Macro Animated Constrain
|
|
| Description |
|---|
| Animer une contrainte dans une esquisse dans FreeCAD Version macro : 1.0 Date dernière modification : 2015-05-20 Version FreeCAD : All Téléchargement : Icône de la barre d'outils Pas de fichier pour les essais Voir l'animation sur YouTube. Auteur: psicofil |
| Auteur |
| psicofil |
| Téléchargement |
| Icône de la barre d'outils Pas de fichier pour les essais Voir l'animation sur YouTube. |
| Liens |
| Page des macros Comment installer une macro Comment créer une barre d'outils |
| Version Macro |
| 1.0 |
| Dernière modification |
| 2015-05-20 |
| Version(s) FreeCAD |
| All |
| Raccourci clavier |
| None |
| Voir aussi |
| None |
Description
Macro simple pour animer les contraintes d'angles dans Sketcher. Basée sur le travail de @microelly. Animez une contrainte et examinez les effets obtenus.
Temporary code for external macro link. Do not use this code. This code is used exclusively by Addon Manager. Link for optional manual installation: Macro
# This code is copied instead of the original macro code
# to guide the user to the online download page.
# Use it if the code of the macro is larger than 64 KB and cannot be included in the wiki
# or if the RAW code URL is somewhere else in the wiki.
from PySide import QtGui, QtCore
diag = QtGui.QMessageBox(QtGui.QMessageBox.Information,
"Information",
"This macro must be downloaded from this link\n"
"\n"
"https://raw.githubusercontent.com/psicofil/Macros_FreeCAD/master/Macros/AnimatedConstrain.FCMacro" + "\n"
"\n"
"Quit this window to access the download page")
diag.setWindowFlags(QtCore.Qt.WindowStaysOnTopHint)
diag.setWindowModality(QtCore.Qt.ApplicationModal)
diag.exec_()
import webbrowser
webbrowser.open("https://raw.githubusercontent.com/psicofil/Macros_FreeCAD/master/Macros/AnimatedConstrain.FCMacro")
Script
La macro peut être téléchargée dans le dépôt github suivant: Macro_Animated_Constrain.FCMacro
Icône de la barre d'outils 
AnimatedConstrain.FCMacro
# -*- coding: utf-8 -*-
# Mesh with GMSH inside of FreeCAD
# Author: Gomez Lucio
# License: LGPL v 2.1
# Date: 17/05/2015
import FreeCAD
from PySide import QtGui,QtCore
import math
import time
class AnimConstrain(QtGui.QWidget):
def __init__(self):
super(AnimConstrain, self).__init__()
self.initUI()
def initUI(self):
# Window
self.setWindowFlags(QtCore.Qt.WindowStaysOnTopHint)
self.setWindowTitle("Animated Constrain")
self.resize(240, 240)
# Content
self.l_initial = QtGui.QLabel(" Initital (deg)",self)
self.le_initial = QtGui.QLineEdit(self)
self.le_initial.setText("0")
self.l_final = QtGui.QLabel(" Final (deg)",self)
self.le_final = QtGui.QLineEdit(self)
self.le_final.setText("360")
self.l_interval = QtGui.QLabel(" Interval (deg/step) ",self)
self.le_interval = QtGui.QLineEdit(self)
self.le_interval.setText("5")
# Constrain Type
self.l_type_constrain = QtGui.QLabel("<b>Type of Constrain :<b>",self)
self.rb_angle = QtGui.QRadioButton(" Angle(deg)",self)
self.rb_angle.setChecked(QtCore.Qt.Checked)
self.rb_length = QtGui.QRadioButton(" Length(mm)",self)
self.rb_length.setEnabled(False)
# Parameters
self.l_parameters = QtGui.QLabel("<b>Parameters :<b>",self)
self.cb_repeat = QtGui.QCheckBox(" Repeat",self)
self.bt_start = QtGui.QPushButton("Start",self)
self.bt_stop = QtGui.QPushButton("Stop",self)
# LAYOUT
layout = QtGui.QGridLayout()
layout.addWidget(self.l_type_constrain, 0, 0)
layout.addWidget(self.rb_angle, 1, 0)
layout.addWidget(self.rb_length, 1, 1)
layout.addWidget(self.l_parameters, 2, 0)
layout.addWidget(self.l_initial, 3, 0)
layout.addWidget(self.le_initial, 3, 1)
layout.addWidget(self.l_final, 4, 0)
layout.addWidget(self.le_final, 4, 1)
layout.addWidget(self.l_interval, 5, 0)
layout.addWidget(self.le_interval, 5, 1)
layout.addWidget(self.cb_repeat, 6, 0)
layout.addWidget(self.bt_start, 7, 0)
layout.addWidget(self.bt_stop, 7, 1)
self.setLayout(layout)
self.show()
# CONNECTS
QtCore.QObject.connect(self.bt_start, QtCore.SIGNAL("pressed()"),self.start)
QtCore.QObject.connect(self.bt_stop, QtCore.SIGNAL("pressed()"),self.stop)
self.cb_repeat.stateChanged.connect(self.repeat_state)
self.repeat = True
def repeat_state(self, state):
if state == QtCore.Qt.Checked:
self.repeat = False
else:
self.repeat = True
def start(self):
App.Console.PrintMessage('Start ')
self.timer = QtCore.QTimer()
QtCore.QObject.connect(self.timer, QtCore.SIGNAL("timeout()"), self.proceed)
self.timer.start(50)
self.an = float(eval(self.le_initial.text()))
self.interv = float(eval(self.le_interval.text()))
self.final = float(eval(self.le_final.text()))
#self.proceed()
def proceed(self):
if self.an >= self.final and self.repeat:
self.stop()
else:
try:
self.an = self.an + self.interv if self.an < (360.0) else 0.0
angle = self.an
App.Console.PrintMessage(str(angle)+" ")
App.ActiveDocument.Sketch.setDatum(cs,App.Units.Quantity((str(angle)+' deg')))
App.ActiveDocument.recompute()
except:
App.Console.PrintError('Error on setDatum in constrain ')
self.stop()
def stop(self):
self.timer.stop()
App.Console.PrintMessage(" End")
App.ActiveDocument.recompute()
# RUN WIDGET
try:
s = Gui.Selection.getSelectionEx()
cs=s[0].SubElementNames[0]
cs=int(cs[10:])-1
AnimConstrain()
except:
App.Console.PrintError('Select one anlge constrain First ')
Liens
La page de discussion sur le forum Macro Animated Constrain