# Macro CloneConvert

32px Macro CloneConvert

Description
Creates a clone of the object and the converted in the chosen position and size (inch, mm, m, µm...).

Author
mario52
None
Macro Version
1.0
None
None
Default shortcut
None
None

## Description

Creates a clone or copy of the object and the converted in the chosen position and size (inch, mm, m, µm...) or free. The base object is recognized in mm (FreeCAd base)

## Uses

Run the macro, the XYZ settings, choose "Clone" or "Copy" a unit or one value of choice select your object, and click Ok button.

If no value is entered a copy or clone will be created without modification. If no object is selected the Ok button will be colored in red.

The value of the BoundingBox, Volume and Surface is diplayed in the Report view, in the case of Copy multiple object, the display will show BoundingBox 0.0.

The base is the mm example with a 1 mm cube of side :

Select in the comboBox inch, 1 inch = 25.4 mm , the fields "Scale free" automatically adjusts to 25.4 (the values ​​in "Scale-free" can be changed separately). Click Ok button, the clone created will have 25,4 mm x 25,4 mm x 25,4 mm

150% = 1,50 in the "Scale free" fields

104% = 1,04 in the "Scale free" fields

Inverse operation :

If you want to reduce an object ex: a cube 25.4 mm (1 inch) in cube 1 mm sides, use the following formula, 1 / 25.4 = 0.0393700 and enter the value 0,0393700 (with comma) in the Scale field XY and Z.

In a cube of 5 mm, made​​ 5 / 25.4 = 0.1968503 and enter the value 0,1968503 (with comma) in the Scale field XY and Z.

50% = 0,50 in the "Scale free" fields

4% = 0,04 in the "Scale free" fields

Predefined units are :

km, hm, dam, m, dm, cm, mm, µm, nm, inch, link, foot, yard, perch, chain, furlong, mile, league, nautique.

• Mode
• Clone : One clone of the objet(s) is create
• Copy : One copy of the objet(s) is create
• Comp : One compound of the objet(s) is create
• Increm. : incrementing the coordinates data to the original coordinates of the object (Placement, Rotation ...)
If this is not checked the Placement begin in coordinates 0,0,0 of FreeCAD
In case a compound Placement information is [0,0,0] the Placement begin in the position of object
If the real location is away from the base coordinates 0,0,0 use the ValueAt() button
for the real Placement of the subObject selected Face, Wire, Line ....
• Coordinates
• ... : This button align the YZ values on the value of X to have the same values ​​XYZ (or manually)
Two click reset the coordinates values to 0.0
• Coordinate X : Move the copy to the Coordinate X selected (Base 0,0,0 if Increm. is not checked)
• Coordinate Y : Move the copy to the Coordinate Y selected (Base 0,0,0 if Increm. is not checked)
• Coordinate Z : Move the copy to the Coordinate Z selected (Base 0,0,0 if Increm. is not checked)
• Rotation
• ... : This button align the Pitch and Roll values on the value of Yaw to have the same values ​​Rotation (or manually)
Two click reset the rotations values to 0.0
• Yaw (Z ) : Rotate the copy to the axis Z (Yaw) (Begin 0 if Increm. is not checked)
• Pitch ( Y ) : Rotate the copy to the axis Y (Pitch) (Begin 0 if Increm. is not checked)
• Roll ( X ) : Rotate the copy to the axis X (Roll) (Begin 0 if Increm. is not checked)
• Scale predefined
• Scale predefined : predefined scales in units, km, hm, dam, m, dm, cm, mm, µm, nm, inch, link, foot, yard, perch, chain, furlong, mile, league, nautique
or choose a free value in the Scale free field.
• Number copy
• Number copy : number of copies
• Scale free
• ... : This button align the Scales values on the value of Scale X to have the same values ​​XYZ (or manually)
Two click reset the scales values to 1.0
• Scale X : free scale , if the value is negative ( -10) , the object is scaled x 10 and will be reversed in the X axis, to reduce the shape give a decimal value (0,5)
• Scale Y : free scale , if the value is negative ( -10) , the object is scaled x 10 and will be reversed in the Y axis, to reduce the shape give a decimal value (0,5)
• Scale Z : free scale , if the value is negative ( -10) , the object is scaled x 10 and will be reversed in the Z axis, to reduce the shape give a decimal value (0,5)
• ValueAt() : Give the valueAt() the subObject selected Face, Wire, Line ...
This option is useful in case a compound Placement information [0,0,0] and its real location is away from the base coordinates 0,0,0
(gives no provide information about the rotation of the object)
• Ok : the OK button validates and launches the command, if no object is selected the Ok button will be coloured in red
• Reset : the Reset button puts all the values to zero
• Quit : the Quit button exit the macro

## Script

The icone

Macro_CloneConvert.FCMacro

```# -*- coding: utf-8 -*-

# CloneConvert.FCMacro
# Cree un clone ou une copie de l'objet ou des objets selectionne(s) et le met e l'echelle de la grandeur choisie
# utilisation : lancer CloneConvert selectionnez un objet choisissez la grandeur et cliquez sur OK
#
# Creates a clone of one copy the selected object and updates the selected size range
# use: start CloneConvert select an object choose the size and click OK
#

#OS: Windows Vista                                #OS: Windows 8.1
#Word size: 32-bit                                #Word size of OS: 64-bit
#Version: 0.14.3700 (Git)                         #Word size of FreeCAD: 32-bit
#Hash: 32f5aae0a64333ec8d5d160dbc46e690510c8fe1   #Build type: Release
#Python version: 2.6.2                            #Branch: master
#Qt version: 4.5.2                                #Hash: 945638c405766faca0e5f4c1611c00151c88a2ff
#Coin version: 3.1.0                              #Python version: 2.7.8
#SoQt version: 1.4.1                              #Qt version: 4.8.6
#OCC version: 6.5.1                               #Coin version: 4.0.0a
#                                                 #OCC version: 6.8.0.oce-0.17
#

# ver 0.3 31/07/2014 PyQt4 + PySide
# ver 0.4 25/07/2015 ajout rotation
# ver 0.5 26/07/2015 correction rotation plusieurs objets Copy
# ver 0.6 26/01/2016 correction placement avec plusieurs objets Copy
# ver 0.7 30/01/2016 reecriture du code avec Placement et ajout Increment et de boutons
# ver 0.8 31/01/2016 clique 2 fois pour mettre les valeurs a zero (en cas de modifications reinitialisait )
# ver 0.8 14/06/2016 ajout du bouton nombre de copies et optimisation des labels

__title__ = "CloneConvert"
__author__ = "mario52"
__version__ = "00.09"
__date__    = "14/06/2016"

__Comment__ = "This macro creates Clone or Copy or Compound of object(s)"
__Help__ = "start the macro and follow the instructions"
__Status__ = "stable"

try:
import PyQt4                     # PyQt4
from PyQt4 import QtCore, QtGui  # PyQt4
#    print "PyQt4"

except Exception:
import PySide                    # PySide
from PySide import QtCore, QtGui # PySide
#    print "PySide"

from math import sqrt, pi, sin, cos, asin
from decimal import *
from Draft import *
from FreeCAD import Vector, Rotation, Placement, Console

try:
_fromUtf8 = QtCore.QString.fromUtf8
except AttributeError:
def _fromUtf8(s):
return s

try:
_encoding = QtGui.QApplication.UnicodeUTF8
def _translate(context, text, disambig):
return QtGui.QApplication.translate(context, text, disambig, _encoding)
except AttributeError:
def _translate(context, text, disambig):
return QtGui.QApplication.translate(context, text, disambig)

global surface     ; surface     = 0.0
global volume_     ; volume_     = 0.0
global boundBox_   ; boundBox_   = 0.0
global boundBoxLX  ; boundBoxLX  = 0.0
global boundBoxLY  ; boundBoxLY  = 0.0
global boundBoxLZ  ; boundBoxLZ  = 0.0
global boundBox_S  ; boundBox_S  = ""
global uniteM_X    ; uniteM_X    = 1.0
global uniteM_Y    ; uniteM_Y    = 1.0
global uniteM_Z    ; uniteM_Z    = 1.0
global uniteM      ; uniteM      = 1.0
global uniteMs     ; uniteMs     = "mm"   # default mm
global placement_X ; placement_X = 0.0
global placement_Y ; placement_Y = 0.0
global placement_Z ; placement_Z = 0.0
global Yaw_Z       ; Yaw_Z       = 0.0
global Pitch_Y     ; Pitch_Y     = 0.0
global Roll_X      ; Roll_X      = 0.0
global copyNumber  ; copyNumber  = 1

global switchP     ; switchP     = 0
global switchA     ; switchA     = 0
global switchS     ; switchS     = 0

global sel         ; sel         = ""
global cloneCopy   ; cloneCopy   = 1

global a ; a = ""
class Ui_MainWindow(object):

def __init__(self, MainWindow):

global uniteMs

self.window = MainWindow
MainWindow.setObjectName(_fromUtf8("MainWindow"))
MainWindow.resize(230, 549)
MainWindow.setMinimumSize(QtCore.QSize(230, 549))
MainWindow.setMaximumSize(QtCore.QSize(230, 549))
self.centralWidget = QtGui.QWidget(MainWindow)
self.centralWidget.setObjectName(_fromUtf8("centralWidget"))
self.label = QtGui.QLabel(self.centralWidget)
self.label.setGeometry(QtCore.QRect(10, 10, 191, 16))
self.label.setAlignment(QtCore.Qt.AlignCenter)
self.label.setObjectName(_fromUtf8("label"))

self.groupBox = QtGui.QGroupBox(self.centralWidget)
self.groupBox.setGeometry(QtCore.QRect(10, 30, 211, 141))
self.groupBox.setObjectName(_fromUtf8("groupBox"))

self.doubleSpinBox = QtGui.QDoubleSpinBox(self.groupBox)
self.doubleSpinBox.setGeometry(QtCore.QRect(100, 50, 101, 22))
self.doubleSpinBox.setDecimals(7)
self.doubleSpinBox.setMinimum(-10000000.0)
self.doubleSpinBox.setMaximum(10000000.0)
self.doubleSpinBox.setSingleStep(1.0)
self.doubleSpinBox.setProperty("value", 0.0)
self.doubleSpinBox.setObjectName(_fromUtf8("doubleSpinBox"))
self.doubleSpinBox.valueChanged.connect(self.on_doubleSpinBox_valueChanged) #connection doubleSpinBox

self.label_2 = QtGui.QLabel(self.groupBox)
self.label_2.setGeometry(QtCore.QRect(10, 50, 91, 16))
self.label_2.setObjectName(_fromUtf8("label_2"))

self.label_3 = QtGui.QLabel(self.groupBox)
self.label_3.setGeometry(QtCore.QRect(10, 80, 91, 16))
self.label_3.setObjectName(_fromUtf8("label_3"))

self.label_4 = QtGui.QLabel(self.groupBox)
self.label_4.setGeometry(QtCore.QRect(10, 110, 91, 16))
self.label_4.setObjectName(_fromUtf8("label_4"))

self.doubleSpinBox_2 = QtGui.QDoubleSpinBox(self.groupBox)
self.doubleSpinBox_2.setGeometry(QtCore.QRect(100, 80, 101, 22))
self.doubleSpinBox_2.setDecimals(7)
self.doubleSpinBox_2.setMinimum(-10000000.0)
self.doubleSpinBox_2.setMaximum(10000000.0)
self.doubleSpinBox_2.setSingleStep(1.0)
self.doubleSpinBox_2.setProperty("value", 0.0)
self.doubleSpinBox_2.setObjectName(_fromUtf8("doubleSpinBox_2"))
self.doubleSpinBox_2.valueChanged.connect(self.on_doubleSpinBox_2_valueChanged) #connection doubleSpinBox_2

self.doubleSpinBox_3 = QtGui.QDoubleSpinBox(self.groupBox)
self.doubleSpinBox_3.setGeometry(QtCore.QRect(100, 110, 101, 22))
self.doubleSpinBox_3.setDecimals(7)
self.doubleSpinBox_3.setMinimum(-10000000.0)
self.doubleSpinBox_3.setMaximum(10000000.0)
self.doubleSpinBox_3.setSingleStep(1.0)
self.doubleSpinBox_3.setProperty("value", 0.0)
self.doubleSpinBox_3.setObjectName(_fromUtf8("doubleSpinBox_3"))
self.doubleSpinBox_3.valueChanged.connect(self.on_doubleSpinBox_3_valueChanged) #connection doubleSpinBox_3

self.radioButton.setToolTip(_translate("MainWindow", "Create a clone of the object(s)", None))

self.radioButton_2.setToolTip(_translate("MainWindow", "Create a copy of the object(s)", None))

self.radioButton_3.setToolTip(_translate("MainWindow", "Create a compount of the object(s)", None))

self.checkBox = QtGui.QCheckBox(self.groupBox)
self.checkBox.setGeometry(QtCore.QRect(155, 20, 61, 20))
self.checkBox.setChecked(True)
self.checkBox.setToolTip(_translate("MainWindow", "Apply incremental changes to object Placement (Defaut)\n"+
"If this is not checked the Placement begin in coordinates 0,0,0 of FreeCAD\n"+
"In case a compound Placement information is [0,0,0] the Placement begin in the position of object\n"+
"If the real location is away from the base coordinates 0,0,0 use the ValueAt() button\n"
"for the real Placement of the subObject selected Face, Wire, Line ....", None))
self.checkBox.setObjectName(_fromUtf8("checkBox"))

self.pushButton_5 = QtGui.QPushButton(self.groupBox)
self.pushButton_5.setGeometry(QtCore.QRect(75, 50, 21, 22))
self.pushButton_5.setObjectName(_fromUtf8("pushButton_5"))
self.pushButton_5.clicked.connect(self.on_pushButton_5_clicked)                     # connect on def "on_pushButton_5_clicked"

self.groupBox_2 = QtGui.QGroupBox(self.centralWidget)
self.groupBox_2.setGeometry(QtCore.QRect(10,300,101,51))
self.groupBox_2.setObjectName(_fromUtf8("groupBox_2"))

self.comboBox = QtGui.QComboBox(self.groupBox_2)
self.comboBox.setGeometry(QtCore.QRect(10, 20, 81, 22))
self.comboBox.setMinimumContentsLength(0)
self.comboBox.setObjectName(_fromUtf8("comboBox"))
self.comboBox.setToolTip(_translate("MainWindow",u"Select unit. . .", None))
QtCore.QObject.connect(self.comboBox, QtCore.SIGNAL("currentIndexChanged(QString)"), self.SIGNAL_comboBox_Changed)

self.groupBox_3 = QtGui.QGroupBox(self.centralWidget)
self.groupBox_3.setGeometry(QtCore.QRect(10, 360, 211, 111))
self.groupBox_3.setObjectName(_fromUtf8("groupBox_3"))

self.doubleSpinBox_4 = QtGui.QDoubleSpinBox(self.groupBox_3)
self.doubleSpinBox_4.setGeometry(QtCore.QRect(100, 20, 101, 22))
self.doubleSpinBox_4.setDecimals(7)
self.doubleSpinBox_4.setMinimum(-1000000)
self.doubleSpinBox_4.setMaximum(1000000.0)
self.doubleSpinBox_4.setSingleStep(1.0)
self.doubleSpinBox_4.setProperty("value", 1.0)
self.doubleSpinBox_4.setObjectName(_fromUtf8("doubleSpinBox_4"))
self.doubleSpinBox_4.setToolTip(_translate("MainWindow", "Scale free X multiplied by ...\nIf the value is negative the object result is reverted in X axis", None))
self.doubleSpinBox_4.valueChanged.connect(self.on_doubleSpinBox_4_valueChanged) #connection doubleSpinBox_4

self.doubleSpinBox_5 = QtGui.QDoubleSpinBox(self.groupBox_3)
self.doubleSpinBox_5.setGeometry(QtCore.QRect(100, 50, 101, 22))
self.doubleSpinBox_5.setDecimals(7)
self.doubleSpinBox_5.setMinimum(-1000000)
self.doubleSpinBox_5.setMaximum(1000000.0)
self.doubleSpinBox_5.setSingleStep(1.0)
self.doubleSpinBox_5.setProperty("value", 1.0)
self.doubleSpinBox_5.setObjectName(_fromUtf8("doubleSpinBox_5"))
self.doubleSpinBox_5.setToolTip(_translate("MainWindow", "Scale free Y multiplied by ...\n"+
"If the value is negative the object result is reverted in Y axis", None))
self.doubleSpinBox_5.valueChanged.connect(self.on_doubleSpinBox_5_valueChanged) #connection doubleSpinBox_5

self.doubleSpinBox_6 = QtGui.QDoubleSpinBox(self.groupBox_3)
self.doubleSpinBox_6.setGeometry(QtCore.QRect(100, 80, 101, 22))
self.doubleSpinBox_6.setDecimals(7)
self.doubleSpinBox_6.setMinimum(-1000000)
self.doubleSpinBox_6.setMaximum(1000000.0)
self.doubleSpinBox_6.setSingleStep(1.0)
self.doubleSpinBox_6.setProperty("value", 1.0)
self.doubleSpinBox_6.setObjectName(_fromUtf8("doubleSpinBox_6"))
self.doubleSpinBox_6.setToolTip(_translate("MainWindow", "Scale free Z multiplied by ...\n"+
"If the value is negative the object result is reverted in Z axis", None))
self.doubleSpinBox_6.valueChanged.connect(self.on_doubleSpinBox_6_valueChanged) #connection doubleSpinBox_6

self.label_5 = QtGui.QLabel(self.groupBox_3)
self.label_5.setGeometry(QtCore.QRect(10, 20, 53, 16))
self.label_5.setObjectName(_fromUtf8("label_5"))

self.label_6 = QtGui.QLabel(self.groupBox_3)
self.label_6.setGeometry(QtCore.QRect(10, 50, 53, 16))
self.label_6.setObjectName(_fromUtf8("label_6"))

self.label_7 = QtGui.QLabel(self.groupBox_3)
self.label_7.setGeometry(QtCore.QRect(10, 80, 53, 16))
self.label_7.setObjectName(_fromUtf8("label_7"))

self.pushButton_6 = QtGui.QPushButton(self.centralWidget)
self.pushButton_6.setGeometry(QtCore.QRect(10, 479, 65, 25))
self.pushButton_6.setObjectName(_fromUtf8("pushButton_6"))
self.pushButton_6.clicked.connect(self.on_pushButton_6_clicked) # connect on def "on_pushButton_6_clicked"

self.pushButton = QtGui.QPushButton(self.centralWidget)
self.pushButton.setGeometry(QtCore.QRect(82, 510, 65, 28))
self.pushButton.setObjectName(_fromUtf8("pushButton"))

self.pushButton_1 = QtGui.QPushButton(self.centralWidget)
self.pushButton_1.setGeometry(QtCore.QRect(10, 510, 65, 28))
self.pushButton_1.setObjectName(_fromUtf8("pushButton_1"))
self.pushButton_1.setStyleSheet("background-color: Base")
self.pushButton_1.clicked.connect(self.on_pushButton01_clicked) #connection pushButton01 "OK"

self.pushButton_2 = QtGui.QPushButton(self.centralWidget)
self.pushButton_2.setGeometry(QtCore.QRect(155, 510, 65, 28))
self.pushButton_2.setObjectName(_fromUtf8("pushButton_2"))
self.pushButton_2.clicked.connect(self.on_pushButton02_clicked) #connection pushButton02 "Quitter"

self.pushButton_3 = QtGui.QPushButton(self.groupBox_3)
self.pushButton_3.setGeometry(QtCore.QRect(75, 20, 21, 21))
self.pushButton_3.setToolTip(_fromUtf8("Align the Scale YZ to X"))
self.pushButton_3.setObjectName(_fromUtf8("pushButton_3"))
self.pushButton_3.clicked.connect(self.on_pushButton03_clicked) #connection pushButton03 "..." align YZ to X

self.groupBox_4 = QtGui.QGroupBox(self.centralWidget)
self.groupBox_4.setGeometry(QtCore.QRect(10, 180, 211, 111))
self.groupBox_4.setObjectName(_fromUtf8("groupBox_4"))

self.doubleSpinBox_7 = QtGui.QDoubleSpinBox(self.groupBox_4)
self.doubleSpinBox_7.setGeometry(QtCore.QRect(100, 20, 101, 22))
self.doubleSpinBox_7.setDecimals(7)
self.doubleSpinBox_7.setMinimum(-360.0)
self.doubleSpinBox_7.setMaximum(360.0)
self.doubleSpinBox_7.setObjectName(_fromUtf8("doubleSpinBox_7"))
self.doubleSpinBox_7.setToolTip(_translate("MainWindow", "Rotation of Yaw ( Axis Z )", None))
self.doubleSpinBox_7.valueChanged.connect(self.on_doubleSpinBox_7_valueChanged) #connection doubleSpinBox_7

self.doubleSpinBox_8 = QtGui.QDoubleSpinBox(self.groupBox_4)
self.doubleSpinBox_8.setGeometry(QtCore.QRect(100, 50, 101, 22))
self.doubleSpinBox_8.setDecimals(7)
self.doubleSpinBox_8.setMinimum(-360.0)
self.doubleSpinBox_8.setMaximum(360.0)
self.doubleSpinBox_8.setObjectName(_fromUtf8("doubleSpinBox_8"))
self.doubleSpinBox_8.setToolTip(_translate("MainWindow", "Rotation of Pitch ( Axis Y )", None))
self.doubleSpinBox_8.valueChanged.connect(self.on_doubleSpinBox_8_valueChanged) #connection doubleSpinBox_8

self.doubleSpinBox_9 = QtGui.QDoubleSpinBox(self.groupBox_4)
self.doubleSpinBox_9.setGeometry(QtCore.QRect(100, 80, 101, 22))
self.doubleSpinBox_9.setDecimals(7)
self.doubleSpinBox_9.setMinimum(-360.0)
self.doubleSpinBox_9.setMaximum(360.0)
self.doubleSpinBox_9.setObjectName(_fromUtf8("doubleSpinBox_9"))
self.doubleSpinBox_9.setToolTip(_translate("MainWindow", "Rotation of Roll ( Axis X )", None))
self.doubleSpinBox_9.valueChanged.connect(self.on_doubleSpinBox_9_valueChanged) #connection doubleSpinBox_9

self.groupBox_5 = QtGui.QGroupBox(self.centralWidget)
self.groupBox_5.setGeometry(QtCore.QRect(120,300,101,51))
self.groupBox_5.setObjectName(_fromUtf8("groupBox_5"))

self.SpinBox = QtGui.QSpinBox(self.groupBox_5)
self.SpinBox.setGeometry(QtCore.QRect(10, 20, 81, 22))
self.SpinBox.setMaximum(1000000)
self.SpinBox.setProperty("value", 1)
self.SpinBox.setObjectName(_fromUtf8("SpinBox"))
self.SpinBox.setToolTip(_translate("MainWindow", "Number copy of original", None))
self.SpinBox.valueChanged.connect(self.on_SpinBox_valueChanged) #connection SpinBox

self.label_8 = QtGui.QLabel(self.groupBox_4)
self.label_8.setGeometry(QtCore.QRect(10, 20, 81, 16))
self.label_8.setObjectName(_fromUtf8("label_8"))

self.label_9 = QtGui.QLabel(self.groupBox_4)
self.label_9.setGeometry(QtCore.QRect(10, 50, 81, 16))
self.label_9.setObjectName(_fromUtf8("label_9"))

self.label_10 = QtGui.QLabel(self.groupBox_4)
self.label_10.setGeometry(QtCore.QRect(10, 80, 81, 16))
self.label_10.setObjectName(_fromUtf8("label_10"))

self.pushButton_4 = QtGui.QPushButton(self.groupBox_4)
self.pushButton_4.setGeometry(QtCore.QRect(75, 20, 21, 22))
self.pushButton_4.setObjectName(_fromUtf8("pushButton_4"))
self.pushButton_4.clicked.connect(self.on_pushButton_4_clicked) # connect on def "on_pushButton_4_clicked"

self.pushButton.clicked.connect(self.on_pushButton00_clicked)   #connection pushButton00 "Reset"

self.lineEdit = QtGui.QLineEdit(self.centralWidget)
self.lineEdit.setGeometry(QtCore.QRect(83, 481, 136, 20))
self.lineEdit.setObjectName(_fromUtf8("lineEdit"))
self.lineEdit.setText(QtGui.QApplication.translate("Form", " ", None, QtGui.QApplication.UnicodeUTF8))

MainWindow.setCentralWidget(self.centralWidget)
self.retranslateUi(MainWindow)
QtCore.QMetaObject.connectSlotsByName(MainWindow)

def retranslateUi(self, MainWindow):
MainWindow.setWindowTitle(_translate("MainWindow", "CloneConvert", None))
try:
MainWindow.setWindowFlags(PyQt4.QtCore.Qt.WindowStaysOnTopHint)  # cette fonction met la fenetre en avant
except Exception:
MainWindow.setWindowFlags(PySide.QtCore.Qt.WindowStaysOnTopHint)  # cette fonction met la fenetre en avant
self.label.setText(_translate("MainWindow", "Object converter", None))
self.groupBox.setTitle(_translate("MainWindow", "Mode", None))

self.checkBox.setText(_translate("MainWindow", "Increm.", None))

self.pushButton_4.setToolTip(_translate("MainWindow", "Align the YX degrees values to Z value \n Two click reset the rotations values to 0.0", None))
self.pushButton_4.setText(_translate("MainWindow", "...", None))
self.pushButton_5.setToolTip(_translate("MainWindow", "Align the YZ coordinates values to X value  \n Two click reset the coordinates values to 0.0", None))
self.pushButton_5.setText(_translate("MainWindow", "...", None))
self.pushButton_3.setToolTip(_translate("MainWindow", "Align the YZ scale values to X scale value  \n Two click reset the scales values to 1.0", None))
self.pushButton_3.setText(_translate("MainWindow", "...", None))

self.doubleSpinBox.setToolTip(_translate("MainWindow", "Place the new object to the X coordinate ", None))
self.doubleSpinBox.setSuffix(_translate("MainWindow", " mm", None))
self.doubleSpinBox_2.setToolTip(_translate("MainWindow", "Place the new object to the Y coordinate", None))
self.doubleSpinBox_2.setSuffix(_translate("MainWindow", " mm", None))
self.doubleSpinBox_3.setToolTip(_translate("MainWindow", "Place the new object to the Z coordinate", None))
self.doubleSpinBox_3.setSuffix(_translate("MainWindow", " mm", None))

self.label_2.setText(_translate("MainWindow", "Coordinate X", None))
self.label_3.setText(_translate("MainWindow", "Coordinate Y", None))
self.label_4.setText(_translate("MainWindow", "Coordinate Z", None))

self.groupBox_2.setTitle(_translate("MainWindow", "Scale predefined", None))
self.comboBox.setToolTip(_translate("MainWindow", "Convert your object to . . .", None))
self.comboBox.setCurrentIndex(6)
self.comboBox.setItemText(0, _translate("MainWindow", "km", None))         #km #        = 1000000
self.comboBox.setItemText(1, _translate("MainWindow", "hm", None))         #hm #        = 100000
self.comboBox.setItemText(2, _translate("MainWindow", "dam", None))        #dam#        = 10000
self.comboBox.setItemText(3, _translate("MainWindow", "m", None))          #m  #        = 1000
self.comboBox.setItemText(4, _translate("MainWindow", "dm", None))         #dm #        = 100
self.comboBox.setItemText(5, _translate("MainWindow", "cm", None))         #cm #        = 10
self.comboBox.setItemText(6, _translate("MainWindow", "mm", None))         #mm #        = 1        #####
self.comboBox.setItemText(7, _translate("MainWindow", "µm", None))         #µm # micro  = 0.001
self.comboBox.setItemText(8, _translate("MainWindow", "nm", None))         #nm # nano   = 0.000001
self.comboBox.setItemText(9, _translate("MainWindow", "inch", None))       #in # inch  pouce    = 25.400
self.comboBox.setItemText(11, _translate("MainWindow", "foot", None))      #ft # foot  pied     = 304.800
self.comboBox.setItemText(12, _translate("MainWindow", "yard", None))      #yd # yard  verge    = 914.400
self.comboBox.setItemText(13, _translate("MainWindow", "perch", None))     #rd # rod ou perch   perche   = 5029.200
self.comboBox.setItemText(14, _translate("MainWindow", "chain", None))     #ch # chain chaine   = 20116.800
self.comboBox.setItemText(15, _translate("MainWindow", "furlong", None))   #fur# furlong        = 201168
self.comboBox.setItemText(16, _translate("MainWindow", "mile", None))      #mi # mile           = 1609344
self.comboBox.setItemText(17, _translate("MainWindow", "league", None))    #lea# league lieue   = 4828032
self.comboBox.setItemText(18, _translate("MainWindow", "nautique", None))  #nmi# mile nautique  = 1852000

self.groupBox_3.setTitle(_translate("MainWindow", "Scale free", None))
self.label_5.setText(_translate("MainWindow", "Scale X", None))
self.label_6.setText(_translate("MainWindow", "Scale Y", None))
self.label_7.setText(_translate("MainWindow", "Scale Z", None))

self.pushButton.setToolTip(_translate("MainWindow", "Reset the values", None))
self.pushButton.setText(_translate("MainWindow", "Reset", None))
self.pushButton_1.setToolTip(_translate("MainWindow", "Ok for Convert Copy or Compount", None))
self.pushButton_1.setText(_translate("MainWindow", "Ok", None))
self.pushButton_2.setToolTip(_translate("MainWindow", "Quit the macro", None))
self.pushButton_2.setText(_translate("MainWindow", "Quit", None))

self.pushButton_6.setToolTip(_translate("MainWindow", "Give the valueAt() the subObject selected Face, Wire, Line ...\n"+
"This option is useful in case a compound Placement information [0,0,0]\n"+
"and its real location is away from the base coordinates 0,0,0\n"+
"(gives no provide information about the tilt of the object)", None))
self.pushButton_6.setText(_translate("MainWindow", "ValueAt()", None))

self.groupBox_4.setTitle(_translate("MainWindow", "Rotation", None))
self.groupBox_5.setTitle(_translate("MainWindow", "Number copy", None))
self.label_8.setText(_translate("MainWindow", "Yaw ( Z )", None))
self.label_9.setText(_translate("MainWindow", "Pitch ( Y )", None))
self.label_10.setText(_translate("MainWindow", "Roll ( X )", None))
self.doubleSpinBox_7.setSuffix(_translate("MainWindow", " Deg", None))
self.doubleSpinBox_8.setSuffix(_translate("MainWindow", " Deg", None))
self.doubleSpinBox_9.setSuffix(_translate("MainWindow", " Deg", None))

def SIGNAL_comboBox_Changed(self,text):
global uniteM_X
global uniteM_Y
global uniteM_Z
global uniteM
global uniteMs

try:
text = unicode(text, 'ISO-8859-1').encode('UTF-8')  # PyQt4
except Exception:
text = text.encode('utf-8')                         # PySide

if text == "km":        #        = 1000000
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 1000000.0
uniteMs= "km"
elif text == "hm":      #        = 100000
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 100000.0
uniteMs= "hm"
elif text == "dam":     #        = 10000
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 10000.0
uniteMs= "dam"
elif text == "m":       #        = 1000
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 1000.0
uniteMs= "m"
elif text == "dm":      #        = 100
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 100.0
uniteMs= "dm"
elif text == "cm":      #        = 10
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 10.0
uniteMs= "cm"
elif text == "mm":      #        = 1  ###############################
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 1.0
uniteMs= "mm"
elif text == "µm":      #        = 1000
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 1.0/1000.0
uniteMs= u"µm"
elif text == "nm":      #        = 1000000
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 1.0/1000000.0
uniteMs= u"nm"
elif text == "inch":    # inch   = 25.400
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 25.400
uniteMs= "in"
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 201.168
uniteMs= "lk"
elif text == "foot":    # foot   = 304.800
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 304.800
uniteMs= "ft"
elif text == "yard":    # yard   = 914.400
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 914.400
uniteMs= "yd"
elif text == "perch":   #rd # rod   perche    = 5029.200
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 5029.200
uniteMs= "rd"
elif text == "chain":   # chain  = 20116.800
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 20116.800
uniteMs= "ch"
elif text == "furlong": # furlong= 201168
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 201168
uniteMs= "fur"
elif text == "mile":     # mile   = 1609344
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 1609344
uniteMs= "mi"
elif text == "league":   # league = 4828032
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 4828032
uniteMs= "lea"
elif text == "nautique": # nautique = 1852000
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 1852000
uniteMs= "nmi"
else:                    # mm = 1
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 1.0
uniteMs= "mm"

self.doubleSpinBox_4.setProperty("value", uniteM_X)
self.doubleSpinBox_5.setProperty("value", uniteM_Y)
self.doubleSpinBox_6.setProperty("value", uniteM_Z)

def on_radioButton_clicked(self):                    # if checked then mode clone
global cloneCopy
cloneCopy = 1

def on_radioButton_2_clicked(self):                  # if checked then mode copy
global cloneCopy
cloneCopy = 0

def on_radioButton_3_clicked(self):                  # if checked then mode compount
global cloneCopy
cloneCopy = 2

def on_doubleSpinBox_valueChanged(self,value):       # doubleSpinbox X
global placement_X
global switchP
switchP     = 0
placement_X = value
def on_doubleSpinBox_2_valueChanged(self,value):     # doubleSpinbox Y
global placement_Y
global switchP
switchP     = 0
placement_Y = value

def on_doubleSpinBox_3_valueChanged(self,value):     #  doubleSpinbox Z
global placement_Z
global switchP
switchP     = 0
placement_Z = value

def on_doubleSpinBox_4_valueChanged(self,value):     # doubleSpinbox free X
global uniteM_X
global switchS
switchS  = 0
uniteM_X = value
if uniteM_X == 0:
uniteM_X = 1

def on_doubleSpinBox_5_valueChanged(self,value):     # doubleSpinbox free Y
global uniteM_Y
global switchS
switchS  = 0
uniteM_Y = value
if uniteM_Y == 0:
uniteM_Y = 1

def on_doubleSpinBox_6_valueChanged(self,value):     #  doubleSpinbox free Z
global uniteM_Z
global switchS
switchS  = 0
uniteM_Z = value
if uniteM_Z == 0:
uniteM_Z = 1

def on_doubleSpinBox_7_valueChanged(self,value):     # doubleSpinBox_7  Yaw ( Z )
global Yaw_Z
global switchA
switchA  = 0
Yaw_Z = value

def on_doubleSpinBox_8_valueChanged(self,value):     # doubleSpinBox_8 Pitch ( Y )
global Pitch_Y
global switchA
switchA  = 0
Pitch_Y = value

def on_doubleSpinBox_9_valueChanged(self,value):     # doubleSpinBox_9 Roll ( X )
global Roll_X
global switchA
switchA  = 0
Roll_X = value

def on_SpinBox_valueChanged(self,value):             # SpinBox Number copy
global copyNumber
copyNumber = value

def on_pushButton_5_clicked(self):                   # Bouton ... (align) placement
global placement_X
global placement_Y
global placement_Z
global switchP

if switchP == 0:
placement_Y = placement_Z = placement_X
switchP = 1
else:
placement_Y = placement_Z = placement_X = 0.0
switchP = 0

self.doubleSpinBox.setProperty("value", placement_X)
self.doubleSpinBox_2.setProperty("value", placement_Y)
self.doubleSpinBox_3.setProperty("value", placement_Z)

def on_pushButton_6_clicked(self):                    # valueAt() placement detected
try:
App.Console.PrintMessage(str(sel[0].Placement) +"\r\n")
selectionObjects = FreeCADGui.Selection.getSelectionEx()   # Select an object or sub object getSelectionEx
edge = selectionObjects[0].SubObjects[0]
try:
self.lineEdit.setText(str(edge.valueAt(0,0))) # face
self.pushButton_6.setText(_translate("MainWindow", "ValueAt(0,0)", None))
App.Console.PrintMessage(str(edge.valueAt(0,0)) +"\r\n")
except Exception:
self.lineEdit.setText(str(edge.valueAt(0)))   # fil
self.pushButton_6.setText(_translate("MainWindow", "ValueAt(0)", None))
App.Console.PrintMessage(str(edge.valueAt(0)) +"\r\n")
except Exception:
self.pushButton_6.setText(_translate("MainWindow", "ValueAt()", None))
App.Console.PrintError("Select one subObject, Face, Wire, Line ..."+"\r\n")
App.Console.PrintMessage("____________________________________"+"\r\n")

def on_pushButton_4_clicked(self):                   # Bouton ... (align) rotation
global Yaw_Z
global Pitch_Y
global Roll_X
global switchA

if switchA == 0:
Pitch_Y = Roll_X = Yaw_Z
switchA = 1
else:
Pitch_Y = Roll_X = Yaw_Z = 0.0
switchA = 0

self.doubleSpinBox_7.setProperty("value", Yaw_Z)
self.doubleSpinBox_8.setProperty("value", Pitch_Y)
self.doubleSpinBox_9.setProperty("value", Roll_X)

def on_pushButton03_clicked(self):                   # Bouton ... (align) uniteM
global uniteM_X
global uniteM_Y
global uniteM_Z
global switchS
global uniteM
global uniteMs

if switchS == 0:
uniteM_Y = uniteM_Z = uniteM_X
switchS = 1
else:
uniteM_Y = uniteM_Z = uniteM_X = 1.0
switchS = 0

self.doubleSpinBox_4.setProperty("value", uniteM_X)
self.doubleSpinBox_5.setProperty("value", uniteM_Y)
self.doubleSpinBox_6.setProperty("value", uniteM_Z)

def on_pushButton00_clicked(self):                   # Bouton Reset
global sel
global uniteM_X
global uniteM_Y
global uniteM_Z
global uniteM
global uniteMs
global placement_X
global placement_Y
global placement_Z
global cloneCopy
global Yaw_Z
global Pitch_Y
global Roll_X
global copyNumber

sel         = ""

self.pushButton_1.setToolTip(_translate("MainWindow", "Ok for Convert or copy", None))
self.pushButton_1.setStyleSheet("background-color: Base")

cloneCopy = 1

self.comboBox.setCurrentIndex(6)
self.doubleSpinBox.setProperty("value",   0.0) # coordinates
self.doubleSpinBox_2.setProperty("value", 0.0)
self.doubleSpinBox_3.setProperty("value", 0.0)
self.checkBox.setChecked(True)

placement_X = placement_Y = placement_Z = 0.0

self.doubleSpinBox_4.setProperty("value", 1.0) # scale
self.doubleSpinBox_5.setProperty("value", 1.0)
self.doubleSpinBox_6.setProperty("value", 1.0)

self.doubleSpinBox_7.setProperty("value", 0.0) # angles
self.doubleSpinBox_8.setProperty("value", 0.0)
self.doubleSpinBox_9.setProperty("value", 0.0)

self.SpinBox.setProperty("value", 1)           # number copy
copyNumber  = 1

uniteM = uniteM_X = uniteM_Y = uniteM_Z = 1.0
uniteMs= "mm"
uniteM = 1
self.lineEdit.setText("")

def on_pushButton01_clicked(self):                  # Bouton OK
global sel
global surface
global volume_
global boundBox
global boundBoxLX
global boundBoxLY
global boundBoxLZ
global boundBox_S
global uniteM_X
global uniteM_Y
global uniteM_Z
global uniteM
global uniteMs
global placement_X
global placement_Y
global placement_Z
global sel
global Yaw_Z
global Pitch_Y
global Roll_X
global copyNumber
#### Chrono begin ######################################################################### chrono begin
import time                                                                            #### chrono begin
depart = time.clock()                                                                  #### chrono begin
#### Chrono begin ######################################################################### chrono begin

if len(sel) != 0:

self.pushButton_1.setToolTip(_translate("MainWindow", "Ok for Convert or copy", None))
self.pushButton_1.setStyleSheet("background-color: Base")

# boundinbox (dimensions hors tout)
try:
boundBox_ = sel[0].Shape.BoundBox # pour 1 seul objet, (le premier)
boundBoxLX = boundBox_.XLength
boundBoxLY = boundBox_.YLength
boundBoxLZ = boundBox_.ZLength
except:
boundBox_  = 0.0
boundBoxLX = 0.0
boundBoxLY = 0.0
boundBoxLZ = 0.0
boundBox_S = ""

# volume de tous les objets
volume_ = 0.0
try:
for i in range(len(sel)):
volume_ += sel[i].Shape.Volume
except:
volume_ = 0.0

# surface de tous les objets
surface = 0.0
try:
for i in range(len(sel)):
surface += sel[i].Shape.Area
except:
surface = 0.0

boundBox_S = "[X: "+str(boundBoxLX)+" mm] x [Y: "+str(boundBoxLY)+" mm] x [Z:"+str(boundBoxLZ)+" mm]"
App.Console.PrintMessage("Original boundBox : "+boundBox_S+"\r\n")
App.Console.PrintMessage("Original volume_  : "+str(volume_)+" mm3 ("+str(len(sel))+" element(s))"+"\r\n")
App.Console.PrintMessage("Original surface  : "+str(surface)+" mm2 ("+str(len(sel))+" element(s))"+"\r\n")
App.Console.PrintMessage("- - - - - - - - - -"+"\r\n")

try:
obj = comptName = ""

for copies in range(1,copyNumber+1): ##### Boucle copies Debut ###########################

if copyNumber > 1:
comptName = str(copies)

if cloneCopy == 1:       # clone ok
import Draft
mess = "Clone"
obj=Draft.clone(sel)
obj.Scale = (uniteM_X, uniteM_Y, uniteM_Z)
if self.checkBox.isChecked(): # if checkbox is checked then .... increment
obj.Placement=App.Placement(App.Vector(placement_X,placement_Y,placement_Z), App.Rotation(Yaw_Z,Pitch_Y,Roll_X), App.Vector(0,0,0)).multiply(App.activeDocument().getObject(obj.Name).Placement) # increment
else:
obj.Placement=App.Placement(App.Vector(placement_X,placement_Y,placement_Z), App.Rotation(Yaw_Z,Pitch_Y,Roll_X), App.Vector(0,0,0))
oL = obj.Label[:5] + " " + comptName + " " +  obj.Label[6:]
obj.Label = oL

if cloneCopy == 0:     # copy ok
import Draft
mess = "Copy "
for i in range(len(sel)):
obj = Draft.scale(sel[i],delta=App.Vector(uniteM_X, uniteM_Y, uniteM_Z),center=App.Vector(0,0,0),copy=True,legacy=True)
if self.checkBox.isChecked(): # if checkbox is checked then .... increment
obj.Placement=App.Placement(App.Vector(placement_X,placement_Y,placement_Z), App.Rotation(Yaw_Z,Pitch_Y,Roll_X), App.Vector(0,0,0)).multiply(App.activeDocument().getObject(obj.Name).Placement) # increment
else:
obj.Placement=App.Placement(App.Vector(placement_X,placement_Y,placement_Z), App.Rotation(Yaw_Z,Pitch_Y,Roll_X), App.Vector(0,0,0))
obj.Label = "Copy " + comptName + " of " + obj.Label

if cloneCopy == 2:     # compound ok
import Draft
mess = "Compount "
liste = []
########################################################################################################################
#                    objori = Draft.makeBlock(Gui.Selection.getSelection())                             # create Block other method compound
#                    obj = Draft.scale([objori],delta=App.Vector(uniteM_X, uniteM_Y, uniteM_Z),center=App.Vector(0,0,0))
#                    App.activeDocument().removeObject(objori.Name)
########################################################################################################################

#######################################################################################################################
objori = App.activeDocument().addObject("Part::Compound","Compound")                # create method compound
for i in range(len(sel)):
liste.append(sel[i].Name)
obj = Draft.scale([objori],delta=App.Vector(uniteM_X, uniteM_Y, uniteM_Z),center=App.Vector(0,0,0))
#######################################################################################################################

#                    try:                                                    # optional delette the original objects
#                        App.activeDocument().removeObject(objori.Name)
#                        for i in liste:
#                            App.activeDocument().removeObject(i)
#                    except:
#                        None

if self.checkBox.isChecked():                           # if checkbox is checked then .... increment
obj.Placement=App.Placement(App.Vector(placement_X,placement_Y,placement_Z), App.Rotation(Yaw_Z,Pitch_Y,Roll_X), App.Vector(0,0,0)).multiply(App.activeDocument().getObject(obj.Name).Placement) # increment
else:
obj.Placement=App.Placement(App.Vector(placement_X,placement_Y,placement_Z), App.Rotation(Yaw_Z,Pitch_Y,Roll_X), App.Vector(0,0,0))
obj.Label = "Compount " + comptName + " of " + obj.Label
try:
objori.Label = "Ori " + obj.Label                    # renamme the original object
except Exception:
None
##### Boucle copies Fin ###########################

#                print "[ ",placement_X," ",placement_Y," ",placement_Z," ]  [ ",Yaw_Z," ",Pitch_Y," ",Roll_X," ]"
# boundinbox (dimensions hors tout)
try:
boundBox_ = obj.Shape.BoundBox
boundBoxLX = boundBox_.XLength
boundBoxLY = boundBox_.YLength
boundBoxLZ = boundBox_.ZLength
except:
boundBox_  = 0.0
boundBoxLX = 0.0
boundBoxLY = 0.0
boundBoxLZ = 0.0

# volume
volume_ = 0.0
try:
volume_ = obj.Shape.Volume
except:
for i in range(len(obj)):
volume_ += obj[i].Shape.Volume

# surface
surface = 0.0
try:
surface = obj.Shape.Area
except:
for i in range(len(obj)):
surface += obj[i].Shape.Area

App.Console.PrintMessage(obj.Label+"\r\n")
App.Console.PrintMessage("Convert mm in ' "+uniteMs+" ' (1 "+uniteMs+" = "+str(uniteM)+" mm)"+"\r\n")
App.Console.PrintMessage(mess + " boundBox_X  : "+str(boundBoxLX)+" mm"+"\r\n")
App.Console.PrintMessage(mess + " boundBox_Y  : "+str(boundBoxLY)+" mm"+"\r\n")
App.Console.PrintMessage(mess + " boundBox_Z  : "+str(boundBoxLZ)+" mm"+"\r\n")
App.Console.PrintMessage(mess + " volume      : "+str(volume_)+" mm3 ("+str(len(sel))+" element(s))"+"\r\n")#
App.Console.PrintMessage(mess + " surface     : "+str(surface)+" mm2 ("+str(len(sel))+" element(s))"+"\r\n")#
#### Chrono end ########################################################################### chrono end
arrivee = time.clock()                                                                 #### chrono end
App.Console.PrintMessage("Time : "+str("%.2f" % ((arrivee - depart)/60))+" min"+"\r\n")#### chrono end
#### Chrono end ########################################################################### chrono end
App.Console.PrintMessage("___________________"+"\r\n")
self.pushButton_1.setStyleSheet("background-color: green")

except Exception:
else:
self.pushButton_1.setStyleSheet("background-color: red")#red
self.pushButton_1.setToolTip(_translate("MainWindow", "Not object selected for Convert or copy", None))

sel = ""

def on_pushButton02_clicked(self):                   # Bouton Quitter
App.Console.PrintMessage("End CloneConvert\r\n")
self.window.hide()

MainWindow = QtGui.QMainWindow()
ui = Ui_MainWindow(MainWindow)

MainWindow.show()```

## Revision

14/06/2016 ver 0.9 = ver 0.8 06/14/2016 adding the choice of number of copies and labels optimization

31/01/2016 ver 0.8 = modify the buttons reset section for two click for reset (in case modification the value)

30/01/2016 ver 0.7 = rewriting code with Placement and Increment and adding buttons Compound, Increment, ValueAt(),

26/01/2016 ver 0.6 = correction placement with many objets Copy

26/07/2015 ver 0.5 = correction rotate many objects Function Copy

25/07/2015 ver 0.4 = adding rotation

11/08/2014 replace "AttributeError" to "Exception"

02/07/2014 ver. 0.3 = modified to operate PyQt4 and PySide

09/05/2014 ver. 0.2 = adding function "Copy"

Other languages:
Deutsch • ‎English • ‎français • ‎italiano