Macro CloneConvert/it: Difference between revisions

From FreeCAD Documentation
No edit summary
mNo edit summary
(40 intermediate revisions by 3 users not shown)
Line 1: Line 1:
<languages/>
{{Macro/it|Icon=Macro_CloneConvert |Name=Macro CloneConvert|Name/it=Macro CloneConvert|Description=Crea un clone riposizionato e scalato di un oggetto selezionato.|Author=mario52}}
{{Macro/it
|Name=Macro CloneConvert
|Icon=Macro_CloneConvert.png
|Description={{ColoredText|#ff0000|#ffffff|New version GUI modifyed for the HD dpi (QGridLayout) run only FC version 0.18 and more (PySide2 Qt5)}}<br/><br/>
For the precedent version see [https://gist.githubusercontent.com/mario52a/9f2f2f6144e1307a048f1840ef99300c/raw/0a141260ad8d5f67f0fc18b9b40ef37757c06c65/Macro_CloneConvert.FCMacro Macro_CloneConvert] and install it manually.<br/><br/> Creates a clone or Copy or Compound of the object(s) and the converted in the chosen position and size (inch, mm, m, µm...) or free. The base object is recognized in mm (FreeCAd base).
|Author=mario52
|Version=0.15
|Date=2020-06-06
|FCVersion= 0.18 è piu
|Download=[https://www.freecadweb.org/wiki/images/0/0a/Macro_CloneConvert.png ToolBar Icon]
}}


== Descrizione ==
== Descrizione ==
Crea un clone o una copia dell'oggetto, lo colloca nella posizione indicata e con le dimensioni desiderate (cm, mm, m, um ...) a piacere. L'originale, cioè l'oggetto selezionato, è riconosciuto in mm (secondo il sistema base di FreeCAD)
Crea un clone o una copia dell'oggetto, lo colloca nella posizione indicata e con le dimensioni desiderate (cm, mm, m, um ...) a piacere. L'originale, cioè l'oggetto selezionato, è riconosciuto in mm (secondo il sistema base di FreeCAD)

{{Codeextralink|https://gist.githubusercontent.com/mario52a/9f2f2f6144e1307a048f1840ef99300c/raw/39bc54e90b80053a5af76b0b17694cb53697aebd/Macro_CloneConvert.FCMacro}}


== Utilizzo ==
== Utilizzo ==
Avviare la macro, definire le impostazioni XYZ se è necessario, scegliere "Clone" oppure "Copia", scegliere una unità di conversione, selezionare l'oggetto e poi fare clic su il pulsante {{KEY/it|OK}} per avviare l'operazione.
Avviare la macro, definire le impostazioni XYZ se è necessario, scegliere "Clone" oppure "Copia", scegliere una unità di conversione, selezionare l'oggetto e poi fare clic su il pulsante {{KEY/it|OK}} per avviare l'operazione.


Se non viene inserito alcun valore verrà creata una copia o un clone senza modifiche. Se non è selezionato alcun oggetto il pulsante {{KEY|Ok}} sarà colorato in rosso.
Se non viene inserito alcun valore viene creata una copia o un clone senza modifiche. Se non è selezionato alcun oggetto il pulsante {{KEY|Ok}} è colorato in rosso.


Il valore di '''BoundingBox''', '''Volume''' e '''Surface''' sono indicate nella vista Report, nel caso di oggetti '''Copy''' multiple, il display visualia BoundingBox 0.0.
Il valore di '''BoundingBox''', '''Volume''' e '''Surface''' sono indicate nella vista Report, nel caso di oggetti '''Copy''' multiple, il display visualizza BoundingBox 0.0.




Line 41: Line 54:
<br /><br />
<br /><br />


[[File:Macro CloneConvert_01.png|220px|right|CloneConvert]]
[[File:Macro CloneConvert_01.png|350px|left|CloneConvert]]
* '''Mode'''
* '''Mode'''
* '''Clone :''' One clone of the objet(s) is create
* '''Clone :''' Crea un clone
* '''Copy :''' One copy of the objet(s) is create
* '''Copy :''' Crea una copia
* '''Comp :''' One compound of the objet(s) is create
* '''Comp :''' Crea un composto di oggetto
* '''Increm. :''' incrementing the coordinates data to the original coordinates of the object (Placement, Rotation ...)<br />If this is not checked the Placement begin in coordinates 0,0,0 of FreeCAD<br />In case a compound Placement information is [0,0,0] the Placement begin in the position of object<br />If the real location is away from the base coordinates 0,0,0 use the {{KEY|ValueAt()}} button for the real Placement of the subObject selected Face, Wire, Line ....
* '''Increm. :''' incrementa i dati delle coordinate alle coordinate originali dell'oggetto (Placement, Rotation ...)<br />Se questo non viene attivato il posizionamento inizia alle coordinate 0,0,0 di FreeCAD<br />Nel caso in cui un composto le coordinate di Placement sono [0,0,0], e il posizionamento inizia nella posizione dell'oggetto<br />Se il posizionamento non inizia nella posizione 0,0,0, utilizzare il pulsante {{KEY|ValueAt()}} per ottenere il posizionamento reale dei subObject selezionati Face, Wire, Line ....
* '''Unique :''' Se viene selezionata questa casella con diversi oggetti selezionati, il clone viene creato come un oggetto unico


* '''Coordinates'''
* '''Coordinate'''
* '''{{KEY|...}} :''' This button align the YZ values on the value of X to have the same values ​​XYZ (or manually). Two click reset the coordinates values to 0.0
* '''{{KEY|...}} :''' Questo pulsante forza il valore di Y e Z ai valori di X per avere gli stessi valori ​​XYZ (o manualmente). Due click ripristinano i valori delle coordinate a 0.0
* '''Coordinate X :''' Move the copy to the Coordinate X selected (Base 0,0,0 if Increm. is not checked)
* '''Coordinate X :''' Sposta la copia alla coordinata X selezionata (Base 0,0,0 se Increm. non è attivo)
* '''Coordinate Y :''' Move the copy to the Coordinate Y selected (Base 0,0,0 if Increm. is not checked)
* '''Coordinate Y :''' Sposta la copia alla coordinata Y selezionata (Base 0,0,0 se Increm. non è attivo)
* '''Coordinate Z :''' Move the copy to the Coordinate Z selected (Base 0,0,0 if Increm. is not checked)
* '''Coordinate Z :''' Sposta la copia alla coordinata Z selezionata (Base 0,0,0 se Increm. non è attivo)


* '''Rotation'''
* '''Rotation'''
* '''{{KEY|...}} :''' This button align the Pitch and Roll values on the value of Yaw to have the same values ​​Rotation (or manually)<br />Two click reset the rotations values to 0.0
* '''{{KEY|...}} :''' Questo pulsante forza i valori di beccheggio e rollio sul valore di imbardata per avere lo stesso valore di Rotazione (o manualmente). Due click ripristinano i valori delle rotazioni a 0.0
* '''Yaw (Z ) :''' Rotate the copy to the axis Z (Yaw) (Begin 0 if Increm. is not checked)
* '''Yaw (Z ) :''' Ruota la copia sull'asse Z (Yaw) (Inizia da 0 se Increm. non è attivo)
* '''Pitch ( Y ) :''' Rotate the copy to the axis Y (Pitch) (Begin 0 if Increm. is not checked)
* '''Pitch ( Y ) :''' Ruota la copia sull'asse Y (Pitch) (Inizia da 0 se Increm. non è attivo)
* '''Roll ( X ) :''' Rotate the copy to the axis X (Roll) (Begin 0 if Increm. is not checked)
* '''Roll ( X ) :''' Ruota la copia sull'asse X (Roll) (Inizia da 0 se Increm. non è attivo)


* '''Scale predefined'''
* '''Scale predefined'''
* '''Scale predefined :''' predefined scales in units, km, hm, dam, m, dm, cm, '''mm''', µm, nm, inch, link, foot, yard, perch, chain, furlong, mile, league, nautique or choose a free value in the Scale free field.
* '''Scale predefined :''' le scale predefinite sono km, hm, dam, m, dm, cm, '''mm''', µm, nm, inch, link, foot, yard, perch, chain, furlong, mile, league, nautique, oppure impostare l'unità desiderata nel campo Scale free.


* '''Number copy '''
* '''Number copy '''
* '''Number copy :''' number of copies
* '''Number copy :''' numero di copie


* '''Scale free'''
* '''Scale free'''
* '''{{KEY|...}} :''' This button align the Scales values on the value of Scale X to have the same values ​​XYZ (or manually)<br />Two click reset the scales values to 1.0
* '''{{KEY|...}} :''' Questo pulsante adatta i valori per Y e Z al valore di X per scalare su tutti gli assi con lo stesso valore (o impostare manualmente gli stessi valori). Due click per ripristinare i valori di scale a 1,0
* '''Scale X :''' free scale , if the value is negative '''( -10)''' , the object is scaled '''x 10''' and will be reversed in the X axis, to reduce the shape give a decimal value '''(0,5)'''
* '''Scale X :''' scala a scelta , se il valore è negativo '''( -10)''' , l'oggetto viene ingrandito '''x 10''' e viene invertita la direzione sull'asse X, per ridurre la forma inserire un valore decimale '''(0,5)'''
* '''Scale Y :''' free scale , if the value is negative '''( -10)''' , the object is scaled '''x 10''' and will be reversed in the Y axis, to reduce the shape give a decimal value '''(0,5)'''
* '''Scale Y :''' scala a scelta , se il valore è negativo '''( -10)''' , l'oggetto viene ingrandito '''x 10''' e viene invertita la direzione sull'asse Y, per ridurre la forma inserire un valore decimale '''(0,5)'''
* '''Scale Z :''' free scale , if the value is negative '''( -10)''' , the object is scaled '''x 10''' and will be reversed in the Z axis, to reduce the shape give a decimal value '''(0,5)'''
* '''Scale Z :''' scala a scelta , se il valore è negativo '''( -10)''' , l'oggetto viene ingrandito '''x 10''' e viene invertita la direzione sull'asse Z, per ridurre la forma inserire un valore decimale '''(0,5)'''


* '''{{KEY|ValueAt()}} :''' Give the valueAt() the subObject selected Face, Wire, Line ...<br />This option is useful in case a compound Placement information [0,0,0] and its real location is away from the base coordinates 0,0,0 (gives no provide information about the rotation of the object)
* '''{{KEY|ValueAt()}} :''' Attribuisce il vettore valueAt() dei subObject selezionati Face, Wire, Line ...<br />Questa opzione è utile quando i dati indicati di Placement sono [0,0,0] e la posizione effettiva dell'oggetto non corrisponde alle coordinate di base 0,0,0 (non informazioni sulla rotazione dell'oggetto)
* '''{{KEY|Ok}} :''' the OK button validates and launches the command, if no object is selected the {{KEY|Ok}} button will be coloured in red
* '''{{KEY|OK}} :''' il pulsante OK convalida e lancia il comando, se non è selezionato alcun oggetto il pulsante {{KEY|Ok}} ha il colore rosso
* '''{{KEY|Reset}} :''' the Reset button puts all the values to zero
* '''{{KEY|Reset}} :''' il pulsante Reset azzera tutti i valori
* '''{{KEY|Quit}} :''' the Quit button exit the macro
* '''{{KEY|Quit}} :''' esce dalla macro
{{clear}}
{{clear}}


Line 81: Line 95:
L'icona di Macro_CloneConvert: [[Image:Macro_CloneConvert.png]]
L'icona di Macro_CloneConvert: [[Image:Macro_CloneConvert.png]]


Macro_CloneConvert.FCMacro
'''Macro_CloneConvert.FCMacro'''
<syntaxhighlight>
# -*- coding: utf-8 -*-


Scaricare la macro da Gist [https://gist.github.com/mario52a/9f2f2f6144e1307a048f1840ef99300c Macro_CloneConvert.FCMacro]
# CloneConvert.FCMacro
# Cree un clone ou une copie de l'objet ou des objets selectionne(s) et le met e l'echelle de la grandeur choisie
# utilisation : lancer CloneConvert selectionnez un objet choisissez la grandeur et cliquez sur OK
#
# Creates a clone of one copy the selected object and updates the selected size range
# use: start CloneConvert select an object choose the size and click OK
#


==Revision==
#OS: Windows Vista #OS: Windows 8.1
14/06/2016 ver 0.9 = adding the choice of number of copies and labels optimization
#Word size: 32-bit #Word size of OS: 64-bit
#Version: 0.14.3700 (Git) #Word size of FreeCAD: 32-bit
#Branch: releases/FreeCAD-0-14 #Version: 0.16.5231 (Git)
#Hash: 32f5aae0a64333ec8d5d160dbc46e690510c8fe1 #Build type: Release
#Python version: 2.6.2 #Branch: master
#Qt version: 4.5.2 #Hash: 945638c405766faca0e5f4c1611c00151c88a2ff
#Coin version: 3.1.0 #Python version: 2.7.8
#SoQt version: 1.4.1 #Qt version: 4.8.6
#OCC version: 6.5.1 #Coin version: 4.0.0a
# #OCC version: 6.8.0.oce-0.17
#


# ver 0.3 31/07/2014 PyQt4 + PySide
06/06/2020 ver 0.15 = icon
# ver 0.4 25/07/2015 ajout rotation
# ver 0.5 26/07/2015 correction rotation plusieurs objets Copy
# ver 0.6 26/01/2016 correction placement avec plusieurs objets Copy
# ver 0.7 30/01/2016 reecriture du code avec Placement et ajout Increment et de boutons
# ver 0.8 31/01/2016 clique 2 fois pour mettre les valeurs a zero (en cas de modifications reinitialisait )
# ver 0.8 14/06/2016 ajout du bouton nombre de copies et optimisation des labels


20/05/2020 ver 0.14 = grid layout PySide2 Qt5
__title__ = "CloneConvert"
__author__ = "mario52"
__url__ = "http://www.freecadweb.org/index-fr.html"
__version__ = "00.09"
__date__ = "14/06/2016"


15/09/2019 ver 0.13 = replace the grec sign micro to "um", replace all "_translate("MainWindow", "mm", None)" to "mm" and comment line "text.encode('utf-8')" cause not work with FC 0.19 18.213
__Comment__ = "This macro creates Clone or Copy or Compound of object(s)"
__Web__ = "http://www.freecadweb.org/"
__Wiki__ = "http://www.freecadweb.org/wiki/index.php?title=Macro_CloneConvert"
__Icon__ = "/usr/lib/freecad/Mod/plugins/icons/Macro_CloneConvert.png"
__IconW__ = "C:/Users/User Name/AppData/Roaming/FreeCAD/Macro_CloneConvert.png"
__Help__ = "start the macro and follow the instructions"
__Status__ = "stable"
__Requires__ = "Alls Freecad"
__Communication__ = "http://www.freecadweb.org/wiki/index.php?title=User:Mario52"


01/06/2019 ver 0.12 = adapted for 0.19 et correction "Copy:legacy=True" and ShapeColor .....


30/03/2018 ver 0.11 = odd checkBox, if multi selection the clone are object unique or object separate
try:
import PyQt4 # PyQt4
from PyQt4 import QtCore, QtGui # PyQt4
# print "PyQt4"


07/06/2017 ver 0.10 = replace Draft...Copy to Part..Shape cause section Copy : not draw copy scaled of object but copy not scaled ??
except Exception:
import PySide # PySide
from PySide import QtCore, QtGui # PySide
# print "PySide"


import Draft, Part, FreeCAD, math, PartGui, FreeCADGui
from math import sqrt, pi, sin, cos, asin
from FreeCAD import Base
from decimal import *
from Draft import *
from FreeCAD import Vector, Rotation, Placement, Console
try:
_fromUtf8 = QtCore.QString.fromUtf8
except AttributeError:
def _fromUtf8(s):
return s
try:
_encoding = QtGui.QApplication.UnicodeUTF8
def _translate(context, text, disambig):
return QtGui.QApplication.translate(context, text, disambig, _encoding)
except AttributeError:
def _translate(context, text, disambig):
return QtGui.QApplication.translate(context, text, disambig)

global surface ; surface = 0.0
global volume_ ; volume_ = 0.0
global boundBox_ ; boundBox_ = 0.0
global boundBoxLX ; boundBoxLX = 0.0
global boundBoxLY ; boundBoxLY = 0.0
global boundBoxLZ ; boundBoxLZ = 0.0
global boundBox_S ; boundBox_S = ""
global uniteM_X ; uniteM_X = 1.0
global uniteM_Y ; uniteM_Y = 1.0
global uniteM_Z ; uniteM_Z = 1.0
global uniteM ; uniteM = 1.0
global uniteMs ; uniteMs = "mm" # default mm
global placement_X ; placement_X = 0.0
global placement_Y ; placement_Y = 0.0
global placement_Z ; placement_Z = 0.0
global Yaw_Z ; Yaw_Z = 0.0
global Pitch_Y ; Pitch_Y = 0.0
global Roll_X ; Roll_X = 0.0
global copyNumber ; copyNumber = 1

global switchP ; switchP = 0
global switchA ; switchA = 0
global switchS ; switchS = 0

global sel ; sel = ""
global cloneCopy ; cloneCopy = 1
global a ; a = ""
class Ui_MainWindow(object):
def __init__(self, MainWindow):
# path = FreeCAD.ConfigGet("AppHomePath")
global uniteMs
self.window = MainWindow
MainWindow.setObjectName(_fromUtf8("MainWindow"))
MainWindow.resize(230, 549)
MainWindow.setMinimumSize(QtCore.QSize(230, 549))
MainWindow.setMaximumSize(QtCore.QSize(230, 549))
self.centralWidget = QtGui.QWidget(MainWindow)
self.centralWidget.setObjectName(_fromUtf8("centralWidget"))
self.label = QtGui.QLabel(self.centralWidget)
self.label.setGeometry(QtCore.QRect(10, 10, 191, 16))
self.label.setAlignment(QtCore.Qt.AlignCenter)
self.label.setObjectName(_fromUtf8("label"))
self.groupBox = QtGui.QGroupBox(self.centralWidget)
self.groupBox.setGeometry(QtCore.QRect(10, 30, 211, 141))
self.groupBox.setObjectName(_fromUtf8("groupBox"))
self.doubleSpinBox = QtGui.QDoubleSpinBox(self.groupBox)
self.doubleSpinBox.setGeometry(QtCore.QRect(100, 50, 101, 22))
self.doubleSpinBox.setDecimals(7)
self.doubleSpinBox.setMinimum(-10000000.0)
self.doubleSpinBox.setMaximum(10000000.0)
self.doubleSpinBox.setSingleStep(1.0)
self.doubleSpinBox.setProperty("value", 0.0)
self.doubleSpinBox.setObjectName(_fromUtf8("doubleSpinBox"))
self.doubleSpinBox.valueChanged.connect(self.on_doubleSpinBox_valueChanged) #connection doubleSpinBox
self.label_2 = QtGui.QLabel(self.groupBox)
self.label_2.setGeometry(QtCore.QRect(10, 50, 91, 16))
self.label_2.setObjectName(_fromUtf8("label_2"))
self.label_3 = QtGui.QLabel(self.groupBox)
self.label_3.setGeometry(QtCore.QRect(10, 80, 91, 16))
self.label_3.setObjectName(_fromUtf8("label_3"))
self.label_4 = QtGui.QLabel(self.groupBox)
self.label_4.setGeometry(QtCore.QRect(10, 110, 91, 16))
self.label_4.setObjectName(_fromUtf8("label_4"))
self.doubleSpinBox_2 = QtGui.QDoubleSpinBox(self.groupBox)
self.doubleSpinBox_2.setGeometry(QtCore.QRect(100, 80, 101, 22))
self.doubleSpinBox_2.setDecimals(7)
self.doubleSpinBox_2.setMinimum(-10000000.0)
self.doubleSpinBox_2.setMaximum(10000000.0)
self.doubleSpinBox_2.setSingleStep(1.0)
self.doubleSpinBox_2.setProperty("value", 0.0)
self.doubleSpinBox_2.setObjectName(_fromUtf8("doubleSpinBox_2"))
self.doubleSpinBox_2.valueChanged.connect(self.on_doubleSpinBox_2_valueChanged) #connection doubleSpinBox_2
self.doubleSpinBox_3 = QtGui.QDoubleSpinBox(self.groupBox)
self.doubleSpinBox_3.setGeometry(QtCore.QRect(100, 110, 101, 22))
self.doubleSpinBox_3.setDecimals(7)
self.doubleSpinBox_3.setMinimum(-10000000.0)
self.doubleSpinBox_3.setMaximum(10000000.0)
self.doubleSpinBox_3.setSingleStep(1.0)
self.doubleSpinBox_3.setProperty("value", 0.0)
self.doubleSpinBox_3.setObjectName(_fromUtf8("doubleSpinBox_3"))
self.doubleSpinBox_3.valueChanged.connect(self.on_doubleSpinBox_3_valueChanged) #connection doubleSpinBox_3
self.radioButton = QtGui.QRadioButton(self.groupBox)
self.radioButton.setGeometry(QtCore.QRect(10, 20, 51, 20))
self.radioButton.setChecked(True)
self.radioButton.setObjectName(_fromUtf8("radioButton"))
self.radioButton.setToolTip(_translate("MainWindow", "Create a clone of the object(s)", None))
self.radioButton.clicked.connect(self.on_radioButton_clicked) #connection radioButton mode clone
self.radioButton_2 = QtGui.QRadioButton(self.groupBox)
self.radioButton_2.setGeometry(QtCore.QRect(58, 20, 51, 20))
self.radioButton_2.setObjectName(_fromUtf8("radioButton_2"))
self.radioButton_2.setToolTip(_translate("MainWindow", "Create a copy of the object(s)", None))
self.radioButton_2.clicked.connect(self.on_radioButton_2_clicked) #connection radioButton_2 mode copy
self.radioButton_3 = QtGui.QRadioButton(self.groupBox)
self.radioButton_3.setGeometry(QtCore.QRect(105, 20, 51, 20))
self.radioButton_3.setObjectName(_fromUtf8("radioButton_3"))
self.radioButton_3.setToolTip(_translate("MainWindow", "Create a compount of the object(s)", None))
self.radioButton_3.clicked.connect(self.on_radioButton_3_clicked) #connection radioButton_3 mode compount
self.checkBox = QtGui.QCheckBox(self.groupBox)
self.checkBox.setGeometry(QtCore.QRect(155, 20, 61, 20))
self.checkBox.setChecked(True)
self.checkBox.setToolTip(_translate("MainWindow", "Apply incremental changes to object Placement (Defaut)\n"+
"If this is not checked the Placement begin in coordinates 0,0,0 of FreeCAD\n"+
"In case a compound Placement information is [0,0,0] the Placement begin in the position of object\n"+
"If the real location is away from the base coordinates 0,0,0 use the ValueAt() button\n"
"for the real Placement of the subObject selected Face, Wire, Line ....", None))
self.checkBox.setObjectName(_fromUtf8("checkBox"))

self.pushButton_5 = QtGui.QPushButton(self.groupBox)
self.pushButton_5.setGeometry(QtCore.QRect(75, 50, 21, 22))
self.pushButton_5.setObjectName(_fromUtf8("pushButton_5"))
self.pushButton_5.clicked.connect(self.on_pushButton_5_clicked) # connect on def "on_pushButton_5_clicked"

self.groupBox_2 = QtGui.QGroupBox(self.centralWidget)
self.groupBox_2.setGeometry(QtCore.QRect(10,300,101,51))
self.groupBox_2.setObjectName(_fromUtf8("groupBox_2"))
self.comboBox = QtGui.QComboBox(self.groupBox_2)
self.comboBox.setGeometry(QtCore.QRect(10, 20, 81, 22))
self.comboBox.setMinimumContentsLength(0)
self.comboBox.setObjectName(_fromUtf8("comboBox"))
self.comboBox.addItem(_fromUtf8(""))
self.comboBox.addItem(_fromUtf8(""))
self.comboBox.addItem(_fromUtf8(""))
self.comboBox.addItem(_fromUtf8(""))
self.comboBox.addItem(_fromUtf8(""))
self.comboBox.addItem(_fromUtf8(""))
self.comboBox.addItem(_fromUtf8(""))
self.comboBox.addItem(_fromUtf8(""))
self.comboBox.addItem(_fromUtf8(""))
self.comboBox.addItem(_fromUtf8(""))
self.comboBox.addItem(_fromUtf8(""))
self.comboBox.addItem(_fromUtf8(""))
self.comboBox.addItem(_fromUtf8(""))
self.comboBox.addItem(_fromUtf8(""))
self.comboBox.addItem(_fromUtf8(""))
self.comboBox.addItem(_fromUtf8(""))
self.comboBox.addItem(_fromUtf8(""))
self.comboBox.addItem(_fromUtf8(""))
self.comboBox.addItem(_fromUtf8(""))
self.comboBox.setToolTip(_translate("MainWindow",u"Select unit. . .", None))
QtCore.QObject.connect(self.comboBox, QtCore.SIGNAL("currentIndexChanged(QString)"), self.SIGNAL_comboBox_Changed)
self.groupBox_3 = QtGui.QGroupBox(self.centralWidget)
self.groupBox_3.setGeometry(QtCore.QRect(10, 360, 211, 111))
self.groupBox_3.setObjectName(_fromUtf8("groupBox_3"))
self.doubleSpinBox_4 = QtGui.QDoubleSpinBox(self.groupBox_3)
self.doubleSpinBox_4.setGeometry(QtCore.QRect(100, 20, 101, 22))
self.doubleSpinBox_4.setDecimals(7)
self.doubleSpinBox_4.setMinimum(-1000000)
self.doubleSpinBox_4.setMaximum(1000000.0)
self.doubleSpinBox_4.setSingleStep(1.0)
self.doubleSpinBox_4.setProperty("value", 1.0)
self.doubleSpinBox_4.setObjectName(_fromUtf8("doubleSpinBox_4"))
self.doubleSpinBox_4.setToolTip(_translate("MainWindow", "Scale free X multiplied by ...\nIf the value is negative the object result is reverted in X axis", None))
self.doubleSpinBox_4.valueChanged.connect(self.on_doubleSpinBox_4_valueChanged) #connection doubleSpinBox_4
self.doubleSpinBox_5 = QtGui.QDoubleSpinBox(self.groupBox_3)
self.doubleSpinBox_5.setGeometry(QtCore.QRect(100, 50, 101, 22))
self.doubleSpinBox_5.setDecimals(7)
self.doubleSpinBox_5.setMinimum(-1000000)
self.doubleSpinBox_5.setMaximum(1000000.0)
self.doubleSpinBox_5.setSingleStep(1.0)
self.doubleSpinBox_5.setProperty("value", 1.0)
self.doubleSpinBox_5.setObjectName(_fromUtf8("doubleSpinBox_5"))
self.doubleSpinBox_5.setToolTip(_translate("MainWindow", "Scale free Y multiplied by ...\n"+
"If the value is negative the object result is reverted in Y axis", None))
self.doubleSpinBox_5.valueChanged.connect(self.on_doubleSpinBox_5_valueChanged) #connection doubleSpinBox_5
self.doubleSpinBox_6 = QtGui.QDoubleSpinBox(self.groupBox_3)
self.doubleSpinBox_6.setGeometry(QtCore.QRect(100, 80, 101, 22))
self.doubleSpinBox_6.setDecimals(7)
self.doubleSpinBox_6.setMinimum(-1000000)
self.doubleSpinBox_6.setMaximum(1000000.0)
self.doubleSpinBox_6.setSingleStep(1.0)
self.doubleSpinBox_6.setProperty("value", 1.0)
self.doubleSpinBox_6.setObjectName(_fromUtf8("doubleSpinBox_6"))
self.doubleSpinBox_6.setToolTip(_translate("MainWindow", "Scale free Z multiplied by ...\n"+
"If the value is negative the object result is reverted in Z axis", None))
self.doubleSpinBox_6.valueChanged.connect(self.on_doubleSpinBox_6_valueChanged) #connection doubleSpinBox_6
self.label_5 = QtGui.QLabel(self.groupBox_3)
self.label_5.setGeometry(QtCore.QRect(10, 20, 53, 16))
self.label_5.setObjectName(_fromUtf8("label_5"))
self.label_6 = QtGui.QLabel(self.groupBox_3)
self.label_6.setGeometry(QtCore.QRect(10, 50, 53, 16))
self.label_6.setObjectName(_fromUtf8("label_6"))
self.label_7 = QtGui.QLabel(self.groupBox_3)
self.label_7.setGeometry(QtCore.QRect(10, 80, 53, 16))
self.label_7.setObjectName(_fromUtf8("label_7"))
self.pushButton_6 = QtGui.QPushButton(self.centralWidget)
self.pushButton_6.setGeometry(QtCore.QRect(10, 479, 65, 25))
self.pushButton_6.setObjectName(_fromUtf8("pushButton_6"))
self.pushButton_6.clicked.connect(self.on_pushButton_6_clicked) # connect on def "on_pushButton_6_clicked"

self.pushButton = QtGui.QPushButton(self.centralWidget)
self.pushButton.setGeometry(QtCore.QRect(82, 510, 65, 28))
self.pushButton.setObjectName(_fromUtf8("pushButton"))

self.pushButton_1 = QtGui.QPushButton(self.centralWidget)
self.pushButton_1.setGeometry(QtCore.QRect(10, 510, 65, 28))
self.pushButton_1.setObjectName(_fromUtf8("pushButton_1"))
self.pushButton_1.setStyleSheet("background-color: Base")
self.pushButton_1.clicked.connect(self.on_pushButton01_clicked) #connection pushButton01 "OK"
self.pushButton_2 = QtGui.QPushButton(self.centralWidget)
self.pushButton_2.setGeometry(QtCore.QRect(155, 510, 65, 28))
self.pushButton_2.setObjectName(_fromUtf8("pushButton_2"))
self.pushButton_2.clicked.connect(self.on_pushButton02_clicked) #connection pushButton02 "Quitter"
self.pushButton_3 = QtGui.QPushButton(self.groupBox_3)
self.pushButton_3.setGeometry(QtCore.QRect(75, 20, 21, 21))
self.pushButton_3.setToolTip(_fromUtf8("Align the Scale YZ to X"))
self.pushButton_3.setObjectName(_fromUtf8("pushButton_3"))
self.pushButton_3.clicked.connect(self.on_pushButton03_clicked) #connection pushButton03 "..." align YZ to X
self.groupBox_4 = QtGui.QGroupBox(self.centralWidget)
self.groupBox_4.setGeometry(QtCore.QRect(10, 180, 211, 111))
self.groupBox_4.setObjectName(_fromUtf8("groupBox_4"))

self.doubleSpinBox_7 = QtGui.QDoubleSpinBox(self.groupBox_4)
self.doubleSpinBox_7.setGeometry(QtCore.QRect(100, 20, 101, 22))
self.doubleSpinBox_7.setDecimals(7)
self.doubleSpinBox_7.setMinimum(-360.0)
self.doubleSpinBox_7.setMaximum(360.0)
self.doubleSpinBox_7.setObjectName(_fromUtf8("doubleSpinBox_7"))
self.doubleSpinBox_7.setToolTip(_translate("MainWindow", "Rotation of Yaw ( Axis Z )", None))
self.doubleSpinBox_7.valueChanged.connect(self.on_doubleSpinBox_7_valueChanged) #connection doubleSpinBox_7

self.doubleSpinBox_8 = QtGui.QDoubleSpinBox(self.groupBox_4)
self.doubleSpinBox_8.setGeometry(QtCore.QRect(100, 50, 101, 22))
self.doubleSpinBox_8.setDecimals(7)
self.doubleSpinBox_8.setMinimum(-360.0)
self.doubleSpinBox_8.setMaximum(360.0)
self.doubleSpinBox_8.setObjectName(_fromUtf8("doubleSpinBox_8"))
self.doubleSpinBox_8.setToolTip(_translate("MainWindow", "Rotation of Pitch ( Axis Y )", None))
self.doubleSpinBox_8.valueChanged.connect(self.on_doubleSpinBox_8_valueChanged) #connection doubleSpinBox_8

self.doubleSpinBox_9 = QtGui.QDoubleSpinBox(self.groupBox_4)
self.doubleSpinBox_9.setGeometry(QtCore.QRect(100, 80, 101, 22))
self.doubleSpinBox_9.setDecimals(7)
self.doubleSpinBox_9.setMinimum(-360.0)
self.doubleSpinBox_9.setMaximum(360.0)
self.doubleSpinBox_9.setObjectName(_fromUtf8("doubleSpinBox_9"))
self.doubleSpinBox_9.setToolTip(_translate("MainWindow", "Rotation of Roll ( Axis X )", None))
self.doubleSpinBox_9.valueChanged.connect(self.on_doubleSpinBox_9_valueChanged) #connection doubleSpinBox_9

self.groupBox_5 = QtGui.QGroupBox(self.centralWidget)
self.groupBox_5.setGeometry(QtCore.QRect(120,300,101,51))
self.groupBox_5.setObjectName(_fromUtf8("groupBox_5"))
self.SpinBox = QtGui.QSpinBox(self.groupBox_5)
self.SpinBox.setGeometry(QtCore.QRect(10, 20, 81, 22))
self.SpinBox.setMaximum(1000000)
self.SpinBox.setProperty("value", 1)
self.SpinBox.setObjectName(_fromUtf8("SpinBox"))
self.SpinBox.setToolTip(_translate("MainWindow", "Number copy of original", None))
self.SpinBox.valueChanged.connect(self.on_SpinBox_valueChanged) #connection SpinBox
self.label_8 = QtGui.QLabel(self.groupBox_4)
self.label_8.setGeometry(QtCore.QRect(10, 20, 81, 16))
self.label_8.setObjectName(_fromUtf8("label_8"))

self.label_9 = QtGui.QLabel(self.groupBox_4)
self.label_9.setGeometry(QtCore.QRect(10, 50, 81, 16))
self.label_9.setObjectName(_fromUtf8("label_9"))

self.label_10 = QtGui.QLabel(self.groupBox_4)
self.label_10.setGeometry(QtCore.QRect(10, 80, 81, 16))
self.label_10.setObjectName(_fromUtf8("label_10"))

self.pushButton_4 = QtGui.QPushButton(self.groupBox_4)
self.pushButton_4.setGeometry(QtCore.QRect(75, 20, 21, 22))
self.pushButton_4.setObjectName(_fromUtf8("pushButton_4"))
self.pushButton_4.clicked.connect(self.on_pushButton_4_clicked) # connect on def "on_pushButton_4_clicked"

self.pushButton.clicked.connect(self.on_pushButton00_clicked) #connection pushButton00 "Reset"
self.lineEdit = QtGui.QLineEdit(self.centralWidget)
self.lineEdit.setGeometry(QtCore.QRect(83, 481, 136, 20))
self.lineEdit.setObjectName(_fromUtf8("lineEdit"))
self.lineEdit.setText(QtGui.QApplication.translate("Form", " ", None, QtGui.QApplication.UnicodeUTF8))

MainWindow.setCentralWidget(self.centralWidget)
self.retranslateUi(MainWindow)
QtCore.QMetaObject.connectSlotsByName(MainWindow)
def retranslateUi(self, MainWindow):
MainWindow.setWindowTitle(_translate("MainWindow", "CloneConvert", None))
try:
MainWindow.setWindowFlags(PyQt4.QtCore.Qt.WindowStaysOnTopHint) # cette fonction met la fenetre en avant
except Exception:
MainWindow.setWindowFlags(PySide.QtCore.Qt.WindowStaysOnTopHint) # cette fonction met la fenetre en avant
self.label.setText(_translate("MainWindow", "Object converter", None))
self.groupBox.setTitle(_translate("MainWindow", "Mode", None))

self.radioButton.setText(_translate("MainWindow", "Clone", None))
self.radioButton_2.setText(_translate("MainWindow", "Copy", None))
self.radioButton_3.setText(_translate("MainWindow", "Comp.", None))

self.checkBox.setText(_translate("MainWindow", "Increm.", None))

self.pushButton_4.setToolTip(_translate("MainWindow", "Align the YX degrees values to Z value \n Two click reset the rotations values to 0.0", None))
self.pushButton_4.setText(_translate("MainWindow", "...", None))
self.pushButton_5.setToolTip(_translate("MainWindow", "Align the YZ coordinates values to X value \n Two click reset the coordinates values to 0.0", None))
self.pushButton_5.setText(_translate("MainWindow", "...", None))
self.pushButton_3.setToolTip(_translate("MainWindow", "Align the YZ scale values to X scale value \n Two click reset the scales values to 1.0", None))
self.pushButton_3.setText(_translate("MainWindow", "...", None))

self.doubleSpinBox.setToolTip(_translate("MainWindow", "Place the new object to the X coordinate ", None))
self.doubleSpinBox.setSuffix(_translate("MainWindow", " mm", None))
self.doubleSpinBox_2.setToolTip(_translate("MainWindow", "Place the new object to the Y coordinate", None))
self.doubleSpinBox_2.setSuffix(_translate("MainWindow", " mm", None))
self.doubleSpinBox_3.setToolTip(_translate("MainWindow", "Place the new object to the Z coordinate", None))
self.doubleSpinBox_3.setSuffix(_translate("MainWindow", " mm", None))

self.label_2.setText(_translate("MainWindow", "Coordinate X", None))
self.label_3.setText(_translate("MainWindow", "Coordinate Y", None))
self.label_4.setText(_translate("MainWindow", "Coordinate Z", None))

self.groupBox_2.setTitle(_translate("MainWindow", "Scale predefined", None))
self.comboBox.setToolTip(_translate("MainWindow", "Convert your object to . . .", None))
self.comboBox.setCurrentIndex(6)
self.comboBox.setItemText(0, _translate("MainWindow", "km", None)) #km # = 1000000
self.comboBox.setItemText(1, _translate("MainWindow", "hm", None)) #hm # = 100000
self.comboBox.setItemText(2, _translate("MainWindow", "dam", None)) #dam# = 10000
self.comboBox.setItemText(3, _translate("MainWindow", "m", None)) #m # = 1000
self.comboBox.setItemText(4, _translate("MainWindow", "dm", None)) #dm # = 100
self.comboBox.setItemText(5, _translate("MainWindow", "cm", None)) #cm # = 10
self.comboBox.setItemText(6, _translate("MainWindow", "mm", None)) #mm # = 1 #####
self.comboBox.setItemText(7, _translate("MainWindow", "µm", None)) #µm # micro = 0.001
self.comboBox.setItemText(8, _translate("MainWindow", "nm", None)) #nm # nano = 0.000001
self.comboBox.setItemText(9, _translate("MainWindow", "inch", None)) #in # inch pouce = 25.400
self.comboBox.setItemText(10, _translate("MainWindow", "link", None)) #lk # link chainon = 201.168
self.comboBox.setItemText(11, _translate("MainWindow", "foot", None)) #ft # foot pied = 304.800
self.comboBox.setItemText(12, _translate("MainWindow", "yard", None)) #yd # yard verge = 914.400
self.comboBox.setItemText(13, _translate("MainWindow", "perch", None)) #rd # rod ou perch perche = 5029.200
self.comboBox.setItemText(14, _translate("MainWindow", "chain", None)) #ch # chain chaine = 20116.800
self.comboBox.setItemText(15, _translate("MainWindow", "furlong", None)) #fur# furlong = 201168
self.comboBox.setItemText(16, _translate("MainWindow", "mile", None)) #mi # mile = 1609344
self.comboBox.setItemText(17, _translate("MainWindow", "league", None)) #lea# league lieue = 4828032
self.comboBox.setItemText(18, _translate("MainWindow", "nautique", None)) #nmi# mile nautique = 1852000

self.groupBox_3.setTitle(_translate("MainWindow", "Scale free", None))
self.label_5.setText(_translate("MainWindow", "Scale X", None))
self.label_6.setText(_translate("MainWindow", "Scale Y", None))
self.label_7.setText(_translate("MainWindow", "Scale Z", None))

self.pushButton.setToolTip(_translate("MainWindow", "Reset the values", None))
self.pushButton.setText(_translate("MainWindow", "Reset", None))
self.pushButton_1.setToolTip(_translate("MainWindow", "Ok for Convert Copy or Compount", None))
self.pushButton_1.setText(_translate("MainWindow", "Ok", None))
self.pushButton_2.setToolTip(_translate("MainWindow", "Quit the macro", None))
self.pushButton_2.setText(_translate("MainWindow", "Quit", None))

self.pushButton_6.setToolTip(_translate("MainWindow", "Give the valueAt() the subObject selected Face, Wire, Line ...\n"+
"This option is useful in case a compound Placement information [0,0,0]\n"+
"and its real location is away from the base coordinates 0,0,0\n"+
"(gives no provide information about the tilt of the object)", None))
self.pushButton_6.setText(_translate("MainWindow", "ValueAt()", None))

self.groupBox_4.setTitle(_translate("MainWindow", "Rotation", None))
self.groupBox_5.setTitle(_translate("MainWindow", "Number copy", None))
self.label_8.setText(_translate("MainWindow", "Yaw ( Z )", None))
self.label_9.setText(_translate("MainWindow", "Pitch ( Y )", None))
self.label_10.setText(_translate("MainWindow", "Roll ( X )", None))
self.doubleSpinBox_7.setSuffix(_translate("MainWindow", " Deg", None))
self.doubleSpinBox_8.setSuffix(_translate("MainWindow", " Deg", None))
self.doubleSpinBox_9.setSuffix(_translate("MainWindow", " Deg", None))

def SIGNAL_comboBox_Changed(self,text):
global uniteM_X
global uniteM_Y
global uniteM_Z
global uniteM
global uniteMs
try:
text = unicode(text, 'ISO-8859-1').encode('UTF-8') # PyQt4
except Exception:
text = text.encode('utf-8') # PySide
if text == "km": # = 1000000
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 1000000.0
uniteMs= "km"
elif text == "hm": # = 100000
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 100000.0
uniteMs= "hm"
elif text == "dam": # = 10000
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 10000.0
uniteMs= "dam"
elif text == "m": # = 1000
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 1000.0
uniteMs= "m"
elif text == "dm": # = 100
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 100.0
uniteMs= "dm"
elif text == "cm": # = 10
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 10.0
uniteMs= "cm"
elif text == "mm": # = 1 ###############################
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 1.0
uniteMs= "mm"
elif text == "µm": # = 1000
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 1.0/1000.0
uniteMs= u"µm"
elif text == "nm": # = 1000000
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 1.0/1000000.0
uniteMs= u"nm"
elif text == "inch": # inch = 25.400
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 25.400
uniteMs= "in"
elif text == "link": # link = 201.168
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 201.168
uniteMs= "lk"
elif text == "foot": # foot = 304.800
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 304.800
uniteMs= "ft"
elif text == "yard": # yard = 914.400
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 914.400
uniteMs= "yd"
elif text == "perch": #rd # rod perche = 5029.200
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 5029.200
uniteMs= "rd"
elif text == "chain": # chain = 20116.800
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 20116.800
uniteMs= "ch"
elif text == "furlong": # furlong= 201168
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 201168
uniteMs= "fur"
elif text == "mile": # mile = 1609344
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 1609344
uniteMs= "mi"
elif text == "league": # league = 4828032
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 4828032
uniteMs= "lea"
elif text == "nautique": # nautique = 1852000
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 1852000
uniteMs= "nmi"
else: # mm = 1
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 1.0
uniteMs= "mm"
self.doubleSpinBox_4.setProperty("value", uniteM_X)
self.doubleSpinBox_5.setProperty("value", uniteM_Y)
self.doubleSpinBox_6.setProperty("value", uniteM_Z)
def on_radioButton_clicked(self): # if checked then mode clone
global cloneCopy
cloneCopy = 1

def on_radioButton_2_clicked(self): # if checked then mode copy
global cloneCopy
cloneCopy = 0

def on_radioButton_3_clicked(self): # if checked then mode compount
global cloneCopy
cloneCopy = 2
def on_doubleSpinBox_valueChanged(self,value): # doubleSpinbox X
global placement_X
global switchP
switchP = 0
placement_X = value
def on_doubleSpinBox_2_valueChanged(self,value): # doubleSpinbox Y
global placement_Y
global switchP
switchP = 0
placement_Y = value
def on_doubleSpinBox_3_valueChanged(self,value): # doubleSpinbox Z
global placement_Z
global switchP
switchP = 0
placement_Z = value
def on_doubleSpinBox_4_valueChanged(self,value): # doubleSpinbox free X
global uniteM_X
global switchS
switchS = 0
uniteM_X = value
if uniteM_X == 0:
uniteM_X = 1
def on_doubleSpinBox_5_valueChanged(self,value): # doubleSpinbox free Y
global uniteM_Y
global switchS
switchS = 0
uniteM_Y = value
if uniteM_Y == 0:
uniteM_Y = 1
def on_doubleSpinBox_6_valueChanged(self,value): # doubleSpinbox free Z
global uniteM_Z
global switchS
switchS = 0
uniteM_Z = value
if uniteM_Z == 0:
uniteM_Z = 1
def on_doubleSpinBox_7_valueChanged(self,value): # doubleSpinBox_7 Yaw ( Z )
global Yaw_Z
global switchA
switchA = 0
Yaw_Z = value

def on_doubleSpinBox_8_valueChanged(self,value): # doubleSpinBox_8 Pitch ( Y )
global Pitch_Y
global switchA
switchA = 0
Pitch_Y = value

def on_doubleSpinBox_9_valueChanged(self,value): # doubleSpinBox_9 Roll ( X )
global Roll_X
global switchA
switchA = 0
Roll_X = value

def on_SpinBox_valueChanged(self,value): # SpinBox Number copy
global copyNumber
copyNumber = value

def on_pushButton_5_clicked(self): # Bouton ... (align) placement
global placement_X
global placement_Y
global placement_Z
global switchP

if switchP == 0:
placement_Y = placement_Z = placement_X
switchP = 1
else:
placement_Y = placement_Z = placement_X = 0.0
switchP = 0

self.doubleSpinBox.setProperty("value", placement_X)
self.doubleSpinBox_2.setProperty("value", placement_Y)
self.doubleSpinBox_3.setProperty("value", placement_Z)

def on_pushButton_6_clicked(self): # valueAt() placement detected
try:
sel = FreeCADGui.Selection.getSelection()
App.Console.PrintMessage(str(sel[0].Placement) +"\r\n")
selectionObjects = FreeCADGui.Selection.getSelectionEx() # Select an object or sub object getSelectionEx
edge = selectionObjects[0].SubObjects[0]
try:
self.lineEdit.setText(str(edge.valueAt(0,0))) # face
self.pushButton_6.setText(_translate("MainWindow", "ValueAt(0,0)", None))
App.Console.PrintMessage(str(edge.valueAt(0,0)) +"\r\n")
except Exception:
self.lineEdit.setText(str(edge.valueAt(0))) # fil
self.pushButton_6.setText(_translate("MainWindow", "ValueAt(0)", None))
App.Console.PrintMessage(str(edge.valueAt(0)) +"\r\n")
except Exception:
self.pushButton_6.setText(_translate("MainWindow", "ValueAt()", None))
App.Console.PrintError("Select one subObject, Face, Wire, Line ..."+"\r\n")
App.Console.PrintMessage("____________________________________"+"\r\n")
def on_pushButton_4_clicked(self): # Bouton ... (align) rotation
global Yaw_Z
global Pitch_Y
global Roll_X
global switchA

if switchA == 0:
Pitch_Y = Roll_X = Yaw_Z
switchA = 1
else:
Pitch_Y = Roll_X = Yaw_Z = 0.0
switchA = 0

self.doubleSpinBox_7.setProperty("value", Yaw_Z)
self.doubleSpinBox_8.setProperty("value", Pitch_Y)
self.doubleSpinBox_9.setProperty("value", Roll_X)

def on_pushButton03_clicked(self): # Bouton ... (align) uniteM
global uniteM_X
global uniteM_Y
global uniteM_Z
global switchS
global uniteM
global uniteMs

if switchS == 0:
uniteM_Y = uniteM_Z = uniteM_X
switchS = 1
else:
uniteM_Y = uniteM_Z = uniteM_X = 1.0
switchS = 0

self.doubleSpinBox_4.setProperty("value", uniteM_X)
self.doubleSpinBox_5.setProperty("value", uniteM_Y)
self.doubleSpinBox_6.setProperty("value", uniteM_Z)
def on_pushButton00_clicked(self): # Bouton Reset
global sel
global uniteM_X
global uniteM_Y
global uniteM_Z
global uniteM
global uniteMs
global placement_X
global placement_Y
global placement_Z
global cloneCopy
global Yaw_Z
global Pitch_Y
global Roll_X
global copyNumber
sel = ""
self.pushButton_1.setToolTip(_translate("MainWindow", "Ok for Convert or copy", None))
self.pushButton_1.setStyleSheet("background-color: Base")
self.radioButton.setChecked(True)
cloneCopy = 1
self.comboBox.setCurrentIndex(6)
self.doubleSpinBox.setProperty("value", 0.0) # coordinates
self.doubleSpinBox_2.setProperty("value", 0.0)
self.doubleSpinBox_3.setProperty("value", 0.0)
self.checkBox.setChecked(True)

placement_X = placement_Y = placement_Z = 0.0
self.doubleSpinBox_4.setProperty("value", 1.0) # scale
self.doubleSpinBox_5.setProperty("value", 1.0)
self.doubleSpinBox_6.setProperty("value", 1.0)
self.doubleSpinBox_7.setProperty("value", 0.0) # angles
self.doubleSpinBox_8.setProperty("value", 0.0)
self.doubleSpinBox_9.setProperty("value", 0.0)

self.SpinBox.setProperty("value", 1) # number copy
copyNumber = 1

uniteM = uniteM_X = uniteM_Y = uniteM_Z = 1.0
uniteMs= "mm"
uniteM = 1
self.lineEdit.setText("")
def on_pushButton01_clicked(self): # Bouton OK
global sel
global surface
global volume_
global boundBox
global boundBoxLX
global boundBoxLY
global boundBoxLZ
global boundBox_S
global uniteM_X
global uniteM_Y
global uniteM_Z
global uniteM
global uniteMs
global placement_X
global placement_Y
global placement_Z
global sel
global Yaw_Z
global Pitch_Y
global Roll_X
global copyNumber
#### Chrono begin ######################################################################### chrono begin
import time #### chrono begin
depart = time.clock() #### chrono begin
#### Chrono begin ######################################################################### chrono begin

sel = FreeCADGui.Selection.getSelection()
if len(sel) != 0:
self.pushButton_1.setToolTip(_translate("MainWindow", "Ok for Convert or copy", None))
self.pushButton_1.setStyleSheet("background-color: Base")
# boundinbox (dimensions hors tout)
try:
boundBox_ = sel[0].Shape.BoundBox # pour 1 seul objet, (le premier)
boundBoxLX = boundBox_.XLength
boundBoxLY = boundBox_.YLength
boundBoxLZ = boundBox_.ZLength
except:
boundBox_ = 0.0
boundBoxLX = 0.0
boundBoxLY = 0.0
boundBoxLZ = 0.0
boundBox_S = ""
# volume de tous les objets
volume_ = 0.0
try:
for i in range(len(sel)):
volume_ += sel[i].Shape.Volume
except:
volume_ = 0.0
# surface de tous les objets
surface = 0.0
try:
for i in range(len(sel)):
surface += sel[i].Shape.Area
except:
surface = 0.0
boundBox_S = "[X: "+str(boundBoxLX)+" mm] x [Y: "+str(boundBoxLY)+" mm] x [Z:"+str(boundBoxLZ)+" mm]"
App.Console.PrintMessage("Original boundBox : "+boundBox_S+"\r\n")
App.Console.PrintMessage("Original volume_ : "+str(volume_)+" mm3 ("+str(len(sel))+" element(s))"+"\r\n")
App.Console.PrintMessage("Original surface : "+str(surface)+" mm2 ("+str(len(sel))+" element(s))"+"\r\n")
App.Console.PrintMessage("- - - - - - - - - -"+"\r\n")
try:
obj = comptName = ""

for copies in range(1,copyNumber+1): ##### Boucle copies Debut ###########################
if copyNumber > 1:
comptName = str(copies)

if cloneCopy == 1: # clone ok
import Draft
mess = "Clone"
obj=Draft.clone(sel)
obj.Scale = (uniteM_X, uniteM_Y, uniteM_Z)
if self.checkBox.isChecked(): # if checkbox is checked then .... increment
obj.Placement=App.Placement(App.Vector(placement_X,placement_Y,placement_Z), App.Rotation(Yaw_Z,Pitch_Y,Roll_X), App.Vector(0,0,0)).multiply(App.activeDocument().getObject(obj.Name).Placement) # increment
else:
obj.Placement=App.Placement(App.Vector(placement_X,placement_Y,placement_Z), App.Rotation(Yaw_Z,Pitch_Y,Roll_X), App.Vector(0,0,0))
oL = obj.Label[:5] + " " + comptName + " " + obj.Label[6:]
obj.Label = oL
if cloneCopy == 0: # copy ok
import Draft
mess = "Copy "
for i in range(len(sel)):
obj = Draft.scale(sel[i],delta=App.Vector(uniteM_X, uniteM_Y, uniteM_Z),center=App.Vector(0,0,0),copy=True,legacy=True)
if self.checkBox.isChecked(): # if checkbox is checked then .... increment
obj.Placement=App.Placement(App.Vector(placement_X,placement_Y,placement_Z), App.Rotation(Yaw_Z,Pitch_Y,Roll_X), App.Vector(0,0,0)).multiply(App.activeDocument().getObject(obj.Name).Placement) # increment
else:
obj.Placement=App.Placement(App.Vector(placement_X,placement_Y,placement_Z), App.Rotation(Yaw_Z,Pitch_Y,Roll_X), App.Vector(0,0,0))
obj.Label = "Copy " + comptName + " of " + obj.Label
if cloneCopy == 2: # compound ok
import Draft
mess = "Compount "
liste = []
########################################################################################################################
# objori = Draft.makeBlock(Gui.Selection.getSelection()) # create Block other method compound
# obj = Draft.scale([objori],delta=App.Vector(uniteM_X, uniteM_Y, uniteM_Z),center=App.Vector(0,0,0))
# App.activeDocument().removeObject(objori.Name)
########################################################################################################################
#######################################################################################################################
objori = App.activeDocument().addObject("Part::Compound","Compound") # create method compound
for i in range(len(sel)):
objori.Links += App.activeDocument().getObject(sel[i].Name),
liste.append(sel[i].Name)
obj = Draft.scale([objori],delta=App.Vector(uniteM_X, uniteM_Y, uniteM_Z),center=App.Vector(0,0,0))
#######################################################################################################################
# try: # optional delette the original objects
# App.activeDocument().removeObject(objori.Name)
# for i in liste:
# App.activeDocument().removeObject(i)
# except:
# None
if self.checkBox.isChecked(): # if checkbox is checked then .... increment
obj.Placement=App.Placement(App.Vector(placement_X,placement_Y,placement_Z), App.Rotation(Yaw_Z,Pitch_Y,Roll_X), App.Vector(0,0,0)).multiply(App.activeDocument().getObject(obj.Name).Placement) # increment
else:
obj.Placement=App.Placement(App.Vector(placement_X,placement_Y,placement_Z), App.Rotation(Yaw_Z,Pitch_Y,Roll_X), App.Vector(0,0,0))
obj.Label = "Compount " + comptName + " of " + obj.Label
try:
objori.Label = "Ori " + obj.Label # renamme the original object
except Exception:
None
##### Boucle copies Fin ###########################

FreeCAD.ActiveDocument.recompute()
# print "[ ",placement_X," ",placement_Y," ",placement_Z," ] [ ",Yaw_Z," ",Pitch_Y," ",Roll_X," ]"
# boundinbox (dimensions hors tout)
try:
boundBox_ = obj.Shape.BoundBox
boundBoxLX = boundBox_.XLength
boundBoxLY = boundBox_.YLength
boundBoxLZ = boundBox_.ZLength
except:
boundBox_ = 0.0
boundBoxLX = 0.0
boundBoxLY = 0.0
boundBoxLZ = 0.0
# volume
volume_ = 0.0
try:
volume_ = obj.Shape.Volume
except:
for i in range(len(obj)):
volume_ += obj[i].Shape.Volume
# surface
surface = 0.0
try:
surface = obj.Shape.Area
except:
for i in range(len(obj)):
surface += obj[i].Shape.Area
App.Console.PrintMessage(obj.Label+"\r\n")
App.Console.PrintMessage("Convert mm in ' "+uniteMs+" ' (1 "+uniteMs+" = "+str(uniteM)+" mm)"+"\r\n")
App.Console.PrintMessage(mess + " boundBox_X : "+str(boundBoxLX)+" mm"+"\r\n")
App.Console.PrintMessage(mess + " boundBox_Y : "+str(boundBoxLY)+" mm"+"\r\n")
App.Console.PrintMessage(mess + " boundBox_Z : "+str(boundBoxLZ)+" mm"+"\r\n")
App.Console.PrintMessage(mess + " volume : "+str(volume_)+" mm3 ("+str(len(sel))+" element(s))"+"\r\n")#
App.Console.PrintMessage(mess + " surface : "+str(surface)+" mm2 ("+str(len(sel))+" element(s))"+"\r\n")#
#### Chrono end ########################################################################### chrono end
arrivee = time.clock() #### chrono end
App.Console.PrintMessage("Time : "+str("%.2f" % ((arrivee - depart)/60))+" min"+"\r\n")#### chrono end
#### Chrono end ########################################################################### chrono end
App.Console.PrintMessage("___________________"+"\r\n")
self.pushButton_1.setStyleSheet("background-color: green")

except Exception:
FreeCAD.Console.PrintError("Error interne"+"\r\n")
else:
self.pushButton_1.setStyleSheet("background-color: red")#red
self.pushButton_1.setToolTip(_translate("MainWindow", "Not object selected for Convert or copy", None))

FreeCAD.Console.PrintError("Select an object"+"\r\n") #App.Console.PrintMessage
sel = ""

def on_pushButton02_clicked(self): # Bouton Quitter
App.Console.PrintMessage("End CloneConvert\r\n")
self.window.hide()
sel = FreeCADGui.Selection.getSelection()
MainWindow = QtGui.QMainWindow()
ui = Ui_MainWindow(MainWindow)

MainWindow.show()


</syntaxhighlight>
==Revision==
14/06/2016 ver 0.9 = adding the choice of number of copies and labels optimization
14/06/2016 ver 0.9 = adding the choice of number of copies and labels optimization


Line 1,044: Line 131:


09/05/2014 ver. 0.2 = adding function "Copy"
09/05/2014 ver. 0.2 = adding function "Copy"
<languages/>

Revision as of 17:45, 6 June 2020

Other languages:

Macro CloneConvert

Descrizione
New version GUI modifyed for the HD dpi (QGridLayout) run only FC version 0.18 and more (PySide2 Qt5)

For the precedent version see Macro_CloneConvert and install it manually.

Creates a clone or Copy or Compound of the object(s) and the converted in the chosen position and size (inch, mm, m, µm...) or free. The base object is recognized in mm (FreeCAd base).

Versione macro: 0.15
Ultima modifica: 2020-06-06
Versione FreeCAD: 0.18 è piu
Download: ToolBar Icon
Autore: mario52

Autore
mario52
Download
ToolBar Icon
Link
Versione macro
0.15
Data ultima modifica
2020-06-06
Versioni di FreeCAD
0.18 è piu
Scorciatoia
Nessuna
Vedere anche
Nessuno

Descrizione

Crea un clone o una copia dell'oggetto, lo colloca nella posizione indicata e con le dimensioni desiderate (cm, mm, m, um ...) a piacere. L'originale, cioè l'oggetto selezionato, è riconosciuto in mm (secondo il sistema base di FreeCAD)

Temporary code for external macro link. Do not use this code. This code is used exclusively by Addon Manager. Link for optional manual installation: Macro


# This code is copied instead of the original macro code
# to guide the user to the online download page.
# Use it if the code of the macro is larger than 64 KB and cannot be included in the wiki
# or if the RAW code URL is somewhere else in the wiki.

from PySide import QtGui, QtCore

diag = QtGui.QMessageBox(QtGui.QMessageBox.Information,
    "Information",
    "This macro must be downloaded from this link\n"
    "\n"
    "https://gist.githubusercontent.com/mario52a/9f2f2f6144e1307a048f1840ef99300c/raw/39bc54e90b80053a5af76b0b17694cb53697aebd/Macro_CloneConvert.FCMacro" + "\n"
    "\n"
    "Quit this window to access the download page")

diag.setWindowFlags(QtCore.Qt.WindowStaysOnTopHint)
diag.setWindowModality(QtCore.Qt.ApplicationModal)
diag.exec_()

import webbrowser 
webbrowser.open("https://gist.githubusercontent.com/mario52a/9f2f2f6144e1307a048f1840ef99300c/raw/39bc54e90b80053a5af76b0b17694cb53697aebd/Macro_CloneConvert.FCMacro")


Utilizzo

Avviare la macro, definire le impostazioni XYZ se è necessario, scegliere "Clone" oppure "Copia", scegliere una unità di conversione, selezionare l'oggetto e poi fare clic su il pulsante Template:KEY/it per avviare l'operazione.

Se non viene inserito alcun valore viene creata una copia o un clone senza modifiche. Se non è selezionato alcun oggetto il pulsante Ok è colorato in rosso.

Il valore di BoundingBox, Volume e Surface sono indicate nella vista Report, nel caso di oggetti Copy multiple, il display visualizza BoundingBox 0.0.


L'unità di base e il mm. L'originale viene quindi considerato come un oggetto in cui l'unità di misura è il mm.

Esempio di conversione di uno cubo avente il lato di 1 mm in un cubo avente lato 25,4 mm:

Selezionare nel comboBox l'unità inch, 1 inch = 25.4 mm , notare che il valore nei campi "Scale free" si adeguano automaticamente a 25.4 che corrisponde appunto a 1 pollice (per impostare scalature differenti secondo gli assi, i valori ​​in "Scale-free" possono essere modificati individualmente). Cliccare sul pulsante OK. Il cubo clone creato in questo modo ha le dimensioni di 25,4 mm

Operazione inversa :

Per convertire un oggetto, ad esempio un cubo di 25,4 mm (1 inch) in un cubo di 1mm x 1mm x 1mm, utilizzare la formula 1 / 25,4 = 0,0393700 e inserire il valore 0,0393700 (con la virgola) nel campo Scale X, Y e Z.

Per un cubo di 5mm, fare 5 / 25,4 = 0,1968503e inserire il valore 0,1968503 (con la virgola) nel campo Scale X, Y e Z.

150% = 1,50 nel campo "Scale free"
104% = 1,04 nel campo "Scale free"

Operazione inversa:

Per convertire un oggetto, ad esempio un cubo di 25,4 mm (1 inch) in un cubo di 1mm x 1mm x 1mm, utilizzare la formula 1 / 25,4 = 0,0393700 e inserire il valore 0,0393700 (con la virgola) nel campo Scale X, Y e Z.

Per un cubo di 5mm, fare 5 / 25,4 = 0,1968503e inserire il valore 0,1968503 (con la virgola) nel campo Scale X, Y e Z.

50% = 0,50 nel campo "Scale free"
4% = 0,04 nel campo "Scale free"

Le unita predefinite sono: km, hm, dam, m, dm, cm, mm, µm, nm, inch, link, foot, yard, perch, chain, furlong, mile, league, nautique.

CloneConvert
CloneConvert
  • Mode
  • Clone : Crea un clone
  • Copy  : Crea una copia
  • Comp  : Crea un composto di oggetto
  • Increm. : incrementa i dati delle coordinate alle coordinate originali dell'oggetto (Placement, Rotation ...)
    Se questo non viene attivato il posizionamento inizia alle coordinate 0,0,0 di FreeCAD
    Nel caso in cui un composto le coordinate di Placement sono [0,0,0], e il posizionamento inizia nella posizione dell'oggetto
    Se il posizionamento non inizia nella posizione 0,0,0, utilizzare il pulsante ValueAt() per ottenere il posizionamento reale dei subObject selezionati Face, Wire, Line ....
  • Unique  : Se viene selezionata questa casella con diversi oggetti selezionati, il clone viene creato come un oggetto unico
  • Coordinate
  • ... : Questo pulsante forza il valore di Y e Z ai valori di X per avere gli stessi valori ​​XYZ (o manualmente). Due click ripristinano i valori delle coordinate a 0.0
  • Coordinate X : Sposta la copia alla coordinata X selezionata (Base 0,0,0 se Increm. non è attivo)
  • Coordinate Y : Sposta la copia alla coordinata Y selezionata (Base 0,0,0 se Increm. non è attivo)
  • Coordinate Z : Sposta la copia alla coordinata Z selezionata (Base 0,0,0 se Increm. non è attivo)
  • Rotation
  • ... : Questo pulsante forza i valori di beccheggio e rollio sul valore di imbardata per avere lo stesso valore di Rotazione (o manualmente). Due click ripristinano i valori delle rotazioni a 0.0
  • Yaw (Z )  : Ruota la copia sull'asse Z (Yaw) (Inizia da 0 se Increm. non è attivo)
  • Pitch ( Y ) : Ruota la copia sull'asse Y (Pitch) (Inizia da 0 se Increm. non è attivo)
  • Roll ( X )  : Ruota la copia sull'asse X (Roll) (Inizia da 0 se Increm. non è attivo)
  • Scale predefined
  • Scale predefined : le scale predefinite sono km, hm, dam, m, dm, cm, mm, µm, nm, inch, link, foot, yard, perch, chain, furlong, mile, league, nautique, oppure impostare l'unità desiderata nel campo Scale free.
  • Number copy
  • Number copy : numero di copie
  • Scale free
  • ... : Questo pulsante adatta i valori per Y e Z al valore di X per scalare su tutti gli assi con lo stesso valore (o impostare manualmente gli stessi valori). Due click per ripristinare i valori di scale a 1,0
  • Scale X : scala a scelta , se il valore è negativo ( -10) , l'oggetto viene ingrandito x 10 e viene invertita la direzione sull'asse X, per ridurre la forma inserire un valore decimale (0,5)
  • Scale Y : scala a scelta , se il valore è negativo ( -10) , l'oggetto viene ingrandito x 10 e viene invertita la direzione sull'asse Y, per ridurre la forma inserire un valore decimale (0,5)
  • Scale Z : scala a scelta , se il valore è negativo ( -10) , l'oggetto viene ingrandito x 10 e viene invertita la direzione sull'asse Z, per ridurre la forma inserire un valore decimale (0,5)
  • ValueAt() : Attribuisce il vettore valueAt() dei subObject selezionati Face, Wire, Line ...
    Questa opzione è utile quando i dati indicati di Placement sono [0,0,0] e la posizione effettiva dell'oggetto non corrisponde alle coordinate di base 0,0,0 (non dà informazioni sulla rotazione dell'oggetto)
  • OK : il pulsante OK convalida e lancia il comando, se non è selezionato alcun oggetto il pulsante Ok ha il colore rosso
  • Reset : il pulsante Reset azzera tutti i valori
  • Quit : esce dalla macro

Script

L'icona di Macro_CloneConvert:

Macro_CloneConvert.FCMacro

Scaricare la macro da Gist Macro_CloneConvert.FCMacro

Revision

14/06/2016 ver 0.9 = adding the choice of number of copies and labels optimization

06/06/2020 ver 0.15 = icon

20/05/2020 ver 0.14 = grid layout PySide2 Qt5

15/09/2019 ver 0.13 = replace the grec sign micro to "um", replace all "_translate("MainWindow", "mm", None)" to "mm" and comment line "text.encode('utf-8')" cause not work with FC 0.19 18.213

01/06/2019 ver 0.12 = adapted for 0.19 et correction "Copy:legacy=True" and ShapeColor .....

30/03/2018 ver 0.11 = odd checkBox, if multi selection the clone are object unique or object separate

07/06/2017 ver 0.10 = replace Draft...Copy to Part..Shape cause section Copy : not draw copy scaled of object but copy not scaled ??

14/06/2016 ver 0.9 = adding the choice of number of copies and labels optimization

31/01/2016 ver 0.8 = modify the buttons reset section for two click for reset (in case modification the value)

30/01/2016 ver 0.7 = rewriting code with Placement and Increment and adding buttons Compound, Increment, ValueAt(),

26/01/2016 ver 0.6 = correction placement with many objets Copy

26/07/2015 ver 0.5 = correction rotate many objects Function Copy

25/07/2015 ver 0.4 = adding rotation

11/08/2014 replace "AttributeError" to "Exception"

02/07/2014 ver. 0.3 = modified to operate PyQt4 and PySide

09/05/2014 ver. 0.2 = adding function "Copy"