Interface Customization/it: Difference between revisions

From FreeCAD Documentation
(Created page with "# Deselezionare la casella di controllo davanti al nome della barra degli strumenti nel pannello a destra. # Una barra degli strumenti disabilitata è invisibile nell'interfac...")
(Created page with "====Aggiungere un comando====")
Line 146: Line 146:
# Una barra degli strumenti disabilitata è invisibile nell'interfaccia di FreeCAD.
# Una barra degli strumenti disabilitata è invisibile nell'interfaccia di FreeCAD.


====Add a command====
====Aggiungere un comando====


# Select the correct toolbar in the panel on the right. If no toolbar is selected, the command will be added to the first toolbar in the list.
# Select the correct toolbar in the panel on the right. If no toolbar is selected, the command will be added to the first toolbar in the list.

Revision as of 21:17, 17 June 2020

Introduzione

L'interfaccia di FreeCAD è basata sul moderno toolkit Qt, e dispone di una organizzazione ottimale. Alcuni aspetti dell'interfaccia possono essere personalizzati. Ad esempio, è possibile aggiungere barre degli strumenti personalizzate, con strumenti di diversi ambienti di lavoro o strumenti definiti nelle macro e creare le proprie scorciatoie da tastiera. Ma i menu e le barre degli strumenti predefinite fornite con FreeCAD e i suoi ambienti di lavoro non possono essere modificati.

La finestra di dialogo Personalizza

Utilizzo

  1. The commands available in the Customize dialog box depend on the workbenches that have been loaded in the current FreeCAD session. So you should first load all workbenches whose commands you want to have access to.
  2. There are several ways to invoke the Std DlgCustomize command:
    • Select the Tools → Customize... option from the menu.
    • Right-click a toolbar area and choose Customize... from the context menu.
  3. The Customize dialog box opens. For more information see Options.
  4. The Help button does not work at this time.
  5. Press the Close button to close the dialog box.

Opzioni

Nella finestra di dialogo Personalizza sono disponibili le seguenti schede:

Comandi

File:Std DlgCustomize tab Commands.png

La scheda Comandi

In questa scheda è possibile sfogliare i comandi disponibili.

Sfogliare i comandi

  1. Selezionare una categoria di comandi nel pannello Categoria a sinistra. Alcune categorie corrispondono alle voci del menu.
  2. Gli strumenti disponibili nella categoria selezionata sono mostrati nel pannello a destra.
  3. Passa il mouse su un comando: appare la descrizione del comando.
  4. Selezionare un comando: il testo della sua barra di stato viene visualizzato sotto i due pannelli.

Torna all'inizio

Tastiera

La scheda Tastiera

In questa scheda è possibile definire le scorciatoie da tastiera personalizzate. I collegamenti per i comandi delle macro possono essere definiti nella scheda Macro.

Aggiungere una scorciatoia personalizzata

  1. Selezionare una categoria di comando dall'elenco a discesa Categoria.
  2. Selezionare un comando dal pannello Comandi.
  3. La casella Scorciatoia corrente visualizza la scorciatoia corrente, se disponibile.
  4. Inserire una nuova scorciatoia nella casella di input Digita la nuova scorciatoia. La scorciatoia accetta fino a 4 input. Ogni input è un singolo carattere, una combinazione di uno o più tasti speciali o una combinazione di uno o più tasti speciali e un carattere. Usare Backspace per correggere gli errori.
  5. Se la scorciatoia è già in uso, una finestra di dialogo chiede se si desidera sostituirla e il comando a cui è assegnata la scorciatoia viene visualizzato nel pannello Attualmente assegnata a.
  6. Premere il pulsante Assegna per assegnare la nuova scorciatoia.
  7. Premere il pulsante Cancella per rimuovere il collegamento immesso. Questo rimuove anche il contenuto della casella Collegamento corrente. Notare che i collegamenti predefiniti non vengono rimossi in modo permanente. Sono ripristinati al riavvio di FreeCAD.

Rimuovere una scorciatoia personalizzata

  1. Selezionare una categoria di comando dall'elenco a discesa Categoria.
  2. Selezionare un comando dal pannello Comandi.
  3. Premere il pulsante Ripristina.

Rimuovere tutte le scorciatoie personalizzate

  1. Premere il pulsante Ripristina tutto.

Note (Tastiera)

  • Le scorciatoie funzionano solo se i loro comandi vengono visualizzati nel menu standard o nel menu di un ambiente di lavoro che è stato caricato nella sessione corrente di FreeCAD o se i loro comandi vengono visualizzati su una barra degli strumenti "visibile".
  • In V0.19 c'è un problema con alcuni comandi Draft. Le loro scorciatoie predefinite non funzionano e/o le scorciatoie personalizzate non possono essere assegnate.

Torna all'inizio

Ambienti di lavoro

File:Std DlgCustomize tab Workbenches.png

La scheda Ambienti

In questa scheda si può modificare l'ordine dell'elenco del selettore degli ambienti. L'elenco Ambienti abilitati mostra gli ambienti così come appaiono nel selettore.

Disabilitare un ambiente

  1. Selezionare un ambiente nell'elenco Ambienti di lavoro abilitati.
  2. Premere il pulsante .
  3. L'ambiente viene spostato nell'elenco Ambienti di lavoro disabilitati

Riabilitare un ambiente

  1. Selezionare un ambiente nell'elenco Ambienti di lavoro disabilitati.
  2. Premere il pulsante .
  3. L'ambiente viene spostato nell'elenco Ambienti di lavoro abilitati

Riabilitare tutti gli ambienti

  1. Premere il pulsante .

Cambiare la posizione di un ambiente

  1. Selezionare un ambiente nell'elenco Ambienti di lavoro abilitati.
  2. Premere il pulsante o il pulsante .
  3. Ripetere fino a quando l'ambiente non si trova nella posizione desiderata.

Ambienti in ordine alfabetico

  1. Premere il pulsante .

Torna all'inizio

Barre degli strumenti

La scheda Barre degli strumenti

In questa scheda è possibile creare e modificare barre degli strumenti personalizzate.

Selezionare l'ambiente

  1. Nell'elenco a discesa a destra selezionare l'ambiente di cui si desidera modificare le barre degli strumenti personalizzate. L'opzione Global è disponibile per le barre degli strumenti personalizzate che dovrebbero essere disponibili in tutti gli ambienti.

Creare una barra degli strumenti

  1. Premere il pulsante Nuovo ....
  2. Inserire un nome nella finestra di dialogo che si apre.
  3. Premere il pulsante OK.
  4. La nuova barra degli strumenti appare nel pannello a destra.

Rinominare una barra degli strumenti

  1. Selezionare una barra degli strumenti nel pannello a destra.
  2. Premere il pulsante Rinomina....
  3. Inserire un nuovo nome nella finestra di dialogo che si apre.
  4. Premere il pulsante OK.

Eliminare una barra degli strumenti

  1. Selezionare una barra degli strumenti nel pannello a destra.
  2. Premere il pulsante Elimina.

Disabilitare una barra degli strumenti

  1. Deselezionare la casella di controllo davanti al nome della barra degli strumenti nel pannello a destra.
  2. Una barra degli strumenti disabilitata è invisibile nell'interfaccia di FreeCAD.

Aggiungere un comando

  1. Select the correct toolbar in the panel on the right. If no toolbar is selected, the command will be added to the first toolbar in the list.
  2. Select a category from the dropdown list on the left. Macro commands that have been set up on the Macros tab appear in the 'Macros' category.
  3. Select a command from the panel on the left.
  4. Or select '<Separator>' to add a separator (a line between two toolbar buttons).
  5. Press button.

Remove a command

  1. If required, expand the toolbar in the panel on the right.
  2. Select a command.
  3. Press button.

Change a command position

  1. If required, expand the toolbar in the panel on the right.
  2. Select a command.
  3. Press the button or the button.
  4. Optionally repeat this until the command is in the correct position.

Notes (Toolbars)

  • Toolbars belonging to the current workbench are updated immediately, but after disabling/re-enabling a toolbar a workbench change is required (switch to a different workbench and then switch back).
  • To update global toolbars a workbench change (if commands have been added or removed) or a restart (if the order of a toolbar has changed or a toolbar was renamed) is required.
  • In V0.19 there is an issue with some Draft commands. After adding them to a custom toolbar and exiting the FreeCAD application the user.cfg file must be manually edited for these commands. Search for the name of the custom toolbar and in that section change the content of the FCText items that start with gui_ to DraftTools.

top

Macros

The Macros tab

On this tab user macro commands can be set up. Once set up, they can be added to custom toolbars. FreeCAD uses a dedicated folder for user macros and only macros in that folder can be set up. Use the Std DlgMacroExecute command to find this folder on your system.

If you download a macro with the Addon Manager then make sure that you also download its icon image file. Most macros have an image link on the information page that appears in the Addon Manager. You can for example put this image file in the user macros folder.

Add a macro command

  1. In the Macro dropdown list select a macro.
  2. Enter a Menu text. This will be the name used to identify the macro command and will also appear in the toolbar if there is no icon.
  3. Optionally enter a Tool tip. This text will appear near the location of the mouse when you hover the toolbar icon.
  4. Optionally enter a Status text. This text will appear in the status bar when you hover the toolbar icon.
  5. Optionally enter the wiki page for the macro, if available, in the What's this input box. Enter the page name, not the full URL.
  6. Optionally enter a shortcut in the Accelerator input box. See Keyboard for more information.
  7. To add an icon:
    1. Press the Pixmap ... button.
    2. The Choose Icon dialog box opens.
    3. If required press the Icon folders... button to add an icon folder.
    4. Select an icon from the panel. The Choose Icon dialog box closes automatically.
  8. Press the Add button.
  9. The macro command appears in the panel on the left.
  10. The macro command can now be selected on the Toolbars tab.

Remove a macro command

  1. Select the macro command in the panel on the left.
  2. Press the Remove button.

Change a macro command

  1. Double-click the macro command in the panel on the left.
  2. Make the required changes. Note that you cannot remove the icon, you can only replace it.
  3. Press the Replace button.

top

Spaceball Motion

This is tab is blank if no Spaceball is detected. See: 3Dconnexion input devices.

top

Spaceball Buttons

This is tab is blank if no Spaceball is detected. See: 3Dconnexion input devices.

top

Addons

Addons offer yet another way to customize the use interface. Below are some addons created by users in the FreeCAD community. They can be downloaded through the Addon Manager (note: they are listed on the Workbenches tab).

CubeMenu

Glass

IconThemes

Launcher

PieMenu

RemBench

ShortCut

top