Introduction to Python
This is a short tutorial for those new to Python. Python is an open-source, multiplatform programming language. It has several features that make it different from other programming languages, and very accessible to new users:
- It has been designed to be to readable by human beings, making it relatively easy to learn and understand.
- It is interpreted, this means that programs do not need to be compiled before they can be executed. Python code can be executed immediately, even line by line if you wish.
- It can be embedded in other programs as a scripting language. FreeCAD has an embedded Python interpreter. You can write Python code to manipulate parts of FreeCAD. This is very powerful, it means you can build your very own tools.
- It is extensible, you can easily plug new modules into your Python installation and extend its functionality. For example, there are modules that allow Python to read and write images, to communicate with Twitter, to schedule tasks to be performed by your operating system, etc.
The following is a very basic introduction, and by no means a complete tutorial. But hopefully it will provide a good starting point for further exploration into FreeCAD and its mechanisms. We strongly encourage you to enter the code snippets below into a Python interpreter.
Usually when writing computer programs, you open a text editor or your special programming environment (which is basically a text editor with some additional tools), write your program, then compile and execute. Often one or more errors were made during entry, so your program won't work. You may even get an error message telling you what went wrong. Then you go back to your text editor, correct the mistakes, run again, repeating until your program works as intended.
In Python that whole process can be done transparently inside the Python interpreter. The interpreter is a Python window with a command prompt, where you can simply type Python code. If you have installed Python on your computer (download it from the Python website if you are on Windows or Mac, install it from your package repository if you are on GNU/Linux), you will have a Python interpreter in your start menu. But, as already mentioned, FreeCAD also has a built-in Python interpreter: the Python console.
The FreeCAD Python console
If you don't see it, click on View → Panels → Python console. The Python console can be resized and also undocked.
The interpreter shows the Python version, then a
>>> symbol which is the command prompt. Writing code in the interpreter is simple: one line is one instruction. When you press , your line of code will be executed (after being instantly and invisibly compiled). For example, try writing this:
print() is a Python command that, obviously, prints something on the screen. When you press , the operation is executed, and the message
"hello" is printed. If you make an error, for example let's write:
Python will immediately tell you so. In this case Python doesn't know what
hello is. The
" " characters specify that the content is a string, programming jargon for a piece of text. Without these the
print() command doesn't recognize
hello. By pressing the up arrow you can go back to the last line of code and correct it.
The Python interpreter also has a built-in help system. Let's say we don't understand what went wrong with
print(hello) and we want specific information about the command:
You'll get a long and complete description of everything the
print() command can do.
Now that you understand the Python interpreter, we can continue with the more serious stuff.
Very often in programming you need to store a value under a name. That's where variables come in. For example, type this:
a = "hello" print(a)
You probably understand what happened here, we saved the string
"hello" under the name
a. Now that
a is known we can use it anywhere, for example in the
print() command. We can use any name we want, we just need to follow some simple rules, such as not using spaces or punctuation and not using Python keywords. For example, we can write:
hello = "my own version of hello" print(hello)
hello is not an undefined any more. Variables can be modified at any time, that's why they are called variables, their content can vary. For example:
myVariable = "hello" print(myVariable) myVariable = "good bye" print(myVariable)
We changed the value of
myVariable. We can also copy variables:
var1 = "hello" var2 = var1 print(var2)
It is advisable to give meaningful names to your variables. After a while you won't remember what your variable named
a represents. But if you named it, for example,
myWelcomeMessage you'll easily remember its purpose. Plus your code is a step closer to being self-documenting.
Case is very important,
myVariable is not the same as
myvariable. If you were to enter
print(myvariable) it would come back with an error as not defined.
Of course Python programs can deal with all kinds of data, not just text strings. One thing is important, Python must know what kind of data it is dealing with. We saw in our print hello example, that the
print() command recognized our
"hello" string. By using
" " characters, we specified that what follows is a text string.
We can always check the data type of a variable with the
myVar = "hello" type(myVar)
It will tell us the content of
myVar is a
'str', which is short for string. We also have other basic data types such as integer and float numbers:
firstNumber = 10 secondNumber = 20 print(firstNumber + secondNumber) type(firstNumber)
Python knows that 10 and 20 are integer numbers, so they are stored as
'int', and Python can do with them everything it can do with integers. Look at the results of this:
firstNumber = "10" secondNumber = "20" print(firstNumber + secondNumber)
Here we forced Python to consider that our two variables are not numbers but pieces of text. Python can add two pieces of text together, although in that case, of course, it won't perform any arithmetic. But we were talking about integer numbers. There are also float numbers. The difference is float numbers can have a decimal part and integer numbers do not:
var1 = 13 var2 = 15.65 print("var1 is of type ", type(var1)) print("var2 is of type ", type(var2))
Integers and floats can be mixed together without problems:
total = var1 + var2 print(total) print(type(total))
var2 is a float Python automatically decides that the result must also be a float. But there are cases where Python does not knows what type to use. For example:
varA = "hello 123" varB = 456 print(varA + varB)
This results in an error,
varA is a string and
varB is an integer, and Python doesn't know what to do. However, we can force Python to convert between types:
varA = "hello" varB = 123 print(varA + str(varB))
Now that both variables are strings the operation works. Note that we "stringified"
varB at the time of printing, but we didn't change
varB itself. If we wanted to turn
varB permanently into a string, we would need to do this:
varB = str(varB)
We can also use
float() to convert to integer and float if we want:
varA = "123" print(int(varA)) print(float(varA))
You must have noticed that we have used the
print() command in several ways. We printed variables, sums, several things separated by commas, and even the result of another Python command. Maybe you also saw that these two commands:
have the same result. This is because we are in the interpreter, and everything is automatically printed. When we write more complex programs that run outside the interpreter, they won't print automatically, so we'll need to use the
print() command. With that in mind let's stop using it here. From now on we will simply write:
myVar = "hello friends" myVar
Another useful data type is a list. A list is a collection of other data. To define a list we use
myList = [1, 2, 3] type(myList) myOtherList = ["Bart", "Frank", "Bob"] myMixedList = ["hello", 345, 34.567]
As you can see a list can contain any type of data. You can do many things with a list. For example, count its items:
Or retrieve one item:
myName = myOtherList myFriendsName = myOtherList
len() command returns the total number of items in a list, the first item in a list is always at position
0, so in our
"Bob" will be at position
2. We can do much more with lists such as sorting items and removing or adding items.
Interestingly a text string is very similar to a list of characters in Python. Try doing this:
myvar = "hello" len(myvar) myvar
Usually what you can do with lists can also be done with strings. In fact both lists and strings are sequences.
Apart from strings, integers, floats and lists, there are more built-in data types, such as dictionaries, and you can even create your own data types with classes.
One important use of lists is the ability to "browse" through them and do something with each item. For example look at this:
alldaltons = ["Joe", "William", "Jack", "Averell"] for dalton in alldaltons: print(dalton + " Dalton")
We iterated (programming jargon) through our list with the
for in command and did something with each of the items. Note the special syntax: the
for command terminates with
: indicating the following will be a block of one of more commands. In the interpreter, immediately after you enter the command line ending with
:, the command prompt will change to
... which means Python knows that there is more to come.
How will Python know how many of the next lines will need to be executed inside the
for in operation? For that, Python relies on indentation. The next lines must begin with a blank space, or several blank spaces, or a tab, or several tabs. And as long as the indentation stays the same the lines will be considered part of the
for in block. If you begin one line with 2 spaces and the next one with 4, there will be an error. When you have finished, just write another line without indentation, or press to come back from the
for in block
Indentation also aids in program readability. If you use large indentations (for example use tabs instead of spaces) when you write a big program, you'll have a clear view of what is executed inside what. We'll see that other commands use indented blocks of code as well.
for in command can be used for many things that must be done more than once. It can, for example, be combined with the
serie = range(1, 11) total = 0 print("sum") for number in serie: print(number) total = total + number print("----") print(total)
If you have been running the code examples in an interpreter by copy-pasting, you will find the previous block of text will throw an error. Instead, copy to the end of the indented block, i.e. the end of the line
total = total + number and then paste in the interpreter. In the interpreter press until the three dot prompt disappears and the code runs. Then copy the final two lines followed by another . The final answer should appear.
If you type into the interpreter
help(range) you will see:
range(...) range(stop) -> list of integers range(start, stop[, step]) -> list of integers
Here the square brackets denote an optional parameter. However all are expected to be integers. Below we will force the step parameter to be an integer using
number = 1000 for i in range(0, 180 * number, int(0.5 * number)): print(float(i) / number)
alldaltons = ["Joe", "William", "Jack", "Averell"] for n in range(4): print(alldaltons[n], " is Dalton number ", n)
range() command also has that strange particularity that it begins with
0 (if you don't specify the starting number) and that its last number will be one less than the ending number you specify. That is, of course, so it works well with other Python commands. For example:
alldaltons = ["Joe", "William", "Jack", "Averell"] total = len(alldaltons) for n in range(total): print(alldaltons[n])
Another interesting use of indented blocks is with the
if command. This command executes a code block only if a certain condition is met, for example:
alldaltons = ["Joe", "William", "Jack", "Averell"] if "Joe" in alldaltons: print("We found that Dalton!!!")
Of course this will always print the sentence, but try replacing the second line with:
if "Lucky" in alldaltons:
Then nothing is printed. We can also specify an
alldaltons = ["Joe", "William", "Jack", "Averell"] if "Lucky" in alldaltons: print("We found that Dalton!!!") else: print("Such Dalton doesn't exist!")
There are very few standard Python commands and we already know several of them. But you can create your own commands. In fact, most of the additional modules that you can plug into your Python installation do just that, they add commands that you can use. A custom command in Python is called a function and is made like this:
def printsqm(myValue): print(str(myValue) + " square meters") printsqm(45)
def() command defines a new function, you give it a name, and inside the parenthesis you define the arguments that the function will use. Arguments are data that will be passed to the function. For example, look at the
len() command. If you just write
len(), Python will tell you it needs an argument. Which is obvious: you want to know the length of something. If you write
myList is the argument that you pass to the
len() function. And the
len() function is defined in such a way that it knows what to do with this argument. We have done the same thing with our
myValue name can be anything, and it will only be used inside the function. It is just a name you give to the argument so you can do something with it. By defining arguments you also to tell the function how many to expect. For example, if you do this:
there will be an error. Our function was programmed to receive just one argument, but it received two,
34. Let's try another example:
def sum(val1, val2): total = val1 + val2 return total myTotal = sum(45, 34)
Here we made a function that receives two arguments, sums them, and returns that value. Returning something is very useful, because we can do something with the result, such as store it in the
Now that you have a good idea of how Python works, you will need to know one more thing: How to work with files and modules.
Until now, we have written Python instructions line by line in the interpreter. This method is obviously not suitable for larger programs. Normally the code for Python programs is stored in files with the .py extension. Which are just plain text files and any text editor (Linux gedit, emacs, vi or even Windows Notepad) can be used to create and edit them.
There are several of ways to execute a Python program. In Windows, simply right-click your file, open it with Python, and execute it. But you can also execute it from the Python interpreter itself. For this, the interpreter must know where your program is. In FreeCAD the easiest way is to place your program in a folder that FreeCAD's Python interpreter knows by default, such as FreeCAD's user Mod folder:
- On Linux it is usually /home/<username>/.FreeCAD/Mod/.
- On Windows it is %APPDATA%\FreeCAD\Mod\, which is usually C:\Users\<username>\Appdata\Roaming\FreeCAD\Mod\.
- On Mac OSX it is usually /Users/<username>/Library/Preferences/FreeCAD/Mod/.
Let's add a subfolder there called scripts and then write a file like this:
def sum(a,b): return a + b print("myTest.py succesfully loaded")
Save the file as myTest.py in the scripts folder, and in the interpreter window write:
without the .py extension. This will execute the contents of the file, line by line, just as if we had written it in the interpreter. The sum function will be created, and the message will be printed. Files containing functions, like ours, are called modules.
When we write a
sum() function in the interpreter, we execute it like this:
But when we import a module containing a
sum() function the syntax is a bit different:
That is, the module is imported as a "container", and all its functions are inside that container. This is very useful, because we can import a lot of modules, and keep everything well organized. Basically when you see
something.somethingElse, with a dot in between, then this means
somethingElse is inside
We can also import our sum() function directly into the main interpreter space:
from myTest import * sum(12, 54)
Almost all modules do that: they define functions, new data types and classes that you can use in the interpreter or in your own Python modules, because nothing prevents you from importing other modules inside your module!
How do we know what modules we have, what functions are inside and how to use them (that is, what kind of arguments they need)? We have already seen that Python has a
help() function. Doing:
will give us a list of all available modules. We can import any of them and browse their content with the
import math dir(math)
We'll see all the functions contained in the
math module, as well as strange stuff named
__name__. Every function in a well made module has a
__doc__ that explains how to use it. For example, we see that there is a
sin() function inside the math module. Want to know how to use it?
It may not be evident, but on either side of
doc are two underscore characters.
And finally one last tip: When working on new or existing code, it is better to not use the FreeCAD macro file extension, .FCMacro, but instead use the standard .py extension. This is because Python doesn't recognize the .FCMacro extension. If you use .py your code can be easily loaded with
import, as we have already seen, and also reloaded with
import importlib importlib.reload(myTest)
There is however an alternative:
Starting with FreeCAD
Hopefully you now have a good idea of how Python works, and you can start exploring what FreeCAD has to offer. FreeCAD's Python functions are all well organized in different modules. Some of them are already loaded (imported) when you start FreeCAD. Just try:
- FreeCAD was originally designed to work with Python 2. Since Python 2 reached the end of its life in 2020, future development of FreeCAD will be done exclusively with Python 3, and backwards compatibility will not be supported.
- Much more information about Python can be found in the official Python tutorial and the official Python reference.