved in the parameter of FreeCAD

Sezione comandi

  • Exit  : Esce dalla macro macro.
  • Reset  : Ripristina tutti i valori e visualizza il numero di caratteri visualizzati nella finestra.
  • Run Comp : Lancia la macro e crea un oggetto Composto da tutti i caratteri.
  • Run  : Lancia la macro

Parameters available

Certain parameter are available in the parameters of FreeCAD see: Menu → Tools → Edit parameters...

  • User parameter: BaseApp/Preferences/Macros/FCMmacros/FCCircularText
    • switchModeTextList :
      • false normal text mode (and black) turns off switchFontComBox
      • true allow switchFontComBox 1 (default)
    • switchFontComBox :
      • false (and switchModeTextList = 1) text mode (in color) in Faster ComboBox list (default)
      • true (and switchModeTextList = 1) font Family in ComboBox list slower but more beautiful!
    • setSystemFonts :
      • false matplotlib.font_manager.findSystemFonts ("C: /", "ttf") do all fonts (in all folders and subfolders of the HD) time !!
      • true fontman.findSystemFonts (self.pathFont)
        make all the fonts in the directory (and in all the subfolders) (default)
    • seTtextAlignement : 0 = AlignLeft (default) 1 = AlignCenter 2 = AlignRight
    • setFontByDefault : Font by Default (the last used)
    • switchResetFALSE : false reset (default), true no reset (not recommended) some switches can stay open or close unexpectedly!
    • setPathOrthogonal : true false
    • setPathTangent : true false
    • setPositionBase : true false
    • setPositionCenter : true false
    • setPositionTop : true false
    • switchVersionSearch : true false
    • Version : FCCircularText version

Usare la macro FcString per creare dei caratteri e il file FcClock per creare degli orologi.

Script

Scaricare lo script da:

L'icona per ill pulsante:

- in .PNG

- in .SVG

Per maggiori informazioni vedere Personalizzare la barra degli strumenti

Vedi il Codice

Macro_Circular_Text.FCMacro


# -*- coding: utf-8 -*-
from __future__ import unicode_literals
"""
***************************************************************************
*   Copyright (c) 2014 2015 2016 2017 2018 2019 2020 <mario52>            *
*                                                                         *
*   This file is a supplement to the FreeCAD CAx development system.      *
*                                                                         *
*   This program is free software; you can redistribute it and/or modify  *
*   it under the terms of the GNU Lesser General Public License (LGPL)    *
*   as published by the Free Software Foundation; either version 2 of     *
*   the License, or (at your option) any later version.                   *
*   for detail see the LICENCE text file.                                 *
**                                                                       **
*   Use at your own risk. The author assumes no liability for data loss.  *
*              It is advised to backup your data frequently.              *
*             If you do not trust the software do not use it.             *
**                                                                       **
*   This software is distributed in the hope that it will be useful,      *
*   but WITHOUT ANY WARRANTY; without even the implied warranty of        *
*   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
*   GNU Library General Public License for more details.                  *
*                                                                         *
*   You should have received a copy of the GNU Library General Public     *
*   License along with this macro; if not, write to the Free Software     *
*   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  *
*   USA                                                                   *
***************************************************************************
*   http://www.freecadweb.org/wiki/index.php?title=Macro_FCCircularText   *
*           WARNING! All changes in this file will be lost and            *  
*                  may cause malfunction of the program                   *
***************************************************************************
"""
# FCCircularText.FCMacro    # Icon fromTheme FreeCAD
# ver 0.14-2 #00.14-4 #00.15 (rmu)#00.16 #0.16b #0.16c #0.16d #0.17 2020/09/26 #0.17b 2020/09/28#
#
##################################################################################################
#OS: Windows 10 (10.0)
#Word size of OS: 64-bit
#Word size of FreeCAD: 64-bit
#Version: 0.19.22474 (Git)
#Build type: Release
#Branch: master
#Hash: a44f8ffd427fa9b23b1f00dbf62d66cd152cd774
#Python version: 3.6.8
#Qt version: 5.12.1
#Coin version: 4.0.0a
#OCC version: 7.3.0
#Locale: French/Mars (fr_MA)
##################################################################################################
#
__Title__    = "FCCircularText"
__Author__   = "Mario52"
__Version__  = "0.17b"
__Date__     = "2020/09/28" #YYYY/MMM/DD

__Comment__  = "This macro creates a text around a cylinder"
__Web__      = "https://forum.freecadweb.org/viewtopic.php?f=3&t=7384%22"
__Wiki__     = "https://wiki.freecadweb.org/Macro_FCCircularText"
__Icon__     = "/usr/lib/freecad/Mod/plugins/icons/FCCircularTextButtom.png"
__IconW__    = "C:/Users/YourUserName/AppData/Roaming/FreeCAD/Macro"
__Help__     = "start the macro and follow the instructions"
__Status__   = "stable"
__Requires__ = "freecad 0.19 and higher"
__Communication__ = "https://wiki.freecadweb.org/index.php?title=User:Mario52"
#

import PySide2
from PySide2 import (QtWidgets, QtCore, QtGui)
from PySide2.QtWidgets import (QWidget, QApplication, QSlider, QGraphicsView, QGraphicsScene, QVBoxLayout, QStyle)
from PySide2.QtGui import (QPainter, QColor, QIcon)
from PySide2.QtSvg import *

import Draft, Part, FreeCAD, math, PartGui, FreeCADGui
from math import sqrt, pi, sin, cos, asin, degrees, radians, tan
from FreeCAD import Base
import os, time, sys

App=FreeCAD
Gui=FreeCADGui
import WebGui

#### Detect version macro ########################################### #26/09/2020
def vesionSearch():
    try:
        import requests
        contentPage = requests.get("https://wiki.freecadweb.org/Macro_" + __Title__).text
        versionDetect = dateDetect = ""
        for i in contentPage.split("\n"):            # list page to line
            if "ctEven macro-version" in i:
                versionDetect = (i.split(">")[1])
            if "ctEven macro-date" in i:
                dateDetect = (i.split(">")[1])
            if (versionDetect != "") and (dateDetect != ""):
                break
        try:
            if (versionDetect == __Version__) and (dateDetect == __Date__):
                None
            else:
                msg = ("New version availlable : " + "\n" + 
                      str(versionDetect) + ":" + str(dateDetect) + "\n" + 
                      "You can install with AddonManager")
                FreeCAD.Console.PrintMessage("your actual version    : " + str(__Version__) + " : " + str(__Date__) + "\n")
                FreeCAD.Console.PrintMessage("new version availlable : " + str(versionDetect) + " : " + str(dateDetect) + "\n")
                diag = QtWidgets.QMessageBox(QtWidgets.QMessageBox.Information, 'New Version', msg)
                diag.setWindowModality(QtCore.Qt.ApplicationModal)
                diag.exec_()
        except Exception:
            None
        return versionDetect, dateDetect
    except Exception:
        FreeCAD.Console.PrintError("Not search version not connected for testing" + "\n")
##
##
global switchVersionSearch; switchVersionSearch = 0  # Search version switchable in 
                                                     # Tools/Edit parameter/BaseApp/Preferences/Macros/FCMmacros/FCCircularText
switchVersionSearch = FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macros/FCMmacros/" + __Title__).GetBool("switchVersionSearch")
if switchVersionSearch == 1:
    vesionSearch()
#### Detect version macro ###########################################

import sys,traceback
def sayexc(mess=''):
    exc_type, exc_value, exc_traceback = sys.exc_info()
    ttt=repr(traceback.format_exception(exc_type, exc_value,exc_traceback))
    lls=eval(ttt)
    l=len(lls)
    l2=lls[(l-3):]
    FreeCAD.Console.PrintError(mess + "\n" +"-->  ".join(l2))

import platform
global verPython ;  verPython = sys.version_info

class ConfigManager():

    def __init__(self,name):
        self.name="Plugins/"+name

    def get(self,param,default,defaultWindows=None,defaultMac=None):
            global verPython
            os=platform.system()
            #os='Linux'
            #os='Windows'
            #os='Darwin'
            v=False
            if not defaultWindows:
                defaultWindows=default
            if not defaultMac:
                defaultMac=default
            if os =='Windows' :
                default= defaultWindows
            if os =='Darwin' :
                default= defaultMac

            if verPython.major < 3:
                if default.__class__ == unicode:
                    default=str(default)
#                return unicode(encoder).encode('iso-8859-1')
            else:
#                encoder = str(encoder)
#                return encoder
                None

            if default.__class__ == int:
                v=FreeCAD.ParamGet('User parameter:'+self.name).GetInt(param)
                if not v:
                    FreeCAD.ParamGet('User parameter:'+self.name).SetInt(param,default)
            if default.__class__ == float:
                v=FreeCAD.ParamGet('User parameter:'+self.name).GetFloat(param)
                if not v:
                    FreeCAD.ParamGet('User parameter:'+self.name).SetFloat(param,default)
            if default.__class__ == str:
                v=FreeCAD.ParamGet('User parameter:'+self.name).GetString(param)
                if not v:
                    FreeCAD.ParamGet('User parameter:'+self.name).SetString(param,default)
            if default.__class__ == bool:
                v=FreeCAD.ParamGet('User parameter:'+self.name).GetBool(param)
                if not v:
                    FreeCAD.ParamGet('User parameter:'+self.name).SetBool(param,default)
            if not v:
                v=default
            return v

global ui               ;ui = ""
global s                ;s  = ""
global points           ;points   = 0.0
global coor_X           ;coor_X   = 0.0
global coor_Y           ;coor_Y   = 0.0
global coor_Z           ;coor_Z   = 0.0
global vec              ;vec      = 0

global PolicePath

cm=ConfigManager("circular text")
PolicePath=cm.get("PolicePath","/usr/share/fonts/","C:/Windows/Fonts/ARIAL.TTF","/Library/Fonts/Arial.ttf")

import FreeCADGui
Gui=FreeCADGui
global rayon            ;rayon           = 10.0               # radius
global texte            ;texte           = "FreeCAD the best" #FreeCad The Best your text
global debut            ;debut           = 0                  # begin text
global rotation         ;rotation        = 360                # must exceed the number of characters of text
global SizeCaractere    ;SizeCaractere   = 2.0                # size font

global precision        ;precision       = 0.0
global correctionAngle  ;correctionAngle = 10.0
global correctionRayon  ;correctionRayon = 0.15
global debout           ;debout          = 1                  # 1=stand   0=flat
global exterieur        ;exterieur       = 1                  # 1=exteral 0=internal
global baseHelix        ;baseHelix       = 0.0                # base of helix
global endHelix         ;endHelix        = 0.0                # end of helix (heigth)
global pasHelix         ;pasHelix        = 2.0                # Pas of helix
global nombreCarParTour ;nombreCarParTour= 10                 # number char by Pas
global PivotCharachter  ;PivotCharachter = 0.0                # pivot character sur lui meme

global PlacementX       ;PlacementX      = 0.0                # Placement character axis X
global PlacementY       ;PlacementY      = 0.0                # Placement characher axis Y
global PlacementZ       ;PlacementZ      = 0.0                # Placement characher axis Z

global inclinaisonX     ;inclinaisonX    = 0                  # inclination character axis X
global inclinaisonY     ;inclinaisonY    = 0                  # inclination character axis Y
global inclinaisonZ     ;inclinaisonZ    = 0                  # inclination character axis Z + correctionAngle

global cercleClock      ;cercleClock     = rayon              # diameter support clock
global nombreFaces      ;nombreFaces     = 0                  # number Faces of support 0=none 1=circle 2=rectangle 3=triangle 4,5 ... polygon
global romain           ;romain          = 0                  # number roman or arabic
global redressement     ;redressement    = 0                  # character V or circular

global comP             ;comP            = ""                 # contener 
global nameL            ;nameL           = ""                 # contener 
global epaisseur        ;epaisseur       = 0.0                # epaisseur extrusion character
global epaisSupp        ;epaisSupp       = 0.0                # epaisseur extrusion support

global compount1        ;compount1       = 0                  # cree un compose des caracteres

# pointColor
global red              ;red   = 1.0  # 1 = 255 [ color num x = (1/255)*x ]
global green            ;green = 0.0  #
global blue             ;blue  = 0.0  #

#path#################################################################
global path                                                          #
#path  = FreeCAD.ConfigGet("AppHomePath")                             # path FreeCAD installation
#path  = FreeCAD.ConfigGet("UserAppData")                             # path FreeCAD User data
#path  = "your path"                                                  # your directory path
param = FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macro") # macro path
path  = param.GetString("MacroPath","") + "/"                        # macro path
path  = path.replace("\\","/")                                       # convert the "\" to "/"
#FreeCAD.Console.PrintMessage( "Path for the icons : " + path  + "\n")# 
######################################################################

indoorIcon = [
"60 46 9 1",
" 	c None",
".	c #6F2322",
"+	c #343433",
"@	c #CE1416",
"#	c #3E3E6E",
"$	c #5C5A58",
"%	c #5D5C85",
"&	c #7A7B99",
"*	c #8E8DA5",
"************************************************************",
"************************************************************",
"************************************************************",
"************************************************************",
"************************************************************",
"********************************++++++++++++****************",
"***************************+++++$$$$$$$$$$$$++**************",
"************************+++$$$$$$$$$$$$$$$$$$$++************",
"**********************++$$$$$$$$$$$$$$$$$$$$$$$$++**********",
"*******************+++$$$$$$$$$$$$$$$$$$$$$$$$$$$$+*********",
"******************++$$$$$$$$$$$$$++++$$$$$$$$$$$$$$+********",
"****************++$$$$$$$$$$+++++$$$$+++++$$$$$$$$$+********",
"***************+$$$$$$$$++++$$$$$$$@@@$$$$++$$$$$+++********",
"*************++$$$$$$$$+$$$$$@@@$$$@$$$$$$$$+$$$+$$+********",
"************+$$$$$$$$++$$$$$$@$$$$$@$$$$$$@@$+++$$$$+*******",
"***********+$$$$$$$$+$$@@@$$$@@@$$$@$$$$$@@@$+$$$$$$+*******",
"**********+$$$$$$$$+$$$@$$$$$@$$$$$@@@$$$@$@$+$$$$$$+*******",
"*********+$$$$$$$$+$$$$@@@$$$@@@$$$$+++++@@@$++$$$$$+*******",
"********+$$$$$$$$+$$$$$@$$$$$$$$$+++****@@*@+@@@$$$+********",
"*******+$$$$$$$$+$@@@$$@@@$$$++++************@*@@++*********",
"******+$$$$$$$$+$$@$@.$$$$$++****************@**@***********",
"******+$$$$$$$$+$$@@@$$$$++******************@@*@***********",
"*****+$$$$$$$$++$$@$@.$++********************@@@@***********",
"*****+$$$$$$$$++$$@$$@+*************************************",
"*****+$$$$$$++$$$$$$+***************************************",
"****+$$$$$$$+$$$$$++****************************************",
"****+$$$$$$$+$@@@.+*****************************************",
"****+$$$$$$$+$@$$+******************************************",
"****+$$$$$$$+$@@@+******************************************",
"****+$$$$$$$$.@$+*******************************************",
"****+$$$$$$$$.@$+*******************************************",
"****+$$$$$$$++$$+*******************************************",
"****+$$$$$$+++$$+*******************************************",
"*****+$$$++$$$+$+*******************************************",
"*****+$++$$$$$+$+*******************************************",
"******+$$$$$$$+++*******************************************",
"*******+$$$$$$$++*******************************************",
"*******+$$$$$$$+********************************************",
"********+$$$$$$+********************************************",
"********+$$$$++*********************************************",
"********++$++***********************************************",
"*********++*************************************************",
"************************************************************",
"************************************************************",
"************************************************************",
"************************************************************"]

helpIcon = [
"24 24 4 1",
" 	c None",
".	c #016AC5",
"+	c #F8F8FF",
"@	c #FFFFFF",
"........................",
".++++++++++++++++++++++.",
".++++++++++++++++++++++.",
".++..................++.",
".++..................++.",
".++......@@@@@@......++.",
".++.....@@@@@@@@.....++.",
".++.....@@@..@@@.....++.",
".++.....@@....@@.....++.",
".++.....@@....@@.....++.",
".++...........@@.....++.",
".++..........@@@.....++.",
".++.........@@@......++.",
".++........@@@.......++.",
".++........@@........++.",
".++........@@........++.",
".++..................++.",
".++........@@........++.",
".++........@@........++.",
".++..................++.",
".++..................++.",
".++++++++++++++++++++++.",
".++++++++++++++++++++++.",
"........................"]

executeIcon = [
"24 24 3 1",
" 	c None",
".	c #4E9A06",
"+	c #FFFFFF",
"                        ",
"                        ",
"                        ",
"                  .     ",
"                 .+.    ",
"                .+.+.   ",
"               .+...+.  ",
"              .+.....+. ",
"     .       .+.......+.",
"    .+.     .+.......+. ",
"   .+.+.   .+.......+.  ",
"  .+...+. .+.......+.   ",
" .+.....+.+.......+.    ",
".+.......+.......+.     ",
" .+.............+.      ",
"  .+...........+.       ",
"   .+.........+.        ",
"    .+.......+.         ",
"     .+.....+.          ",
"      .+...+.           ",
"       .+.+.            ",
"        .+.             ",
"         .              ",
"                        "]

quitIcon = [
"24 24 3 1",
" 	c None",
".	c #FFFFFF",
"+	c #CC0000",
"          ....          ",
"++++++++++....++++++++++",
"+.......++....++.......+",
"+.......++....++.......+",
"+.......++....++.......+",
"+...++++++....++++++...+",
"+...++++++....++++++...+",
"+...+++++......+++++...+",
"+...+++++......+++++...+",
"+...+++++......+++++...+",
"+...+++++......+++++...+",
"+...+++++......+++++...+",
"+...+++++......+++++...+",
"+...++++++++++++++++...+",
"+...++++++++++++++++...+",
"+...++++++++++++++++...+",
"+...++++++++++++++++...+",
"+...++++++++++++++++...+",
"+...++++++++++++++++...+",
"+...++++++++++++++++...+",
"+......................+",
"+......................+",
"+......................+",
"++++++++++++++++++++++++"]

resetIcon = [
"24 24 3 1",
" 	c None",
".	c #3465A4",
"+	c #888A85",
"                        ",
"      ........          ",
"     .++++++++.         ",
"    .++..+....+.  ..... ",
"    .+.. .+....+. .+++. ",
"    .+.   .+....+..+.+. ",
"    ...    .+....+.+.+. ",
"            .+....+..+. ",
"             .+......+. ",
"              .+.....+. ",
"               .+....+. ",
"  ......        .+...+. ",
"  .++++.         .++++. ",
"  .+...+.        ...... ",
"  .+....+.              ",
"  .+.....+.             ",
"  .+......+.            ",
"  .+..+....+.           ",
"  .+.+.+....+.    ...   ",
"  .+.+..+....+.   .+.   ",
"  .+++. .+....+. ..+.   ",
"  .....  .+....+..++.   ",
"          .++++++++.    ",
"           ........     "]

standIcon = [
"16 16 9 1",
" 	c None",
".	c #010400",
"+	c #28090D",
"@	c #4C0000",
"#	c #770000",
"$	c #AE0000",
"%	c #262826",
"&	c #CB0000",
"*	c #FD0705",
"***********     ",
"***********     ",
"**  ***  **     ",
"**  *...........",
"    *...........",
"    *..  ...  ..",
"    ***  ...    ",
"    ***  ...    ",
"    ***  ...    ",
"    ***  ...    ",
"    ***  ...    ",
"   ***** ...    ",
"         ...    ",
"         ...    ",
"        .....   ",
"                "]

flatIcon = [
"16 16 9 1",
" 	c None",
".	c #020400",
"+	c #2B0500",
"@	c #620502",
"#	c #770301",
"$	c #970300",
"%	c #B40100",
"&	c #E60002",
"*	c #FE0004",
"                ",
"                ",
"                ",
"                ",
"    **    .     ",
"   ***   ...    ",
"   **    ...    ",
"  ***   ..      ",
"  ***   ..      ",
"  ****&#...     ",
" *****$+.....%  ",
" **  &.+%@...@. ",
" **  ..#*&%@....",
"**** ...  *&$...",
" ***  ..   ** ..",
"               ."]

romanIcon = [
"16 16 5 1",
" 	c None",
".	c #FD9806",
"+	c #FD9904",
"@	c #FD9905",
"#	c #FD9906",
"                ",
"                ",
"             @@ ",
"         @@@@@  ",
"     @@@@@  @@  ",
"  @@@@  @@  @@  ",
"@@  @@  @@   @@ ",
"@@@ @@   @@  @@ ",
" @@@@    @@  @@ ",
"  +@@    @@  @@ ",
"   #@@@   @  @@@",
"  @@ .@@  @@@@  ",
"  @#  @@@@@     ",
" +@@@@@         ",
" @@             ",
"                "]

arabicIcon = [
"16 16 5 1",
" 	c None",
".	c #F6972B",
"+	c #F6982B",
"@	c #F5972B",
"#	c #F7982B",
"                ",
"                ",
"                ",
"          ..    ",
"   ..   .....   ",
"  ...       ..  ",
"    .      ..   ",
"    .+     ..   ",
"    .+    @.    ",
"    .+   #....  ",
"    ...  ...    ",
"  ....          ",
"            ... ",
"     .......    ",
"   ...          ",
"                "]

redressIcon = [
"16 16 4 1",
" 	c None",
".	c #010400",
"+	c #000000",
"@	c #FD9905",
"                ",
"                ",
"..   ..+        ",
" .     .        ",
" .    ++  ..    ",
" .   +     .    ",
"...  ...   .    ",
"           .    ",
"   @      ...   ",
"   @            ",
"   @   @    ..+ ",
"   @  @       . ",
"   @@@       .+ ",
"   @@         . ",
"            ..+ ",
"                "]

axialIcon = [
"16 16 4 1",
" 	c None",
".	c #000000",
"+	c #010400",
"@	c #FD9905",
"                ",
"                ",
"++   ++.        ",
" +     +        ",
" +    ..     +. ",
" +   .       +. ",
"+++  +++    +   ",
"          ++    ",
"   @       +    ",
"   @            ",
"   @   @        ",
"   @  @    +   +",
"   @@@     + + +",
"   @@      .+.+.",
"                ",
"                "]

#### matplotlib debut 1/5 #################################################################
#import PySide2
#from PySide2 import (QtWidgets, QtCore, QtGui)
#from PySide2.QtWidgets import (QWidget, QApplication, QSlider, QGraphicsView, QGraphicsScene, QVBoxLayout, QStyle)

import re
import operator
from operator import itemgetter #, attrgetter, methodcaller    # pour sort 

setIconTTF = [
"16 16 6 1",
" 	c None",
".	c #204A87",
"+	c None",
"@	c #729FCF",
"#	c #CC0000",
"$	c #EDD400",
".+++++++++++@@@@",
".++++++++@+@++@@",
".++#####++++@@+@",
".+++$#$$$++@+@+@",
".++++#$+++++++@+",
".++++#$#####++++",
".++++#$+$#$$$+++",
".++++#$++#$+++++",
".@++++$++#$+###+",
".@@++++++#$+#$$$",
"..@@+++++#$+#$++",
"...@@+++++$+###+",
"....@@++++++#$$$",
".....@@+++++#$++",
"......@@+++++$++",
"................"]

setIconFON = [
"16 16 6 1",
" 	c None",
".	c #204A87",
"+	c None",
"@	c #F57900",
"#	c #CC0000",
"$	c #EDD400",
".+++++++++++@@@@",
".++++++++@+@++@@",
".++###++++++@@+@",
".++#$$$++++@+@+@",
".++#$+++++++++@+",
".++###+###++++++",
".++#$$$#$#$+++++",
".++#$++#$#$+++++",
".@++$++#$#$##+#+",
".@@++++#$#$##$#$",
"..@@+++###$#$##$",
"...@@+++$$$#$##$",
"....@@+++++#$+#$",
".....@@++++#$+#$",
"......@@++++$++$",
"................"]

setIconOTF = [
"16 16 6 1",
" 	c None",
".	c #204A87",
"+	c None",
"@	c #4E9A06",
"#	c #CC0000",
"$	c #EDD400",
".+++++++++++@@@@",
".++++++++@+@++@@",
".++###++++++@@+@",
".++#$#$++++@+@+@",
".++#$#$+++++++@+",
".++#$#$###++++++",
".++#$#$+#$$+++++",
".++###$+#$++++++",
".@++$$$+#$+###++",
".@@+++++#$+#$$$+",
"..@@++++#$+#$+++",
"...@@++++$+###++",
"....@@+++++#$$$+",
".....@@++++#$+++",
"......@@++++$+++",
"................"]

setIconPOL = [
"16 16 12 1",
" 	c None",
".	c #204A87",
"+	c None",
"@	c #06989A",
"#	c #73D216",
"$	c #000000",
"%	c #75507B",
"&	c #729FCF",
"*	c #CC0000",
"=	c #F57900",
"-	c #EDD400",
";	c #4E9A06",
".+++++++++++@#$%",
".++++++++$+#++&$",
".++***++++++=@+%",
".++*-*-++++*+&+$",
".++*-*-+++++++*+",
".++***-***++++++",
".++*---*-*-+++++",
".++*-++*-*-+++++",
".$++-++*-*-*++++",
".*@++++*-*-*-+++",
"..#*+++***-*-+++",
"...;#+++---*-+++",
"....%=+++++*-+++",
".....;$++++****+",
"......@%++++----",
"................"]

#import glob
#files_TTF = glob.glob(self.pathFont + "/*.TTF") 
##################################
import matplotlib
import matplotlib.font_manager
import matplotlib.font_manager as fontman
import matplotlib.font_manager as fontconfig
from matplotlib.font_manager import FontProperties
#from matplotlib.ft2font import FT2Font
##################################

#### Config Begin matplotlib font #######################
                                                        # # https://en.wikipedia.org/wiki/Web_colors
global setColorTTF       ; setColorTTF       = "blue"   # .TTF   color by "extension name" or hexa "#0000FF" 
global setColorFON       ; setColorFON       = "orange" # .FON   color by "extension name" or hexa "#FFA500"
global setColorOTF       ; setColorOTF       = "green"  # .OTF   color by "extension name" or hexa "#008000"
global setColorPOL       ; setColorPOL       = "black"  # .OTHER color by "extension name" or hexa "#000000"
                                                      #####
global switchModeTextList; switchModeTextList= 1        # 0 = mode text normal (et noir) coupe le switchFontComBox
                                                        # 1 = permet le switchFontComBox 1 (default)
                                                      #####
global switchFontComBox  ; switchFontComBox  = 0        # 0 = (et switchModeTextList= 1) mode texte (en couleur) dans liste ComboBox plus rapide (default)
                                                        # 1 = (et switchModeTextList= 1) fontFamily dans liste ComboBox plus lent mais plus beau!
                                                      #####
global setSystemFonts    ; setSystemFonts    = 1        # 0 = matplotlib.font_manager.findSystemFonts("C:/", "ttf") 
                                                        #     fait toutes les fontes (dans tous les dossiers et sous dossiers du DD) time !!
                                                        # 1 = fontman.findSystemFonts(self.pathFont)
                                                        #     fait toutes les fontes du repertoire (et dans tous les sous dossiers) (default)
                                                      #####
global seTtextAlignement ; seTtextAlignement = 0        # 0 = AlignLeft (default)
                                                        # 1 = AlignCenter
                                                        # 2 = AlignRight
                                                      #####
global setFontByDefault  ; setFontByDefault  = "ARIAL"  # Font by Default
                                                      #####
global switchResetFALSE  ; switchResetFALSE  = 0        # 0 = reset (default)
                                                        # 1 = pas de reset (non conseille) certains switch peuvent rester ouvert ou fermer inopinement !
                                                      #####
#### Config End matplotlib font #########################
global setPathOrthogonal ; setPathOrthogonal = 0        # 
global setPathTangent    ; setPathTangent    = 1        # 
global setPositionBase   ; setPositionBase   = 1        # 
global setPositionCenter ; setPositionCenter = 0        # 
global setPositionTop    ; setPositionTop    = 0        # 
#### Config #############################################

def createSpace(texte):    # detecte majuscule et ajoute un espace devant la lettre
    # return createSpace(TexTe) = Tex Te , if createSpace(TEXTE) = TEXTE
    if texte.isupper():
        stringSpace = texte
    else:
        try:
            stringSpace = texte[0]
            for i in texte[1:]:
                if re.search(r"[A-Z]", i): i = " " +  i
                stringSpace += i
        except Exception:
            stringSpace = texte
    return stringSpace

def family(chaine):
    # return family(chaine)[1] = Family , family(chaine)[2] = typeCar (form [a, b, c ...]
    famille = typeCar = ""
    try:
        if chaine.find('-') != -1:
            famille = chaine[:chaine.find('-')]
            typeCar = chaine[chaine.find('-')+1:]
        else:
            famille = chaine
            typeCar = ""
    except Exception:
        famille = chaine
        typeCar = ""
    typeCar = str(createSpace(typeCar)).split()
    return [createSpace(famille), typeCar]

class MyLabelPatience():        # fenetre image d'attente de chargement
    global path
    label = QtWidgets.QLabel()
    label.setText("<img src=" + path + "FCCircularTextButtom.png><b><center>Wait please</center> \n\n<center>i search the fonts !\n\n</right></b>")
    ecran = FreeCADGui.getMainWindow().frameGeometry()
    xF = 250; yF = 250
    xW = (ecran.width()/2) - (xF/2)
    yW = (ecran.height()/2)- (yF/2)
    label.setGeometry(xW, yW, xF, yF)
    label.setStyleSheet("QLabel {background-color : #F0C300;font: 12pt; }");
    label.setWindowFlags(PySide2.QtCore.Qt.WindowFlags(PySide2.QtCore.Qt.FramelessWindowHint))        # pas de bords
    label.setWindowFlags(PySide2.QtCore.Qt.WindowStaysOnTopHint)         # PySide cette fonction met la fenetre en avant
#### matplotlib fin 1/5 #################################################################

try:
    _fromUtf8 = QtCore.QString.fromUtf8
except AttributeError:
    def _fromUtf8(s):
        return s

try:
    _encoding = QtGui.QApplication.UnicodeUTF8
    def _translate(context, text, disambig):
        return QtGui.QApplication.translate(context, text, disambig, _encoding)
except AttributeError:
    def _translate(context, text, disambig):
        return QtGui.QApplication.translate(context, text, disambig)

class Ui_MainWindow(object):

    def __init__(self):
        global path
        self.path          = path

    #### matplotlib debut 2/5 apres __init__ #################################################################
        #### matplotlib font textEdit
        self.FontTextSize  = 20
        self.fonteComp     = ""
        self.font          = QtGui.QFont()
        self.tableau       = [] #Index (), [chemin plus nom fichier (nomPathPolice), nom sans extension (nomSimple), nomSimpleExt (nomSimple + Ext)]
        self.index         = 0  #Index ()
        #### matplotlib font textEdit
    def searchFont(self,pathSearch):
        global PolicePath
        global setSystemFonts
        global seTtextAlignement
        global switchFontComBox
        global switchModeTextList
        global setFontByDefault

        MyLabelPatience.label.show()
        FreeCADGui.updateGui()                                 # rafraichi l'ecran

        files_All_Fonts = ""
        ##https://matplotlib.org/_modules/matplotlib/font_manager.html

        if setSystemFonts == 0:
            files_All_Fonts = matplotlib.font_manager.findSystemFonts(pathSearch, "ttf")  # fait toutes les fontes ? ()
        else:
            files_All_Fonts = fontman.findSystemFonts(pathSearch)                         # fait toutes les fontes (et dans tous les sous dossiers)

        if len(files_All_Fonts) > 0:           
            self.tableau = []
            self.index = 0

            for fonte in files_All_Fonts:
                ####
                nomPathPolice = nomFichier = nomSimpleExt = nomSimple = nomExtension = nameName = ""

                nomPathPolice = fonte.replace("\\","/")     # convert the "\" to "/"
                nomFichier    = nomPathPolice.split("/")    # complet split
                nomSimpleExt  = nomFichier[-1]              # nom avec extension
                nomSimple     = nomFichier[-1][:-4]         # nom sans extension
                nomExtension  = nomSimpleExt[nomSimpleExt.rfind('.')+1:].upper() # extension

                ####
                try:
#                    nameFamily    = matplotlib.font_manager.FontProperties(fname=fonte).get_family()            ##['sans-serif']
#                    nameStyle     = matplotlib.font_manager.FontProperties(fname=fonte).get_style()              #normal
#                    nameVariant   = matplotlib.font_manager.FontProperties(fname=fonte).get_variant()            #normal
#                    nameWeight    = matplotlib.font_manager.FontProperties(fname=fonte).get_weight()             #normal
#                    nameStretch   = matplotlib.font_manager.FontProperties(fname=fonte).get_stretch()            #normal
#                    nameFileComp  = matplotlib.font_manager.FontProperties(fname=fonte).get_file()              ##c:\windows\fonts\NotoNaskhArabicUI-Regular.ttf
#                    nameSize      = matplotlib.font_manager.FontProperties(fname=fonte).get_size()               #10.0
                    nameName      = matplotlib.font_manager.FontProperties(fname=fonte).get_name()              ##Noto Naskh Arabic UI
#                    nameSizePoint = matplotlib.font_manager.FontProperties(fname=fonte).get_size_in_points()     #10.0
#                    nameSlant     = matplotlib.font_manager.FontProperties(fname=fonte).get_slant()              #normal
#                    namePattern   = matplotlib.font_manager.FontProperties(fname=fonte).get_fontconfig_pattern() #:family=sans-serif:style=normal:variant=normal:weight=normal:stretch=normal:file=c:\windows\fonts\NotoNaskhArabicUI-Regular.ttf:size=10.0
                except Exception:
                    nameFamily = nameStyle = nameVariant = nameWeight = nameStretch = nameFileComp = nameSize = nameName = nameSizePoint = nameSlant = namePattern = ""
                ####
                if nameName == "" :
                    nameName = nomSimple
                self.tableau.append([0, nomPathPolice, nomSimple, nomSimpleExt.upper(), nomExtension.upper(), nameName])
                
            self.tableau = sorted(self.tableau, key=itemgetter(3))          # sorted by nomSimple.upper()

            try:
                for line in range(len(self.tableau)):                       # enleve les doubles (bon)
                    if self.tableau[line][2] == self.tableau[line + 1][2]:  # enleve les doubles (bon)
                        del(self.tableau[line + 1])                         # enleve les doubles (bon)
            except Exception:
                None

            self.comboBoxPy.clear()
            for line in range(len(self.tableau)): 
                try:
                    self.tableau[line][0] = line                 # ajoute le numero de ligne
                    if self.tableau[line][2].upper() == setFontByDefault.upper(): # detecte la fonte de base
                        self.index = line
                        PolicePath = self.tableau[line][1]
                    ####Section common color and font begin ######################
                    model = self.comboBoxPy.model()

                    if switchModeTextList == 1:
                        if self.tableau[line][4] == "TTF":
                            item = QtGui.QStandardItem(QtGui.QPixmap(setIconTTF), str(line))
                            item.setForeground(QtGui.QColor(setColorTTF))
                        elif self.tableau[line][4] == "FON":
                            item = QtGui.QStandardItem(QtGui.QPixmap(setIconFON), str(line))
                            item.setForeground(QtGui.QColor(setColorFON))
                        elif self.tableau[line][4] == "OTF":
                            item = QtGui.QStandardItem(QtGui.QPixmap(setIconOTF), str(line))
                            item.setForeground(QtGui.QColor(setColorOTF))
                        else:
                            item = QtGui.QStandardItem(QtGui.QPixmap(setIconPOL), str(line))
                            item.setForeground(QtGui.QColor(setColorPOL))

                        if   seTtextAlignement == 0:
                            item.setTextAlignment(QtCore.Qt.AlignLeft)
                        elif seTtextAlignement == 1:
                            item.setTextAlignment(QtCore.Qt.AlignCenter)
                        elif seTtextAlignement == 2:
                            item.setTextAlignment(QtCore.Qt.AlignRight)
                        else:
                            self.comboBoxPy.addItem(self.tableau[line][2])    
                        model.appendRow(item)
                    else:
                        self.comboBoxPy.addItem("")
                    self.comboBoxPy.setItemText(line, self.tableau[line][2])
                    ####Section item color and font end ##########################
    
                    ####Section setfont Family switchFontComBox begin#############
                    if (switchFontComBox == 1) and (switchModeTextList == 1):
                        typeCar = font = ""
                        font = QtGui.QFont()
                        #font = item.font()
        
                        typeCar   = family(self.tableau[line][2])[1]
                        font.setBold(False)
                        font.setItalic(False)
        
                        if len(typeCar) > 0:
                            for option in typeCar:
                                if option == "Bold":
                                    font.setBold(True)
                                if (option == "Italic") or (option == "It") or (option == "Slanted"):
                                    font.setItalic(True)
                                if option == "Oblique":
                                    font.setItalic(True)
                        #'Bold''Regular''Slanted''Italic''Medium''Extra''Light''Condensed''Black''It''Semibold'
                        
                        font.setFamily(self.tableau[line][5])
                        font.setPixelSize(15)
                        if switchModeTextList == 1:
                            item.setFont(font)
                        else:
                            self.comboBoxPy.addItem("")
                    ####Section setfont Family switchFontComBox end###############

                except Exception:
                    FreeCAD.Console.PrintMessage("searchFont()" + "\n")
                    None

            self.lineEdit_NameFile.setText("(" + str(self.index + 1) + "/" + str(len(self.tableau)) + ") " + self.tableau[self.index][1])
            self.comboBoxPy.setCurrentIndex(self.index)
            self.fonteComp = self.tableau[self.index][1]
            MyLabelPatience.label.close()
            #### matplotlib fin 2/5 apres __init__ #################################################################

    def setupUi(self, MainWindow):
        self.window = MainWindow

        global ui
        global PolicePath
        global rayon
        global texte
        global rotation
        global SizeCaractere
        global debout
        global exterieur

        global precision
        global correctionAngle
        global correctionRayon
        global baseHelix
        global endHelix
        global nombreCarParTour

        global epaisseur
        global epaisSupp
        
        global setPathOrthogonal
        global setPathTangent
        global setPositionBase
        global setPositionCenter
        global setPositionTop

        MainWindow.setObjectName(_fromUtf8("MainWindow"))
#        MainWindow.resize(360, 400)
#        MainWindow.setMaximumSize(QtCore.QSize(370, 638))
#        MainWindow.setMinimumSize(QtCore.QSize(400, 640))

        self.centralWidget = QtWidgets.QWidget(MainWindow)
        self.centralWidget.setObjectName(_fromUtf8("centralWidget"))
        self.groupBox_00 = QtWidgets.QGroupBox()

        self.groupBox_01 = QtWidgets.QGroupBox()
#        self.groupBox_01.setMaximumHeight(180)

        ####
        self.textEdit = QtWidgets.QTextEdit()
#        self.textEdit.setStyleSheet("background-color: white; color: red; ")
        self.textEdit.textChanged.connect(self.on_textEdit_Changed)
        ####
        self.frame_Option = QtWidgets.QFrame()
        self.frame_Option.setFrameShape(QtWidgets.QFrame.StyledPanel)
        self.frame_Option.setFrameShadow(QtWidgets.QFrame.Plain) #Raised) Sunken
#        self.textEdit.setMaximumHeight(100)
        self.PB_Reverse = QtWidgets.QPushButton()
        self.PB_Reverse.clicked.connect(self.on_PB_Reverse)
        self.CB_Word = QtWidgets.QCheckBox(self.groupBox_01)
        self.CB_Word.setText(_fromUtf8("Word"))
        self.CB_Word.clicked.connect(self.on_CB_Word)
        ####

        self.PB_Help = QtWidgets.QPushButton(MainWindow)
        self.PB_Help.setIcon(QtGui.QIcon(QtGui.QPixmap(helpIcon)))      # help icone dans une variable
        self.PB_Help.clicked.connect(self.on_PB_Help_clicked)               # help

        #### matplotlib debut 3/5 setupUi #################################################################
        self.lineEdit_NameFile = QtWidgets.QLineEdit()
        #self.lineEdit_NameFile.returnPressed.connect(self.on_lineEdit_NameFile) 
        self.comboBoxPy = QtWidgets.QComboBox()
        ####
        self.pathFont = PolicePath[:len(PolicePath)-(PolicePath[::-1].index("/"))-1]
        ####
        ui.searchFont(self.pathFont)
        QtCore.QObject.connect(self.comboBoxPy, QtCore.SIGNAL("currentIndexChanged(int)"), self.on_fontComboBoxPython)
        #### matplotlib fin 3/5 setupUi #################################################################
        ####
        self.groupBox_02 = QtWidgets.QGroupBox()

        self.DS_Radius_Circle = QtWidgets.QDoubleSpinBox()
        self.DS_Radius_Circle.setMinimum(-99999999.0)
        self.DS_Radius_Circle.setMaximum(99999999.0)
        self.DS_Radius_Circle.setValue(rayon)
        self.DS_Radius_Circle.valueChanged.connect(self.on_DS_Radius_Circle) #connection doubleSpinBox
        self.label_10 = QtWidgets.QLabel()

        self.DS_Size_Character = QtWidgets.QDoubleSpinBox()
        self.DS_Size_Character.setMinimum(0.0)
        self.DS_Size_Character.setMaximum(99999999.0)
        self.DS_Size_Character.setSingleStep(1.0)
        self.DS_Size_Character.setValue(SizeCaractere)
        self.DS_Size_Character.valueChanged.connect(self.on_DS_Size_Character) #connection doubleSpinBox
        self.label_4 = QtWidgets.QLabel()

        self.S_Begin_Angle = QtWidgets.QSpinBox()
        self.S_Begin_Angle.setMaximum(360.0)
        self.S_Begin_Angle.setValue(debut)
        self.S_Begin_Angle.valueChanged.connect(self.on_S_Begin_Angle) #connection SpinBox
        self.label_13 = QtWidgets.QLabel()

        self.S_End_Angle = QtWidgets.QSpinBox()
        self.S_End_Angle.setMaximum(360)
        self.S_End_Angle.setValue(rotation)
        self.S_End_Angle.valueChanged.connect(self.on_S_End_Angle) #connection SpinBox
        self.label_14 = QtWidgets.QLabel()

        self.DS_Correction_Angle = QtWidgets.QDoubleSpinBox()
        self.DS_Correction_Angle.setMinimum(-359.00)
        self.DS_Correction_Angle.setMaximum(359.00)
        self.DS_Correction_Angle.setValue(correctionAngle)
        self.DS_Correction_Angle.valueChanged.connect(self.on_DS_Correction_Angle) #connection doubleSpinBox
        self.label_7 = QtWidgets.QLabel()

        self.DS_Correction_Radius = QtWidgets.QDoubleSpinBox()
        self.DS_Correction_Radius.setMinimum(-99999999.0)
        self.DS_Correction_Radius.setMaximum(99999999.0)
        self.DS_Correction_Radius.setValue(correctionRayon)
        self.DS_Correction_Radius.valueChanged.connect(self.on_DS_Correction_Radius) #connection doubleSpinBox
        self.label_8 = QtWidgets.QLabel()

        self.DS_Extrude = QtWidgets.QDoubleSpinBox()
        self.DS_Extrude.setEnabled(False)
        self.DS_Extrude.setMinimum(-99999999.0)
        self.DS_Extrude.setMaximum(99999999.0)
        self.DS_Extrude.setValue(epaisseur)
        self.DS_Extrude.valueChanged.connect(self.on_DS_Extrude) #connection doubleSpinBox

        self.CH_Extrude = QtWidgets.QCheckBox()
        self.CH_Extrude.clicked.connect(self.on_CH_Extrude) #connection checkBox

        self.DS_PlacementX = QtWidgets.QDoubleSpinBox()
        self.DS_PlacementX.setEnabled(False)
        self.DS_PlacementX.setSpecialValueText(_fromUtf8(""))
        self.DS_PlacementX.setMinimum(-9999999.0)
        self.DS_PlacementX.setMaximum(9999999.99)
        self.DS_PlacementX.valueChanged.connect(self.on_DS_PlacementX) #connection doubleSpinBox

        self.DS_PlacementY = QtWidgets.QDoubleSpinBox()
        self.DS_PlacementY.setEnabled(False)
        self.DS_PlacementY.setSpecialValueText(_fromUtf8(""))
        self.DS_PlacementY.setMinimum(-9999999.0)
        self.DS_PlacementY.setMaximum(9999999.99)
        self.DS_PlacementY.valueChanged.connect(self.on_DS_PlacementY) #connection doubleSpinBox

        self.DS_PlacementZ = QtWidgets.QDoubleSpinBox()
        self.DS_PlacementZ.setEnabled(False)
        self.DS_PlacementZ.setSpecialValueText(_fromUtf8(""))
        self.DS_PlacementZ.setMinimum(-9999999.0)
        self.DS_PlacementZ.setMaximum(9999999.99)
        self.DS_PlacementZ.valueChanged.connect(self.on_DS_PlacementZ) #connection doubleSpinBox

        self.CH_Sp_Placement = QtWidgets.QCheckBox()
        self.CH_Sp_Placement.clicked.connect(self.on_CH_Sp_Placement) #connection checkBox

        self.DS_InclinaisonX = QtWidgets.QSpinBox()
        self.DS_InclinaisonX.setEnabled(False)
        self.DS_InclinaisonX.setMinimum(-360.0)
        self.DS_InclinaisonX.setMaximum(360.0)
        self.DS_InclinaisonX.setValue(inclinaisonX)
        self.DS_InclinaisonX.valueChanged.connect(self.on_DS_InclinaisonX) #connection doubleSpinBox

        self.DS_InclinaisonY = QtWidgets.QSpinBox()
        self.DS_InclinaisonY.setEnabled(False)
        self.DS_InclinaisonY.setMinimum(-360)
        self.DS_InclinaisonY.setMaximum(360)
        self.DS_InclinaisonY.setValue(inclinaisonY)
        self.DS_InclinaisonY.valueChanged.connect(self.on_DS_InclinaisonY) #connection doubleSpinBox

        self.DS_InclinaisonZ = QtWidgets.QSpinBox()
        self.DS_InclinaisonZ.setEnabled(False)
        self.DS_InclinaisonZ.setMinimum(-360.0)
        self.DS_InclinaisonZ.setMaximum(360.0)
        self.DS_InclinaisonZ.setValue(inclinaisonZ)
        self.DS_InclinaisonZ.valueChanged.connect(self.on_DS_InclinaisonZ) #connection doubleSpinBox

        self.CH_Sp_Inclination = QtWidgets.QCheckBox()
        self.CH_Sp_Inclination.clicked.connect(self.on_CH_Sp_Inclination) #connection checkBox
        ####
        self.groupBox_03 = QtWidgets.QGroupBox()

        self.RA_Choice_Outdoor = QtWidgets.QRadioButton()
        self.RA_Choice_Outdoor.setChecked(True)
        self.RA_Choice_Outdoor.clicked.connect(self.on_RA_Choice_Outdoor) #connection radioButton

        self.RA_Choice_Indoor = QtWidgets.QRadioButton()
        self.RA_Choice_Indoor.clicked.connect(self.on_RA_Choice_Indoor) #connection radioButton

        self.RA_Choice_Helix = QtWidgets.QRadioButton()
        self.RA_Choice_Helix.clicked.connect(self.on_RA_Choice_Helix) #connection radioButton

        self.RA_Choice_Clock = QtWidgets.QRadioButton()
        self.RA_Choice_Clock.clicked.connect(self.on_RA_Choice_Clock) #connection radioButton

        self.PU_Flat = QtWidgets.QPushButton()
        self.PU_Flat.setEnabled(True)
        self.PU_Flat.setIcon(QtGui.QIcon(QtGui.QPixmap(standIcon))) # icone dans une variable 
        self.PU_Flat.clicked.connect(self.on_PU_Flat)

        self.graphicsView = QtWidgets.QGraphicsView()
        ####Screen Graphic BitMap
        ##https://doc.qt.io/qtforpython/PySide2/QtCore/Qt.html
        self.graphicsView = QtWidgets.QGraphicsView()
        self.graphicsView.setObjectName("graphicsView")
        self.graphicsView.setFixedSize(215,60)
#        pic = QtGui.QPixmap(indoorIcon)    # png
#        self.scene = QtWidgets.QGraphicsScene()
#        self.scene.addPixmap(QtGui.QPixmap(pic))                        # png (bmp)
#        self.graphicsView.setScene(self.scene)
        ####Screen Graphic BitMap
        ####
        self.groupBox_04 = QtWidgets.QGroupBox()
        self.groupBox_04.setEnabled(False)
        self.groupBox_04.setCheckable(False)
        self.groupBox_04.setVisible(False)

        self.DS_Step_Of_The_Helix = QtWidgets.QDoubleSpinBox()
        self.DS_Step_Of_The_Helix.setMaximum(99999999.99)
        self.DS_Step_Of_The_Helix.setValue(pasHelix)
        self.DS_Step_Of_The_Helix.valueChanged.connect(self.on_DS_Step_Of_The_Helix) #connection doubleSpinBox
        self.label_12 = QtWidgets.QLabel()

        self.DS_Number_Char_Per_Turn = QtWidgets.QSpinBox()
        self.DS_Number_Char_Per_Turn.setMaximum(99999999)
        self.DS_Number_Char_Per_Turn.setValue(nombreCarParTour)
        self.DS_Number_Char_Per_Turn.valueChanged.connect(self.on_DS_Number_Char_Per_Turn) #connection doubleSpinBox
        self.label = QtWidgets.QLabel()

        self.DS_Base_Helix = QtWidgets.QDoubleSpinBox()
        self.DS_Base_Helix.setEnabled(False)
        self.DS_Base_Helix.setMinimum(-99999999.0)
        self.DS_Base_Helix.setMaximum(99999999.0)
        self.DS_Base_Helix.setValue(baseHelix)
        self.DS_Base_Helix.valueChanged.connect(self.on_DS_Base_Helix) #connection doubleSpinBox
        self.label_2 = QtWidgets.QLabel()
      
        self.DS_End_Helix = QtWidgets.QDoubleSpinBox()
        self.DS_End_Helix.setEnabled(False)
        self.DS_End_Helix.setMinimum(-99999999.0)
        self.DS_End_Helix.setMaximum(99999999.0)
        self.DS_End_Helix.setValue(endHelix)
        self.DS_End_Helix.valueChanged.connect(self.on_DS_End_Helix) #connection doubleSpinBox
        self.label_3 = QtWidgets.QLabel()
        ####
        self.groupBox_05 = QtWidgets.QGroupBox()
        self.groupBox_05.setEnabled(False)
        self.groupBox_05.setVisible(False)

        self.DS_Radius_Support = QtWidgets.QDoubleSpinBox()
        self.DS_Radius_Support.setMaximum(99999999.99)
        self.DS_Radius_Support.setValue(cercleClock)
        self.DS_Radius_Support.valueChanged.connect(self.on_DS_Radius_Support) #connection doubleSpinBox
        self.label_11 = QtWidgets.QLabel()

        self.PU_Roman = QtWidgets.QPushButton()
        self.PU_Roman.setIcon(QtGui.QIcon(QtGui.QPixmap(arabicIcon))) # icone dans une variable 
        self.PU_Roman.clicked.connect(self.on_PU_Roman)

        self.S_Number_Faces_Support = QtWidgets.QSpinBox()
        self.S_Number_Faces_Support.setMaximum(999)
        self.S_Number_Faces_Support.setValue(nombreFaces)
        self.S_Number_Faces_Support.valueChanged.connect(self.on_S_Number_Faces_Support) #connection SpinBox
        self.label_5 = QtWidgets.QLabel()

        self.PU_Redress = QtWidgets.QPushButton()
        self.PU_Redress.setIcon(QtGui.QIcon(QtGui.QPixmap(axialIcon))) # icone dans une variable 
        self.PU_Redress.clicked.connect(self.on_PU_Redress)

        self.DS_Extrude_Support = QtWidgets.QDoubleSpinBox()
        self.DS_Extrude_Support.setMaximum(99999999.0)
        self.DS_Extrude_Support.setEnabled(False)
        self.DS_Extrude_Support.setValue(epaisSupp)
        self.DS_Extrude_Support.valueChanged.connect(self.on_DS_Extrude_Support) #connection doubleSpinBox
        self.label_6 = QtWidgets.QLabel()
        ####
        self.groupBox_055 = QtWidgets.QGroupBox()
        self.groupBox_055.setEnabled(False)

        self.frame_Path = QtWidgets.QFrame()
        self.frame_Path.setFrameShape(QtWidgets.QFrame.StyledPanel)
        self.frame_Path.setFrameShadow(QtWidgets.QFrame.Plain) #Raised) Sunken
        self.RB_Path_01 = QtWidgets.QRadioButton()
        self.RB_Path_01.setChecked(setPathOrthogonal)
        self.RB_Path_02 = QtWidgets.QRadioButton()
        self.RB_Path_02.setChecked(setPathTangent)

        self.frame_Position = QtWidgets.QFrame()
        self.frame_Position.setFrameShape(QtWidgets.QFrame.StyledPanel)
        self.frame_Position.setFrameShadow(QtWidgets.QFrame.Plain) #.Raised) Sunken
        self.RB_Position_01 = QtWidgets.QRadioButton()
        self.RB_Position_01.setChecked(setPositionBase)
        self.RB_Position_02 = QtWidgets.QRadioButton()
        self.RB_Position_01.setChecked(setPositionCenter)
        self.RB_Position_03 = QtWidgets.QRadioButton()
        self.RB_Position_01.setChecked(setPositionTop)

        self.horizontalSlider_01_Str = QtWidgets.QSlider()
        self.horizontalSlider_01_Str.setOrientation(QtCore.Qt.Horizontal)
        self.label_Path_01 = QtWidgets.QLabel()
        self.horizontalSlider_02_Car = QtWidgets.QSlider()
        self.horizontalSlider_02_Car.setOrientation(QtCore.Qt.Horizontal)
        self.label_Path_02 = QtWidgets.QLabel()
        self.horizontalSlider_03_Tra = QtWidgets.QSlider()
        self.horizontalSlider_03_Tra.setOrientation(QtCore.Qt.Horizontal)
        self.label_Path_03 = QtWidgets.QLabel()

        ####
        self.groupBox_06 = QtWidgets.QGroupBox()

        self.CB_01_Points = QtWidgets.QCheckBox()
        self.CB_02_Circle = QtWidgets.QCheckBox()
        self.CB_03_BBox = QtWidgets.QCheckBox()
        self.CB_04_Progression = QtWidgets.QCheckBox()

        self.PU_Exit = QtWidgets.QPushButton()
        self.PU_Exit.setIcon(QtGui.QIcon(QtGui.QPixmap(quitIcon))) # quit icone dans une variable 
        #self.PU_Exit.setIconSize(QtCore.QSize(26, 26))
        self.PU_Exit.clicked.connect(self.on_PU_Exit)

        self.PU_Reset = QtWidgets.QPushButton()
        self.PU_Reset.setEnabled(True)
        self.PU_Reset.setIcon(QtGui.QIcon(QtGui.QPixmap(resetIcon)))  # reset icone dans une variable 
        self.PU_Reset.clicked.connect(self.on_PU_Reset)

        self.PU_Benchmarks = QtWidgets.QPushButton()
        self.PU_Benchmarks.setIcon(QtGui.QIcon(QtGui.QPixmap(executeIcon)))# execute icone dans une variable 
        self.PU_Benchmarks.clicked.connect(self.on_PU_Benchmarks)

        self.PU_Execute = QtWidgets.QPushButton()
        self.PU_Execute.setIcon(QtGui.QIcon(QtGui.QPixmap(executeIcon)))# execute icone dans une variable 
        self.PU_Execute.clicked.connect(self.on_PU_Execute)
        ####
        #### self.DS_Pivot_Char # pas utilise
        self.DS_Pivot_Char = QtWidgets.QDoubleSpinBox()
        self.DS_Pivot_Char.setEnabled(False)
        self.DS_Pivot_Char.setMinimum(-360.0)
        self.DS_Pivot_Char.setMaximum(360.0)
        self.DS_Pivot_Char.setValue(0.0)
        self.DS_Pivot_Char.valueChanged.connect(self.on_DS_Pivot_Char) #connection doubleSpinBox

        self.CH_Pivot_Character = QtWidgets.QCheckBox()
        self.CH_Pivot_Character.clicked.connect(self.on_CH_Pivot_Character) #connection checkBox
        ####
        ####
        #### gridLayout begin #######################
        self.gridLayout = QtWidgets.QGridLayout(self.centralWidget)
        self.gridLayout.setContentsMargins(10, 10, 10, 10)
        ##
        self.gridLayout_2 = QtWidgets.QGridLayout(self.groupBox_00)
        self.groupBox_00.setMaximumHeight(660)
        self.gridLayout_2.setContentsMargins(10, 10, 10, 10)
#        self.gridLayout_2.setSpacing(6)
        ##
        self.gridLayout_Texte = QtWidgets.QGridLayout(self.groupBox_01)  # groupes .....
        self.groupBox_01.setMaximumHeight(160)
#        self.gridLayout_Texte.setSpacing(6)
        self.gridLayout_Texte.setContentsMargins(10, 10, 10, 10)
        self.gridLayout_Texte.addWidget(self.textEdit, 0, 0, 1, 1)
        ##
        self.gridLayout_frame_Option = QtWidgets.QGridLayout(self.frame_Option)
        self.gridLayout_frame_Option.setContentsMargins(10, 10, 10, 10)
        self.gridLayout_frame_Option.addWidget(self.PB_Reverse, 0, 0, 1, 1)
        self.gridLayout_frame_Option.addWidget(self.CB_Word, 1, 0, 1, 1)
        self.gridLayout_Texte.addWidget(self.frame_Option, 0, 1, 1, 1)
        ##
        self.gridLayout_Texte.addWidget(self.lineEdit_NameFile,1, 0, 1, 1)#_Font
        self.gridLayout_Texte.addWidget(self.PB_Help,2, 1, 1, 1)
        self.gridLayout_Texte.addWidget(self.comboBoxPy,2, 0, 1, 1)
        self.gridLayout_2.addWidget(self.groupBox_01, 0, 0, 1, 1)
        ####
        self.gridLayout_Config = QtWidgets.QGridLayout(self.groupBox_02)
        self.gridLayout_Config.setContentsMargins(10, 10, 10, 10)
        self.groupBox_02.setMaximumHeight(450)
        self.groupBox_02.setMinimumHeight(255)
#        self.gridLayout_Config.setSpacing(6)
        self.gridLayout_Config.addWidget(self.groupBox_03, 0, 0, 7, 2)
#        self.groupBox_03.setMaximumHeight(300)
        self.gridLayout_Choice = QtWidgets.QGridLayout(self.groupBox_03)
        self.gridLayout_Choice.addWidget(self.RA_Choice_Outdoor, 0, 0, 1, 1)
        self.gridLayout_Choice.addWidget(self.RA_Choice_Indoor, 1, 0, 1, 1)
        self.gridLayout_Choice.addWidget(self.RA_Choice_Helix, 0, 1, 1, 1)
        self.gridLayout_Choice.addWidget(self.RA_Choice_Clock, 1, 1, 1, 1)
        self.gridLayout_Choice.addWidget(self.PU_Flat, 2, 0, 1, 2)
        self.gridLayout_Choice.addWidget(self.graphicsView, 3, 0, 1, 2)
        ##
        self.gridLayout_Config.addWidget(self.DS_Radius_Circle, 0, 2, 1, 1)
        self.gridLayout_Config.addWidget(self.label_10, 0, 3, 1, 1)
        self.gridLayout_Config.addWidget(self.DS_Size_Character, 1, 2, 1, 1)
        self.gridLayout_Config.addWidget(self.label_4, 1, 3, 1, 1)
        self.gridLayout_Config.addWidget(self.S_Begin_Angle, 2, 2, 1, 1)
        self.gridLayout_Config.addWidget(self.label_13, 2, 3, 1, 1)
        self.gridLayout_Config.addWidget(self.S_End_Angle, 3, 2, 1, 1)
        self.gridLayout_Config.addWidget(self.label_14, 3, 3, 1, 1)
        self.gridLayout_Config.addWidget(self.DS_Correction_Angle, 4, 2, 1, 1)
        self.gridLayout_Config.addWidget(self.label_7, 4, 3, 1, 1)
        self.gridLayout_Config.addWidget(self.DS_Correction_Radius, 5, 2, 1, 1)
        self.gridLayout_Config.addWidget(self.label_8, 5, 3, 1, 1)
        self.gridLayout_Config.addWidget(self.DS_Extrude, 6, 2, 1, 1)
        self.gridLayout_Config.addWidget(self.CH_Extrude, 6, 3, 1, 1)
        self.gridLayout_Config.addWidget(self.DS_PlacementX, 7, 0, 1, 1)
        self.gridLayout_Config.addWidget(self.DS_PlacementY, 7, 1, 1, 1)
        self.gridLayout_Config.addWidget(self.DS_PlacementZ, 7, 2, 1, 1)
        self.gridLayout_Config.addWidget(self.CH_Sp_Placement, 7, 3, 1, 1)
        self.gridLayout_Config.addWidget(self.DS_InclinaisonX, 8, 0, 1, 1)
        self.gridLayout_Config.addWidget(self.DS_InclinaisonY, 8, 1, 1, 1)
        self.gridLayout_Config.addWidget(self.DS_InclinaisonZ, 8, 2, 1, 1)
        self.gridLayout_Config.addWidget(self.CH_Sp_Inclination, 8, 3, 1, 1)
        self.gridLayout_2.addWidget(self.groupBox_02, 1, 0, 1, 1)
        ####
        self.gridLayout_Helix = QtWidgets.QGridLayout(self.groupBox_04)
        self.gridLayout_Helix.setContentsMargins(10, 10, 10, 10)
        self.groupBox_04.setMaximumHeight(110)
        self.groupBox_04.setMinimumHeight(110)
#        self.gridLayout_Helix.setSpacing(6)
        self.gridLayout_Helix.addWidget(self.DS_Step_Of_The_Helix, 0, 0, 1, 1)
        self.gridLayout_Helix.addWidget(self.label_12, 0, 1, 1, 1)
        self.gridLayout_Helix.addWidget(self.DS_Number_Char_Per_Turn, 0, 2, 1, 1)
        self.gridLayout_Helix.addWidget(self.label, 0, 3, 1, 1)
        self.gridLayout_Helix.addWidget(self.DS_Base_Helix, 1, 0, 1, 1)
        self.gridLayout_Helix.addWidget(self.label_2, 1, 1, 1, 1)
        self.gridLayout_Helix.addWidget(self.DS_End_Helix, 1, 2, 1, 1)
        self.gridLayout_Helix.addWidget(self.label_3, 1, 3, 1, 1)
        self.gridLayout_2.addWidget(self.groupBox_04, 3, 0, 1, 1)
        ####
        self.gridLayout_Clock = QtWidgets.QGridLayout(self.groupBox_05)
        self.gridLayout_Clock.setContentsMargins(10, 10, 10, 10)
        self.groupBox_05.setMaximumHeight(110)
        self.groupBox_05.setMinimumHeight(110)
#        self.gridLayout_Clock.setSpacing(6)
        self.gridLayout_Clock.addWidget(self.DS_Radius_Support, 0, 0, 1, 1)
        self.gridLayout_Clock.addWidget(self.label_11, 0, 1, 1, 1)
        self.gridLayout_Clock.addWidget(self.PU_Roman, 0, 2, 1, 1)
        self.gridLayout_Clock.addWidget(self.S_Number_Faces_Support, 1, 0, 1, 1)
        self.gridLayout_Clock.addWidget(self.label_5, 1, 1, 1, 1)
        self.gridLayout_Clock.addWidget(self.PU_Redress, 1, 2, 1, 1)
        self.gridLayout_Clock.addWidget(self.DS_Extrude_Support, 2, 0, 1, 1)
        self.gridLayout_Clock.addWidget(self.label_6, 2, 1, 1, 1)
        self.gridLayout_2.addWidget(self.groupBox_05, 4, 0, 1, 1)
        ####

        self.gridLayout_Path = QtWidgets.QGridLayout(self.groupBox_055)
        self.gridLayout_Path.setContentsMargins(10, 10, 10, 10)
        self.groupBox_055.setMaximumHeight(110)
        self.groupBox_055.setMinimumHeight(110)
        ##
        self.gridLayout_frame_Path = QtWidgets.QGridLayout(self.frame_Path)
#        self.gridLayout_frame_Path.setContentsMargins(10, 10, 10, 10)
        self.gridLayout_frame_Path.addWidget(self.RB_Path_01, 0, 1, 1, 1)
        self.gridLayout_frame_Path.addWidget(self.RB_Path_02, 0, 2, 1, 1)
        self.gridLayout_Path.addWidget(self.frame_Path, 0, 0, 1, 1)
        ##
        self.gridLayout_frame_Position = QtWidgets.QGridLayout(self.frame_Position)
#        self.gridLayout_frame_Position.setContentsMargins(10, 10, 10, 10)
        self.gridLayout_frame_Position.addWidget(self.RB_Position_01, 0, 0, 1, 1)
        self.gridLayout_frame_Position.addWidget(self.RB_Position_02, 0, 1, 1, 1)
        self.gridLayout_frame_Position.addWidget(self.RB_Position_03, 0, 2, 1, 1)
        self.gridLayout_Path.addWidget(self.frame_Position, 1, 0, 1, 1)
#        ##
#        self.gridLayout_Path.addWidget(self.horizontalSlider_01_Str, 2, 0, 1, 1)
#        self.gridLayout_Path.addWidget(self.label_Path_01, 2, 1, 1, 1)
#        self.gridLayout_Path.addWidget(self.horizontalSlider_02_Car, 3, 0, 1, 1)
#        self.gridLayout_Path.addWidget(self.label_Path_02, 3, 1, 1, 1)
#        self.gridLayout_Path.addWidget(self.horizontalSlider_03_Tra, 4, 0, 1, 1)
#        self.gridLayout_Path.addWidget(self.label_Path_03, 4, 1, 1, 1)
#        ##
        self.gridLayout_2.addWidget(self.groupBox_055, 5, 0, 1, 1)
        ####
        self.gridLayout_Command = QtWidgets.QGridLayout(self.groupBox_06)
        self.gridLayout_Command.setContentsMargins(10, 10, 10, 10)
        self.groupBox_06.setMaximumHeight(100)
#        self.gridLayout_Command.setSpacing(6)
        self.gridLayout_Command.addWidget(self.CB_01_Points, 0, 0, 1, 1)
        self.gridLayout_Command.addWidget(self.CB_02_Circle, 0, 1, 1, 1)
        self.gridLayout_Command.addWidget(self.CB_03_BBox, 0, 2, 1, 1)
        self.gridLayout_Command.addWidget(self.CB_04_Progression, 0, 3, 1, 1)
        self.gridLayout_Command.addWidget(self.PU_Exit, 1, 0, 1, 1)
        self.gridLayout_Command.addWidget(self.PU_Reset, 1, 1, 1, 1)
        self.gridLayout_Command.addWidget(self.PU_Benchmarks, 1, 2, 1, 1)
        self.gridLayout_Command.addWidget(self.PU_Execute, 1, 3, 1, 1)
        self.gridLayout_2.addWidget(self.groupBox_06, 6, 0, 1, 1)
        ####
        self.gridLayout.addWidget(self.groupBox_00, 0, 0, 1, 1)
        #### gridLayout end #######################

        MainWindow.setCentralWidget(self.centralWidget)
        self.retranslateUi(MainWindow)
        QtCore.QMetaObject.connectSlotsByName(MainWindow)

    def retranslateUi(self, MainWindow):
        MainWindow.setWindowFlags(PySide2.QtCore.Qt.WindowStaysOnTopHint)                         # PySide cette fonction met la fenetre en avant
        MainWindow.setWindowTitle(_fromUtf8(__Title__))
        MainWindow.setWindowIcon(QtGui.QIcon(_fromUtf8(self.path + "FCCircularTextButtom.png")))  # change l'icone de la fenetre principale
        self.groupBox_00.setTitle(_fromUtf8("Ver : " + __Version__ + " : " +  __Date__) + " (rmu)")

        self.groupBox_01.setTitle(_fromUtf8("Text to be displayed  ( "+str(len(texte))+" characters )"))
        self.textEdit.setHtml(_fromUtf8(texte))
        self.textEdit.setToolTip(_fromUtf8("Your text to be displayed" + "\n"
                                           "the last character superpose de first character ! " + "\n"
                                           "you must adding one space after the last character"))
        self.PB_Reverse.setText(_fromUtf8("Reverse"))
        self.PB_Reverse.setToolTip(_fromUtf8("Reverse the text edited"))
        try:
            self.lineEdit_NameFile.setText(_fromUtf8("(" + str(self.index + 1) + "/" + str(len(self.tableau)) + ") " + self.tableau[self.index][1]))
        except Exception:
            None
        self.lineEdit_NameFile.setToolTip(_fromUtf8("(Number index / Number Fonts) Complete path and name of Font file"))
        self.PB_Help.setText(_fromUtf8("Help"))
        self.CB_Word.setText(_fromUtf8("Word"))
        self.CB_Word.setToolTip(_fromUtf8("If Word is checked, the text are clipped to each space" + "\n"
                                          "one space egual one character." + "\n\n"
                                          "If in mode Path you work with a circle," + "\n"
                                          "the last character superpose de first character ! " + "\n"
                                          "you must adding one space after the last character" + "\n"
                                          "for spacing the last and the first character" + "\n\n"
                                          "You must work with the space as the character"))
#        self.PB_Decompose.setText(_fromUtf8("Decompose"))

        #### matplotlib debut 4/5 retranslateUi #################################################################
        self.comboBoxPy.setToolTip("Choice your Font" + "\n" +
                                   "\n" +
                                   "You must modify the configuration of display" + "\n" +
                                   "Menu Edit parameter: User parameter:BaseApp/Preferences/Macros/FCMmacros/" + __Title__ + ":" + "\n" +
                                   "####" + "\n" +
                                   "switchModeTextList= 1\t# 0 = mode text normal (the switchFontComBox is enabled)" + "\n"
                                   "\t\t\t# 1 = switchFontComBox authorized (default)" + "\n"
                                   "\t\t\t#####" + "\n"
                                   "switchFontComBox  = 1\t# 0 = mode text in color .. faster" + "\n"
                                   "\t\t\t# 1 = fontFamily listed ComboBox slower but beautiful (default)" + "\n"
                                   "\t\t\t#####" + "\n"
                                   "setSystemFonts    = 1\t# 0 = matplotlib.font_manager.findSystemFonts" + "\n"
                                   "\t\t\t#   all fonts in System font" + "\n"
                                   "\t\t\t# 1 = fontman.findSystemFonts(self.pathFont) (default)" + "\n"
                                   "\t\t\t# all fonts in all directory and sub directory" + "\n"
                                   "\t\t\t#####" + "\n"
                                   "seTtextAlignement = 0\t# 0 = AlignLeft (default)" + "\n"
                                   "\t\t\t# 1 = AlignCenter" + "\n"
                                   "\t\t\t# 2 = AlignRight" + "\n"
                                   "\t\t\t#####" + "\n"
                                   "setFontByDefault = ""ARIAL""\t # ARIAL" + "\n"
                                   "\t\t\t#####" + "\n"
                                   "switchResetFALSE = 0\t # 0 by default." + "\n"
                                   "If you use this option [ switchResetFALSE = 1 ] some switch can be opened when it should not be" + "\n"
                                   "then it is advisable to do a reset after a change one option" + "\n"
                                   "####" + "\n"
                                   "Actual configuration : " + str(switchModeTextList) + ", " + str(switchFontComBox) + ", " + str(setSystemFonts) + ", "
                                                             + str(seTtextAlignement) + ", " + setFontByDefault + ", " + str(switchResetFALSE) + "\n"
                                   "####" + "\n" +
                                   "Read the info")
        #### matplotlib fin 4/5 retranslateUi #################################################################

        self.groupBox_02.setTitle(_fromUtf8("Configuration"))
        self.DS_Radius_Circle.setToolTip(_fromUtf8("Give the radius of circle"))
        self.DS_Radius_Circle.setSuffix(_fromUtf8(" mm"))
        self.label_10.setText(_fromUtf8("Radius of circle"))
        self.DS_Size_Character.setToolTip(_fromUtf8("Size of the font"))
        self.DS_Size_Character.setSuffix(_fromUtf8(" mm"))
        self.label_4.setText(_fromUtf8("Character size"))
        self.S_Begin_Angle.setToolTip(_fromUtf8("Starting text of the circle "))
        self.S_Begin_Angle.setSuffix(_fromUtf8(" deg"))
        self.label_13.setText(_fromUtf8("Starting angle"))
        self.S_End_Angle.setToolTip(_fromUtf8("End text of the circle "))
        self.S_End_Angle.setSuffix(_fromUtf8(" deg"))
        self.label_14.setText(_fromUtf8("Ending angle"))
        self.DS_Correction_Angle.setToolTip(_fromUtf8("Correct angle for tangent the text of thr circle or give a tilt angle" + "\n"
                                                      "this option is adding to the original angle (Sp. inclination)"))
        self.DS_Correction_Angle.setSuffix(_fromUtf8(" deg"))
        self.label_7.setText(_fromUtf8("Correction Angle"))
        self.DS_Correction_Radius.setToolTip(_fromUtf8("Correct of the radius (depend of correction angle)" + "\n"
                                                       "this option is adding to the original radius (Radius of circle)"))
        self.DS_Correction_Radius.setSuffix(_fromUtf8(" mm"))
        self.label_8.setText(_fromUtf8("Correction Radius"))
        self.DS_Extrude.setSuffix(_fromUtf8(" mm"))
        self.DS_Extrude.setToolTip(_fromUtf8("Thickness of the extrude of character. If thickness = 0 then not extrude"))
        self.CH_Extrude.setText(_fromUtf8("Extrude Char."))
        self.CH_Extrude.setToolTip(_fromUtf8("Choice extrude character or not"))
        ####
        self.DS_PlacementX.setSuffix(_fromUtf8(" X mm"))
        self.DS_PlacementX.setToolTip(_fromUtf8("Placement direction X" + "\n" 
                                                "Not used with the Clock option"))
        self.DS_PlacementY.setSuffix(_fromUtf8(" Y mm"))
        self.DS_PlacementY.setToolTip(_fromUtf8("Placement direction Y" + "\n" 
                                                "Not used with the Clock option"))
        self.DS_PlacementZ.setSuffix(_fromUtf8(" Z mm"))
        self.DS_PlacementZ.setToolTip(_fromUtf8("Placement direction Z"+ "\n"
                                                "For Clock option only this Z axis is available"))
        self.CH_Sp_Placement.setText(_fromUtf8("Placement"))
        self.CH_Sp_Placement.setToolTip(_fromUtf8("Placement of character in the choice"))
        #carDegrees = b' \xc2\xb0'.decode("utf-8")    #thanks wmayer	https://forum.freecadweb.org/viewtopic.php?f=13&t=36380&p=308476#p308357
        self.DS_InclinaisonX.setSuffix(_fromUtf8(" deg"))
        self.DS_InclinaisonX.setToolTip(_fromUtf8("Inclination character in axis X"))
        self.DS_InclinaisonY.setSuffix(_fromUtf8(" deg"))
        self.DS_InclinaisonY.setToolTip(_fromUtf8("Inclination character axis Y"))
        self.DS_InclinaisonZ.setSuffix(_fromUtf8(" deg"))
        self.DS_InclinaisonZ.setToolTip(_fromUtf8("Inclination character axis Z"))
        self.CH_Sp_Inclination.setText(_fromUtf8("Sp. inclination"))
        self.CH_Sp_Inclination.setToolTip(_fromUtf8("Inclination of character in the choice or alls plane "))
        ####
        self.groupBox_03.setTitle(_fromUtf8("Choice"))
        self.RA_Choice_Outdoor.setText(_fromUtf8("Outdoor"))
        self.RA_Choice_Outdoor.setToolTip(_fromUtf8("Create the text on the outer face of the cylinder"))
        self.RA_Choice_Indoor.setText(_fromUtf8("Indoor"))
        self.RA_Choice_Indoor.setToolTip(_fromUtf8("Create the text on the inside of the cylinder"))
        self.RA_Choice_Helix.setText(_fromUtf8("Helix"))
        self.RA_Choice_Helix.setToolTip(_fromUtf8("Create the text in a helix"))
        self.RA_Choice_Clock.setText(_fromUtf8("Clock"))
        self.RA_Choice_Clock.setToolTip(_fromUtf8("Create the text to form a clock"))
        self.PU_Flat.setText(_fromUtf8("Mode Stand"))
        self.PU_Flat.setToolTip(_fromUtf8("Click for create the text Flat"))
        ####
        self.groupBox_04.setTitle(_fromUtf8("Helix"))
        self.DS_Step_Of_The_Helix.setSuffix(_fromUtf8(" mm"))
        self.DS_Step_Of_The_Helix.setToolTip(_fromUtf8("Step of the text along the helix (min Size Caractere)"))
        self.label_12.setText(_fromUtf8("Step of Helix"))
        self.DS_Number_Char_Per_Turn.setToolTip(_fromUtf8("Number of characters for one turn of helix"))
        self.label.setText(_fromUtf8("Char. per turn"))
        self.DS_Base_Helix.setToolTip(_fromUtf8("Base (begin) of helix (to activate Step of Helix must be zero)"))
        self.DS_Base_Helix.setSuffix(_fromUtf8(" mm"))
        self.label_2.setText(_fromUtf8("Base Helix"))
        self.DS_End_Helix.setToolTip(_fromUtf8("Final height of the helix (to activate Step of Helix must be zero)"))
        self.DS_End_Helix.setSuffix(_fromUtf8(" mm"))
        self.label_3.setText(_fromUtf8("End Helix"))
        ####
        self.groupBox_05.setTitle(_fromUtf8("Clock"))
        self.DS_Radius_Support.setSuffix(_fromUtf8(" mm"))
        self.DS_Radius_Support.setToolTip(_fromUtf8("Radius of the support the clock (By defaut : Radius of circle)"))
        self.label_11.setText(_fromUtf8("Radius of support"))
        self.PU_Roman.setText(_fromUtf8("Mode Arabic"))
        self.PU_Roman.setToolTip(_fromUtf8("The characters is in Roman or Arabic (default)"))
        self.S_Number_Faces_Support.setToolTip(_fromUtf8("Number of side of the support 0=none, 1=circle, 2=rectangle, 3=triangle, 4=square, 5=pentagon . . . . (Thickness egal extrude)"))
        self.label_5.setText(_fromUtf8("Support number face"))
        self.PU_Redress.setText(_fromUtf8("Axial"))
        self.PU_Redress.setToolTip(_fromUtf8("Click for activate the mode Redress"))
        self.DS_Extrude_Support.setToolTip(_fromUtf8("Thickness of the extrude the support." + "\n"
                                                     "If thickness = 0 then not extrude" + "\n"
                                                     "If thickness of support is bigger than character" + "\n"
                                                     "the SpinBox is colored in red" + "\n"
                                                     "if the CheckBox [Extrude Char.] is not checked" + "\n"
                                                     "the SpinBox is colored in orange for warn that the character is at the base of the support"))
        self.DS_Extrude_Support.setSuffix(_fromUtf8(" mm"))
        self.label_6.setText(_fromUtf8("Extrude support"))
        ####
        self.groupBox_055.setTitle(_fromUtf8("Path"))
        self.groupBox_055.setToolTip(_fromUtf8("The string follow the wire selected" + "\n"
                                               "The buttons Outdoor, Helix, Indoor, Clock and" + "\n"
                                               "the button Mode Stand / Flat are ignored"))
        self.RB_Path_01.setText(_fromUtf8("Orthogonal"))
        self.RB_Path_01.setToolTip(_fromUtf8("The character is orthogonal"))
        self.RB_Path_02.setText(_fromUtf8("Tangent"))
        self.RB_Path_02.setToolTip(_fromUtf8("The character is tangent on position wire selected"))

        self.RB_Position_01.setText(_fromUtf8("BB Base"))
        self.RB_Position_01.setToolTip(_fromUtf8("The BoundBox of the character is on Base"))
        self.label_Path_01.setText(_fromUtf8("Rotation str"))
        self.RB_Position_02.setText(_fromUtf8("BB Center"))
        self.RB_Position_02.setToolTip(_fromUtf8("The BoundBox of the character is on BB Center"))
        self.label_Path_02.setText(_fromUtf8("Rotation car"))
        self.RB_Position_03.setText(_fromUtf8("BB Top"))
        self.RB_Position_03.setToolTip(_fromUtf8("The BoundBox of the character is on BB Top"))
        self.label_Path_03.setText(_fromUtf8("Translation"))
        ####
        self.groupBox_06.setTitle(_fromUtf8("Command"))
        self.CB_01_Points.setText(_fromUtf8("Points"))
        self.CB_01_Points.setToolTip(_fromUtf8("Create points repere"))
        self.CB_02_Circle.setText(_fromUtf8("Circle"))
        self.CB_02_Circle.setToolTip(_fromUtf8("Create Circle repere"))
        self.CB_03_BBox.setText(_fromUtf8("BoundBox"))
        self.CB_03_BBox.setToolTip(_fromUtf8("Create BoundBox on character"))
        self.CB_04_Progression.setText(_fromUtf8("Progression"))
        self.CB_04_Progression.setToolTip(_fromUtf8("Visualise the character in construction"))
        self.PU_Exit.setText(_fromUtf8("Exit"))
        self.PU_Exit.setToolTip(_fromUtf8("Exit FCCircularText"))
        self.PU_Reset.setText(_fromUtf8("Reset"))
        self.PU_Reset.setToolTip(_fromUtf8("Reset the macro and give the number of the characters of windows Textedit"))
        self.PU_Execute.setText(_fromUtf8("Run"))
        self.PU_Execute.setToolTip("Execute the process") # without Compount
        self.PU_Benchmarks.setText(_fromUtf8("Run Comp"))
        self.PU_Benchmarks.setToolTip(_fromUtf8("Execute the process and one Compount of the characters is create"))
        ####
        self.DS_Pivot_Char.setSuffix(_fromUtf8(" deg"))
        self.DS_Pivot_Char.setToolTip(_fromUtf8("Pivot the character"))
        self.CH_Pivot_Character.setText(_fromUtf8("Pivot Character"))
        self.CH_Pivot_Character.setToolTip(_fromUtf8("Pivot the character"))

    #### matplotlib debut 5/5 #################################################################
    def on_fontComboBoxPython(self,indeX):                                          # 0: for fontComboBoxPython
        global PolicePath
        global setFontByDefault

        self.index = indeX
        self.lineEdit_NameFile.setText("(" + str(self.index + 1) + "/" + str(len(self.tableau)) + ") " + self.tableau[self.index][1])
        PolicePath = self.tableau[self.index][1]

        famille = typeCar = self.font = ""
        self.font = QtGui.QFont()
        typeCar   = family(self.tableau[self.index][2])[1]
        self.font.setBold(False)
        self.font.setItalic(False)

        if len(typeCar) > 0:
            for option in typeCar:
                if option == "Bold":
                    self.font.setBold(True)
                if (option == "Italic") or (option == "It") or (option == "Slanted"):
                    self.font.setItalic(True)
                if option == "Oblique":
                    self.font.setItalic(True)
        #'Bold''Regular''Slanted''Italic''Medium''Extra''Light''Condensed''Black''It''Semibold'#+
        
        self.font.setFamily(self.tableau[self.index][5])
        self.font.setPointSize(self.FontTextSize)
        ####
        self.fonteComp   = self.tableau[self.index][1]
        setFontByDefault = self.tableau[self.index][2]
#        FreeCAD.Console.PrintMessage(str(self.index) + " , " + self.tableau[self.index][1] + " , " + self.tableau[self.index][2] + " , ' " + famille + "' , ' " + typeCar + " ' \n")
    #### matplotlib fin 5/5 #################################################################

    def on_lineEdit_NameFile(self):

        self.pathFont = self.lineEdit_NameFile.text() 
        #print(self.pathFont)
        try:
            self.pathFont  = self.pathFont.split(")") [1]
        except Exception:
            self.pathFont  = self.pathFont
        #print(self.pathFont)

        ui.searchFont(self.pathFont)
        QtCore.QObject.connect(self.comboBoxPy, QtCore.SIGNAL("currentIndexChanged(int)"), self.on_fontComboBoxPython)

    def on_textEdit_Changed(self):        #connection textEdit
        global ui

#        self.textEdit.setTextColor(QColor("red"))
#        self.textEdit.setTextColor(QColor("Base"))
        ui.on_CB_Word()

    def on_PB_Reverse(self):        #connection Reverse
        global texte

        texte = self.textEdit.toPlainText()
        texte = texte[::-1]
        self.textEdit.setText(_fromUtf8(texte))

    def on_CB_Word(self):
        global texte

        texte = ""
        texte = self.textEdit.toPlainText()

        try:
            selectedEdge = FreeCADGui.Selection.getSelectionEx()[0].SubObjects[0]
        except Exception:
            selectedEdge = ""

        if self.CB_Word.isChecked():
            texte = texte.split(" ")
            mot = "word"
        else:
            mot = "characters"

        if (texte.count(" ") == 1) or (texte.count(" ") == 0):
            espace = "space"
        else:
            espace = "spaces"

        if str(selectedEdge) != "":
            self.groupBox_01.setTitle("Text to be displayed  ( "+str(len(texte))+ " " + mot + " ) ( " + str(texte.count(" ")) + " " + espace + " ) ( Lenght " + str(round(selectedEdge.Length,3)) + " mm )")
        else:
            self.groupBox_01.setTitle("Text to be displayed  ( "+str(len(texte))+ " " + mot + " ) ( " + str(texte.count(" ")) + " " + espace + " )")

    def on_CH_Pivot_Character(self):        #connection checkBox
        global PivotCharachter

        if self.CH_Pivot_Character.isChecked():
            self.DS_Pivot_Char.setEnabled(True)
        else:
            PivotCharachter = 0.0
            self.DS_Pivot_Char.setEnabled(False)
            self.DS_Pivot_Char.setValue(PivotCharachter)
#        App.Console.PrintMessage("PivotCharachter check" + "\n")

    def on_DS_Pivot_Char(self, value):      #connection doubleSpinBox
        global PivotCharachter

        PivotCharachter = value
        App.Console.PrintMessage("PivotCharachter " + str(PivotCharachter)+"\n")

    def on_PU_Reset_Placement(self):           # Reset_Placement
        global PlacementX
        global PlacementY
        global PlacementZ
        global coor_X
        global coor_Y
        global coor_Z

        coor_X = coor_Y = coor_Z = 0.0
        PlacementX = PlacementY = PlacementZ = 0.0
        self.CH_Sp_Placement.setChecked(False)
        self.DS_PlacementX.setValue(PlacementX)
        self.DS_PlacementX.setEnabled(False)
        self.DS_PlacementY.setValue(PlacementY)
        self.DS_PlacementY.setEnabled(False)
        self.DS_PlacementZ.setValue(PlacementZ)
        self.DS_PlacementZ.setEnabled(False)
#        App.Console.PrintMessage(str("on_PU_Reset_Placement ")+"\n")
        
    def on_PU_Reset_Inclination(self):           # Reset_Inclination
        global inclinaisonX
        global inclinaisonY
        global inclinaisonZ

        inclinaisonX = inclinaisonY = inclinaisonZ = 0.0
        self.CH_Sp_Inclination.setChecked(False)
        self.DS_InclinaisonX.setValue(inclinaisonX)
        self.DS_InclinaisonX.setEnabled(False)
        self.DS_InclinaisonY.setValue(inclinaisonY)
        self.DS_InclinaisonY.setEnabled(False)
        self.DS_InclinaisonZ.setValue(inclinaisonZ)
        self.DS_InclinaisonZ.setEnabled(False)
#        App.Console.PrintMessage(str("on_PU_Reset_Inclination ")+"\n")

    def on_RA_Choice_Outdoor(self):           #
        global ui
        global exterieur
        global epaisseur

        self.groupBox_05.setVisible(False)    #clock
        self.groupBox_055.setVisible(True)    #Path

        self.groupBox_04.setVisible(False)
        self.groupBox_05.setVisible(False)
        epaisseur = 0.0
        self.DS_Extrude.setValue(epaisseur)
        self.CH_Extrude.setChecked(False)
        self.DS_Extrude.setEnabled(False)
        exterieur = 1
        self.S_Begin_Angle.setEnabled(True)
        self.S_End_Angle.setEnabled(True)
        self.DS_Correction_Radius.setEnabled(True)
        self.DS_Correction_Angle.setEnabled(True)
        self.PU_Flat.setEnabled(True)
        self.groupBox_04.setEnabled(False)
        self.groupBox_05.setEnabled(False)
        ui.on_PU_Reset_Placement()
        ui.on_PU_Reset_Inclination()
#        App.Console.PrintMessage(str("on_RA_Choice_Outdoor ")+" "+str(exterieur)+"\n")

    def on_RA_Choice_Indoor(self):          #
        global ui
        global exterieur
        global epaisseur

        self.groupBox_04.setVisible(False)
        self.groupBox_05.setVisible(False)
        epaisseur = 0.0
        self.DS_Extrude.setValue(epaisseur)
        self.CH_Extrude.setChecked(False)
        self.DS_Extrude.setEnabled(False)
        exterieur = 0
        self.S_Begin_Angle.setEnabled(True)
        self.S_End_Angle.setEnabled(True)
        self.DS_Correction_Radius.setEnabled(True)
        self.DS_Correction_Angle.setEnabled(True)
        self.PU_Flat.setEnabled(True)
        self.groupBox_04.setEnabled(False)
        self.groupBox_05.setEnabled(False)
        self.groupBox_055.setVisible(True)    #Path

        ui.on_PU_Reset_Placement()
        ui.on_PU_Reset_Inclination()
#        App.Console.PrintMessage(str("on_RA_Choice_Indoor ")+" "+str(exterieur)+"\n")

    def on_RA_Choice_Helix(self):              #
        global ui
        global exterieur
        global cercleClock
        global nombreFaces
        global debout
        global epaisseur

        self.groupBox_04.setVisible(True)
        self.groupBox_05.setVisible(False)
        epaisseur = 0.0
        self.DS_Extrude.setValue(epaisseur)
        self.CH_Extrude.setChecked(False)
        self.DS_Extrude.setEnabled(False)
        exterieur = 2
        cercleClock = 0
        nombreFaces = 0
        debout = 1

        self.RA_Choice_Outdoor.setText(_fromUtf8("Outdoor"))
        self.RA_Choice_Indoor.setText(_fromUtf8("Indoor"))
        self.PU_Flat.setText(_fromUtf8("Mode Stand"))

        self.S_Begin_Angle.setEnabled(True)
        self.S_End_Angle.setEnabled(True)
        self.DS_Correction_Radius.setEnabled(True)
        self.DS_Correction_Angle.setEnabled(True)
        self.PU_Flat.setEnabled(False)##
        self.groupBox_04.setEnabled(True)
        self.groupBox_05.setEnabled(False)
        self.groupBox_055.setVisible(False)    #Path


        ui.on_PU_Reset_Placement()
        ui.on_PU_Reset_Inclination()

    def on_RA_Choice_Clock(self):
        global ui
        global exterieur
        global debout
        global correctionRayon
        global correctionAngle
        global epaisseur
        global PivotCharachter

        self.groupBox_04.setVisible(False)
        self.groupBox_05.setVisible(True)
        epaisseur = 0.0
        self.DS_Extrude.setValue(epaisseur)
        self.CH_Extrude.setChecked(False)
        self.DS_Extrude.setEnabled(False)
        exterieur = 3
        debout = 0
        self.PU_Flat.setEnabled(False)
        self.S_Begin_Angle.setEnabled(False)
        self.S_End_Angle.setEnabled(False)
#        correctionRayon = 0
        self.DS_Correction_Radius.setEnabled(False)
        self.DS_Correction_Radius.setValue(0.0)
#        correctionAngle = 10.0
        self.DS_Correction_Angle.setEnabled(False)
        self.DS_Correction_Angle.setValue(0.0)
        PivotCharachter = 0.0
        self.DS_Pivot_Char.setEnabled(False)
        self.DS_Pivot_Char.setValue(PivotCharachter)
        self.CH_Pivot_Character.setChecked(False)
        self.groupBox_04.setEnabled(False)
        self.groupBox_05.setEnabled(True)
        self.groupBox_055.setVisible(False)    #path
        ui.on_PU_Reset_Placement()
        ui.on_PU_Reset_Inclination()
#        App.Console.PrintMessage(str("on_RA_Choice_Clock ")+str(exterieur)+"\n")

    def on_PU_Flat(self):         # Flat or Stand
        global debout

        if debout == 1:
            debout = 0
            self.RA_Choice_Outdoor.setText(_fromUtf8("Indoor"))
            self.RA_Choice_Indoor.setText(_fromUtf8("Outdoor"))
            self.PU_Flat.setText(_fromUtf8("Mode Flat"))
            self.PU_Flat.setToolTip(_fromUtf8("Click for create the text Stand"))
            self.PU_Flat.setIcon(QtGui.QIcon(QtGui.QPixmap(flatIcon))) # icone dans une variable 
        else:
            debout = 1
            self.RA_Choice_Outdoor.setText(_fromUtf8("Outdoor"))
            self.RA_Choice_Indoor.setText(_fromUtf8("Indoor"))
            self.PU_Flat.setText(_fromUtf8("Mode Stand"))
            self.PU_Flat.setToolTip(_fromUtf8("Click for create the text Flat"))
            self.PU_Flat.setIcon(QtGui.QIcon(QtGui.QPixmap(standIcon))) # icone dans une variable 
#        App.Console.PrintMessage(str("on_PU_Flat ")+str(debout)+"\n")

    def on_DS_Radius_Circle(self,value):
        global rayon
        global cercleClock

        rayon = value  
        cercleClock = rayon
#        App.Console.PrintMessage("on_DS_Radius_Circle Radius"+str(rayon)+"\n")

    def on_DS_Size_Character(self,value):
        global SizeCaractere

        SizeCaractere = value
#        App.Console.PrintMessage("on_DS_Size_Character Size"+str(SizeCaractere)+"\n")

    def on_S_Begin_Angle(self,value):          #
        global debut

        debut = value
#        App.Console.PrintMessage(str("on_S_Begin_Angle ")+str(debut)+"\n")

    def on_S_End_Angle(self,value):            #
        global rotation

        rotation = value
#        App.Console.PrintMessage(str("on_S_End_Angle ")+str(rotation)+"\n")

    def on_DS_PlacementX(self,value):          #
        global PlacementX

        PlacementX = value
#        App.Console.PrintMessage(str("on_DS_PlacementX ")+str(PlacementX)+"\n")

    def on_DS_PlacementY(self,value):          #
        global PlacementY

        PlacementY = value
#        App.Console.PrintMessage(str("on_DS_PlacementY ")+str(PlacementY)+"\n")

    def on_DS_PlacementZ(self,value):          #
        global PlacementZ

        PlacementZ = value
#        App.Console.PrintMessage(str("on_DS_PlacementZ ")+str(PlacementZ)+"\n")

    def on_CH_Sp_Placement(self):              # Placement or not Placement
        global ui

        if self.CH_Sp_Placement.isChecked(): 
            self.DS_PlacementX.setEnabled(True)
            self.DS_PlacementY.setEnabled(True)
            self.DS_PlacementZ.setEnabled(True)
#            App.Console.PrintMessage(str("on_CH_Sp_Placement ")+str("True")+"\n")
        else:
            ui.on_PU_Reset_Placement()
        if self.RA_Choice_Clock.isChecked():
            self.DS_PlacementX.setEnabled(False)
            self.DS_PlacementY.setEnabled(False)
#            App.Console.PrintMessage(str("on_CH_Sp_Placement ")+str("False")+"\n")

    def on_DS_Correction_Angle(self,value):    # 
        global correctionAngle

        correctionAngle = value
#        App.Console.PrintMessage(str("on_DS_Correction_Angle ")+str(correctionAngle)+"\n")

    def on_DS_Correction_Radius(self,value):   # 
        global correctionRayon

        correctionRayon = value
#        App.Console.PrintMessage(str("on_DS_Correction_Radius ")+str(correctionRayon)+"\n")

    def on_DS_Extrude(self,value):             # 
        global epaisseur
        global epaisSupp

        epaisseur = value
        if epaisseur > epaisSupp:
            self.DS_Extrude_Support.setStyleSheet("background-color: QPalette.Base") # origin system
            self.DS_Extrude.setStyleSheet("background-color: QPalette.Base") # origin system
            self.CH_Extrude.setStyleSheet("background-color: QPalette.Base") # origin system
        else:
            if epaisSupp >= epaisseur:
                self.DS_Extrude.setStyleSheet("background-color: rgb(224, 0, 0)")
                self.DS_Extrude_Support.setStyleSheet("background-color: rgb(224, 0, 0)")
#        App.Console.PrintMessage("on_DS_Extrude "+str(epaisseur)+"\n")

    def on_CH_Extrude(self):                   #
        global epaisseur
        global epaisSupp

        if self.CH_Extrude.isChecked(): 
            self.DS_Extrude.setEnabled(True)
            epaisseur = 1.0
        else:
            self.DS_Extrude.setEnabled(False)
            epaisseur = 0.0
        if (epaisSupp != 0) and (epaisSupp >= epaisseur):
            self.DS_Extrude.setStyleSheet("background-color: rgb(255, 165, 0)")
            self.DS_Extrude_Support.setStyleSheet("background-color: rgb(255, 165, 0)")
            self.CH_Extrude.setStyleSheet("background-color: rgb(255, 165, 0)")
        else:
            self.DS_Extrude.setStyleSheet("background-color: QPalette.Base") # origin system
            self.CH_Extrude.setStyleSheet("background-color: QPalette.Base") # origin system
        self.DS_Extrude.setValue(epaisseur)
#        App.Console.PrintMessage(str("on_CH_Extrude ")+" "+str(epaisseur)+"\n")

    def on_DS_InclinaisonX(self,value):        # 
        global inclinaisonX

        inclinaisonX = value
#        App.Console.PrintMessage(str("on_DS_InclinaisonX ")+str(inclinaisonX)+"\n")

    def on_DS_InclinaisonY(self,value):        # 
        global inclinaisonY

        inclinaisonY = value
#        App.Console.PrintMessage(str("on_DS_InclinaisonY ")+str(inclinaisonY)+"\n")

    def on_DS_InclinaisonZ(self,value):        # 
        global inclinaisonZ

        inclinaisonZ = value
#        App.Console.PrintMessage(str("on_DS_InclinaisonZ ")+str(inclinaisonZ)+"\n")

    def on_CH_Sp_Inclination(self):            #
        global ui

        if self.CH_Sp_Inclination.isChecked(): 
            self.DS_InclinaisonX.setEnabled(True)
            self.DS_InclinaisonY.setEnabled(True)
            self.DS_InclinaisonZ.setEnabled(True)
        else:
            ui.on_PU_Reset_Inclination()
#        App.Console.PrintMessage(str("on_CH_Sp_Inclination ")+str(self.CH_Sp_Inclination.isChecked())+"\n")

    def on_DS_Step_Of_The_Helix(self,value):   # 
        global pasHelix
        global baseHelix
        global endHelix

        pasHelix = value
        if pasHelix == 0:
            baseHelix = endHelix = 0.0
            self.DS_Base_Helix.setValue(baseHelix)
            self.DS_Base_Helix.setEnabled(True)
            self.DS_End_Helix.setValue(endHelix)
            self.DS_End_Helix.setEnabled(True)
        else:
            baseHelix = endHelix = 0.0
            self.DS_Base_Helix.setValue(baseHelix)
            self.DS_Base_Helix.setEnabled(False)
            self.DS_End_Helix.setValue(endHelix)
            self.DS_End_Helix.setEnabled(False)
#        App.Console.PrintMessage(str("on_DS_Step_Of_The_Helix ")+str(SizeCaractere)+"\n")

    def on_DS_Number_Char_Per_Turn(self,value):# 
        global nombreCarParTour

        nombreCarParTour = value
#        App.Console.PrintMessage(str("on_DS_Number_Char_Per_Turn ")+str(nombreCarParTour)+"\n")

    def on_DS_Base_Helix(self,value):          # 
        global baseHelix

        baseHelix = value
#        App.Console.PrintMessage(str("on_DS_Base_Helix ")+str(baseHelix)+"\n")

    def on_DS_End_Helix(self,value):           # 
        global endHelix

        endHelix = value
#        App.Console.PrintMessage(str("on_DS_End_Helix ")+str(endHelix)+"\n")

    def on_DS_Radius_Support(self,value):      #  Clock
        global cercleClock

        cercleClock = value
#        App.Console.PrintMessage(str("on_DS_Radius_Support ")+str(cercleClock)+"\n")

    def on_S_Number_Faces_Support(self,value): # number Faces of support 0=none 1=circle 2=rectangle 3=triangle 4,5 ... polygon
        global nombreFaces                     #  Clock

        nombreFaces = value
        self.DS_Extrude_Support.setEnabled(True)
        if nombreFaces == 0:
            self.label_5.setText(_fromUtf8("Support number face"))
            self.DS_Extrude_Support.setEnabled(False)
        elif nombreFaces == 1:
            self.label_5.setText(_fromUtf8("Support Circle"))
        elif nombreFaces == 2:
            self.label_5.setText(_fromUtf8("Support Rectangle"))
        elif nombreFaces == 3:
            self.label_5.setText(_fromUtf8("Support Triangle"))
        elif nombreFaces == 4:
            self.label_5.setText(_fromUtf8("Support Square"))
        else :
            self.label_5.setText(_fromUtf8("Support Polygone"))
#        App.Console.PrintMessage(str("on_S_Number_Faces_Support ")+str(nombreFaces)+"\n")

    def on_DS_Extrude_Support(self,value):     #  Clock
        global epaisSupp
        global epaisseur

        epaisSupp = value
        if epaisSupp >= epaisseur:
            if self.CH_Extrude.isChecked():
                self.DS_Extrude.setStyleSheet("background-color: rgb(224, 0, 0)")
                self.DS_Extrude_Support.setStyleSheet("background-color: rgb(224, 0, 0)")
                self.CH_Extrude.setStyleSheet("background-color: QPalette.Base") # origin system
            else:
                self.DS_Extrude.setStyleSheet("background-color: rgb(255, 165, 0)")
                self.DS_Extrude_Support.setStyleSheet("background-color: rgb(255, 165, 0)")
                self.CH_Extrude.setStyleSheet("background-color: rgb(255, 165, 0)")
        else:
            self.DS_Extrude.setStyleSheet("background-color: QPalette.Base") # origin system
            self.DS_Extrude_Support.setStyleSheet("background-color: QPalette.Base") # origin system
            self.CH_Extrude.setStyleSheet("background-color: QPalette.Base") # origin system
        if epaisSupp == 0:
            self.DS_Extrude.setStyleSheet("background-color: QPalette.Base") # origin system
            self.DS_Extrude_Support.setStyleSheet("background-color: QPalette.Base") # origin system
            self.CH_Extrude.setStyleSheet("background-color: QPalette.Base") # origin system

        self.DS_PlacementZ.setEnabled(True)
#        App.Console.PrintMessage(str("on_DS_Extrude_Support ")+str(epaisSupp)+"\n")

    def on_PU_Roman(self):                     # Roman or Arabic Clock
        global romain

        if romain == 1:
            romain = 0
            self.PU_Roman.setText(_fromUtf8("Mode Arabic"))
            self.PU_Roman.setToolTip(_fromUtf8("Click for activate the mode Roman"))
            self.PU_Roman.setIcon(QtGui.QIcon(QtGui.QPixmap(arabicIcon))) # icone dans une variable 
        else:
            romain = 1
            self.PU_Roman.setText(_fromUtf8("Mode Roman"))
            self.PU_Roman.setToolTip(_fromUtf8("Click for activate the mode Arabic"))
            self.PU_Roman.setIcon(QtGui.QIcon(QtGui.QPixmap(romanIcon))) # icone dans une variable 
#        App.Console.PrintMessage(str("romain ")+str(romain)+"\n")

    def on_PU_Redress(self):                   # Redress or circumferencial Clock
        global redressement

        if redressement == 1:
            redressement = 0
            self.PU_Redress.setText(_fromUtf8("Axial"))
            self.PU_Redress.setIcon(QtGui.QIcon(QtGui.QPixmap(axialIcon))) # icone dans une variable 
            self.PU_Redress.setToolTip(_fromUtf8("Click for activate the mode Redress"))
        else:
            redressement = 1
            self.PU_Redress.setText(_fromUtf8("Redress"))
            self.PU_Redress.setIcon(QtGui.QIcon(QtGui.QPixmap(redressIcon))) # icone dans une variable 
            self.PU_Redress.setToolTip(_fromUtf8("Click for activate the mode Axial"))
#        App.Console.PrintMessage(str("redressement ")+str(redressement)+"\n")

    def on_PU_Reset(self):                     #
        global ui
        global points
        global coor_X
        global coor_Y
        global coor_Z
        global vec

        global PolicePath

        global rayon
        global texte
        global debut
        global rotation
        global SizeCaractere

        global precision
        global correctionAngle
        global correctionRayon
        global debout
        global exterieur
        global baseHelix
        global endHelix
        global pasHelix
        global nombreCarParTour
        global PivotCharachter

        global PlacementX
        global PlacementY
        global PlacementZ

        global inclinaisonX
        global inclinaisonY
        global inclinaisonZ

        global cercleClock
        global nombreFaces
        global romain
        global redressement

        global comP
        global nameL
        global epaisseur
        global epaisSupp
        global compount1

        texte = ""
        self.CB_Word.setChecked(False)

        exterieur = 1
        self.RA_Choice_Outdoor.setText(_fromUtf8("Outdoor"))
        self.RA_Choice_Indoor.setText(_fromUtf8("Indoor"))
        self.RA_Choice_Outdoor.setChecked(True)

        debout = 1
        self.PU_Flat.setText(_fromUtf8("Mode Stand"))
        self.PU_Flat.setToolTip(_fromUtf8("Click for create the text Flat"))
        self.PU_Flat.setIcon(QtGui.QIcon(QtGui.QPixmap(standIcon))) # icone dans une variable 

        SizeCaractere = 2.0
        self.DS_Size_Character.setValue(SizeCaractere)
        rayon = 10.0
        self.DS_Radius_Circle.setValue(rayon)

        debut = 0
        self.S_Begin_Angle.setValue(debut)
        self.S_Begin_Angle.setEnabled(True)
        rotation = 360
        self.S_End_Angle.setValue(rotation)
        self.S_End_Angle.setEnabled(True)

        correctionAngle = 10.0
        self.DS_Correction_Angle.setValue(correctionAngle)
        self.DS_Correction_Radius.setEnabled(True)
        correctionRayon = 0.15
        self.DS_Correction_Radius.setValue(correctionRayon)
        self.DS_Correction_Angle.setEnabled(True)

        PivotCharachter = 0.0
        self.DS_Pivot_Char.setEnabled(False)
        self.DS_Pivot_Char.setValue(PivotCharachter)
        self.CH_Pivot_Character.setChecked(False)

        epaisseur = 0.0
        self.DS_Extrude.setValue(epaisseur)
        self.DS_Extrude.setEnabled(False)
        self.DS_Extrude.setStyleSheet("background-color: QPalette.Base") # origin system
        self.CH_Extrude.setChecked(False)
        self.CH_Extrude.setStyleSheet("background-color: QPalette.Base") # origin system

        ui.on_PU_Reset_Placement()
        ui.on_PU_Reset_Inclination()

        self.groupBox_04.setEnabled(False)
        baseHelix = 0.0
        self.DS_Base_Helix.setValue(baseHelix)
        self.DS_Base_Helix.setEnabled(False)
        endHelix = 0.0
        self.DS_End_Helix.setValue(endHelix)
        self.DS_Base_Helix.setEnabled(False)
        pasHelix = 2.0
        self.DS_Step_Of_The_Helix.setValue(pasHelix)
        nombreCarParTour = 10
        self.DS_Number_Char_Per_Turn.setValue(nombreCarParTour)

        self.groupBox_05.setEnabled(False)
        cercleClock = rayon
        self.DS_Radius_Support.setValue(cercleClock)
        nombreFaces = 0
        self.S_Number_Faces_Support.setValue(nombreFaces)
        self.label_5.setText(_fromUtf8("Support number face"))
        epaisSupp   = 0.0
        self.DS_Extrude_Support.setEnabled(False)
        self.DS_Extrude_Support.setValue(epaisSupp)
        self.DS_Extrude_Support.setStyleSheet("background-color: QPalette.Base") # origin system

        romain = 0
        self.PU_Roman.setText(_fromUtf8("Mode Arabic"))
        self.PU_Roman.setIcon(QtGui.QIcon(QtGui.QPixmap(arabicIcon))) # icone dans une variable 
        self.PU_Roman.setToolTip(_fromUtf8("Click for activate the mode Roman"))

        redressement = 0
        self.PU_Redress.setText(_fromUtf8("Axial"))
        self.PU_Redress.setIcon(QtGui.QIcon(QtGui.QPixmap(axialIcon))) # icone dans une variable 
        self.PU_Redress.setToolTip(_fromUtf8("Click for activate the mode Redress"))

        compount1 = 0

        texte = self.textEdit.toPlainText()
        self.groupBox_01.setTitle("Text to be displayed  ( "+str(len(texte))+" characters )")
#        App.Console.PrintMessage(str("on_PU_Reset ")+str()+"\n")

    def on_PU_Benchmarks(self):                # Benchmarks
      try:
        global compount1
        global ui

        compount1 = 1
        ui.on_PU_Execute()
      except:
        sayexc("Error")
#        App.Console.PrintMessage(str("Benchmarks")+"\n")
       
    def on_PU_Execute(self):         # Execute
        global ui
        global PolicePath
        global switchResetFALSE

        global points
        global coor_X
        global coor_Y
        global coor_Z
        
        global PlacementX
        global PlacementY
        global PlacementZ

        global inclinaisonX
        global inclinaisonY
        global inclinaisonZ

        global vec
        global rayon
        global texte
        global debut
        global rotation
        global SizeCaractere
        global PivotCharachter

        global ii
        global precision
        global correctionAngle
        global correctionRayon
        global debout
        global exterieur
        global baseHelix
        global endHelix
        global pasHelix
        global nombreCarParTour

        global cercleClock
        global nombreFaces
        global romain
        global redressement

        global comP
        global nameL

        global epaisseur
        global epaisSupp
        global compount1

        points   = []
        comP     = []
        nameL    = []

        del   points[:]
        del     comP[:]
        del    nameL[:]

        doc = FreeCAD.ActiveDocument
        if doc == None:
            doc = FreeCAD.newDocument()

#        texte = self.textEdit.toPlainText()
#
#            if (self.CB_Word.isChecked()):
#                texte = texte.split(" ")
#
        self.groupBox_01.setTitle("Text to be displayed  ( "+str(len(texte))+" characters )")

#### Path

        # create text on wire, arc, circle edge... 
        #
        try:
            ssel = FreeCADGui.Selection.getSelectionEx()
            selectedEdge = lineSelected = FreeCADGui.Selection.getSelectionEx()[0].SubObjects[0]  # select one element
        except Exception:
            selectedEdge = None
            None
        passNoOk = 0
        if (hasattr(selectedEdge,'Surface')) or (hasattr(selectedEdge,'Point')):
            passNoOk = 1

        if (len(ssel) != 0) and (passNoOk == 0):
            
            if self.CB_Word.isChecked():
                textLabel = texte[0]
            else:
                textLabel = texte[0:10]
            FcString = doc.addObject("App::DocumentObjectGroup","FcStringP_" + textLabel)
            if self.CB_01_Points.isChecked():
                FcStringPoints = doc.addObject("App::DocumentObjectGroup","FcStringPoints_" + textLabel)

            try:
                numberOfPoints = len(texte)                                                        # Decomposition number (or precision you can change)
                points = selectedEdge.discretize(numberOfPoints)                                   # discretize the element
                pasTab = 0
                
                for position in range(len(texte)):                                                             # list and display the coordinates
    
                    ss=Draft.makeShapeString(String=texte[position],FontFile=PolicePath,Size=SizeCaractere,Tracking=0)
    
                    XLongueur = ss.Shape.BoundBox.XLength                                          # Length x boundBox rectangle
                    YLongueur = ss.Shape.BoundBox.YLength                                          # Length y boundBox rectangle
                    ZLongueur = ss.Shape.BoundBox.ZLength                                          # Length z boundBox rectangle
                    XXLongueur = 0.0
                    YYLongueur = 0.0
                    ZZLongueur = 0.0
                
                    if self.RB_Position_01.isChecked():
                        None
                    elif self.RB_Position_02.isChecked():
                        XXLongueur = -XLongueur/2.0; YYLongueur = -YLongueur/2.0; #ZZLongueur = -ZLongueur/2.0
                    elif self.RB_Position_03.isChecked():
                        XXLongueur = 0; YYLongueur = -YLongueur; #ZZLongueur = -ZLongueur
                
                    pl = FreeCAD.Placement()                                                # placement object
                
                    if self.RB_Path_01.isChecked():
    #                    pl.Base=FreeCAD.Vector(points[position][0] - (XXLongueur), points[position][1] - (YYLongueur), points[position][2])
                        pl.Base=FreeCAD.Vector(points[position][0] + (XXLongueur), points[position][1] + (YYLongueur), points[position][2])
                        pl.Rotation = App.Rotation(inclinaisonX, inclinaisonY, inclinaisonZ)
                        pl = pl.multiply(App.Placement(App.Vector(PlacementX, PlacementY, PlacementZ), App.Rotation(0, 0, 0), App.Vector(0,0,0)))
                    else:
                        ##Extract macro_Perpendicular_To_Wire
                        if pasTab == 0:
                            pointsDirection = []
                            pointsDirection = lineSelected.discretize(Number = ((len(texte)-1) * 10))                   # discretize the path line first selection
                            pasTab = 1
                        try:
                            v=pointsDirection[position*10].sub(pointsDirection[(position*10) + 1])                            # avec vecteurs 1 et 2 (direction debut ligne)
                        except Exception:
                            v=pointsDirection[-2].sub(pointsDirection[-1])                            # avec vecteurs 1 et 2 (direction debut ligne)
                            
                        r=App.Rotation(App.Vector(1,0,0),v)
                        pl.Rotation.Q = r.Q
                        pl = pl.multiply(App.Placement(App.Vector(0,0,0), App.Rotation(inclinaisonX, inclinaisonY, inclinaisonZ), App.Vector(0,0,0)))
                
                        try:
                            pl.Base = pointsDirection[position*10]
                        except Exception:
                            pl.Base = pointsDirection[-1]
                        pl = pl.multiply(App.Placement(App.Vector(XXLongueur + PlacementX, YYLongueur + PlacementY, ZZLongueur + PlacementZ), App.Rotation(correctionAngle, 0, 0), App.Vector(0,0,0)))
    
                    ####
                    if self.CB_03_BBox.isChecked():
                        ss.ViewObject.BoundingBox = True
                    ####
                    ss.Label = texte[position]
                    Draft.autogroup(ss)
    #                ss.Label = texte[position]
                    FcString.addObject(ss)  # contener character
    #                FcString = doc.addObject("App::DocumentObjectGroup","FcString")
    
                    ####
                    if epaisseur > 0:         # extrusion characrters
                        CharExtrude = Draft.extrude(ss,Base.Vector(0,0,epaisseur))
                        CharExtrude.Placement=pl 
                        CharExtrude.Label = texte[position]
                        App.ActiveDocument.getObject(CharExtrude.Name).recompute()
                        try:
                            CharExtrude.ViewObject.DisplayMode = u"Flat Lines"
                        except Exception:
                            None
                        ####
                        if self.CB_03_BBox.isChecked():
                            CharExtrude.ViewObject.BoundingBox = True
                        ####
                        comP.append(CharExtrude.Shape)
    #                        nameL.append(CharExtrude.Name)
                        FcString.addObject(CharExtrude)  # contener extrude
                    else:                 # 
                        ss.Placement = pl
                        ss.Support=None
                        try:
                            ss.ViewObject.DisplayMode = u"Flat Lines"
                        except Exception:
                            None
                        comP.append(ss.Shape)
    #                        nameL.append(ss.Name)
                    ####
                    if self.CB_01_Points.isChecked():
                        pointRepere = Draft.makePoint(pl.Base)
                        pointRepere.ViewObject.PointColor = (1.0,0.,0.0)
                        pointRepere.Label = texte[position]
                        App.ActiveDocument.getObject(pointRepere.Name).recompute()
                        FcStringPoints.addObject(pointRepere)
                    ####
                    if self.CB_04_Progression.isChecked():
                        FreeCADGui.updateGui()                                 # rafraichi l'ecran
                    ####
            except Exception:
                App.Console.PrintError(str("Discretize Error or selection error")+"\n")

#### Path fin

        else:
            if ((exterieur == 0) and (debout == 0)):
                vecligne=[FreeCAD.Vector(PlacementX,PlacementY,PlacementZ),FreeCAD.Vector(rayon + correctionRayon,0.0,0.0)]      # 
            else:
                if exterieur == 3:
                    vecligne=[FreeCAD.Vector(PlacementX,PlacementY,PlacementZ),FreeCAD.Vector(rayon - (SizeCaractere/2),0.0,0.0)]      # 
                elif debout == 0:
                    vecligne=[FreeCAD.Vector(PlacementX,PlacementY,PlacementZ),FreeCAD.Vector(rayon + correctionRayon - SizeCaractere,0.0,0.0)]      # 
                else:
                    vecligne=[FreeCAD.Vector(PlacementX,PlacementY,PlacementZ),FreeCAD.Vector(rayon + correctionRayon,0.0,0.0)]      # 
    
            ligne = Draft.makeWire(vecligne,closed=False,face=False,support=None)     # creation de la ligne de base
            lineName = ligne.Name
    

#            if (self.CB_Word.isChecked()):
#                texte = texte.split(" ")

            ii  = -1
            ii2 = -1
    
            nombre = len(texte) - 1    # moins 1 pour aller de 0 degres a 0 degres dans la boucle pour compatible avec Path
            #nombre = len(texte)        # si pas - 1 ex: pour 36 lettres va de 0 degres a 350 degres

            coor_Z = PlacementZ
               
            if (exterieur == 0) or (debout == 0):
                texte = texte[::-1]
                if (exterieur == 0) and (debout == 0):
                    texte = texte[::-1]
    
            if exterieur == 2:        # helix
                if nombreCarParTour == 0:
                    nombreCarParTour = 1
                    App.Console.PrintError("Insufficient number"+"\n")
                pas = 0.0
                nombre = nombreCarParTour
                if pasHelix != 0:
                    pas = pasHelix / (nombreCarParTour)
                else:
                    pas = ((((endHelix - SizeCaractere)-baseHelix)/(len(texte) / nombreCarParTour))/(nombreCarParTour)) # pas of helix
                    coor_Z += baseHelix
            else:
                nombreCarParTour = 1
    
            if exterieur == 3:         # Clock
                FcString = doc.addObject("App::DocumentObjectGroup","FcClock")
                if self.CB_01_Points.isChecked():
                    FcStringPoints = doc.addObject("App::DocumentObjectGroup","FcStringPoints_Clock")
                nombre = 12
                if romain == 0:
                    texte = ["1","2","3","4","5","6","7","8","9","10","11","12"]
                else:
                    texte = ["I","II","III","IIII","V","VI","VII","VIII","IX","X","XI","XII"]
                texte = texte[::-1]
            else:
                if self.CB_Word.isChecked():
                    textLabel = texte[0]
                else:
                    textLabel = texte[0:10]
                FcString = doc.addObject("App::DocumentObjectGroup","FcString_" + textLabel)
                if self.CB_01_Points.isChecked():
                    FcStringPoints = doc.addObject("App::DocumentObjectGroup","FcStringPoints_" + textLabel)

            ####Boucle principale############################################################################
            boucler = int(len(texte) / nombreCarParTour)
    
    #        if (len(texte) % nombreCarParTour) != 0: # calcul number spires Helix
    #            boucler += 1
    
            for hel in range(boucler):
                ii = -1
                ####Boucle de travail#################################################
                #for angleTr in range(debut,rotation,((rotation-debut)/nombre)): # old
                for angleTrFloat in range((debut*10000),(rotation*10000),int((round(((float(rotation)-float(debut))/float(nombre)),4)*10000)) ):    # pour 4 decimales
                    angleTr = (float(angleTrFloat)/10000)
                    ii  += 1
                    ii2 += 1
                    ligne.Placement = App.Placement(App.Vector(PlacementX,PlacementY,PlacementZ), App.Rotation(App.Vector(0,0,1),angleTr), App.Vector(0,0,0))
    
                    a = ligne.End # fin de ligne
                    coor_X = (a[0])
                    coor_Y = (a[1])
    
                    if (ii < nombre) and (ii2 < len(texte)):
                        if exterieur == 3:                  # clock
                            ligne.Placement = App.Placement(App.Vector(PlacementX,PlacementY,PlacementZ), App.Rotation(App.Vector(0,0,1),angleTr+90), App.Vector(0,0,0))
    
                            try:
                                a = ligne.Shape.Edges[0].Vertexes[1]                       # fin de ligne
                            except Exception:
                                a = ligne.End                                              # 0.19 fin de ligne
    
                            try:
                                coor_X = (a.Point.x)
                                coor_Y = (a.Point.y)
                            except Exception:
                                coor_X = (a.x)                                             # 0.19 fin de ligne
                                coor_Y = (a.y)
    
                        ss=Draft.makeShapeString(String=texte[ii2],FontFile=PolicePath,Size=SizeCaractere,Tracking=0)
    
                        ss.Label = texte[ii2]
                        FcString.addObject(ss)  # contener character
    
                        centreX = (ss.Shape.BoundBox.Center[0])
                        centreY = (ss.Shape.BoundBox.Center[1])
                        centreZ = (ss.Shape.BoundBox.Center[2])
                        lengthX = (ss.Shape.BoundBox.XLength)
                        lengthY = (ss.Shape.BoundBox.YLength)
                        lengthZ = (ss.Shape.BoundBox.ZLength)
    
                        plm=""
                        plm=FreeCAD.Placement()
                        plm.Base=FreeCAD.Vector(coor_X,coor_Y,coor_Z)
    
                        if debout == 1:           # debout
                            if exterieur == 0:    # circumferential internal
                                plm = App.Placement(App.Vector(coor_X,coor_Y,coor_Z), App.Rotation(angleTr-90-correctionAngle+inclinaisonX,inclinaisonY+PivotCharachter,90+inclinaisonZ), App.Vector(0,0,0)) # pitch,roll...1
                            elif exterieur == 1:  # circumferential external
                                plm = App.Placement(App.Vector(coor_X,coor_Y,coor_Z), App.Rotation(angleTr+90+correctionAngle+inclinaisonX,inclinaisonY+PivotCharachter,90+inclinaisonZ), App.Vector(0,0,0)) # pitch,roll...1
                            elif exterieur == 2:  # circumferential helix
                                plm = App.Placement(App.Vector(coor_X,coor_Y,coor_Z), App.Rotation(angleTr+90+correctionAngle+inclinaisonX,inclinaisonY+PivotCharachter,90+inclinaisonZ), App.Vector(0,0,0)) # pitch,roll...1
                                coor_Z = coor_Z + pas
                        else:                     # a plat
                            if exterieur == 1:    # exterieur (superieur)
                                plm = App.Placement(App.Vector(coor_X,coor_Y,coor_Z), App.Rotation(angleTr-90-correctionAngle+inclinaisonX+PivotCharachter,inclinaisonY,inclinaisonZ), App.Vector(0,0,0)) # pitch,roll...1
                            elif exterieur == 3:  # circumferential plat (clock)
                                if redressement == 1:
                                    plm = App.Placement(App.Vector(coor_X-centreX,coor_Y-centreY,coor_Z), App.Rotation(inclinaisonX+PivotCharachter,inclinaisonY,inclinaisonZ), App.Vector(0,0,0)) # pitch,roll...1
                                else:
                                    plm = App.Placement(App.Vector(coor_X-centreX,coor_Y-centreY,coor_Z), App.Rotation(angleTr+inclinaisonX+PivotCharachter,inclinaisonY,inclinaisonZ), App.Vector(centreX,centreY,centreZ)) # pitch,roll...1
                            else:                 # interieur  (inferieur)
                                plm = App.Placement(App.Vector(-coor_X,-coor_Y,-coor_Z), App.Rotation(angleTr+90+correctionAngle+inclinaisonX+PivotCharachter,180+inclinaisonY,180+inclinaisonZ), App.Vector(0,0,0)) # pitch,roll...1   
    
                        if epaisseur > 0:         # extrusion characrters
                            CharExtrude = Draft.extrude(ss,Base.Vector(0,0,epaisseur))
                            CharExtrude.Label = texte[ii2]
                            CharExtrude.Placement=plm 
                            try:
                                CharExtrude.ViewObject.DisplayMode = u"Flat Lines"
                            except Exception:
                                None
                            if self.CB_03_BBox.isChecked():
                                CharExtrude.ViewObject.BoundingBox = True
                            App.ActiveDocument.getObject(CharExtrude.Name).recompute()
                            comP.append(CharExtrude.Shape)
    #                        nameL.append(CharExtrude.Name)
                            FcString.addObject(CharExtrude)  # contener extrude
                        else:                 # 
                            ss.Placement=plm 
                            ss.Support=None
                            try:
                                ss.ViewObject.DisplayMode = u"Flat Lines"
                            except Exception:
                                None
                            if self.CB_03_BBox.isChecked():
                                ss.ViewObject.BoundingBox = True
                            comP.append(ss.Shape)
    #                        nameL.append(ss.Name)
    #                        points += [FreeCAD.Vector(coor_X,coor_Y,coor_Z)]  # coordinates makeBSpline
                        ####
                        if self.CB_01_Points.isChecked():
                            pointRepere = Draft.makePoint(plm.Base)
                            pointRepere.ViewObject.PointColor = (1.0,0.,0.0)
                            pointRepere.Label = texte[ii2]
                            App.ActiveDocument.getObject(pointRepere.Name).recompute()
                            FcStringPoints.addObject(pointRepere)
                        ####    
                        if self.CB_04_Progression.isChecked():
                            FreeCADGui.updateGui()                                 # rafraichi l'ecran
                        ####

            #BSpline = Draft.makeBSpline(points,closed=False)                  # makeBSpline repere
            App.ActiveDocument.removeObject(lineName)     # remove ligne de base directrice

        if (self.CB_02_Circle.isChecked()) and (passNoOk == 0):
            pll = FreeCAD.Placement()
            pll = App.Placement(App.Vector(PlacementX,PlacementY,PlacementZ), App.Rotation(App.Vector(0,0,1),0), App.Vector(0,0,0))
            circle = Draft.makeCircle(radius=rayon, placement=pll, face=False, support=None)
            circle.Label = textLabel
            circle.ViewObject.LineColor = (1.0,0.,0.0)
            Draft.autogroup(circle)

        if compount1 == 1:                            # create compount
            comp = Part.makeCompound(comP)
            Part.show(comp)
        ####Boucle de travail fin########################################################################

        ####Extrude support clock#############################################
        if nombreFaces > 0:                           # support clock
            pl = FreeCAD.Placement()
            if nombreFaces == 1:                      # circle
                pl.Base = FreeCAD.Vector(0.0,0.0,0.0)
                supp = Draft.makeCircle(cercleClock,placement=pl,face=True,support=None)
            if nombreFaces == 2:                      # rectangle
                cercleClock = cercleClock * 2
                pl.Base = FreeCAD.Vector(-cercleClock, (-cercleClock / 2), 0.0)
                supp = Draft.makeRectangle((cercleClock * 2), cercleClock, placement=pl, face = True)
            if nombreFaces > 2:                       # polygone with number faces
                if nombreFaces == 4:
                    rotateSupport = 45
                else:
                    rotateSupport = 90
                pl = App.Placement(App.Vector(0.0,0.0,0.0), App.Rotation(rotateSupport,0,0), App.Vector(0,0,0))
                supp = Draft.makePolygon(nombreFaces,cercleClock,inscribed = False,placement = pl,face = True,support=None)

            supp.MakeFace = True
            App.activeDocument().recompute()
            FcString.addObject(supp)                  # contener support

            if epaisSupp != 0:                        # extrude support clock
                suppExtrude = Draft.extrude(supp,Base.Vector(0,0,epaisSupp))
                App.ActiveDocument.getObject(suppExtrude.Name).recompute()
                try:
                    suppExtrude.ViewObject.DisplayMode = u"Flat Lines"
                    if self.CB_03_BBox.isChecked():
                        suppExtrude.ViewObject.BoundingBox = True
                except Exception:
                    None

                FcString.addObject(suppExtrude)       # contener support extrude

        App.activeDocument().recompute()

        ####Info################################################
        App.Console.PrintMessage("______________" +"\n")
        App.Console.PrintMessage( PolicePath + "\n")
        App.Console.PrintMessage("Texte         : " + str(texte)+"\n")
        App.Console.PrintMessage("Rayon         : " + str(rayon)+"\n")
        App.Console.PrintMessage("SizeCaractere : " + str(SizeCaractere)+"\n")
        App.Console.PrintMessage("Rotation      : " + str(debut) + "/" + str(rotation)+"\n")
        App.Console.PrintMessage("Debout        : " + str(debout)+"\n")
        App.Console.PrintMessage("_______________" +"\n")

        ####Reset################################################
        if switchResetFALSE == 0:    # zero (False) by default = reset
            ui.on_PU_Reset()

    def on_PB_Help_clicked(self):
        WebGui.openBrowser("https://wiki.freecadweb.org/Macro_FCCircularText")
        App.Console.PrintMessage("https://wiki.freecadweb.org/Macro_FCCircularText" + "\n")
#        print("Help ")

    def on_PU_Exit(self):                      # Exit
        global ui
        global s
        global switchModeTextList
        global switchFontComBox
        global setSystemFonts
        global seTtextAlignement
        global setFontByDefault
        global switchVersionSearch

        FreeCADGui.Selection.removeObserver(s)                              # desinstalle la fonction residente
        ###### Write Configuration begin ####
        FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macros/FCMmacros/" + __Title__).SetBool("switchResetFALSE", switchResetFALSE)     # True or False
        FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macros/FCMmacros/" + __Title__).SetString("setFontByDefault", setFontByDefault)   # "Arial"
        FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macros/FCMmacros/" + __Title__).SetBool("switchModeTextList", switchModeTextList) # True or False
        FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macros/FCMmacros/" + __Title__).SetBool("switchFontComBox", switchFontComBox)     # True or False
        FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macros/FCMmacros/" + __Title__).SetBool("setSystemFonts", setSystemFonts)         # True or False
        FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macros/FCMmacros/" + __Title__).SetInt("seTtextAlignement", seTtextAlignement)    # 0, 1, 2

        FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macros/FCMmacros/" + __Title__).SetBool("setPathOrthogonal", ui.RB_Path_01.isChecked())    # True or False
        FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macros/FCMmacros/" + __Title__).SetBool("setPathTangent", ui.RB_Path_02.isChecked())       # True or False
        FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macros/FCMmacros/" + __Title__).SetBool("setPositionBase", ui.RB_Position_01.isChecked())  # True or False
        FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macros/FCMmacros/" + __Title__).SetBool("setPositionCenter", ui.RB_Position_02.isChecked())# True or False
        FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macros/FCMmacros/" + __Title__).SetBool("setPositionTop", ui.RB_Position_03.isChecked())   # True or False
        FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macros/FCMmacros/" + __Title__).SetBool("switchVersionSearch", switchVersionSearch)        # True or False

        ###### Write Configuration end   ####
        App.Console.PrintMessage("Fin FCCircularText"+"\n")
        self.window.hide()
####
FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macros/FCMmacros/" + __Title__).SetString("Version",__Version__ + " (" + __Date__ + ")")# 

###### Read Configuration begin ####
seTtextAlignement  = FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macros/FCMmacros/" + __Title__).GetInt("seTtextAlignement")
setSystemFonts     = FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macros/FCMmacros/" + __Title__).GetBool("setSystemFonts")
switchFontComBox   = FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macros/FCMmacros/" + __Title__).GetBool("switchFontComBox")
switchModeTextList = FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macros/FCMmacros/" + __Title__).GetBool("switchModeTextList")
setFontByDefault   = FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macros/FCMmacros/" + __Title__).GetString("setFontByDefault")
switchResetFALSE   = FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macros/FCMmacros/" + __Title__).GetBool("switchResetFALSE")

setPathOrthogonal = FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macros/FCMmacros/" + __Title__).GetBool("setPathOrthogonal")
setPathTangent    = FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macros/FCMmacros/" + __Title__).GetBool("setPathTangent")
setPositionBase   = FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macros/FCMmacros/" + __Title__).GetBool("setPositionBase")
setPositionCenter = FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macros/FCMmacros/" + __Title__).GetBool("setPositionCenter")
setPositionTop    = FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macros/FCMmacros/" + __Title__).GetBool("setPositionTop")

if setFontByDefault == "":
    if platform.system()   == "Windows" :
        PolicePath = "C:/Windows/Fonts/"
        setFontByDefault = "ARIAL"
    elif platform.system() == "Linux" :
        PolicePath = "/usr/share/fonts/"
        setFontByDefault = "UBUNTU-M"
    elif platform.system() == "Darwin":
        PolicePath = "/Library/Fonts/"
        setFontByDefault = "Arial"
if platform.system() == "Linux" :
      PolicePath = "/usr/share/fonts/"

###### Read Configuration end   ####
##################################################################################################
class SelObserver:
    def addSelection(self, document, object, element, position):  # Selection
        global ui        
        global PlacementX
        global PlacementY
        global PlacementZ
        global correctionAngle

        try:
            selectedEdge = FreeCADGui.Selection.getSelectionEx()[0].SubObjects[0]  # select one subElement
            if (hasattr(selectedEdge,'Surface')) or (hasattr(selectedEdge,'Point')):
                if (hasattr(selectedEdge,'Point')):
                    PlacementX = position[0]
                    PlacementY = position[1]
                    PlacementZ = position[2]
                    ui.CH_Sp_Placement.setChecked(True)
                    ui.DS_PlacementX.setValue(PlacementX)
                    ui.DS_PlacementY.setValue(PlacementY)
                    ui.DS_PlacementZ.setValue(PlacementZ)
                    ui.on_CH_Sp_Placement()
            else:
                ui.groupBox_03.setEnabled(False)
                ui.groupBox_03.setStyleSheet("background-color: #F8E0E0;")
                ui.DS_Radius_Circle.setEnabled(False)
                ui.DS_Radius_Circle.setStyleSheet("background-color: #F8E0E0;")
                ui.S_Begin_Angle.setEnabled(False)
                ui.S_Begin_Angle.setStyleSheet("background-color: #F8E0E0;")
                ui.S_End_Angle.setEnabled(False)
                ui.S_End_Angle.setStyleSheet("background-color: #F8E0E0;")
                ui.DS_Correction_Radius.setEnabled(False)
                ui.DS_Correction_Radius.setStyleSheet("background-color: #F8E0E0;")
                ui.CB_02_Circle.setChecked(False)
                ui.CB_02_Circle.setEnabled(False)
                ui.CB_02_Circle.setStyleSheet("background-color: #F8E0E0;")
                ui.groupBox_055.setEnabled(True)
                ui.groupBox_055.setStyleSheet("background-color: #E0F8E0;") # #D0F5A9
                ui.groupBox_055.setTitle(_fromUtf8("Path ( " + str(round(selectedEdge.Length, 2)) + " mm )"))
                correctionAngle = 0.0
                ui.DS_Correction_Angle.setValue(correctionAngle)
        except Exception:
            selectedEdge = None
            None

##    def setPreselection(self,doc,obj,sub):             # preselection
##        print "setPreselection"
##    def removeSelection(self,doc,obj,sub):             # Effacer l'objet selectionne
##        print "removeSelection"
##    def setSelection(self,doc):                        # Selection dans ComboView
##        print "SelObserver quit macro"
    def clearSelection(self,doc):                      # Si clic sur l'ecran, effacer la selection
        #ui.on_PU_Reset_Placement()
        ui.groupBox_03.setEnabled(True)
        ui.groupBox_03.setStyleSheet("Base")
        ui.DS_Radius_Circle.setEnabled(True)
        ui.DS_Radius_Circle.setStyleSheet("Base")
        ui.S_Begin_Angle.setEnabled(True)
        ui.S_Begin_Angle.setStyleSheet("Base")
        ui.S_End_Angle.setEnabled(True)
        ui.S_End_Angle.setStyleSheet("Base")
        ui.DS_Correction_Radius.setEnabled(True)
        ui.DS_Correction_Radius.setStyleSheet("Base")
        ui.CB_02_Circle.setEnabled(True)
        ui.CB_02_Circle.setStyleSheet("Base")
        ui.groupBox_055.setTitle(_fromUtf8("Path"))
        ui.groupBox_055.setStyleSheet("Base")
        ui.groupBox_055.setEnabled(False)

s=SelObserver()
FreeCADGui.Selection.addObserver(s)                    # installe la fonction en mode resident
###################################################################################################

# deselecter tous les objets
try:
    for obj in FreeCAD.ActiveDocument.Objects:         # deslectionne tout
        FreeCADGui.Selection.removeSelection(obj)
except Exception:
    None

MainWindow = QtWidgets.QMainWindow()
ui = Ui_MainWindow()
ui.setupUi(MainWindow)
MainWindow.show()

o tele carica lo script :

- on github Macro_FCCircularText.FCMacro ver 0.16d 2020/09/15

- o dal forum Extrude from curved surface of cylinder

Esempi












Esempi su ellisse






Modalità rilievo:





Example section path



Limitativo

Note (PS: è possibile che si verifichi un errore tra le versioni. Pubblica il problema sul forum e attendi la correzione aggiornata o il rollback a una versione precedente della macro. Grazie)

È possibile che due caratteri si sovrappongano, qui un piccolo rimedio con Macro_Rotate_To_Point


(non totalmente sviluppato)

In projetto :

Scrivere un testo circolare posizionato su un oggetto selezionato

Currently:

  • ver 0.17b 2020/09/28 : correction little bug (pl instead plm in path section) and arrange the window (dimension) Clock, Helix, Path
  • ver 0.17 2020/09/26 : adding create circular text on wire (curve, arc, spline, line ...) selected, mode word

ver 16d 2020/09/15 : vedi MasterCATZ commented Sep 14, 2020 message

Elimina il FC 0.18 test sezione:

#### Test FreeCAD.Version simple ############################################################################################################
if int(FreeCAD.Version()[1]) < 18:      # Version de FreeCAD
    FreeCAD.Console.PrintMessage("This version " + __Title__ + " rmu  work with the FreeCAD 0.18 or higher." + "\n\n")
    FreeCAD.Console.PrintMessage("For the precedent version see the page " + "\n\n")
    FreeCAD.Console.PrintMessage("https://gist.githubusercontent.com/mario52a/a25e802498bae6959335/raw/db47f78f2b20a35137ac213b8d1a62d30f525dcb/Macro_FCCircularText.FCMacro" + "\n\n")
#### Test FreeCAD.Version simple ############################################################################################################
  • ver 0.16 2020/06/07 : little bug in Linux with the path, impost PolicePath = "/usr/share/fonts/" (stay on path /xx/xx/xx/xx/xx/xx/ on entry)
  • ver 0.15 2020/06/01 : For PySide2 Qt5 adding matplotlib fonts in comboView, config on parameter
  • ver 0.14-4 2020/04/25 : corretto con "DisplayMode = u"Flat Lines" :
  • ver 0.14-3 2020/04/25 : adatto per :
OS: Windows 10 (10.0)
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.19.20655 (Git)
Build type: Release
Branch: master
Hash: e8e67e8c5ebbc9f9ed9ea67aba5b891969595ece
Python version: 3.6.8
Qt version: 5.12.1
Coin version: 4.0.0a
OCC version: 7.3.0
       carDegrees = b' \xc2\xb0'.decode("utf-8")    #thanks wmayer	https://forum.freecadweb.org/viewtopic.php?f=13&t=36380&p=308476#p308357
       self.DS_InclinaisonX.setSuffix(carDegrees)
       self.DS_InclinaisonY.setSuffix(carDegrees)
       self.DS_InclinaisonZ.setSuffix(carDegrees)
  • ver 0.14-1 2019/06/11 replace "°" to chr(176)
  • ver 0.14 2019/04/27 compatibile con Python 3.6.6 and Qt 5.6.2 (cause: unicode() )
latest testing:

#OS: Windows 10
#Word size of OS: 64-bit
#Word size of FreeCAD: 64-bit
#Version: 0.19.16523 (Git)
#Build type: Release
#Branch: master
#Hash: 9b3ec233c8b21e0df66fada487cd10f471d60cac
#Python version: 3.6.6
#Qt version: 5.6.2
#Coin version: 4.0.0a
#OCC version: 7.3.0
  • ver 0.13 30/01/2018 add feature Pivot for rotate the character on himself
  • ver 0.13 09/08/2016 replace the button "New font" to "fontComboBox" cause , with Windows 10 the window Font stay empty the files are hidden
  • ver 0.12 03/07/2016 optimize the code for accept the decimal number in determination angle

replace the line

for angleTr in range(debut,rotation,((rotation-debut)/nombre)):

to

for angleTrFloat in range((debut*10000),(rotation*10000),int((round(((float(rotation)-float(debut))/float(nombre)),4)*10000)) ):    # pour 4 decimales
                angleTr = (float(angleTrFloat)/10000)
  • ver 0.10 17/05/2015 adding lines 1365, 1366 only created more clock face ?? ()
supp.MakeFace = True
            App.activeDocument().recompute()
  • ver 0.9 11/05/2015 thank you NormandC for testing

replace

self.DS_InclinaisonX.setSuffix(" X°")
        self.DS_InclinaisonY.setSuffix(" Y°")
        self.DS_InclinaisonZ.setSuffix(" Z°")

to

self.DS_InclinaisonX.setSuffix(unicode(" X°"))
        self.DS_InclinaisonY.setSuffix(unicode(" Y°"))
        self.DS_InclinaisonZ.setSuffix(unicode(" Z°"))
  • ver 0.8 10/05/2015 replace "String=texte[ii2]" to "String=unicode(texte[ii2])" line 1290. cause "TypeError: Property 'FontFile': type must be str or unicode, not QString"
# ver 0.8 10/05/2015 /_ # testing with OS :
##################################################################################################
# OS: Ubuntu 14.04.1 LTS                          # OS: Ubuntu 14.04.2 LTS
# Platform: 32-bit                                # Word size of OS: 32-bit
# Version: 0.14.2935 (Git)                        # Word size of FreeCAD: 32-bit
# Branch: master                                  # Version: 0.16.4928 (Git)
# Hash: eab159b6ee675012bf79de838c206a311e911d85  # Branch: master
# Python version: 2.7.6                           # Hash: d8f63bcfd10301f3d1e141cced4370f0782238d0
# Qt version: 4.8.6                               # Python version: 2.7.6
# Coin version: 4.0.0a                            # Qt version: 4.8.6
# SoQt version: 1.6.0a                            # Coin version: 4.0.0a
# OCC version: 6.7.0                              # OCC version: 6.8.0.oce-0.17
##################################################################################################
# OS: Windows Vista                               # OS: Windows Vista
# Word size of OS: 32-bit                         # Word size of OS: 32-bit
# Word size of FreeCAD: 32-bit                    # Word size of FreeCAD: 32-bit
# Version: 0.15.4527 (Git)                        # Version: 0.15.4671 (Git)
# Branch: master                                  # Branch: releases/FreeCAD-0-15
# Hash: 0da2e4c45a9a259c26abd54c2a35393e1c15696f  # Hash: 244b3aef360841646cbfe80a1b225c8b39c8380c
# Python version: 2.7.8                           # Python version: 2.7.8
# Qt version: 4.8.6                               # Qt version: 4.8.6
# Coin version: 4.0.0a                            # Coin version: 4.0.0a
# OCC version: 6.7.1                              # OCC version: 6.8.0.oce-0.17
##################################################################################################
  • ver 0.7 02/02/2015 suppression 2 str App.Console.PrintMessage(str(PolicePath)+"\n") to App.Console.PrintMessage((PolicePath)+"\n") that caused an error with the characters above 128 in the police path.
  • ver 0.6 23/11/2014 corrected "texte = unicode(self.textEdit.toPlainText())" now accept "'éèà@..."
  • ver 0.5 19/11/2014 Gui
  • ver 0.4 10/10/2014 add variable "rotation" in the loop (for i in range(0,rotation,(rotation/nombre)): # 360 a parametrer)
  • ver 0.4 27/08/2014 correction error of de radius (exterieur=0, debout=1)
  • ver 0.3 26/08/2014 add creation text of flat curve
  • ver 0.2 26/08/2014 add creation text of internal curve
  • ver 0.1

(2537)

Link

I commenti nella pagina del forum: Extrude from curved surface of cylinder