Makro EdgesToArc (Hrany do oblouku)

File:Text-x-python EdgesToArc
Description
Pokud je to možné nahradí vybrané hrany kružnicovým obloukem. Užitečné pro obnovu rozpadlých oblouků. Author: Jreinhardt
Author
Jreinhardt
Download
None
Links
Macros recipes How to install macros How to customize toolbars
Macro Version
1.0
Date last modified
None
FreeCAD Version(s)
None
Default shortcut
None
See also
None

Občas někdo narazí na drát, který obsahuje oblouk vytvořený z malých přímých segmentů. Často se to stává při práci se soubory z jiných programů. Toto makro umožňuje relativně snadno konvertovat takový oblouk složený z přímek vrátit do kružnicového oblouku. Snižuje to velikost souboru a soubor to dělá mnohem snadněji zpracovatelným,

To use this macro, you have to break down the wire into individual edges using the Draft Downgrade function. Then just select the segments that you want to replace by an circular arc and execute the macro. You need at least two segments.

The macro will check whether the segments all lie on a common circle and will abort if this is not the case. Otherwise it will create the arc and remove the segments.

Because of small inaccuracies in the calculations, the Draft Upgrade function can sometimes fail to recombine the other edges and the arcs back into a wire. In this case the Macro_SuperWire provides a more robust way to do this.

import Draft
import FreeCADGui, FreeCAD
from FreeCAD import Base, Console
from math import atan2, pi, fabs

#This macro replaces a number of edges approximating a circular arc by a proper circular arc.
#It might be necessary to use the superwire macro to recombine the edges back to a wire, because of small errors in the calculations.

sel = FreeCADGui.Selection.getSelection()
if len(sel) < 2:
    Console.PrintError("Too few edges are selected\n")
edges = [s.Shape for s in sel]

start_vertices = []
end_vertices = []
for edge in edges:
    start_vertices.append(edge.Vertexes[0].Point)
    end_vertices.append(edge.Vertexes[1].Point)
vertices = start_vertices + end_vertices

start,end,middle = None,None,None

#find start and end points
for edge in edges:
    is_start = True
    is_end = True
    for point in end_vertices:
        if edge.Vertexes[0].Point.distanceToPoint(point) < 1e-8:
            is_start = False

    for point in start_vertices:
        if edge.Vertexes[1].Point.distanceToPoint(point) < 1e-8:
            is_end = False
    if is_start:
        start = edge.Vertexes[0].Point
    if is_end:
        end = edge.Vertexes[1].Point

#find middle point, at least not too far away from the middle

for v in vertices:
    ratio = v.distanceToPoint(start)/v.distanceToPoint(end)
    if ratio > 0.5 and ratio < 2.:
        middle = v
        break

if middle is None:
    Console.PrintError("Could not find suitable middle point\n")

arc = Part.ArcOfCircle(start,middle,end)

#Check circularity
circular = True
for v in vertices:
    if fabs(v.distanceToPoint(arc.Center) - arc.Radius) > 1e-6:
        Console.PrintError("Edges do not approximate a circular arc\n")
        circular = False
        break

if circular:
        Part.show(arc.toShape())
        for shape in sel:
            FreeCAD.ActiveDocument.removeObject(shape.Name)