Macro CloneConvert

From FreeCAD Documentation
Revision as of 10:43, 2 August 2014 by Mario52 (talk | contribs) (ver. 0.3 = modified to operate PyQt4 and PySide)
Jump to navigation Jump to search

32px Macro CloneConvert

Description
Creates a clone of the object and the converted in the chosen position and size (inch, mm, m, µm...).

Author
mario52
Download
None
Links
Macro Version
1.0
Date last modified
None
FreeCAD Version(s)
None
Default shortcut
None
See also
None


Description

Creates a clone or copy of the object and the converted in the chosen position and size (inch, mm, m, µm...) or free. The base object is recognized in mm (FreeCAd base)

Uses

Run the macro, the XYZ settings, choose "Clone" or "Copy" a unit or one value of choice select your object, and click Ok button.

If no value is entered a copy or clone will be created without modification. If no object is selected the Ok button will be colored in red.

The value of the BoundingBox, Volume and Surface is diplayed in the Report view, in the case of Copy multiple object, the display will show BoundingBox 0.0.


The base is the mm example with a 1 mm cube of side :

Select in the comboBox inch, 1 inch = 25.4 mm , the fields "Scale free" automatically adjusts to 25.4 (the values ​​in "Scale-free" can be changed separately). Click Ok button, the clone created will have 25,4 mm x 25,4 mm x 25,4 mm

150% = 1,50 in the "Scale free" fields

104% = 1,04 in the "Scale free" fields

Inverse operation :

If you want to reduce an object ex: a cube 25.4 mm (1 inch) in cube 1 mm sides, use the following formula, 1 / 25.4 = 0.0393700 and enter the value 0,0393700 (with comma) in the Scale field XY and Z.

In a cube of 5 mm, made​​ 5 / 25.4 = 0.1968503 and enter the value 0,1968503 (with comma) in the Scale field XY and Z.

50% = 0,50 in the "Scale free" fields

4% = 0,04 in the "Scale free" fields


Predefined units are :

km, hm, dam, m, dm, cm, mm, µm, nm, inch, link, foot, yard, perch, chain, furlong, mile, league, nautique.

CloneConvert
  • Mode
  • Clone : One clone of the objet(s) is create
  • Copy : One copy of the objet(s) is create
  • Coordinate X : Move the copy to the Coordinate X selected
  • Coordinate Y : Move the copy to the Coordinate Y selected
  • Coordinate Z : Move the copy to the Coordinate Z selected
  • Scale predefined
  • Scale predefined : predefined scales in units, km, hm, dam, m, dm, cm, mm, µm, nm, inch, link, foot, yard, perch, chain, furlong, mile, league, nautique
    or choose a free value in the Scale free field.
  • Scale free
  • Scale X : free scale , if the value is negative ( -10) , the object is scaled x 10 and will be reversed in the X axis, to reduce the shape give a decimal value (0,5)
  • ... : This button align the YZ values on the value of X to have the same values ​​XYZ (or manually)
  • Scale Y : free scale , if the value is negative ( -10) , the object is scaled x 10 and will be reversed in the Y axis, to reduce the shape give a decimal value (0,5)
  • Scale Z : free scale , if the value is negative ( -10) , the object is scaled x 10 and will be reversed in the Z axis, to reduce the shape give a decimal value (0,5)
  • Ok : the OK button validates and launches the command, if no object is selected the Ok button will be colored in red
  • Reset : the Reset button puts all the values to zero
  • Quit : the Quit button exit the macro


Script

Macro_CloneConvert.FCMacro

# -*- coding: utf-8 -*-
# CloneConvert.py
# Cree un clone ou une copie de l'objet ou des objets selectionne(s) et le met e l'echelle de la grandeur choisie
# utilisation : lancer CloneConvert selectionnez un objet choisissez la grandeur et cliquez sur OK
# 
# Creates a clone of one copy the selected object and updates the selected size range
# use: start CloneConvert select an object choose the size and click OK
#
#OS: Windows Vista
#Word size: 32-bit
#Version: 0.14.3700 (Git)
#Branch: releases/FreeCAD-0-14
#Hash: 32f5aae0a64333ec8d5d160dbc46e690510c8fe1
#Python version: 2.6.2
#Qt version: 4.5.2
#Coin version: 3.1.0
#SoQt version: 1.4.1
#OCC version: 6.5.1
#
# ver 0.3 31/07/2014 PyQt4 + PySide

__title__ = "CloneConvert"
__author__ = "mario52"

try:
    import PyQt4                     # PyQt4
    from PyQt4 import QtCore, QtGui  # PyQt4
except Exception:
    import PySide                    # PySide
    from PySide import QtCore, QtGui # PySide
import Draft, Part, FreeCAD, math, PartGui, FreeCADGui
from math import sqrt, pi, sin, cos, asin
from FreeCAD import Base
from decimal import *
from Draft import *
from FreeCAD import Vector, Rotation, Placement, Console

try:
    _fromUtf8 = QtCore.QString.fromUtf8
except AttributeError:
    def _fromUtf8(s):
        return s

try:
    _encoding = QtGui.QApplication.UnicodeUTF8
    def _translate(context, text, disambig):
        return QtGui.QApplication.translate(context, text, disambig, _encoding)
except AttributeError:
    def _translate(context, text, disambig):
        return QtGui.QApplication.translate(context, text, disambig)

global surface     ; surface     = 0.0
global volume_     ; volume_     = 0.0
global boundBox_   ; boundBox_   = 0.0
global boundBoxLX  ; boundBoxLX  = 0.0
global boundBoxLY  ; boundBoxLY  = 0.0
global boundBoxLZ  ; boundBoxLZ  = 0.0
global boundBox_S  ; boundBox_S  = ""
global uniteM_X    ; uniteM_X    = 1.0
global uniteM_Y    ; uniteM_Y    = 1.0
global uniteM_Z    ; uniteM_Z    = 1.0
global uniteM      ; uniteM      = 1.0
global uniteMs     ; uniteMs     = "mm"   # default mm
global placement_X ; placement_X = 0.0
global placement_Y ; placement_Y = 0.0
global placement_Z ; placement_Z = 0.0
global oripl_X     ; oripl_X     = 0.0
global oripl_Y     ; oripl_Y     = 0.0
global oripl_Z     ; oripl_Z     = 0.0
global sel         ; sel         = ""
global cloneCopy   ; cloneCopy   = 1

class Ui_MainWindow(object):

    def __init__(self, MainWindow):
#        path = FreeCAD.ConfigGet("AppHomePath")

        global uniteMs

        self.window = MainWindow
        MainWindow.setObjectName(_fromUtf8("MainWindow"))
        MainWindow.resize(230, 379)
        self.centralWidget = QtGui.QWidget(MainWindow)
        self.centralWidget.setObjectName(_fromUtf8("centralWidget"))
        self.label = QtGui.QLabel(self.centralWidget)
        self.label.setGeometry(QtCore.QRect(10, 10, 191, 16))
        self.label.setAlignment(QtCore.Qt.AlignCenter)
        self.label.setObjectName(_fromUtf8("label"))

        self.groupBox = QtGui.QGroupBox(self.centralWidget)
        self.groupBox.setGeometry(QtCore.QRect(10, 30, 211, 141))
        self.groupBox.setObjectName(_fromUtf8("groupBox"))

        self.doubleSpinBox = QtGui.QDoubleSpinBox(self.groupBox)
        self.doubleSpinBox.setGeometry(QtCore.QRect(100, 50, 101, 22))
        self.doubleSpinBox.setDecimals(7)
        self.doubleSpinBox.setMinimum(-10000000.0)
        self.doubleSpinBox.setMaximum(10000000.0)
        self.doubleSpinBox.setSingleStep(1.0)
        self.doubleSpinBox.setProperty("value", 0.0)
        self.doubleSpinBox.setObjectName(_fromUtf8("doubleSpinBox"))
        self.doubleSpinBox.valueChanged.connect(self.on_doubleSpinBox_valueChanged) #connection doubleSpinBox

        self.label_2 = QtGui.QLabel(self.groupBox)
        self.label_2.setGeometry(QtCore.QRect(10, 50, 91, 16))
        self.label_2.setObjectName(_fromUtf8("label_2"))

        self.label_3 = QtGui.QLabel(self.groupBox)
        self.label_3.setGeometry(QtCore.QRect(10, 80, 91, 16))
        self.label_3.setObjectName(_fromUtf8("label_3"))

        self.doubleSpinBox_2 = QtGui.QDoubleSpinBox(self.groupBox)
        self.doubleSpinBox_2.setGeometry(QtCore.QRect(100, 80, 101, 22))
        self.doubleSpinBox_2.setDecimals(7)
        self.doubleSpinBox_2.setMinimum(-10000000.0)
        self.doubleSpinBox_2.setMaximum(10000000.0)
        self.doubleSpinBox_2.setSingleStep(1.0)
        self.doubleSpinBox_2.setProperty("value", 0.0)
        self.doubleSpinBox_2.setObjectName(_fromUtf8("doubleSpinBox_2"))
        self.doubleSpinBox_2.valueChanged.connect(self.on_doubleSpinBox_2_valueChanged) #connection doubleSpinBox_2

        self.doubleSpinBox_3 = QtGui.QDoubleSpinBox(self.groupBox)
        self.doubleSpinBox_3.setGeometry(QtCore.QRect(100, 110, 101, 22))
        self.doubleSpinBox_3.setDecimals(7)
        self.doubleSpinBox_3.setMinimum(-10000000.0)
        self.doubleSpinBox_3.setMaximum(10000000.0)
        self.doubleSpinBox_3.setSingleStep(1.0)
        self.doubleSpinBox_3.setProperty("value", 0.0)
        self.doubleSpinBox_3.setObjectName(_fromUtf8("doubleSpinBox_3"))
        self.doubleSpinBox_3.valueChanged.connect(self.on_doubleSpinBox_3_valueChanged) #connection doubleSpinBox_3

        self.label_4 = QtGui.QLabel(self.groupBox)
        self.label_4.setGeometry(QtCore.QRect(10, 110, 91, 16))
        self.label_4.setObjectName(_fromUtf8("label_4"))

        self.radioButton = QtGui.QRadioButton(self.groupBox)
        self.radioButton.setGeometry(QtCore.QRect(10, 20, 71, 20))
        self.radioButton.setChecked(True)
        self.radioButton.setObjectName(_fromUtf8("radioButton"))
        self.radioButton.setToolTip(_translate("MainWindow", "Create a clone of the object(s)", None))
        self.radioButton.clicked.connect(self.on_radioButton_clicked)     #connection radioButton mode clone

        self.radioButton_2 = QtGui.QRadioButton(self.groupBox)
        self.radioButton_2.setGeometry(QtCore.QRect(100, 20, 71, 20))
        self.radioButton_2.setObjectName(_fromUtf8("radioButton_2"))
        self.radioButton_2.setToolTip(_translate("MainWindow", "Create a copy of the object(s)", None))
        self.radioButton_2.clicked.connect(self.on_radioButton_2_clicked) #connection radioButton_2 mode copy

        self.groupBox_2 = QtGui.QGroupBox(self.centralWidget)
        self.groupBox_2.setGeometry(QtCore.QRect(10, 170, 211, 51))
        self.groupBox_2.setObjectName(_fromUtf8("groupBox_2"))

        self.comboBox = QtGui.QComboBox(self.groupBox_2)
        self.comboBox.setGeometry(QtCore.QRect(10, 20, 191, 22))
        self.comboBox.setMinimumContentsLength(0)
        self.comboBox.setObjectName(_fromUtf8("comboBox"))
        self.comboBox.addItem(_fromUtf8(""))
        self.comboBox.addItem(_fromUtf8(""))
        self.comboBox.addItem(_fromUtf8(""))
        self.comboBox.addItem(_fromUtf8(""))
        self.comboBox.addItem(_fromUtf8(""))
        self.comboBox.addItem(_fromUtf8(""))
        self.comboBox.addItem(_fromUtf8(""))
        self.comboBox.addItem(_fromUtf8(""))
        self.comboBox.addItem(_fromUtf8(""))
        self.comboBox.addItem(_fromUtf8(""))
        self.comboBox.addItem(_fromUtf8(""))
        self.comboBox.addItem(_fromUtf8(""))
        self.comboBox.addItem(_fromUtf8(""))
        self.comboBox.addItem(_fromUtf8(""))
        self.comboBox.addItem(_fromUtf8(""))
        self.comboBox.addItem(_fromUtf8(""))
        self.comboBox.addItem(_fromUtf8(""))
        self.comboBox.addItem(_fromUtf8(""))
        self.comboBox.addItem(_fromUtf8(""))
        self.comboBox.setToolTip(_translate("MainWindow",u"Select unit. . .", None))
        QtCore.QObject.connect(self.comboBox, QtCore.SIGNAL("currentIndexChanged(QString)"), self.SIGNAL_comboBox_Changed)

        self.groupBox_3 = QtGui.QGroupBox(self.centralWidget)
        self.groupBox_3.setGeometry(QtCore.QRect(10, 220, 211, 111))
        self.groupBox_3.setObjectName(_fromUtf8("groupBox_3"))

        self.doubleSpinBox_4 = QtGui.QDoubleSpinBox(self.groupBox_3)
        self.doubleSpinBox_4.setGeometry(QtCore.QRect(100, 20, 101, 22))
        self.doubleSpinBox_4.setDecimals(7)
        self.doubleSpinBox_4.setMinimum(-1000000)
        self.doubleSpinBox_4.setMaximum(1000000.0)
        self.doubleSpinBox_4.setSingleStep(1.0)
        self.doubleSpinBox_4.setProperty("value", 1.0)
        self.doubleSpinBox_4.setObjectName(_fromUtf8("doubleSpinBox_4"))
        self.doubleSpinBox_4.setToolTip(_translate("MainWindow", "Scale free X multiplied by ...", None))
        self.doubleSpinBox_4.valueChanged.connect(self.on_doubleSpinBox_4_valueChanged) #connection doubleSpinBox_4

        self.doubleSpinBox_5 = QtGui.QDoubleSpinBox(self.groupBox_3)
        self.doubleSpinBox_5.setGeometry(QtCore.QRect(100, 50, 101, 22))
        self.doubleSpinBox_5.setDecimals(7)
        self.doubleSpinBox_5.setMinimum(-1000000)
        self.doubleSpinBox_5.setMaximum(1000000.0)
        self.doubleSpinBox_5.setSingleStep(1.0)
        self.doubleSpinBox_5.setProperty("value", 1.0)
        self.doubleSpinBox_5.setObjectName(_fromUtf8("doubleSpinBox_5"))
        self.doubleSpinBox_5.setToolTip(_translate("MainWindow", "Scale free Y multiplied by ...", None))
        self.doubleSpinBox_5.valueChanged.connect(self.on_doubleSpinBox_5_valueChanged) #connection doubleSpinBox_5

        self.doubleSpinBox_6 = QtGui.QDoubleSpinBox(self.groupBox_3)
        self.doubleSpinBox_6.setGeometry(QtCore.QRect(100, 80, 101, 22))
        self.doubleSpinBox_6.setDecimals(7)
        self.doubleSpinBox_6.setMinimum(-1000000)
        self.doubleSpinBox_6.setMaximum(1000000.0)
        self.doubleSpinBox_6.setSingleStep(1.0)
        self.doubleSpinBox_6.setProperty("value", 1.0)
        self.doubleSpinBox_6.setObjectName(_fromUtf8("doubleSpinBox_6"))
        self.doubleSpinBox_6.setToolTip(_translate("MainWindow", "Scale free Z multiplied by ...", None))
        self.doubleSpinBox_6.valueChanged.connect(self.on_doubleSpinBox_6_valueChanged) #connection doubleSpinBox_6

        self.label_5 = QtGui.QLabel(self.groupBox_3)
        self.label_5.setGeometry(QtCore.QRect(10, 20, 53, 16))
        self.label_5.setObjectName(_fromUtf8("label_5"))

        self.label_6 = QtGui.QLabel(self.groupBox_3)
        self.label_6.setGeometry(QtCore.QRect(10, 50, 53, 16))
        self.label_6.setObjectName(_fromUtf8("label_6"))

        self.label_7 = QtGui.QLabel(self.groupBox_3)
        self.label_7.setGeometry(QtCore.QRect(10, 80, 53, 16))
        self.label_7.setObjectName(_fromUtf8("label_7"))

        self.pushButton_3 = QtGui.QPushButton(self.groupBox_3)
        self.pushButton_3.setGeometry(QtCore.QRect(70, 20, 21, 21))
        self.pushButton_3.setToolTip(_fromUtf8("Align the Scale YZ to X"))
        self.pushButton_3.setObjectName(_fromUtf8("pushButton_3"))
        self.pushButton_3.clicked.connect(self.on_pushButton03_clicked) #connection pushButton03 "..." align YZ to X

        self.pushButton_2 = QtGui.QPushButton(self.centralWidget)
        self.pushButton_2.setGeometry(QtCore.QRect(152, 340, 71, 28))
        self.pushButton_2.setObjectName(_fromUtf8("pushButton_2"))
        self.pushButton_2.clicked.connect(self.on_pushButton02_clicked) #connection pushButton02 "Quitter"

        self.pushButton_1 = QtGui.QPushButton(self.centralWidget)
        self.pushButton_1.setGeometry(QtCore.QRect(10, 340, 71, 28))
        self.pushButton_1.setObjectName(_fromUtf8("pushButton_1"))
        self.pushButton_1.setStyleSheet("background-color: Base")
        self.pushButton_1.clicked.connect(self.on_pushButton01_clicked) #connection pushButton01 "OK"

        self.pushButton = QtGui.QPushButton(self.centralWidget)
        self.pushButton.setGeometry(QtCore.QRect(90, 340, 51, 28))
        self.pushButton.setObjectName(_fromUtf8("pushButton"))
        self.pushButton.clicked.connect(self.on_pushButton00_clicked)   #connection pushButton00 "Reset"

        MainWindow.setCentralWidget(self.centralWidget)

        self.retranslateUi(MainWindow)
        QtCore.QMetaObject.connectSlotsByName(MainWindow)

    def retranslateUi(self, MainWindow):
        MainWindow.setWindowTitle(_translate("MainWindow", "CloneConvert", None))
        try:
            MainWindow.setWindowFlags(PyQt4.QtCore.Qt.WindowStaysOnTopHint)  # cette fonction met la fenetre en avant
        except AttributeError:
            MainWindow.setWindowFlags(PySide.QtCore.Qt.WindowStaysOnTopHint)  # cette fonction met la fenetre en avant
        self.label.setText(_translate("MainWindow", "Object converter", None))
        self.groupBox.setTitle(_translate("MainWindow", "Mode", None))
        self.radioButton.setText(_translate("MainWindow", "Clone", None))
        self.radioButton_2.setText(_translate("MainWindow", "Copy", None))
        self.doubleSpinBox.setToolTip(_translate("MainWindow", "Place the new object to the X coordinate ", None))
        self.label_2.setText(_translate("MainWindow", "Coordinate X", None))
        self.label_3.setText(_translate("MainWindow", "Coordinate Y", None))
        self.doubleSpinBox_2.setToolTip(_translate("MainWindow", "Place the new object to the Y coordinate", None))
        self.doubleSpinBox_3.setToolTip(_translate("MainWindow", "Place the new object to the Z coordinate", None))
        self.label_4.setText(_translate("MainWindow", "Coordinate Z", None))
        self.groupBox_2.setTitle(_translate("MainWindow", "Scale predefined", None))
        self.comboBox.setToolTip(_translate("MainWindow", "Convert your object to . . .", None))
        self.comboBox.setCurrentIndex(6)
        self.comboBox.setItemText(0, _translate("MainWindow", "km", None))         #km #        = 1000000
        self.comboBox.setItemText(1, _translate("MainWindow", "hm", None))         #hm #        = 100000
        self.comboBox.setItemText(2, _translate("MainWindow", "dam", None))        #dam#        = 10000
        self.comboBox.setItemText(3, _translate("MainWindow", "m", None))          #m  #        = 1000
        self.comboBox.setItemText(4, _translate("MainWindow", "dm", None))         #dm #        = 100
        self.comboBox.setItemText(5, _translate("MainWindow", "cm", None))         #cm #        = 10
        self.comboBox.setItemText(6, _translate("MainWindow", "mm", None))         #mm #        = 1        #####
        self.comboBox.setItemText(7, _translate("MainWindow", "µm", None))         #µm # micro  = 0.001
        self.comboBox.setItemText(8, _translate("MainWindow", "nm", None))         #nm # nano   = 0.000001
        self.comboBox.setItemText(9, _translate("MainWindow", "inch", None))       #in # inch  pouce    = 25.400
        self.comboBox.setItemText(10, _translate("MainWindow", "link", None))      #lk # link  chainon  = 201.168
        self.comboBox.setItemText(11, _translate("MainWindow", "foot", None))      #ft # foot  pied     = 304.800
        self.comboBox.setItemText(12, _translate("MainWindow", "yard", None))      #yd # yard  verge    = 914.400
        self.comboBox.setItemText(13, _translate("MainWindow", "perch", None))     #rd # rod ou perch   perche   = 5029.200
        self.comboBox.setItemText(14, _translate("MainWindow", "chain", None))     #ch # chain chaine   = 20116.800
        self.comboBox.setItemText(15, _translate("MainWindow", "furlong", None))   #fur# furlong        = 201168
        self.comboBox.setItemText(16, _translate("MainWindow", "mile", None))      #mi # mile           = 1609344
        self.comboBox.setItemText(17, _translate("MainWindow", "league", None))    #lea# league lieue   = 4828032
        self.comboBox.setItemText(18, _translate("MainWindow", "nautique", None))  #nmi# mile nautique  = 1852000
        self.groupBox_3.setTitle(_translate("MainWindow", "Scale free", None))
        self.label_5.setText(_translate("MainWindow", "Scale X", None))
        self.label_6.setText(_translate("MainWindow", "Scale Y", None))
        self.label_7.setText(_translate("MainWindow", "Scale Z", None))
        self.pushButton_3.setToolTip(_translate("MainWindow", "Align the YZ scale values ??to X scale value ", None))
        self.pushButton_3.setText(_translate("MainWindow", "...", None))
        self.pushButton_2.setToolTip(_translate("MainWindow", "Quit the macro", None))
        self.pushButton_2.setText(_translate("MainWindow", "Quit", None))
        self.pushButton_1.setToolTip(_translate("MainWindow", "Ok for Convert or copy", None))
        self.pushButton_1.setText(_translate("MainWindow", "Ok", None))
        self.pushButton.setToolTip(_translate("MainWindow", "Reset", None))
        self.pushButton.setText(_translate("MainWindow", "Reset", None))

    def SIGNAL_comboBox_Changed(self,text):
        global uniteM_X
        global uniteM_Y
        global uniteM_Z
        global uniteM
        global uniteMs

        try:
            text = unicode(text, 'ISO-8859-1').encode('UTF-8')  # PyQt4
        except Exception:
            text = text.encode('utf-8')                         # PySide

        if text == "km":        #        = 1000000
            uniteM = uniteM_X = uniteM_Y = uniteM_Z = 1000000.0
            uniteMs= "km"
        elif text == "hm":      #        = 100000
            uniteM = uniteM_X = uniteM_Y = uniteM_Z = 100000.0
            uniteMs= "hm"
        elif text == "dam":     #        = 10000
            uniteM = uniteM_X = uniteM_Y = uniteM_Z = 10000.0
            uniteMs= "dam"
        elif text == "m":       #        = 1000
            uniteM = uniteM_X = uniteM_Y = uniteM_Z = 1000.0
            uniteMs= "m"
        elif text == "dm":      #        = 100
            uniteM = uniteM_X = uniteM_Y = uniteM_Z = 100.0
            uniteMs= "dm"
        elif text == "cm":      #        = 10
            uniteM = uniteM_X = uniteM_Y = uniteM_Z = 10.0
            uniteMs= "cm"
        elif text == "mm":      #        = 1  ###############################
            uniteM = uniteM_X = uniteM_Y = uniteM_Z = 1.0
            uniteMs= "mm"
        elif text == "µm":      #        = 1000
            uniteM = uniteM_X = uniteM_Y = uniteM_Z = 1.0/1000.0
            uniteMs= u"µm"
        elif text == "nm":      #        = 1000000
            uniteM = uniteM_X = uniteM_Y = uniteM_Z = 1.0/1000000.0
            uniteMs= u"nm"
        elif text == "inch":    # inch   = 25.400
            uniteM = uniteM_X = uniteM_Y = uniteM_Z = 25.400
            uniteMs= "in"
        elif text == "link":    # link   = 201.168
            uniteM = uniteM_X = uniteM_Y = uniteM_Z = 201.168
            uniteMs= "lk"
        elif text == "foot":    # foot   = 304.800
            uniteM = uniteM_X = uniteM_Y = uniteM_Z = 304.800
            uniteMs= "ft"
        elif text == "yard":    # yard   = 914.400
            uniteM = uniteM_X = uniteM_Y = uniteM_Z = 914.400
            uniteMs= "yd"
        elif text == "perch":   #rd # rod   perche    = 5029.200
            uniteM = uniteM_X = uniteM_Y = uniteM_Z = 5029.200
            uniteMs= "rd"
        elif text == "chain":   # chain  = 20116.800
            uniteM = uniteM_X = uniteM_Y = uniteM_Z = 20116.800
            uniteMs= "ch"
        elif text == "furlong": # furlong= 201168
            uniteM = uniteM_X = uniteM_Y = uniteM_Z = 201168
            uniteMs= "fur"
        elif text == "mile":     # mile   = 1609344
            uniteM = uniteM_X = uniteM_Y = uniteM_Z = 1609344
            uniteMs= "mi"
        elif text == "league":   # league = 4828032
            uniteM = uniteM_X = uniteM_Y = uniteM_Z = 4828032
            uniteMs= "lea"
        elif text == "nautique": # nautique = 1852000
            uniteM = uniteM_X = uniteM_Y = uniteM_Z = 1852000
            uniteMs= "nmi"
        else:                    # mm = 1
            uniteM = uniteM_X = uniteM_Y = uniteM_Z = 1.0 
            uniteMs= "mm"
            
        self.doubleSpinBox_4.setProperty("value", uniteM_X)
        self.doubleSpinBox_5.setProperty("value", uniteM_Y)
        self.doubleSpinBox_6.setProperty("value", uniteM_Z)

    def on_radioButton_clicked(self):                    # if checked then mode clone
        global cloneCopy
        cloneCopy = 1

    def on_radioButton_2_clicked(self):                  # if checked then mode copy
        global cloneCopy
        cloneCopy = 0

    def on_doubleSpinBox_valueChanged(self,value):       # doubleSpinbox X
        global placement_X
        placement_X = value

    def on_doubleSpinBox_2_valueChanged(self,value):     # doubleSpinbox Y 
        global placement_Y
        placement_Y = value

    def on_doubleSpinBox_3_valueChanged(self,value):     #  doubleSpinbox Z
        global placement_Z
        placement_Z = value

    def on_doubleSpinBox_4_valueChanged(self,value):     # doubleSpinbox free X
        global uniteM_X
        uniteM_X = value
        if uniteM_X == 0:
            uniteM_X = 1

    def on_doubleSpinBox_5_valueChanged(self,value):     # doubleSpinbox free Y 
        global uniteM_Y
        uniteM_Y = value
        if uniteM_Y == 0:
            uniteM_Y = 1

    def on_doubleSpinBox_6_valueChanged(self,value):     #  doubleSpinbox free Z
        global uniteM_Z
        uniteM_Z = value
        if uniteM_Z == 0:
            uniteM_Z = 1

    def on_pushButton03_clicked(self):                   # Bouton ... (align)
        global uniteM_X
        global uniteM_Y
        global uniteM_Z
        global uniteM
        global uniteMs
        uniteM_Y = uniteM_Z = uniteM_X
        self.doubleSpinBox_5.setProperty("value", uniteM_X)
        self.doubleSpinBox_6.setProperty("value", uniteM_X)

    def on_pushButton00_clicked(self):                   # Bouton Reset
        global uniteM_X
        global uniteM_Y
        global uniteM_Z
        global uniteM
        global uniteMs
        global placement_X
        global placement_Y
        global placement_Z
        global oripl_X
        global oripl_Y
        global oripl_Z
        global cloneCopy

        oripl_X = oripl_Y = oripl_Z = 0.0

        self.pushButton_1.setToolTip(_translate("MainWindow", "Ok for Convert or copy", None))
        self.pushButton_1.setStyleSheet("background-color: Base")

        self.radioButton.setChecked(True)
        cloneCopy = 1

        self.comboBox.setCurrentIndex(6)
        self.doubleSpinBox.setProperty("value",   0.0)
        self.doubleSpinBox_2.setProperty("value", 0.0)
        self.doubleSpinBox_3.setProperty("value", 0.0)

        placement_X = placement_Y = placement_Z = 0.0

        self.doubleSpinBox_4.setProperty("value", 1.0)
        self.doubleSpinBox_5.setProperty("value", 1.0)
        self.doubleSpinBox_6.setProperty("value", 1.0)

        uniteM = uniteM_X = uniteM_Y = uniteM_Z = 1.0
        uniteMs= "mm"
        uniteM = 1

    def on_pushButton01_clicked(self):                   # Bouton OK
        global surface
        global volume_
        global boundBox
        global boundBoxLX
        global boundBoxLY
        global boundBoxLZ
        global boundBox_S
        global uniteM_X
        global uniteM_Y
        global uniteM_Z
        global uniteM
        global uniteMs
        global placement_X
        global placement_Y
        global placement_Z
        global oripl_X
        global oripl_Y
        global oripl_Z
        global sel

        sel = FreeCADGui.Selection.getSelection()   

        if len(sel) != 0:

            self.pushButton_1.setToolTip(_translate("MainWindow", "Ok for Convert or copy", None))
            self.pushButton_1.setStyleSheet("background-color: Base")

             # boundinbox (dimensions hors tout)
            try:
                boundBox_ = sel[0].Shape.BoundBox # pour 1 seul objet, (le premier)
                boundBoxLX = boundBox_.XLength
                boundBoxLY = boundBox_.YLength
                boundBoxLZ = boundBox_.ZLength
            except:
                boundBox_  = 0.0
                boundBoxLX = 0.0
                boundBoxLY = 0.0
                boundBoxLZ = 0.0
                boundBox_S = ""

             # volume de tous les objets
            volume_ = 0.0
            try:
                for i in range(len(sel)):
                    volume_ += sel[i].Shape.Volume
            except:
                volume_ = 0.0

             # surface de tous les objets
            surface = 0.0
            try:
                for i in range(len(sel)):
                    surface += sel[i].Shape.Area
            except:
                surface = 0.0

            boundBox_S = "[X: "+str(boundBoxLX)+" mm] x [Y: "+str(boundBoxLY)+" mm] x [Z:"+str(boundBoxLZ)+" mm]"
            App.Console.PrintMessage("Original boundBox : "+boundBox_S+"\r\n")
            App.Console.PrintMessage("Original volume_  : "+str(volume_)+" mm3 ("+str(len(sel))+" element(s))"+"\r\n")
            App.Console.PrintMessage("Original surface  : "+str(surface)+" mm2 ("+str(len(sel))+" element(s))"+"\r\n")
            App.Console.PrintMessage("- - - - - - - - - -"+"\r\n")

            oripl_X = sel[0].Placement.Base[0]
            oripl_Y = sel[0].Placement.Base[1]
            oripl_Z = sel[0].Placement.Base[2]

            obj = ""
            if cloneCopy == 1:       # clone ok
                obj=Draft.clone(sel)
                mess = "Clone"
                ###
                if len(sel) > 1:     # one object
                    obj.Placement=App.Placement(App.Vector(placement_X,placement_Y,placement_Z), App.Rotation(App.Vector(0,0,1),0), App.Vector(0,0,0))
                else:                # many objects
                    obj.Placement=App.Placement(App.Vector(oripl_X + placement_X,oripl_Y + placement_Y,oripl_Z + placement_Z), App.Rotation(sel[0].Placement.Rotation), App.Vector(0,0,0))
                obj.Scale = (uniteM_X, uniteM_Y, uniteM_Z)
                ###
            else:                     # copy ok
                mess = "Copy "
                obj = Draft.scale(sel,delta=App.Vector(uniteM_X, uniteM_Y, uniteM_Z),center=App.Vector(0,0,0),copy=True,legacy=True)
                mydistance = FreeCAD.Vector(oripl_X + placement_X,oripl_Y + placement_Y,oripl_Z + placement_Z)
                move(obj,mydistance)

            FreeCAD.ActiveDocument.recompute()
            ####

             # boundinbox (dimensions hors tout)
            try:
                boundBox_ = obj.Shape.BoundBox
                boundBoxLX = boundBox_.XLength
                boundBoxLY = boundBox_.YLength
                boundBoxLZ = boundBox_.ZLength
            except:
                boundBox_  = 0.0
                boundBoxLX = 0.0
                boundBoxLY = 0.0
                boundBoxLZ = 0.0

             # volume
            volume_ = 0.0
            try:
                volume_ = obj.Shape.Volume
            except:
                for i in range(len(obj)):
                    volume_ += obj[i].Shape.Volume

             # surface
            surface = 0.0
            try:
                surface = obj.Shape.Area
            except:
                for i in range(len(obj)):
                    surface += obj[i].Shape.Area

            App.Console.PrintMessage("Convert mm in ' "+uniteMs+" ' (1 "+uniteMs+" = "+str(uniteM)+" mm)"+"\r\n")
            App.Console.PrintMessage(mess + " boundBox_X  : "+str(boundBoxLX)+" mm"+"\r\n")
            App.Console.PrintMessage(mess + " boundBox_Y  : "+str(boundBoxLY)+" mm"+"\r\n")
            App.Console.PrintMessage(mess + " boundBox_Z  : "+str(boundBoxLZ)+" mm"+"\r\n")
            App.Console.PrintMessage(mess + " volume      : "+str(volume_)+" mm3 ("+str(len(sel))+" element(s))"+"\r\n")#
            App.Console.PrintMessage(mess + " surface     : "+str(surface)+" mm2 ("+str(len(sel))+" element(s))"+"\r\n")#
            App.Console.PrintMessage("___________________"+"\r\n")
            self.pushButton_1.setStyleSheet("background-color: green")

        else:
            self.pushButton_1.setStyleSheet("background-color: red")#red
            self.pushButton_1.setToolTip(_translate("MainWindow", "Not object selected for Convert or copy", None))
            FreeCAD.Console.PrintError("Select an object"+"\r\n")   #App.Console.PrintMessage
            sel = ""

    def on_pushButton02_clicked(self):                   # Bouton Quitter
        App.Console.PrintMessage("End CloneConvert\r\n")
        self.window.hide()

sel = FreeCADGui.Selection.getSelection()   

MainWindow = QtGui.QMainWindow()
ui = Ui_MainWindow(MainWindow)
MainWindow.show()

Revision

02/07/2014 ver. 0.3 = modified to operate PyQt4 and PySide 09/05/2014 ver. 0.2 = adding function "Copy"

Other languages:
Deutsch • ‎English • ‎français • ‎italiano