Macro Delta xyz/it: Difference between revisions

From FreeCAD Documentation
(Created page with "Se viene premuto il tasto {{KEY|SHIFT}}, il valore Delta inizia dalla coordinata 0,0,0 fino al punto cliccato (la coordinata 0,0,0 viene visualizzata in rosso).")
(Created page with "Un'opzione è possibile affinché la macro rimanga residente (continua) quindi premere {{KEY|Q}} per uscire dalla macro e un'opzione per imporre il numero di decimali.")
Line 19: Line 19:
Se viene premuto il tasto {{KEY|SHIFT}}, il valore Delta inizia dalla coordinata 0,0,0 fino al punto cliccato (la coordinata 0,0,0 viene visualizzata in rosso).
Se viene premuto il tasto {{KEY|SHIFT}}, il valore Delta inizia dalla coordinata 0,0,0 fino al punto cliccato (la coordinata 0,0,0 viene visualizzata in rosso).


One option is possible for the macro stay resident (continuous) then push {{KEY|Q}} to quit the macro, and one option for impose the number of decimals.
Un'opzione è possibile affinché la macro rimanga residente (continua) quindi premere {{KEY|Q}} per uscire dalla macro e un'opzione per imporre il numero di decimali.


<div class="mw-translate-fuzzy">
<div class="mw-translate-fuzzy">

Revision as of 19:43, 23 October 2020

Delta xyz

Descrizione
Fornisce il valore Delta xyz e la distanza tra 2 punti.
Se si preme il tasto "SHIFT", il valore delta inizia dalla coordinata 0,0,0 fino al punto cliccato (la coordinata 0,0,0 viene visualizzata in rosso).
Un'opzione è possibile per la macro soggiorno residente (continuo) quindi premere il tasto "Q" per uscire dalla macro e l'opzione per imporre il numero di decimali o utilizzare il decimale nell'opzione di preferenza.

Versione macro: 0.2
Ultima modifica: 2020-10-23
Versione FreeCAD: Tutte versione
Download: [https://www.freecadweb.org/wiki/images/f/f4/Macro_Delta_xyz.png

Icona per la ToolBar]
Autore: Mario52

Autore
Mario52
Download
[https://www.freecadweb.org/wiki/images/f/f4/Macro_Delta_xyz.png

Icona per la ToolBar]

Link
Versione macro
0.2
Data ultima modifica
2020-10-23
Versioni di FreeCAD
Tutte versione
Scorciatoia
Nessuna
Vedere anche
Part Measure Toggle Delta

Descrizione

Dà il valore Delta tra 2 punti è la lunghezza tra i due punti.

Se viene premuto il tasto SHIFT, il valore Delta inizia dalla coordinata 0,0,0 fino al punto cliccato (la coordinata 0,0,0 viene visualizzata in rosso).

Un'opzione è possibile affinché la macro rimanga residente (continua) quindi premere Q per uscire dalla macro e un'opzione per imporre il numero di decimali.

Utilizzo

  1. Lanciare la macro
  2. Selezionare il primo punto nella vista 3D
  3. Selezionare il cecondo punto nella vista 3D è vera li informazione nella vista rapporto
  4. Fare clic dentro la finestra Vista combinata per uscire della funzione

If the SHIFT key is pressed, the Delta value begin on coordinate 0,0,0 to point clicked (the coordinate 0,0,0 is displayed in red).

If its is configured "Permanent" (continuous), click the Q key for quit the macro

Configure

For modify the value : go to : FreeCAD → Menu → Tools → Edit parameters... → BaseApp/Preferences/Macros/FCMmacros/Delta_XYZ.

_____switchDecimalsPref_____

  • true 1 : the round value takes the global preferences value
  • false 0 : the round value takes your choice

_____setArrondi_____

  • set your choice round value
  • if your choice = 0 : the round value is 3 by default

_____switchResident_____

  • true 1 : the macro stay resident (Type Q to quit)
  • false 0 : the macro is used on run and quit after use


Script

ToolBar Icon

Macro_Delta_xyz.FCMacro

# -*- coding: utf-8 -*-
#Delta x y z Click Q to quit
#
#OS: Windows 10 (10.0)
#Word size of OS: 64-bit
#Word size of FreeCAD: 64-bit
#Version: 0.19.22808 (Git)
#Build type: Release
#Branch: master
#Hash: 72eb41b24f12b572d55081042160954b93f4614c
#Python version: 3.6.8
#Qt version: 5.12.1
#Coin version: 4.0.0a
#OCC version: 7.3.0
#Locale: French/Mars(fr_Ma)
#
__title__   = "Delta_XYZ"
__author__  = "Mario52"
__url__     = "https://www.freecadweb.org/wiki/Main_Page"
__Wiki__    = "https://wiki.freecadweb.org/Macro_Delta_xyz"
__version__ = "00.02"
__date__    = "2020/10/23"    #YYYY/MM/DD

import Draft, Part
import math
from FreeCAD import Base
import FreeCAD, FreeCADGui
App = FreeCAD
Gui = FreeCADGui

global positionX1 ;positionX1 = 0.0
global positionY1 ;positionY1 = 0.0
global positionZ1 ;positionZ1 = 0.0
global positionX2 ;positionX2 = 0.0
global positionY2 ;positionY2 = 0.0
global positionZ2 ;positionZ2 = 0.0
global pas        ;pas        = 0

global setArrondi                    # round value
global switchResident                # switch resident 0=not resident, 1=stay resident
global switchDecimalsPref            # switch unit preference or not

#### Configuration begin      #### 
#### NOT MODIFY THE CODE HERE ####
#### for modify : go to : FreeCAD >Menu >Tools >Edit parameters... >BaseApp/Preferences/Macros/FCMmacros/Delta_XYZ ####
##
FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macros/FCMmacros/" + __title__).SetString("Version", __version__ + " (" + __date__ + ")")
##
switchResident = FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macros/FCMmacros/" + __title__).GetBool("switchResident")   # switch Resident or not
if switchResident == False:
    FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macros/FCMmacros/" + __title__).SetBool("switchResident", switchResident)# switch Resident or not : 0 = Not Resident 1 = Resident
##
switchDecimalsPref = FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macros/FCMmacros/" + __title__).GetBool("switchDecimalsPref")   # switch unit preference or not
if switchDecimalsPref == True:
    setArrondi = FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Units").GetInt("Decimals")    # unit in preferences
else:
    FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macros/FCMmacros/" + __title__).SetBool("switchDecimalsPref", switchDecimalsPref)# 
    setArrondi = FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macros/FCMmacros/" + __title__).GetInt("setArrondi")
    if setArrondi < 1:
        FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macros/FCMmacros/" + __title__).SetInt("setArrondi", 3) # setArrondi
        setArrondi = FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macros/FCMmacros/" + __title__).GetInt("setArrondi")

##
####Configuration###################################################################################################################

## Tool Draft def : sub, length, dist
def sub(first, other): 
	"sub(Vector,Vector) - subtracts second vector from first one"
	if isinstance(first,FreeCAD.Vector) and isinstance(other,FreeCAD.Vector):
		return FreeCAD.Vector(first.x-other.x, first.y-other.y, first.z-other.z)
def length(first):
	"lengh(Vector) - gives vector length"
	if isinstance(first,FreeCAD.Vector):
		return math.sqrt(first.x*first.x + first.y*first.y + first.z*first.z)
def dist(first, other):
	"dist(Vector,Vector) - returns the distance between both points/vectors"
	if isinstance(first,FreeCAD.Vector) and isinstance(other,FreeCAD.Vector):
		return length(sub(first,other))

import FreeCAD, FreeCADGui 

#########
doc = FreeCAD.ActiveDocument
if doc == None:
    doc = FreeCAD.newDocument("Delta x y z")
#########

##key
global i     ; i = 0   
global c     ; c = ""
global d     ; d = ""
global v     ; v = Gui.activeDocument().activeView()
global o     ; o = ""
global s     ; s = ""
global SHIFT ; SHIFT = ""
global DOWN  ; DOWN = ""
##

class ViewObserver:
    def keyPosition(self, info):
#        global i
#        global c
        global SHIFT
        global DOWN
        global s 
        global d 
        global v
        global o

        SHIFT = ""
        key = info["Key"]

        if (key.upper() == "SHIFT") and (info["ShiftDown"] == False):  #
            SHIFT = "SHIFT"
            DOWN  = "DOWN"
            key   = ""

        if key.upper() == "Q":
            FreeCADGui.Selection.removeObserver(s)                     # Uninstalls the resident function
            v.removeEventCallback("SoKeyboardEvent",d)
            App.Console.PrintMessage("____End Delta_XYZ____" + "\n")
        xx = info["Key"]

class SelObserver:
    def addSelection(self,document, object, element, position):  # Selection
        global pas
        global positionX1
        global positionY1
        global positionZ1
        global positionX2
        global positionY2
        global positionZ2
        global SHIFT
        global DOWN
        global s 
        global d 
        global v

        pas+=1
        if (SHIFT == "SHIFT") and (DOWN == "DOWN"):
            positionX1 = 0.0
            positionY1 = 0.0
            positionZ1 = 0.0
            App.Console.PrintError("Begin    : X1 "+str(positionX1)+" Y1: "+str(positionY1)+" Z1: "+str(positionZ1)+"\n")    
            pas = 2
            SHIFT = DOWN  = ""

        if pas==1:
            positionX1 = round(position[0],setArrondi)
            positionY1 = round(position[1],setArrondi)
            positionZ1 = round(position[2],setArrondi)
            App.Console.PrintMessage("Begin    : X1 "+str(positionX1)+" Y1: "+str(positionY1)+" Z1: "+str(positionZ1)+"\n")    
        else:
            positionX2 = round(position[0],setArrondi)
            positionY2 = round(position[1],setArrondi)
            positionZ2 = round(position[2],setArrondi)
            App.Console.PrintMessage("End      : X2 "+str(positionX2)+" Y2: "+str(positionY2)+" Z2: "+str(positionZ2)+"\n")    
            App.Console.PrintMessage("Delta X  : "+str(round(abs(positionX1-positionX2),setArrondi))+"\n")    
            App.Console.PrintMessage("Delta Y  : "+str(round(abs(positionY1-positionY2),setArrondi))+"\n")    
            App.Console.PrintMessage("Delta Z  : "+str(round(abs(positionZ1-positionZ2),setArrondi))+"\n")    
            v1=FreeCAD.Vector(positionX1,positionY1,positionZ1)
            v2=FreeCAD.Vector(positionX2,positionY2,positionZ2)
            distance = dist(v1,v2)
            App.Console.PrintMessage("Distance : "+ str(round(distance,setArrondi))+"\n")
            App.Console.PrintMessage("__________________________________"+"\n")
            pas=0
            if switchResident == False:
                FreeCADGui.Selection.removeObserver(s)                     # Uninstalls the resident function
                v.removeEventCallback("SoKeyboardEvent",d)                 # Uninstalls the resident function


pas = 0
s=SelObserver()
FreeCADGui.Selection.addObserver(s)          # install the function mode resident 
## key
o = ViewObserver()                           # install the function mode resident 
d = v.addEventCallback("SoKeyboardEvent",o.keyPosition)
App.Console.PrintMessage("____Begin Delta_XYZ____" + "\n")
##
FreeCAD.Console.PrintMessage("\n"+"####Configure################################################################################################" + "\n\n")
FreeCAD.Console.PrintMessage("For modify the value : go to : FreeCAD >Menu >Tools >Edit parameters... >BaseApp/Preferences/Macros/FCMmacros/Delta_XYZ"+"\n\n")
FreeCAD.Console.PrintMessage("_____switchDecimalsPref_____  ")
FreeCAD.Console.PrintError("Actual " + str(switchDecimalsPref)+"\n")
FreeCAD.Console.PrintMessage("switchDecimalsPref : True  1 : the round value takes the global preferences value "+"\n")
FreeCAD.Console.PrintMessage("                   : False 0 : the round value takes your choice "+"\n\n")
FreeCAD.Console.PrintMessage("_____setArrondi_____  ")
FreeCAD.Console.PrintError("Actual " + str(setArrondi)+"\n")
FreeCAD.Console.PrintMessage("setArrondi         : set your choice round value"+"\n")
FreeCAD.Console.PrintMessage("                   : if your choice = 0 : the round value is 3 by default "+"\n\n")
FreeCAD.Console.PrintMessage("_____switchResident_____  ")
FreeCAD.Console.PrintError("Actual " + str(switchResident)+"\n")
FreeCAD.Console.PrintMessage("switchResident     : True  1 : the macro stay resident (Type Q to quit)"+"\n")
FreeCAD.Console.PrintMessage("                   : False 0 : the macro is used on run and quit after use"+"\n")
FreeCAD.Console.PrintMessage("\n"+"####Configure end############################################################################################" + "\n")
FreeCAD.Console.PrintMessage("\n"+"####Use######################################################################################################" + "\n")
FreeCAD.Console.PrintMessage("Use : click the first point, click the second point, the data is diplayed"+"\n")
FreeCAD.Console.PrintMessage("    : press the SHIFT button click the point, the Delta is displayed with the coordinate X=0,Y=0,Z=0 to point clicked X, Y, Z"+"\n")
FreeCAD.Console.PrintMessage("    : the first coordinate X=0, Y=0, Z=0 is displayed in red"+"\n")
FreeCAD.Console.PrintMessage("####Use end#######################################################################################################" + "\n\n")
##

Version

Version 0.2 2020-10-23 : adding push the key SHIFT, click one point and the delta value begin 0,0,0 to point clicked, Q for quit the macro
Adding options configurable in preference FC

Version 0.1 2013-11-29 :