Inspection Workbench/cs

From FreeCAD Documentation
Revision as of 21:50, 10 August 2018 by Renatorivo (talk | contribs) (Created page with "Category:User Documentation/cs")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

The Inspection Workbench is made to give you specific tools for examination of shapes. It is still in development.

Intended Workflow:

  • Visual Inspection can be done via the pull-down-menu in the top row.
  • Select two shapes to be compared and select Inspection > Visual Inspection from the menu.
  • The shapes should intersect as much as possible.
  • You will get a colored image showing the deviation between the two shapes.

Alternatively you could also use the macro HighlightDifference to compare two shapes.