Macro Delta xyz

From FreeCAD Documentation
Revision as of 19:52, 23 October 2020 by Mario52 (talk | contribs) (Created page with "Eine Option ist möglich, damit das Makro resident bleibt (fortlaufend). Drücken Sie dann {{KEY|Q}}, um das Makro zu beenden, und eine Option, um die Anzahl der Dezimalstelle...")

Macro Delta xyz

Beschreibung
Gibt die Delta-Werte und den Abstand zwischen zwei Punkten an.Wählen Sie den zweiten Punkt in der 3D-Ansicht aus.
Wenn die Taste "UMSCHALT" gedrückt wird, beginnt der Delta-Wert an der Koordinate 0,0,0 bis zum angeklickten Punkt (die Koordinate 0,0,0 wird rot angezeigt).
Eine Option ist möglich, damit das Makro resident bleibt (fortlaufend). Drücken Sie dann die Taste "Q", um das Makro zu beenden, und die Option, die Anzahl der Dezimalstellen festzulegen, oder verwenden Sie die Dezimalstelle in der Einstellungsoption.

Versionsmakro : 0.2
Datum der letzten Änderung : 2020-10-23
FreeCAD version : All
Herunterladen : ToolBar Icon
Autor: Mario52
Autor
Mario52
Herunterladen
ToolBar Icon
Links
Macro-Version
0.2
Datum der letzten Änderung
2020-10-23
FreeCAD-Version(s)
All
Standardverknüpfung
SHIFT, Q
Siehe auch
Part Measure Toggle Delta

Beschreibung

Gibt die Delta-Werte und den Abstand zwischen zwei Punkten an.

Wenn die Taste SHIFT gedrückt wird, beginnt der Delta-Wert an der Koordinate 0,0,0 bis zum angeklickten Punkt (die Koordinate 0,0,0 wird rot angezeigt).

Eine Option ist möglich, damit das Makro resident bleibt (fortlaufend). Drücken Sie dann Q, um das Makro zu beenden, und eine Option, um die Anzahl der Dezimalstellen festzulegen.

Wie verwende ich

  1. Starten Sie das Makro
  2. Wählen Sie den ersten Punkt in der 3D-Ansicht
  3. Wählen Sie den zweiten Punkt in der 3D-Ansicht
  4. Klicken Sie zum Beenden in ComboView

If the SHIFT key is pressed, the Delta value begin on coordinate 0,0,0 to point clicked (the coordinate 0,0,0 is displayed in red).

If its is configured "Permanent" (continuous), click the Q key for quit the macro

Configure

For modify the value : go to : FreeCAD → Menu → Tools → Edit parameters... → BaseApp/Preferences/Macros/FCMmacros/Delta_XYZ.

_____switchDecimalsPref_____

  • true 1 : the round value takes the global preferences value
  • false 0 : the round value takes your choice

_____setArrondi_____

  • set your choice round value
  • if your choice = 0 : the round value is 3 by default

_____switchResident_____

  • true 1 : the macro stay resident (Type Q to quit)
  • false 0 : the macro is used on run and quit after use


Skript

ToolBar Icon

Macro_Delta_xyz.FCMacro

# -*- coding: utf-8 -*-
#Delta x y z Click Q to quit
#
#OS: Windows 10 (10.0)
#Word size of OS: 64-bit
#Word size of FreeCAD: 64-bit
#Version: 0.19.22808 (Git)
#Build type: Release
#Branch: master
#Hash: 72eb41b24f12b572d55081042160954b93f4614c
#Python version: 3.6.8
#Qt version: 5.12.1
#Coin version: 4.0.0a
#OCC version: 7.3.0
#Locale: French/Mars(fr_Ma)
#
__title__   = "Delta_XYZ"
__author__  = "Mario52"
__url__     = "https://www.freecadweb.org/wiki/Main_Page"
__Wiki__    = "https://wiki.freecadweb.org/Macro_Delta_xyz"
__version__ = "00.02"
__date__    = "2020/10/23"    #YYYY/MM/DD

import Draft, Part
import math
from FreeCAD import Base
import FreeCAD, FreeCADGui
App = FreeCAD
Gui = FreeCADGui

global positionX1 ;positionX1 = 0.0
global positionY1 ;positionY1 = 0.0
global positionZ1 ;positionZ1 = 0.0
global positionX2 ;positionX2 = 0.0
global positionY2 ;positionY2 = 0.0
global positionZ2 ;positionZ2 = 0.0
global pas        ;pas        = 0

global setArrondi                    # round value
global switchResident                # switch resident 0=not resident, 1=stay resident
global switchDecimalsPref            # switch unit preference or not

#### Configuration begin      #### 
#### NOT MODIFY THE CODE HERE ####
#### for modify : go to : FreeCAD >Menu >Tools >Edit parameters... >BaseApp/Preferences/Macros/FCMmacros/Delta_XYZ ####
##
FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macros/FCMmacros/" + __title__).SetString("Version", __version__ + " (" + __date__ + ")")
##
switchResident = FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macros/FCMmacros/" + __title__).GetBool("switchResident")   # switch Resident or not
if switchResident == False:
    FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macros/FCMmacros/" + __title__).SetBool("switchResident", switchResident)# switch Resident or not : 0 = Not Resident 1 = Resident
##
switchDecimalsPref = FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macros/FCMmacros/" + __title__).GetBool("switchDecimalsPref")   # switch unit preference or not
if switchDecimalsPref == True:
    setArrondi = FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Units").GetInt("Decimals")    # unit in preferences
else:
    FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macros/FCMmacros/" + __title__).SetBool("switchDecimalsPref", switchDecimalsPref)# 
    setArrondi = FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macros/FCMmacros/" + __title__).GetInt("setArrondi")
    if setArrondi < 1:
        FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macros/FCMmacros/" + __title__).SetInt("setArrondi", 3) # setArrondi
        setArrondi = FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macros/FCMmacros/" + __title__).GetInt("setArrondi")

##
####Configuration###################################################################################################################

## Tool Draft def : sub, length, dist
def sub(first, other): 
	"sub(Vector,Vector) - subtracts second vector from first one"
	if isinstance(first,FreeCAD.Vector) and isinstance(other,FreeCAD.Vector):
		return FreeCAD.Vector(first.x-other.x, first.y-other.y, first.z-other.z)
def length(first):
	"lengh(Vector) - gives vector length"
	if isinstance(first,FreeCAD.Vector):
		return math.sqrt(first.x*first.x + first.y*first.y + first.z*first.z)
def dist(first, other):
	"dist(Vector,Vector) - returns the distance between both points/vectors"
	if isinstance(first,FreeCAD.Vector) and isinstance(other,FreeCAD.Vector):
		return length(sub(first,other))

import FreeCAD, FreeCADGui 

#########
doc = FreeCAD.ActiveDocument
if doc == None:
    doc = FreeCAD.newDocument("Delta x y z")
#########

##key
global i     ; i = 0   
global c     ; c = ""
global d     ; d = ""
global v     ; v = Gui.activeDocument().activeView()
global o     ; o = ""
global s     ; s = ""
global SHIFT ; SHIFT = ""
global DOWN  ; DOWN = ""
##

class ViewObserver:
    def keyPosition(self, info):
#        global i
#        global c
        global SHIFT
        global DOWN
        global s 
        global d 
        global v
        global o

        SHIFT = ""
        key = info["Key"]

        if (key.upper() == "SHIFT") and (info["ShiftDown"] == False):  #
            SHIFT = "SHIFT"
            DOWN  = "DOWN"
            key   = ""

        if key.upper() == "Q":
            FreeCADGui.Selection.removeObserver(s)                     # Uninstalls the resident function
            v.removeEventCallback("SoKeyboardEvent",d)
            App.Console.PrintMessage("____End Delta_XYZ____" + "\n")
        xx = info["Key"]

class SelObserver:
    def addSelection(self,document, object, element, position):  # Selection
        global pas
        global positionX1
        global positionY1
        global positionZ1
        global positionX2
        global positionY2
        global positionZ2
        global SHIFT
        global DOWN
        global s 
        global d 
        global v

        pas+=1
        if (SHIFT == "SHIFT") and (DOWN == "DOWN"):
            positionX1 = 0.0
            positionY1 = 0.0
            positionZ1 = 0.0
            App.Console.PrintError("Begin    : X1 "+str(positionX1)+" Y1: "+str(positionY1)+" Z1: "+str(positionZ1)+"\n")    
            pas = 2
            SHIFT = DOWN  = ""

        if pas==1:
            positionX1 = round(position[0],setArrondi)
            positionY1 = round(position[1],setArrondi)
            positionZ1 = round(position[2],setArrondi)
            App.Console.PrintMessage("Begin    : X1 "+str(positionX1)+" Y1: "+str(positionY1)+" Z1: "+str(positionZ1)+"\n")    
        else:
            positionX2 = round(position[0],setArrondi)
            positionY2 = round(position[1],setArrondi)
            positionZ2 = round(position[2],setArrondi)
            App.Console.PrintMessage("End      : X2 "+str(positionX2)+" Y2: "+str(positionY2)+" Z2: "+str(positionZ2)+"\n")    
            App.Console.PrintMessage("Delta X  : "+str(round(abs(positionX1-positionX2),setArrondi))+"\n")    
            App.Console.PrintMessage("Delta Y  : "+str(round(abs(positionY1-positionY2),setArrondi))+"\n")    
            App.Console.PrintMessage("Delta Z  : "+str(round(abs(positionZ1-positionZ2),setArrondi))+"\n")    
            v1=FreeCAD.Vector(positionX1,positionY1,positionZ1)
            v2=FreeCAD.Vector(positionX2,positionY2,positionZ2)
            distance = dist(v1,v2)
            App.Console.PrintMessage("Distance : "+ str(round(distance,setArrondi))+"\n")
            App.Console.PrintMessage("__________________________________"+"\n")
            pas=0
            if switchResident == False:
                FreeCADGui.Selection.removeObserver(s)                     # Uninstalls the resident function
                v.removeEventCallback("SoKeyboardEvent",d)                 # Uninstalls the resident function


pas = 0
s=SelObserver()
FreeCADGui.Selection.addObserver(s)          # install the function mode resident 
## key
o = ViewObserver()                           # install the function mode resident 
d = v.addEventCallback("SoKeyboardEvent",o.keyPosition)
App.Console.PrintMessage("____Begin Delta_XYZ____" + "\n")
##
FreeCAD.Console.PrintMessage("\n"+"####Configure################################################################################################" + "\n\n")
FreeCAD.Console.PrintMessage("For modify the value : go to : FreeCAD >Menu >Tools >Edit parameters... >BaseApp/Preferences/Macros/FCMmacros/Delta_XYZ"+"\n\n")
FreeCAD.Console.PrintMessage("_____switchDecimalsPref_____  ")
FreeCAD.Console.PrintError("Actual " + str(switchDecimalsPref)+"\n")
FreeCAD.Console.PrintMessage("switchDecimalsPref : True  1 : the round value takes the global preferences value "+"\n")
FreeCAD.Console.PrintMessage("                   : False 0 : the round value takes your choice "+"\n\n")
FreeCAD.Console.PrintMessage("_____setArrondi_____  ")
FreeCAD.Console.PrintError("Actual " + str(setArrondi)+"\n")
FreeCAD.Console.PrintMessage("setArrondi         : set your choice round value"+"\n")
FreeCAD.Console.PrintMessage("                   : if your choice = 0 : the round value is 3 by default "+"\n\n")
FreeCAD.Console.PrintMessage("_____switchResident_____  ")
FreeCAD.Console.PrintError("Actual " + str(switchResident)+"\n")
FreeCAD.Console.PrintMessage("switchResident     : True  1 : the macro stay resident (Type Q to quit)"+"\n")
FreeCAD.Console.PrintMessage("                   : False 0 : the macro is used on run and quit after use"+"\n")
FreeCAD.Console.PrintMessage("\n"+"####Configure end############################################################################################" + "\n")
FreeCAD.Console.PrintMessage("\n"+"####Use######################################################################################################" + "\n")
FreeCAD.Console.PrintMessage("Use : click the first point, click the second point, the data is diplayed"+"\n")
FreeCAD.Console.PrintMessage("    : press the SHIFT button click the point, the Delta is displayed with the coordinate X=0,Y=0,Z=0 to point clicked X, Y, Z"+"\n")
FreeCAD.Console.PrintMessage("    : the first coordinate X=0, Y=0, Z=0 is displayed in red"+"\n")
FreeCAD.Console.PrintMessage("####Use end#######################################################################################################" + "\n\n")
##

Version

Version 0.2 2020-10-23 : adding push the key SHIFT, click one point and the delta value begin 0,0,0 to point clicked, Q for quit the macro
Adding options configurable in preference FC

Version 0.1 2013-11-29 :